20th International Conference on Composite Materials 19-24 July 2015 - Copenhagen, Denmark
ICCM20 Programme and book of abstracts
1
Component Testing for accelerated development cycles, increased safety and simulation verification
Find out more about non-contact measurement for composite materials, component and material testing. Visit us on our booth E-North 011 during ICCM20, July 20th – 22nd 2015 in Copenhagen.
www.gom.com
Content Welcome.....................................................................................................................................3 Venue overview ...................................................................................................................... 4 General Information............................................................................................................... 6 International Scientific Committee................................................................................. 10 Scientific programme............................................................................................................11 Programme at a glance....................................................................................................... 12 Plenary Speakers................................................................................................................... 18 Keynote Speakers.................................................................................................................. 19 Center Stage programme...................................................................................................20 Posters and mini-orals programme................................................................................. 22 Scientific programme........................................................................................................... 34 Index of authors...................................................................................................................104
Welcome Welcome to Copenhagen, Denmark and the 20th International Conference on Composite Materials (ICCM20). The conference is the 20th in the series of conferences of the International Committee on Composite Materials (ICCM). The series of ICCM conferences have gone from success to success since the first two conferences, both termed ICCM1 were held in 1975 in Geneva, Switzerland and Boston, USA. We are very proud and delighted to be organising the conference in Copenhagen, Denmark in 2015. It is the first time that an ICCM conference has been organised in Scandinavia. The scientific programme of the ICCM20 contains about 1450 presentations with full papers available in the conference proceedings, with the authors coming from 66 countries representing all three ICCM world regions, and with approximately 1800 registered participants. Thus, the ICCM20 is a truly international scientific event and the largest international conference in the field of composite materials to this date. We are looking forward to a technically excellent conference, and we are very grateful to the many organisers of the conference “Themes” and “Tracks” for helping us put the programme together. Their names are listed in the International Organising Committee that is printed in this book. More importantly, we are grateful to the authors for their efforts in producing their outstanding contributions to the programme. The full programme is printed in this book including very brief abstracts, but you may also want to use the online version of the programme and the proceedings containing the full papers www.ICCM20.org or the version we have for smartphones and tablets that is accessible through the special ICCM20 App. Please download the ICCM20 app at ITunes or Google Play. We hope that you will enjoy the conference and its many events, all of which are described in this book, and we also hope that you will enjoy your stay in Copenhagen. Conference updates on events and practical matters will be issued throughout the conference via TV screens placed throughout the conference venue (Bella Center) and through the conference App. If you require any assistance during the conference please do not hesitate to contact the ICCM20 secretariat or us for help. A special thanks to MCI Copenhagen and the Scandinavian Organising and Scientific Committee, without whom the conference would not have been possible.
Conference chairmen
Ole Thybo Thomsen Christian Berggreen Southampton University Technical University of & Aalborg University Denmark
Bent F. Sørensen Technical University of Denmark
Use this QR code to download the ICCM20 App and create your own profile
3
Venue overview Bella Center is an all modern state-of-the art congress and fair centre integrated with the largest hotel in Scandinavia, AC Hotel Bella Sky Copenhagen. A unique location in the middle of Ørestaden – with its own Metro station and surrounded by Scandinavia’s largest shopping mall, the Royal Golf Center and preserved nature - Bella Center ensures the best possible conditions for every type of event, only 10 minutes away from the centre of Copenhagen and Copenhagen International Airport. Visit Fields (Scandinavia’s largest shopping mall) here: www.fields.dk
GROUND FLOOR Ground Floor
M7
M8
M5
M6
M3
M4
M1
M2
First Floor
FIRST FLOOR 5
HALL A2 MINI-ORALS
REGISTRATION Access to Hotel Bella Sky Û
4
CLOAKROOM FOYER COFFEE/LUNCH POSTER AREA
Congress Center Entrance
18B AUDITORIUM 15
CONGRESS HALL A PLENARY
17 18A
Access to Hotel Bella Sky Û
AUDITORIUM 12
EXHIBITION
16
AUDITORIUM 11
STAGE 5
AUDITORIUM 10
STAGE 4
THE TREEHOUSE
Û
STAGE 3
SPEAKER READY ROOM
STAGE 2
Poster area
AUDITORIUM 15
STAGE 1
7
ea ar e ge ffe un co ch Lo ith lun w nd a
CENTER STAGE
6
18
19
20
THE TERRACE
Ac
Did you know that our 75 meter long blade is the biggest serial produced blade for wind turbines? Visit us at stand 001 at ICCM20 and learn more!
Think inside the box The new SWT-7.0-154 On the outside, our new 7 MW turbine isn’t new at all. But we found a smart way to significantly increase the energy output of our proven SWT-6.0-154. Instead of “thinking outside the box,” we actually thought “inside the box” and made some upgrades within the nacelle. Siemens’ unique experience with offshore wind power opens the door to fantastic opportunities. When we decided to improve the energy output of our largest offshore wind turbine, we used our expertise to approach product development in a new way. Instead of following the conventional wisdom, which tells us that “bigger is always better,” we started with a proven product. We looked closely
at every detail of the wind turbine and made as few upgrades as possible. Upgrades we knew would yield the greatest results – and so we created the new SWT-7.0-154. Do you think both inside and outside of the box? Then you might be our next colleague. At Siemens we highly value autonomous and independent employees. In addition you will become part of a team with talented peers giving you great professional development. We have many challenging open positions and we look forward to hearing how you can be part of the solution. Visit us at stand 001 at ICCM20 and hear more about our new 7 MW turbine and Siemens as a workplace.
5 The prototype in Østerild, Denmark was installed only a few months after the product launch at EWEA Offshore trade show in Copenhagen.
If you want to know more about what it is like to work and live in Denmark, please read more at www.siemens.dk/moving-to-denmark
www.siemens.dk/job
General Information Registration and Information desk opening hours
Emergency Services
In case of an emergency, please contact the staff at the Bella Center. Police – Ambulance – Fire Brigade - dial 112 Interacting by smartphone
Onsite registration is open: Sunday 19. July: 16.00 - 20.00 Monday 20 July: 7.30 - 18.00 Tuesday 21 July: 8.00 - 18.00 Wednesday 22 July: 8.00 - 18.00 Thursday 23 July: 8.00 - 18.00 Friday 24 July: 8.00 - 12.00
The ICCM20 app
Speaker Ready room opening hours
The Bella Center is a non-smoking facility
Sunday 19 July: 16.00 - 20.00 20 July: 7.30 - 17.00 WelcomeMonday to Copenhagen Tuesday 21 July: 7.30 - 17.00 - the capital of Denmark Wednesday 22 July: 7.30 - 15.00 Copenhagen is a great destination for a congress 23and July: - 15.00 of this size andThursday importance, the city7.30 is currently Friday 24 July: 7.30 11.00 amongst the most popular congress cities in -the world.
It is a vibrant metropolis, the gateway to Scandinavia and amongst the safest and cleanest cities in Exhibition opening hours the world. Copenhagen is very easy to get to and is, Monday 20 July: 9.30 - 18.00 with one of the most efficient transport systems in the in. In9.30 - 18.00 world, also veryTuesday 21 July: easy to get around 2008 and Wednesday 22 July:Monocle 9.30 -awarded 17.00 2013 the famous lifestyle magazine Copenhagen the title ‘Most Livable city in the world’.
Please download the ICCM20 app at ITunes or Google Play in order to receive important updates, vote during the sessions, receive reminders and to get evaluations directly on your smartphone
Official congress language
The official language is English. No simultaneous translation will be provided
Smoking policy
Social program and tours In addition to the scientific and professional contents of the conference a range of social opportunities for networking and for enjoying Wonderful Copenhagen and the surroundings will be provided. The social programme currently include Welcome Reception in Tivoli Gardens – one of the oldest amusement parks in the world. Tivoli is situated in the heart of Copenhagen. Conference Dinner with a Midsummer Theme in Bella Center and thus in close range of the delegate hotels.
Public Transportation Scandinavian Organizing and Copenhagen is known for its well-developed transportation system. Scientific committee Bella Center is located outside the city center but can be easily reached from both city center and airport by bus and Metro. Denmark: Bus: Bus 250S departs from Copenhagen Central Station and stops at Bella Center. Mrs. Helle Fabiansen Chief Consultant, Danish Plastics Metro: Metro line M1 (Vestamager) stops at Bella Center. Federation, Division of Composite Materials From Airport: From the airport the Bella Center can be reached by taking the M2 metro line to ChrisMr. Peter Kjær, CEO, New-Coat A/S & Danish Plastics tianshavn and then transfer with the M1 train to Vestamager, or by regional train (destination airport) to Federation, Division of Composite Materials Ørestad and then change for the Metro line for 1 stop. Dr. Konstantinos Anyfantis, University of Denmark, Tickets: Tickets Technical for public transport can be purchased at any train station, credit card ok, but on board Department of Mechanical Engineering the bus it is cash only.
Professor Janice Barton, Univ. of Southampton, UK & Aalborg Pre and post congress tours, sightseeing tours as well Internet Access As the oldest monarchy in the world and one of the University, Dept. of Mechanical and Manufacturing Engineering as a program for accompanying persons. Wireless internetthe is city complimentary world’s greatest design capitals offers a wide throughout the meeting. Network name: BC-guest. No password Dr. Povl Brøndsted, Technical University of Denmark, variety of cultural experiences and stunning architecrequired. Department of Wind Energy ture within its compact city centre. Dr. Kim Branner, Technical University of Denmark, Department of Copenhagen isCatering known as one of the most environWind Energy mentally friendly cities in the world and pollution is very Refreshments and lunch (lunch bags) will be provided in the exhibition area and in the Foyer during the Professor Erik Lund, Aalborg University, Department of low. With the dates of the ICCM20 being in the Mechanical and Manufacturing Engineering official coffee and lunch breaks. summer month of July the delegates will be visiting convenience, theand Bella Center has a kiosk open daily from 10 am, where you may purchase Professor Ryszard Pyrz, Aalborg University, Department of Copenhagen atFor oneyour of the most attractive food, drinks and necessaries. Mechanical and Manufacturing Engineering pleasantly warm times of year.
Copenhagen Airport is Northern Europe´s main traffic Sweden: of attendance hub with directCertificate flights from approximately 140 will issue a certificate of attendance upon request. destinations allThe overregistration the world. Indesk recent years Professor Leif Asp, Luleå University of Technology, Department Organization of the ICCM20 of Engineering Sciences and Mathematics, andHead of Research, Copenhagen Airport has won numerous prizes for Swerea SICOMP AB The ICCM20 is organized by the Scandinavian Orgaquality, design,Cloakroom customer satisfaction and efficiency. nizing and Scientific Committee which encompasses The Airport is situated on the island of Amager, eight Professor Dan Zenkert, Royal Institute of Technology, Please do not leave any bags or other personal belongings at any time, whether inside orDepartment of Aeronautical and Vehicle Engineering Aalborg Universityunattended (AAU), the Technical University kilometers South-east of Copenhagen. The city centre Shops theminutes sessions rooms. is Denmark located in the registration area. There is a fee of DKK 30,(DTU), the Danish Plastics Federation, can be reachedoutside within 12 by metro or The train.cloakroomof Professor The Janisshops Varna,in Luleå University of Technology, Copenhagen are open daily from 10.00 to 18.00, department stores and shopping malls Division of Composite Materials (Danish composites pr day andtime bothfrom cash and to credit This is the fastest transfer airport city card are accepted. Department of Engineering Sciences and Mathematics until 20.00. industry), along with Swedish and Norwegian key centre of any European capital city. Professor Kristofer Gamstedt, Uppsala University, researchers in the field of composite materials, and
Conference admission – delegate badge
Department of Engineering Sciences
will be allowed admission to sessions, exhibition or social events without a badge.
The Centre Danish Wallenberg Wood
finally the professional congress organizers Copenhagen Admission thefor ICCM20 is by badge only. MCI Carrying the badge is mandatory for all participants. No one Copenhagen. Professor Lars Berglund, Royal Institute of Technology, We look forward to seeingtoyou the ICCM20!
Professor Ole Thybo Thomsen,secretariat General Chair Congress
University of Southampton, UK & Aalborg University, Department of MCI Copenhagen Mechanical and Manufacturing Engineering
Conference Secretariat MCI Copenhagen
Project Manager: Lisbeth Vestergaard GroveVestre Gade 18 Associate Prof. Christian Berggreen, Program Chair DK-2605 Copenhagen Attn: ICCM20 Phone:Bröndby, +45 32472952 Technical University of Denmark, Dept. of Mechanical Engineering Vestre Gade 18, 1 Urgency: +45 Phone: +45 70 22 20782800 21 30 Professor Bent F. Sørensen, Scientific Chair
[email protected] 2605 Brøndby, Denmark @:
[email protected]
Technical University of Denmark , Department of Wind Energy
6
capital is busily turning itself into a dynamic and trendy metropolis, attracting attention with everything from exciting architecture to design, art and shopping. New fashion houses, food temples, trendy Professor Kristiina Oksman, Luleå University of Technology, boutiques and music venues are shooting up all over the city. Copenhagen has everything to offer - high Department of Applied Physics and Mechanical Engineering standard hotels, excellent shopping, a friendly population, a safe atmosphere and wonderful sightseeing. Norway:The city is vibrating with youthful exuberance while reveling in its fascinating history. Old historical buildings, modern design and dynamic new buildings and boutiques attract trendsetters and design conscious Professor Andreas Echtermeyer, Norwegian University of from allofover the world as Materials well as history and art lovers Science andpeople Technology, Dept. Engineering Designand Professor Brian Hayman, Oslo University, Department of Mathematics
General Information//
7
M1
//General Information Social programme
Social programme
Welcome Reception in Tivoli Gardens The Welcome Reception will take place Monday 20 July from 19.00 – 20.00 in Tivoli Gardens. Busses will depart from the Bella Center after the last sessions end around 18.00. Access to Tivoli, welcome drinks and snacks are included. Access is by badge only. Extra tickets purchased in advance will be handed out upon registration. Transportation back to your hotel is on your own.
Conference Dinner “Midsummer Dinner” The Conference Dinner will take place at the Bella Center Thursday 23 July in the exhibition area (Hall E). Welcome drinks will be served from 19.30 and the party ends at 23.30. Tickets for the Conference Dinner will be handed out upon registration. Please bring your ticket to participate in the dinner.
M2
Exhibition Stand No. Company name 1 Siemens Wind Power A/s
CENTER STAGE
2 ICCM21 / Chinese Society of Composite Materials 3 METRAVIB, ACOEM
4 5 6
6 MTS Systems GmbH 7 JEC 8 LaVision
TAGE A
HALL A2 SurfaceMINI-ORALS Measurement Systems
11 GOM / Zebicon A/S
1 2 3
12 Maney Publishing 13
14 Photron (Europe)Ltd.
STAGE B16
Correlated Solutions
STAGE C
17 ECCM17
18 ICCM22 BID/Brazil
STAGE D
19 FORCE Technology 20 Shimadzu Europa GmbH 21 Flir Systems 22 ICCM22 BID/Melbourne
8
HALL A1 PLENARY
STAGE E
EXHIBITION
7
11 12 16 17
13 8
14 19 18
20
21 22
Poster area
Û
5 Instron
ea ar e ge ffe un co ch Lo th un wi nd l a
4 DTU
Speaker ready room
General Information//
Special thanks for invaluable support in organizing the ICCM20 in Copenhagen:
ICCM ICCM Sponsors and Exhibitors
The Organising Committee gratefully acknowledge the support and participation of the following companies:
Platinum Sponsor: Silver Sponsors:
Bronze Sponsors:
Exhibitors:
FOCUS ON IMAGING
9
International Scientific Committee A
Adrian Mourits Alan K. T. Lau Albert Turon Alessandro Croce Alessandro Pegoretti Alex Kalamkarov Alexander Bismarck Andrea Bernasconi Andreas Echtermeyer Andrew Long
B
Bill Clyne Bo Madsen Brian Hayman Brian N. Cox Brian N. Legarth
C
Carlos D. Gonzalez Chiara Bisagni Christian Berggreen Christian Hühne Costas Soutis
D
Dan Zankert Daniel J. Inman Daniel Therriault Daniel Wagner David Kisailus
E
Edith Mäder Emile Greenhalgh Endel Iarve Erik Lund
F
Fabrice Pierron Federico Paris Francesca Cosmi Frank W. Zok Fredrik Fosberg Fu-Kuo Chang
G
Geoff Gibson Georg Mair Gergely Czel Giulio Alfano Golam Newaz Gregory M. Odegard Guijun Xian Göran Fernlund
H
Hans Lilholt Hatsuo Ishida Helga Füredi-Milhofer
I
Ichiro Taketa Ignaas Verpoest
J
Jacques Lamon Jae-Hung Han Frédéric Lani James P. Thomas Janice Barton Javier Llorca Jay Kudva Jeffery W. Baur Jim Thomason Jinsong Leng Joachim Hausmann Johan Hoefnagels John Botsis John Summerscales Jun Takahashi
K
K. H. Leong Karl Schulte Kim Branner Kim Kose Klaus Drechsler Kristofer Gamstedt
L
Larissa Gorbatikh Larry Dzral Lars Berglund Lars Chr. T. Overgaard B.-L. (“Les”) Lee Leif Asp
M
Maciej Wysocki Magnus Burman Marcin Kaminski Marino Quaresimin Mark Battley Martin Fagerström Masaki Hojo Mathias Stolpe Matt Jevons Michael William Hyer Michael Wisnom Miguel Ángel Rodríguez Pérez Minoru Taya Miroslav Cerny
N
Nancy R. Sottos Narayana R. Aluru Norbert Blanco
P
Paolo Ermanni Pascal Huber Pascal Lava Paul J. Falzon Paul Robinsson Paul Weaver Pedro Camanho Per Isaksson Per S. Heggem Peter Davies Peter Horst Peter Middendorf Peter Mitschang Philippe Boisse Philippe Noury Pierre Ladeveze
Q
Qingda Yang
R
Ralf Schledjewski Ramesh Talreja Ramzi Othman Remko Akkerman Richard A. Vaia Richard Trask Robert J Young Rogier Nijssen Rui Miranda Guedes
S
S. Mark Spearing Sam Kaddour Samit Roy Sayata Ghose Serge Abrate Shinji Ogihara Silvestre Pinho Simon Frost Soraya Piemente Staffan Lundström Stefan Hallström Stepan Lomov Stephen Pickering Steve Hallett Steven R. Nutt Su Su Wang Sung Ha Suong V. Hoa Suresh G. Advani Sylvain Drapier
T
Theodore P. Philippidis Thomas Kruse Tobias Wille Tom L. Andersen Tom Turner Tony Belcher
U
Urs Meier
V
Valter Carvelli Veronique Michaud Victor Birman
Scandinavian Organising and Scientific Committee
W
Denmark:
X
Xavier Balandraud
Professor Bent F. Sørensen, Scientific Chair, Technical University of Denmark
Y
Associate Professor Christian Berggreen, Program Chair, Technical University of Denmark
Wim van Paepegem
Yapa Rajapakse Yentl Swolfs
Z
Zafer Gürdal
Professor Ole Thybo Thomsen, General Chair, Southampton University & Aalborg University
Mr. Lars Friis Farsøe, The Danish Plastics Federation, Division of Composite Materials Dr. Povl Brøndsted, Technical University of Denmark, Department of Wind Energy Dr. Kim Branner, Technical University of Denmark, Department of Wind Energy Professor Erik Lund, Aalborg University, Department of Mechanical and Manufacturing Engineering Professor Janice Barton, Univ of Southhampton & Aalborg University, Department of Mechanical and Manufacturing Engineering Associate Professor Brian Nyvang Legarth,Technical University of Denmark, Department of Mechanical Engineering
Sweden:
Professor Leif Asp, Luleå University of Technology, Department of Engineering Sciences and Mathematics, and Head of Research, Swerea SICOMP AB Professor Dan Zenkert, Royal Institute of Technology, Department of Aeronautical and Vehicle Engineering Professor Janis Varna, Luleå University of Technology, Department of Engineering Sciences and Mathematics Professor Kristofer Gamstedt, Uppsala University, Department of Engineering Sciences Professor Lars Berglund, Royal Institute of Technology, Wallenberg Wood Centre Professor Kristiina Oksman, Luleå University of Technology, Department of Applied Physics and Mechanical Engineering
Norway:
Professor Andreas Echtermeyer, Norwegian University of Science and Technology, Department of Engineering Design and Materials Professor Brian Hayman, Oslo University, Department of Mathematics
10
Scientific programme The overall theme for the ICCM20 is “Sustainable Composite Solutions to Global Challenges”, which reflects the very important role that composite materials have in developing future sustainable low carbon foot print and low CO2 emission technologies that are so essential and a prerequisite for providing the basis for further development and improvement of the living conditions of the people of the world. The themes chosen for ICCM20 will cover all relevant aspects of the science and technology of composite materials included in but not limited to the overall professional theme areas of Nanocomposites, Structures and Design, Damage and Failure, Fatigue, Dynamic Effects, Novel Material Systems, Experimental Characterization, Health/Condition Monitoring, Smart/Adaptive Material Systems, Manufacturing, Applications as well as covering special sessions within education/skills/training and technology transfer.
How to navigate in the scientific programme Remember that you can also search for all presentations in your ICCM20 app. The session number is made of 4 digits: XYZZ X = day (Monday = 1, Tuesday = 2 …) Y = session number this day ZZ = room code The programme number is made of the above 4 digits and adding the order of the presentations in the session: XYZZ-VV X = day (Monday = 1, Tuesday = 2 …) Y = session number this day ZZ = room code VV = presentation order in the session In the printed program, the rooms located closely to each other are, see table below and venue map page 4. Room Break out room code
Room Break out room code
Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 Meeting room 19 Meeting room 20 Meeting room 17 Meeting room 16 Meeting room 5
Meeting room 6 Meeting room 7 M1 M2 M3 M4 M5 M6 M7 M8 Center Stage
01 02 03 04 05 06 07 08 09 10 11
12 13 14 15 16 17 18 19 20 21 22
How to navigate the poster and mini-oral programme The poster presentations at the ICCM20 are fully integrated in the scientific programme. The poster sessions will include a short 3 minutes long oral overview presentation (termed “mini-oral”) of each poster (maximum of 3 slides) given in plenum to the entire conference. This will be followed by a poster session that will take place in the Exhibition area and Foyer of the Bella Center and where the presented posters will be on display and open for discussion. The Posters are on display from Monday 20 July at 9.00 and until Wednesday 23 July at 16.30. The numbers in the mini-oral programme is also the number of the posters : the numbers are as follows: PXXZ-VV P=Poster XX = session – (session 100 from 9:30 and session 200 from 13:00) Z = Stage number for presentation (stages 1,2,3,4,5) VV = presentation order in the session (20 presentations in each session)
The Industry’s Composite Laboratory • • • • • •
Material selection Structural design Manufacturing processes Mechanical testing Chemical and thermal analysis Ultrasound and X-ray analysis
The Industry’s Composite Laboratory is a partnership lead by FORCE Technology, an Advanced Technology Group (GTS) providing development, consultancy and service within testing, sensors, materials, production optimisation etc. Visit us at the ICCM20 conference at stand no. 019!
THE INDUSTRY’S COMPOSITE LABORATORY
11
Programme at a glance Monday 20 July 8:30 8:50 9:45 10:15
12:15 13:30 15:00
Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 Meeting room 19 Opening Ceremony PETER SCALA LECTURE by: Ramesh Talreja, Texas A&M University, USA: Integration of manufacturing and failure analyses for sustainable design of composites COFFEE BREAK 1101 Processing 1102 Nano Compo1103 Multifunctional 1104 Fatigue 1 1105 Structural Analy- 1106 Processing 1107 Process Model- Manufacturing sites 1 Composites - Sensing sis and Optimization 1 - Preforming Techno- ling 1 Technology 1 and Actuation 1 logies LUNCH BREAK INDUSTRY SESSION - exhibitors will be presenting latest news in the industry 1201 Processing 1202 Nano Compo1203 Multifunctional 1204 Fatigue 2 1205 Structural Analy- 1206 Process Induced 1207 Process Model- Manufacturing sites 2 Composites - Sensing sis and Optimization 2 Effects 1 ling 2 Technology 2 and Actuation 2
16:20 16:40
COFFEE BREAK 1301 Processing - Manufacturing Technology 3
18:00
BUS DEPARTURE FOR the WELCOME RECEPTION AT TIVOLI GARDENS
1302 Nano Composites 3
1303 Multifunctional Composites - Sensing and Actuation 3
1304 Fatigue 3
1305 Structural Analy- 1306 Process Induced sis and Optimization 3 Effects 2
1307 Process Modelling 3
Meeting room 20
Meeting room 17
Meeting room 16
Meeting room 5
1108 Biocomposites 1
1109 Interfaces and Interphases 1
1110 Ceramic Matrix Composites
1111 Textile-Based Composites and Fibre Architecture 1
1208 Biocomposites 2
1209 Interfaces and Interphases 2
1210 Foams, Cellular 1211 Textile-Based and Lattice Materials 1 Composites and Fibre Architecture 2
1308 Biocomposites 3
1309 Interfaces and Interphases 3
1310 Foams, Cellular 1311 Textile-Based and Lattice Materials 2 Composites and Fibre Architecture 3
Meeting room 17
Meeting room 16
Tuesday 21 July 8:30 9:30
11:00 12:00 13:00
Poster Session in the Exhibition area and the Foyer LUNCH BREAK Mini Oral Session II in Congress Hall A2
14:10
Poster Session in the Exhibition area and the Foyer
15:00
2101 Processing - Manufacturing Technology 4 COFFEE BREAK 2201 Processing - Manufacturing Technology 5 END OF DAY
16:20 16:40
18:00
12
Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 Meeting room 19 Meeting room 20 PLENARY SPEECH by: S. Mark Spearing, University of Southampton, United Kingdom: High resolution computed tomography studies of composite materials: The data rich mechanics opportunity Mini Oral Session I in Congress Hall A2
Meeting room 5
2102 Nano Composites 4
2103 Multifunctional Composites - Sensing and Actuation 4
2104 Fatigue 4
2105 Structural Analy- 2106 Process Induced sis and Optimization 4 Effects 3
2107 Process Modelling 4
2108 Biocomposites 4
2109 Interfaces and Interphases 4
2110 Foams, Cellular 2111 Textile-Based and Lattice Materials 3 Composites and Fibre Architecture 4
2202 Nano Composites 5
2203 Multifunctional Composites - Sensing and Actuation 5
2204 Fatigue 5
2205 Structural Analy- 2206 Process Induced sis and Optimization 5 Effects 4
2207 Process Modelling 5
2208 Biocomposites 5
2209 Interfaces and Interphases 5
2210 Ductile and Pseudo-ductile Composites 1
2211 Textile-Based Composites and Fibre Architecture 5
Programme at a glance//
Monday 20 July Meeting room 6 Meeting room 7 M1 M2 M3 M4 M5 Opening Ceremony PETER SCALA LECTURE by: Ramesh Talreja, Texas A&M University, USA: Integration of manufacturing and failure analyses for sustainable design of composites COFFEE BREAK 1112 Graphene, 1113 Dynamic Material 1114 Fracture and 1115 Fracture and 1116 Fracture and Da- 1117 Constitutive 1118 Joints - Design, Graphene-Based Behaviour Damage - MicromeDamage - Laminate mage - Delamination 1 Models 1 Manufacturing and Composites 1 chanics 1 Scale 1 Testing 1 LUNCH BREAK INDUSTRY SESSION - exhibitors will be presenting latest news in the industry 1212 Graphene, 1213 X-ray Computed 1214 Fracture and 1215 Fracture and 1216 Fracture and Da- 1217 Constitutive 1218 Joints - Design, Graphene-Based Tomography 1 Damage - MicromeDamage - Laminate mage - Delamination 2 Models 2 Manufacturing and Composites 2 chanics 2 Scale 2 Testing 2 COFFEE BREAK 1312 Graphene, Graphene-Based Composites 3
1313 X-ray Computed Tomography 2
1314 Fracture and Damage - Micromechanics 3
1315 Fracture and Damage - Laminate Scale 3
1316 Fracture and Damage - Delamination 3
1317 Constitutive Models 3
1318 Joints - Design, Manufacturing and Testing 3
M6
M7
M8
Center Stage
1119 In-situ Micro-Mechanical Testing
1120 Applications Offshore and Subsea
1121 Multifunctional Composites - Energy Storage and Harvesting 1
1219 Applications Aerospace 1
1220 Applications Automotive and Rail 1
1221 Multifunctional Composites - Energy Storage and Harvesting 2
1222 Workshop: Applications - Industry Needs 1
1319 Applications Aerospace 2
1320 Applications Automotive and Rail 2
1321 Multifunctional Composites - Energy Storage and Harvesting 3
1322 Workshop: Applications - Industry Needs 2
M7
M8
Center Stage
BUS DEPARTURE FOR the WELCOME RECEPTION AT TIVOLI GARDENS
Tuesday 21 July Meeting room 6 Meeting room 7 M1 M2 M3 M4 M5 M6 PLENARY SPEECH by: S. Mark Spearing, University of Southampton, United Kingdom: High resolution computed tomography studies of composite materials: The data rich mechanics opportunity
2121 Special Symposium on active composites - 1
LUNCH BREAK 2321 Special Symposium on active composites - 2
2521 Special Symposium on active composites -3 2112 Graphene, Graphene-Based Composites 4 COFFEE BREAK 2212 Graphene, Graphene-Based Composites 5 END OF DAY
2113 X-ray Computed Tomography 3
2114 Fracture and Damage - Micromechanics 4
2115 Fracture and Damage - Laminate Scale 4
2116 Fracture and Damage - Delamination 4
2117 Pressure Vessels and Piping 1
2118 Joints - Design, Manufacturing and Testing 4
2119 Applications Aerospace 3
2120 Dynamic Fracture 1
2213 X-ray Computed Tomography 4
2214 Fracture and Damage - Micromechanics 5
2215 Fracture and Damage - Laminate Scale 5
2216 Fracture and Damage - Delamination 5
2217 Pressure Vessels and Piping 2
2218 Joints - Design, Manufacturing and Testing 5
2219 Applications Aerospace 4
2220 Applications - Bio & Medical 1
2122 Workshop on quality in scientific publication 1 2621 Special Symposium on active composites - 4
2222 Workshop on quality in scientific publication 2
13
//Programme at a glance Wednesday 22 July 8:30 9:30
Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 PLENARY SPEECH by: Yapa D. S. Rajapakse, Office of Naval Research, Virginia, USA: Extreme loading of composite materials in naval applications 3101 Processing 3102 Nano Compo3103 ONR Special 3104 Fatigue 6 3105 Structural Analy- 3106 Process Induced - Manufacturing sites 6 Symposium on Marine sis and Optimization 6 Effects 5 Technology 6 Composites 1
10:50
COFFEE BREAK
11:20
3201 Processing - Manufacturing Technology 7
13:00 14:00
15:20 15:40
Meeting room 19
Meeting room 20
Meeting room 17
Meeting room 16
Meeting room 5
3107 Process Modelling 6
3108 Fibre reinforcement
3109 Interfaces and Interphases 6
3110 Damage Tolerance of Composite Structures 1
3111 Textile-Based Composites and Fibre Architecture 6
3202 Nano Composites 7
3203 ONR Special Symposium on Marine Composites 2
3204 Fatigue 7
3205 Structural Analy- 3206 Process Induced sis and Optimization 7 Effects 6
3207 Process Modelling 7
3208 Biocomposites 6
3209 Interfaces and Interphases 7
3210 Damage Tolerance of Composite Structures 2
3211 Textile-Based Composites and Fibre Architecture 7
LUNCH BREAK 3301 Processing - Manufacturing Technology 8
3302 Nano Composites 8
3303 ONR Special Symposium on Marine Composites 3
3304 Fatigue 8
3305 Structural Analy- 3306 Process Induced sis and Optimization 8 Effects 7
3307 Process Modelling 8
3308 Biocomposites 7
3309 Recycling of Composites and Sustainability 1
3310 Damage Tolerance of Composite Structures 3
3311 Textile-Based Composites and Fibre Architecture 8
COFFEE BREAK 3401 Processing - Manufacturing Technology 9
3402 Nano Composites 9
3403 ONR Special Symposium on Marine Composites 4
3404 Fatigue 9
3405 Structural Analy- 3406 Experimental sis and Optimization 9 Methods for Process Characterisation 1
3407 Short Fibre Composites 1
3408 Biocomposites 8
3409 Recycling of Composites and Sustainability 2
3410 Damage Tolerance of Composite Structures 4
3411 Textile-Based Composites and Fibre Architecture 9
Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 Meeting room 19 Meeting room 20 PLENARY SPEECH by: Ignaas Verpoest, Katholieke Universiteit Leuven, Belgium: From fibres to tapes, from synthetic to natural fibres: a new generation of textile composites and their applications 4101 Processing 4102 Nano Compo4103 ONR Special 4104 Multifunctional 4105 Structural 4106 Experimental 4107 Fibres 1 4108 Biocomposites 9 - Manufacturing sites 10 Symposium on Marine Composites - Self-He- Analysis and OptimiMethods for Process Technology 10 Composites 5 aling and Bio-inspired zation 10 Characterisation 2 Designs 1 COFFEE BREAK 4201 Processing 4202 Nano Compo4203 ONR Special 4204 Multifunctional 4205 Structural 4206 Experimental 4207 Short Fibre 4208 Biocomposi- Manufacturing sites 11 Symposium on Marine Composites - Self-He- Analysis and OptimiMethods for Process Composites 2 tes 10 Characterisation 3 Technology 11 Composites 6 aling and Bio-inspired zation 11 Designs 2 LUNCH BREAK PLENARY SPEECH by: Jinsong Leng: Stimulus-responsive polymer composites: a path towards active shape changing structures 4301 Processing 4302 Nano Compo4303 ONR Special 4304 Multifunctional 4305 Applications 4306 Experimental 4307 Short Fibre 4308 Biocomposi- Manufacturing sites 12 Symposium on Marine Composites - Self-He- Bio & Medical 2 Methods for Process Composites 3 tes 11 Technology 12 Composites 7 aling and Bio-inspired Characterisation 4 Designs 3 COFFEEBREAK 4401 Processing 4402 Nano Compo4403 Sandwich Struc- 4404 Multifunctional 4405 Applications 4406 Experimental 4407 Textile-Based 4408 BiocomposiMethods for Process Composites and Fibre tes 12 - Manufacturing sites 13 tures and Materials 3 Composites - Self-He- Bio & Medical 3 Technology 13 aling and Bio-inspired Characterisation 5 Architecture 10 Designs 4 Conference dinner at Bella Center, Exhibtion Area END OF DAY
Meeting room 17
Meeting room 16
Meeting room 5
4109 Liquid Composites Moulding 1
4110 Sandwich Structures and Materials 1
4111 Multifunctional Composites - Adaptive Response and Reconfiguration 3
4209 Liquid Composites Moulding 2
4210 Sandwich Structures and Materials 2
4211 Multifunctional Composites - Coupled Properties and Multi-physics Models 1
4309 Recycling of Composites and Sustainability 3
4310 Fibres 2
4311 Multifunctional Composites - Adaptive Response and Reconfiguration 4
4409 Recycling of Composites and Sustainability 4
4410 Fibres 3
4411 Multifunctional Composites - Adaptive Response and Reconfiguration 5
16:50 17:15 19:15
General Assembly END OF DAY
Thursday 23 July 8:30 9:30
10:50 11:20
13:00 14:00 15:00
16:20 16:40
19:30 23:30
14
Programme at a glance// Wednesday 22 July Meeting room 6 Meeting room 7 M1 M2 M3 M4 PLENARY SPEECH by: Yapa D. S. Rajapakse, Office of Naval Research, Virginia, USA: Extreme loading of composite materials in naval applications 3112 Graphene, 3113 Matrix Materials 1 3114 Fracture and 3115 Models Homo3116 Nanocomposites 3117 Ductile and Graphene-Based Damage - Materials genization – Micro to for Structural LightPseudo-ductile ComComposites 6 Scale 1 Macro 1 weight - Modelling and posites 2 Testing 1 COFFEE BREAK
M5
M6
M7
M8
Center Stage
3118 Fire Resistance 1
3119 Applications Aerospace 5
3120 New Structural Testing Methods 1
3121 Multifunctional Composites - Sensing and Actuation 6
3122 Tsai Award 1
3212 Graphene, Graphene-Based Composites 7
3213 Matrix Materials 2 3214 Fracture and Damage - Micromechanics 6
3215 Models Homogenization – Micro to Macro 2
3216 Fracture and Damage - Delamination 6
3217 Ductile and Pseudo-ductile Composites 3
3218 Fire Resistance 2
3219 Applications Aerospace 6
3220 New Structural Testing Methods 2
3221 Multifunctional Composites - Adaptive Response and Reconfiguration 1
LUNCH BREAK 3312 Graphene, Graphene-Based Composites 8
3313 Matrix Materials 3 3314 Fracture and Damage - Materials Scale 2
3315 Models Homogenization – Micro to Macro 3
3316 Nanocomposites for Structural Lightweight - Modelling and Testing 2
3317 Ductile and Pseudo-ductile Composites 4
3318 Fire Resistance 3
3319 Applications Civil Engineering 1
3320 New Structural Testing Methods 3
3321 Multifunctional Composites - Adaptive Response and Reconfiguration 2
3322 Workshop on Failure of composites: current status and future directions 1
3413 Matrix Materials 4 3414 Fracture and Damage - Materials Scale 3
3415 Models Homogenization – Micro to Macro 4
3416 Nanocomposites for Structural Lightweight - Modelling and Testing 3
3417 Manufacturing Up-Scaling and Automation 1
3418 Sensors in Experi- 3419 Applications mental Mechanics 1 Civil Engineering 2
3420 New Structural Testing Methods 4
3421 Multifunctional Composites - Smart Structures 1
3422 Workshop on Failure of composites: current status and future directions 2 Industry Session JEC Group
M7
M8
Center Stage
COFFEE BREAK 3412 Foams, Cellular and Lattice Materials 4
‘Young scientist award’ - The Danish Plastics Federation – Composite Division 3222 Tsai Award 2
General Assembly END OF DAY
Thursday 23 July Meeting room 6 Meeting room 7 M1 M2 M3 M4 M5 M6 PLENARY SPEECH by: Ignaas Verpoest, Katholieke Universiteit Leuven, Belgium: From fibres to tapes, from synthetic to natural fibres: a new generation of textile composites and their applications 4112 Composites with 4113 Ductile and 4114 Models Homo4115 Identification 4116 Dynamic Fracture 4117 Manufacturing 4118 Multiscale Model- 4119 Applications Metallic Components 1 Pseudo-ductile Comgenization – Micro to using Full-Field Mea2 Up-Scaling and Autoling of Structures 1 Wind, Wave and Tidal posites 5 Macro 5 surements mation 2 Energy 1 COFFEE BREAK 4212 Composites with Metallic Components 2
4213 Hybrid Composites 1
4214 Fracture and Damage - Materials Scale 4
4215 Digital Image Correlation 1
4216 Durability, Creep and Agressive Environment 1
4217 Manufacturing Up-Scaling and Automation 3
LUNCH BREAK PLENARY SPEECH by: Jinsong Leng: 404 Stimulus-responsive polymer composites: a path towards active shape changing structures 4312 Composites with 4313 Hybrid Compo4314 Simulation of 4315 Digital Image 4316 Durability, Creep 4317 Impact and Metallic Components 3 sites 2 Progressive Failure 1 Correlation 2 and Agressive Environ- Dynamic Structural ment 2 Analysis 1 COFFEE BREAK 4412 Composites with Metallic Components 4
4413 Hybrid Composites 3
4414 Simulation of Progressive Failure 2
4415 Digital Image Correlation 3
4416 Dynamic Fracture 3
4417 Impact and Dynamic Structural Analysis 2
4120 Sensors in Experi- 4121 Multifunctional mental Mechanics 2 Composites - Smart Structures 2
4218 Multiscale Model- 4219 Applications ling of Structures 2 Wind, Wave and Tidal Energy 2
4220 Sensors in Experi- 4221 Multifunctional mental Mechanics 3 Composites - Smart Structures 3
4318 Multiscale Model- 4319 Applications ling of Structures 3 Ships and Boats
4320 Thermography 1
4321 Multifunctional Composites - Processing and Integration 1
4418 Multiscale Model- 4419 Applications ling of Structures 4 Civil Engineering 3
4420 Thermography 2
4421 Multifunctional Composites - Processing and Integration 2
Conference dinner at Bella Center, Exhibtion Area END OF DAY
15
//Programme at a glance Friday 24 July 8:30 9:30
Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 Meeting room 19 PLENARY SPEECH by: Richard A. Vaia, Air Force Research Laboratory, Ohio, USA - Materials for future aerospace technologies: Challenges and opportunities 5101 Processing 5102 Nano Compo5103 Sandwich Struc- 5104 Fatigue 10 5106 Manufacturing 5107 Processing - Manufacturing sites 14 tures and Materials 4 Up-Scaling and - Manufacturing Technology 14 Automation 4 Technology 16
10:50 11:20
COFFEE BREAK 5201 Processing - Manufacturing Technology 15
13:00 14:00
LUNCH BREAK Closing Ceremony GOODBYE AND HOPE TO SEE YOU IN 2017 FOR THE ICCM21!
5202 Nano Composites 15
5203 Sandwich Structures and Materials 5
5204 Multifunctional Composites - Self-Healing and Bio-inspired Designs 5
5205 Structural Design Criteria, Safety and Reliability
5206 Experimental Methods for Process Characterisation 6
5207 Liquid Composites Moulding 3
Meeting room 20
Meeting room 17
Meeting room 16
Meeting room 5
5108 Short Fibre Composites 4
5109 Process Induced Effects 8
5110 Fibres 4
5111 Multifunctional Composites - Coupled Properties and Multi-physics Models 2
5208 Short Fibre Composites 5
5209 Recycling of Composites and Sustainability 5
5210 Fibres 5
5211 Multifunctional Composites - Coupled Properties and Multi-physics Models 3
M6
M7
M8
Center Stage
5119 Applications Civil Engineering 4
5120 Ultrasound and Acoustic Emission
Friday 24 July 8:30 9:30
10:50 11:20
13:00 14:00
16
Meeting room 6 Meeting room 7 M1 M2 M3 M4 M5 PLENARY SPEECH by: Richard A. Vaia, Air Force Research Laboratory, Ohio, USA - Materials for future aerospace technologies: Challenges and opportunities 5112 Tribology and 5113 Damage Tole5115 Durability, 5117 Impact and 5114 Simulation of 5116 Dynamic 5118 Applications Wear rance of Composite Progressive Failure 3 Creep and Agressive Fracture 4 Dynamic Structural Automotive and Rail 3 Structures 5 Environment 3 Analysis 3 COFFEE BREAK 5217 Impact and 5218 Hybrid Compo5212 Matrix materials 5213 Damage Tole5214 Simulation of 5215 Durability, 5 rance of Composite Progressive Failure 4 Creep and Agressive Dynamic Structural sites 4 Structures 6 Environment 4 Analysis 4 LUNCH BREAK Closing Ceremony GOODBYE AND HOPE TO SEE YOU IN 2017 FOR THE ICCM21!
5219 Applications Civil Engineering 5
17
Plenary Speakers Ramesh Talreja (Peter Scala award)
Department of Aerospace Engineering at Texas A&M University, USA Ramesh Talreja’s research career began in 1978 with a project dealing with fatigue of wind turbine blades made of glass/polyester for the Danish Wind Energy programme. His work over the next seven years led to the monograph, “Fatigue of Composite Materials”, and continued with contributions to the field of damage and failure of composite materials. After more than fifteen years on the faculty of the Technical University of Denmark, he moved to the United States to join Georgia Institute of Technology as a professor of Aerospace Engineering, and 10 years later, to head the Department of Aerospace Engineering at Texas A&M University. Professor Talreja has written numerous papers, book chapters, and most recently, the book, “Damage and Failure of Composite Materials” (with C.V. Singh), while serving on the editorial boards of 15 journals and editing several book volumes. His current interests are in cost-effective manufacturing of composites through engineering of defects.
Monday 20 July at 8.50 - PETER SCALA LECTURE: Integration of manufacturing and failure analyses for sustainable design of composites
Ignaas Verpoest
Department of Materials Engineering, Katholieke Universiteit Leuven (KU Leuven), Belgium Prof. Ignaas VERPOEST was a full professor at the Katholieke Universiteit Leuven (Belgium and guiding a group of 8 postdoc researchers and 25 PhD-students. He is the author of more than 210 journal papers, about 500 conference papers and 3 books, and holds 15 patents. Since September 2013, Ignaas Verpoest is emeritus professor at KU Leuven. Prof. Verpoest is holder of the Toray Chair in Composite Materials at KU Leuven. He was President of the European Society for Composite Materials (ESCM), and of the International Committee on Composite Materials. Prof. Ignaas Verpoest won several awards, amongst others the Descartes Prize for Science Communication of the European Commission (2004), the International Fellowship of the Society for the Advancement of Materials Processing and Engineering (SAMPE, 2009) and of the International Committee on Composite Materials (ICCM, 2009). In 2014, he was awarded the ‘Medal of Excellence in Composite Materials’ of the University of Delaware. He is also co-founder and board member of the company Econcore, worldwide producer of innovative honeycomb cores.
Thursday 23 July at 8:30 - From fibres to tapes, from synthetic to natural fibres: a new generation of textile composites and their applications
Yapa D. S. Rajapakse
Programme Manager, Solid Mechanics, Office of Naval Research (ONR), USA Dr. Rajapakse manages the ONR Solid Mechanics Programme, with the current focus on Mechanics of Marine Composites and Composite Sandwich Structures. He received his Ph. D. degree in Applied Mechanics (Advisor: J.N. Goodier), and a M. S. degree in Mathematics, from Stanford University. He is a Fellow of 4 technical societies: American Society of Mechanical Engineers (ASME), Society of Engineering Science (SES), American Society for Composites (ASC), and American Academy of Mechanics. He has served on several Editorial Boards of technical journals, including Composites Science and Technology, J. Sandwich Structures and Materials, J. Composite Materials, and Composites Part B. He has served SES as President, Vice-president, Member-Board of Directors. He has served ASME as Chairman of the Composite Materials Committee of the Applied Mechanics Division, and ASC as Chairman of the Polymer-Matrix Composites Division. He has organized ONR Symposia at the last four ICCM conferences. He has edited/coedited 32 books (e.g. Dynamic Failure of Materials and Structures, Blast Mitigation: Experimental and Numerical Studies).
Wednesday 22 July at 8:30 - Extreme loading of composite materials in naval applications 18
Jinsong Leng
Center for Smart Materials and Structures at Harbin Institute of Technology, China Prof. Leng is Cheung Kong Chair Professor and Director of the Center for Smart Materials and Structures at Harbin Institute of Technology, China. His researches cover Sensors & Actuators, Stimulus Responsive Polymers (Shape Memory and Electro-Active Polymers) and their composites, Multifunctional Nanocomposites, Active Vibration Control, Structural Health Monitoring, and Active Morphing Structures. Prof. Leng has authored or co-authored over 260 scientific papers, 8 books/chapters, 29 issued patents and 15 pending patents. He is editor in Chief of International Journal of Smart and Nano Materials, Associate Editor of Smart Materials and Structures and Journal of Intelligent Materials Systems and Structures, and editorial board member of Composites A. Prof. Leng has been elected as an Executive Council Member of ICCM, Fellow of SPIE, Fellow of Institute of Physics (IOP), Fellow of Royal Aeronautical Society (RAeS), Fellow of Institute of Materials, Minerals, and Mining (IMMM) and Associate Fellow of AIAA.
Thursday 23 July at 14:00 - Stimulus-responsive polymer composites: a path towards active shape changing structures
S. Mark Spearing
School of Engineering Sciences, Southampton University. UK Mark Spearing is Professor of Engineering Materials in the School of Engineering Sciences at Southampton University. He has served as Head of the School of Engineering Sciences and currently as Provost and Pro Vice-Chancellor (International) for the University. Prior to his appointment at Southampton he was a Professor of Aeronautics and Astronautics at the Massachusetts Institute of Technology, from 1994-2004. His technical interests include advanced composites materials, processes and structural analysis, design of Micro- and Nano-Systems, electronic packages and structural health monitoring. His work in composite materials has focused on understanding damage and failure processes with the aim of producing mechanism-based models to guide material development and design methods. He has been working in the field of composite materials since 1986, and attended his first ICCM in London in 1987. Spearing is an editor of the Journal of Composite Materials and also of Journal of Microelectromechanical Systems. He has published over 170 technical publications, including more than 100 in refereed journals. He holds five patents. In 2004 he received a Royal Society-Wolfson Research Merit Award.
Tuesday 21 July at 8:30 - High resolution computed tomography studies of composite materials: The data rich mechanics opportunity
Richard A. Vaia
Functional Materials Division of the Materials and Manufacturing Directorate, U.S. Air Force Research Laboratory (AFRL) Richard A. Vaia is the Technology Director of the Functional Materials Division of the Materials and Manufacturing Directorate at the U.S. Air Force Research Laboratory (AFRL). The Division delivers functional materials and processing solutions that revolutionize AF aircraft, spacecraft, launch vehicles, and their structural, electronic and optical components. Rich serves on numerous editorial boards, Board of Directors and external review panels, and has authored over 200 peer-reviewed papers and patents on polymer nanocomposites, complex nanoparticle architectures and their impact on developing adaptive soft matter. He received his PhD in Materials Science and Engineering at Cornell University in 1995, and is a Fellow of the Materials Research Society, American Physical Society, American Chemical Society (PMSE Division), and the Air Force Research Laboratory.
Friday 24 July at 8:30 - Materials for future aerospace technologies: Challenges and opportunities
Keynote Speakers Monday 20 July Time
Programme Presenter number 10:15-10:55 1108-1 Larry Lessard, Aart van Vuure 10:15-10:55 1111-1 Valter Carvelli
10:15-10:55 1118-1 15:00-15.40 1203-1
Evangelos Ioannis Avgoulas Fu-Kuo Chang
15:00-15.40 1221-1
Emilie Greenhalgh
16.40-17.20 1306-1
Göran Fernlund
Title
Room
FATIGUE BEHAVIOUR OF WOVEN FLAX/EPOXY COMPOSITES
Meeting Room 20
FATIGUE PERFORMANCE OF MICRO-FIBRILLATED CELLULOSE AND RUBBER NANOPARTICLE HYBRID EPOXY RESIN REINFORCED CARBON PLAIN WEAVE NUMERICAL AND EXPERIMENTAL INVESTIGATION OF CFRP TO PERFORATED STEEL JOITNS A COMPOSITE INTELLIGENT WING WITH STATE-SENSING AND AWARENESS CAPABILITIES RECENT ADVANCES IN STRUCTURAL SUPERCAPACITORS FOR TRANSPORT APPLICATIONS BULK AND SURFACE POROSITY IN OUT-OF-AUTOCLAVE PREPREGS
Meeting Room 5
RECENT DEVELOPMENTS OF DISCRETE MATERIAL OPTIMIZATION OF LAMINATED COMPOSITE STRUCTURES CHARACTERIZATION OF FATIGUE R-CURVES BASED ON GMAX-CONSTANT DELAMINATION TESTS IN CF/PEEK LAMINATES POWERFUL ARTIFICIAL MUSCLES FOR MORPHING COMPOSITES HIGH PERFORMANCE PSEUDO-DUCTILE COMPOSITES BONDING OF CFRP PRIMARY AEROSPACE STRUCTURES – CRACKSTOPPING IN COMPOSITE BONDED JOINTS UNDER FATIGUE
Auditorium 12
M5 Auditorium 10 M8 Meeting Room 18
Tuesday 21 July 15:00-15:40 2105-1
Erik Lund
15:00-15:40 2116-1
Masaki Hojo
16:40-17:20 2203-1 16:40-17:20 2210-1 16:40-17:20 2219-1
Ray Baughman Michael Wisnom Thomas Kruse
M3
Auditorium 10 Meeting Room 16 M6
Wednesday 22 July 9:30-10:10
3103-1
9:30-10:10
3112-1
DEFORMATIONS DUE TO EXPLOSIVE AND IMPLOSIVE LOADS OF SANDWICH CYLINDERS USING THIRD ORDER SHEAR AND NORMAL DEFORMABLE THEORY (TSNDT) Ian Kinloch STRUCTURAL GRAPHENE COMPOSITES: TAKING THE LESSONS OF FUNDAMENTAL STUDIES THROUGH TO BULK COMPOSITES Marino Quaresimin MICROSCOPIC DAMAGE EVOLUTION IN OFF-AXIS PLIES UNDER FATIGUE LOADING Pedro Camanho CONSTITUTIVE MODELING AND EXPERIMENTAL CHARACTERIZATION OF THE NON-LINEAR STRESS-STRAIN BEHAVIOR OF UNIDIRECTIONAL CARBON-EPOXY UNDER HIGH STRAIN RATES Mike J. Hinton, Sam FAILURE OF COMPOSITE: STATUS AND FUTURE DIRECTION Kaddour Dayakar Penumadu CHARACTERIZATION OF SINGLE CARBON FIBER MECHANICAL BEHAVIOR BY NANO-TENSILE TESTING
Auditorium 10
11:20-12:00 4201-1 11:20-12:00 4206-1
Peter Mitschang Timotei Centea, Steven Nutt
Congress Hall A1 Meeting Room 18
11:20-12:00 4211-1
Somnath Ghosh
11:20-12:00 4218-1 16:40-17:20 4419-1 16:40-17:20 4421-1
Brian Cox Urs Meier Scott White
11:20-12:00 3204-1 11:20-12:00 3210-1
14:00-14:40 3322-1 15:40-16:00 3403-1
Romesh Batra
Meeting Room 6 Auditorum 11 Meeting Room 16
Center Stage Auditorium 10
Thursday 23 July IMPREGNATION PERFORMANCE OF NON-ISOBARIC PROCESSES MULTI-SCALE MATERIAL AND PROCESS CHARACTERIZATION FOR RESIN TRANSFER MOLDING: CASE STUDY FOR A BLENDED EPOXY/PHENOLIC RESIN MULTI-SCALE COMPUTATIONAL MODELING FRAMEWORK FOR COUPLED ELECTROMAGNETICS AND MECHANICAL SIMULATIONS IN MULTIFUNCTIONAL MATERIALS STOCHASTIC VIRTUAL TESTS FOR FIBER COMPOSITES LONG TERM RELIABILITY OF CFRP IN BRIDGE ENGINEERING MULTIFUNCTIONAL MICROVASCULAR COMPOSITES
LET LM WIND POWER YOUR CAREER
Meeting Room 5
M5 M6 M8
Friday 24 July 11:20-12:00 5204-1
Nancy Sottos
11:20-12:00 5210-1
Yuris Dzenis
SINGLE CHANNEL MICROVASCULAR DELIVERY FOR SELF-HEAL- Auditorum 11 ING POLYMER COMPOSITES SIMULTANEOUSLY STRONG AND TOUGH CONTINUOUS Meeting Room 16 NANOFIBERS: NEXT GENERATION REINFORCEMENT FOR NEW STRUCTURAL SUPERCOMPOSITES?
lmwindpower.com
Center Stage programme Monday 20 July
Tuesday 21 July Center Stage
Center Stage 15:00
1222 Introduction of Industry Needs Workshop and Scope
15:05
1222-1 ANALYSIS-ENABLED PRODUCTION AND PERFORMANCE OF COMPOSITE WING STRUCTURES Richard Newley (GKN Aerospace), Richard Butler (University of Bath)
15:00
2122 Workshop on quality in scientific publication 1 Background and motivation for the workshop: Many scientists feel that the scientific culture of publication and peer review is close to collapse, in the sense that the amount of papers published is increasing dramatically while the overall quality of the published papers may not be at the same high level as was generally perceived in previous times. Many consider this to be a threat to the scientific culture at large. A pessimistic view is that this development threatens to undermine the entire scientific progress in general, and further poses a serious threat to the survivability of the peer review publication system in the long term. There are a number of issues: • Editors perspective: For example - The same manuscript is sometimes found to be submitted simultaneously to multiple journals. The review process does not work properly. • Reviewers perspective: Reviewers often receive manuscripts for review that are of poor quality - the impression that possibly a student wrote the manuscript without guidance and thorough review from the supervisor is not uncommon. Poorly prepared manuscripts that include elementary mistakes are sent for review. • Readers perspective: As an example a massive growth in the quantity of scientific publications in the field of composite materials has been experienced over the last years. Part of this may be due to increased activity in the research area at large, but the general quality of the papers by some is perceived to be declining (quantity over quality). Part of the explanation could be that not all reviews are being conducted with sufficient care and scrutiny to detail. Another issue is that the underlying mechanism that seem to be driving this development is the increasing pressure on scientists to publish many articles (quantity over quality); universities count publications and citations; scientific journals compete on impact factors, etc. The issues outlined above will be discussed in this Workshop. 2222 Workshop on quality in scientific publication 2
The GKN - University of Bath partnership developments, such as FE formulations for laminate forming have already influenced manufacturing. New laminate rules will take longer to implement in design. 15:15
Panel Discussion Part 1
15:30
1222-2 EFFICIENT TRANSFER OF PROMISING RESEARCH RESULTS TO INDUSTRIAL APPLICATIONS USING ADAPTIVE PROCESSES Jan Bremer (BCT GmbH) Adaptive machining enables scalability and stability of fully automated processes. This is key to permit efficient transfer of research to industry, as for example in automated composite repair.
15:40
1222-3 A MULTIFUNCTIONAL DEVICE APPLYING FOR THE SAFE MAINTENANCE AT HIGH-ALTITUDE ON WIND TURBINES Peter Dahmann (Aachen University of applied Sciences), Stephan Kallweit (Aachen University of applied Sciences), Mohsen Bagheri (Aachen University of applied Sciences), Joseph Schleupen (Aachen University of applied Sciences) Developing this multifunctional climbing device, for scanning, repair and transportation, combines all the existing maintenance solutions for wind turbine blades into one weather-independent platform.
15:50
Panel Discussion Part 2
16:10
1222-4 OPTIMIZATION OF COMPOSITE ICE HOCKEY STICK DESIGN THROUGH FINITE ELEMENT ANALYSIS Adam Gans (Bauer Performance Sports)
16:40
FEA is intrinsic to the design of composite sporting goods. We look to develop new measuring methods, a broader database of material properties, and better tools to predict performance and failure.
Wednesday 22 July
1322-1 STANDARD QUALIFICATION PLAN DEVELOPED TO ENCOURAGE INNOVATION OF NEW MATERIALS AT LOWER COSTS Michael Gower (NPL), Graham Sims (National Physical Laboratory)
9:30
16:20
Center Stage
3122-1 MICROMECHANICAL CHARACTERISAZION OF FATIGUE DAMAGE INITIATION AND PROPAGATION IN CFRP USING SYNCHROTRON RADIATION COMPUTED TOMOGRAPHY Serafina Consuelo Garcea (University of Southampton), Ian Sinclair (University of Southampton), Simon Mark Spearing (University of Southampton)
The development and experimental validation of a Standard Qualification Plan (SQP), satisfying minimum common requirements, to reduce the substantial cost of qualifying new composites is reviewed. 16:30
Panel Discussion Part 3
17:00
1322-2 ENABLERS FOR THE INDUSTRIALIZATION OF INFUSION PROCESSES: MERGING RESEARCH AND APPLICATION DRIVEN EXPECTATIONS Paulin Fideu (Airbus ), Hauke Seegel (Composite Technology Center CTC GmbH), Claus Fastert (Composite Technology Center CTC GmbH), Cyrille Collart (Airbus )
Micromechanisms of fatigue damage have been assessed using in situ and ex situ X-ray computed tomography. Fibre failures along the 0˚ ply splits and in the bulk composite were detected and quantified. 3122-2 A MULTISCALE DAMAGE INITIATION MODEL FOR CNT-ENHANCED EPOXY POLYMERS Nithya Subramanian (Arizona State University), Ashwin Rai (Arizona State University), Aditi Chattopadhyay (Arizona State University)
This paper presents the needs for the industrialization of infusion processes. Based on selected examples, remaining challenges are discussed and some solution approaches are proposed.” 17:10
1322-3 CHALLENGES OF INDUSTRIALISATION IN CFRP-ASSEMBLY IN AEROSPACE INDUSTRY Joachim Piepenbrock (Composite Technology Center GmbH), Alexander Engels (Composite Technology Center GmbH)
17:20
Panel Discussion Part 4
17:45
Strategic direction and inuiting participants to continue participating through emails, app etc.
18:00
End of session
Multiscale framework simulates inelastic behavior of CNT-epoxy polymers at the molecular level due to bond dissociation and integrates atomistic data with continuum damage mechanics at microscale. 3122-3 ENABLING FASTER STRUCTURAL DESIGN: EFFICIENT MULTISCALE SIMULATION OF LARGE COMPOSITE STRUCTURES Luigi Gigliotti (Imperial College London), Silvestre Pinho (Imperial College London) Novel Multiscale PBCs, exploiting symmetries in solid-to-shell homogenization of periodic structures, are presented. These reduce modelling (85%) and analysis (89%) CPU times very significantly. 10:50
20
3122 Tsai Award 1
‘Young scientist award’ - The Danish Plastics Federation – Composite Division The Danish Plastics Federation – Composite Division is every year awarding a talented young scientist that has impressed with a project related to composite. This year’s winner is the 29 year old Ismet Baran, assistant professor at the University of Twente, NL. He finished his PhD study from DTU Mechanical Engineering in 2014 with the thesis ‘Modelling the pultrusion process of off shore wind turbines blades’.
Center Stage programme//
Wednesday 22 July
Wednesday 22 July
Center Stage 11:20
3222 Tsai Award 2
Center Stage 14:40
3222-1 AN INVESTIGATION ON HYBRID INTERFACE USING ON-LINE MONITORING EXPERIMENT AND FINITE ELEMENT ANALYSES Hieu Truong (Texas A&M University), Marcias Martinez (Delft University of Technology), Ozden Ochoa (Texas A&M University), Dimitris Lagoudas (Texas A&M University)
Problems with interaction between manufacturing and failure Prof A Poursartip (UBC, Canada)
A study on room and elevated temperature mode-I fracture toughness of a hybrid interface using double cantilever beam tests, distributed strain sensing with fiber optics and finite element analysis
Industry needs for tools Dr M Jevons (Ferchau, Germany)
3222-2 IS IT POSSIBLE TO ELIMINATE MICRO-SCALE STRESS CONCENTRATIONS IN COMPOSITES BY NANO ENGINEERING WITH CNTS? Valentin Romanov (KU Leuven), Stepan Lomov (KU Leuven), Ignaas Verpoest (KU Leuven), Larissa Gorbatikh (KU Leuven)
Needs for design tools Dr M Stojkovic (NCC,UK)
A spatial distribution of CNTs in fiber-reinforced composites at the micro-scale is investigated to suppress stress concentrations without affecting stresses in the rest of the matrix.
Limitations of commercial software Ms S Miot (ssanalysis, UK)
15:20
COFFEE BREAK
15:40
3422 Workshop on Failure of composites: current status and future directions 2 Which Science works and which does not
3222-3 EFFECT OF FUNCTIONALIZATION OF GRAPHENE ON THERMAL CONDUCTIVITIES OF GRAPHENE/EPOXY COMPOSITES Xi Shen (The Hong Kong University of Science and Technology), Zhenyu Wang (The Hong Kong University of Science and Technology), Ying Wu (The Hong Kong University of Science and Technology), Xiuyi Lin (The Hong Kong University of Science and Technology), Xu Liu (The Hong Kong University of Science and Technology), Xinying Sun (The Hong Kong University of Science and Technology), Jang-Kyo Kim (The Hong Kong University of Science and Technology)
Unresolved issues with prediction of damage/delamination Prof M Wisnom (University of Bristol, UK) Current status and future research in micro mechanics Prof S Li (University of Nottingham, UK) Future directions in 3D composites Prof S Lomov (K.U. Leuven, Belgium)
The effect of functionalization on thermal conductivities of graphene embedded in epoxy and its composites is studied using molecular dynamics simulations. 3222-4 MECHANICAL PROPERTIES AND MODELING OF DISCONTINUOUS CARBON FIBER REINFORCED THERMOPLASTICS Yi Wan (the University of Tokyo), Toshiro Ohori (the University of Tokyo), Jun Takahashi (the University of Tokyo)
16:20
3322 Workshop on Failure of composites: current status and future directions 1 Organised by: Dr A S Kaddour (QinetiQ*, UK) Prof M J Hinton (HVM Catapult**, UK) Prof P Smith (The University of Surrey, UK) Prof S Li (Nottingham University, UK) Failure of composites is perhaps the biggest single topic towards which the composites community worldwide has been engaged in extensive research initiatives and activities. Arguably, the most notable top level activity is that carried out under the World-Wide Failure Exercises (WWFE), spanning more than 20 years. But, have we reached the endgame, yet? A composite structure could be a single fibre embedded in a matrix, a unit cell, 3D composite, a coupon with hole, a panel with ribs, a vessel, a wing, a blade, a fuselage, an aircraft, a spacecraft etc… The workshop will debate how much more work is needed in order to close (or narrow) any gap between academics/theoreticians and industrial designers/end users for designing a composite structure. The workshop will address missing links in validated design capabilities employed for reliably predicting failure evolution and ultimate strength, all the way up to the structural scale. In order to address the above, this work shop will provide a keynote addressing where we are on failure of composites. This is followed by a series of short presentations, given by invited speakers giving their views on future directions in their own areas they are actively leading. Finally, an open discussion and concluding remarks will be made.
14:00
3322-1 FAILURE OF COMPOSITE: STATUS AND FUTURE DIRECTION Mike J. Hinton (High Value Manufacturing Catapult), Sam Kaddour (QinetiQ)
Testing and Validation Future research structural analysis of composites Prof A Mouritz (RMIT, Australia) Future research in structural testing Prof F Paris (Seville university, Spain)
Suitability of Mori-Tanaka model on two CFRTPs were certified. Results show dissimilarities in different materials, the reason was considered to be the residual deformation of fiber structures. 14:00
Industry needs: Today and over the coming 10 years
16:35
Final remarks - Key actions arising
16:50
INDUSTRY SESSION - JEC GROUP
16:50
Overview and dynamism of the worldwide composites market Daniel Ageda (Secretary-General - JEC Group)
Posters and mini-orals programme The poster presentations at the ICCM20 are fully integrated in the scientific programme and consists of both a poster and a mini-oral presentation.
Mini-oral presentation schedule Tuesday 21 July Stage 1 9:30 Mini Oral Session I P101-1 STATISTICAL AND NUMERICAL ANLYSIS OF WEAR TOOL GEOMETRY IN DRILLING CFRP Norberto Feito (Universidad Carlos III de Madrid), Ana Sánchez Muñoz (Universidad Carlos III de Madrid), Jorge Lopez Puente (Universidad Carlos III de Madrid), Maria Henar Miguelez Garrido (Universidad Carlos III de Madrid)
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
P102-1 RECYCLING THE FIBER REINFORCED POLYMER COMPOSITES: OPTIMUM DECOMPOSITION CONDITIONS AND FIBER FAILURE MECHANISM Jian Shi (Akita prefectural university), Limin Bao (Shinshu University)
P103-1 INTERFACE FEATURES OF THE C/C COMPOSITE DURING ITS FORMING PROCESS WITH A COAL-TAR-PITCH AS THE PRECURSOR OF THE CARBON MATRIX Li Tong-Qi (Aerospace Reasearch Institute of Materials & Processing Technology), Feng Zhi-Hai (Aerospace Reasearch Institute of Materials & Processing Technology), Jiao Xing-Jan (Aerospace Reasearch Institute of Materials & Processing Technology), Zhang Zhong-Wei (Aerospace Reasearch Institute of Materials & Processing Technology), Feng Xiang (Aerospace Reasearch Institute of Materials & Processing Technology)
P104-1 HEAT TREATMENT RESPONSES OF PARTICULATE TIC REINFORCED TOOL STEEL COMPOSITES S. H. Kim (GIFT-POSTECH), D. W. Suh (GIFT-POSTECH)
P105-1 MODIFICATION OF EPOXY RESIN AND ITS INFLUENCE ON TENSILE PROPERTIES OF VISCOSE FABRIC COMPOSITES Rathish Rajan (Technology Centre Ketek Ltd), Mirva Rahkonen (Technology Centre Ketek Ltd), Mikael Skrifvars (University of Boras), Egidija Rainosalo (Technology Centre Ketek Ltd)
A recycling system was developed for the treatment of An experimental and statistical analysis has been carried FRP. In this research, FRP was efficiently depolymerized out in woven CFRPs drilling to study the influence of and reinforced fiber was separated from resin by superwear in delamination. A numerical model was also devel- heated stream. oped to predict surface damage.
Heat treatment responses of a particulate TiC reinforced tool steel matrix composite, which is fabricated by pressure infiltration casting, have been investigated.
Modification of the epoxy resin with silane coupling agent and assessing the influence of resin modification on the properties of viscose fabric reinforced composite.
I have uploaded my full paper. We will attend the conference. For the strict time set by our institute, we have no enough time to joint other activities. P101-2 THE EFFECT OF POST-WELDING COOLING RATE ON THE STRENGTH OF TCW JOINTS Zhi Bin Tan (University of Sydney), Liyong Tong (University of Sydney), Luke Djukic (Cooperative Research Centre for Advanced Composite Structures), Rowan Paton (Cooperative Research Centre for Advanced Composite Structures) TCW technology allows two carbon-epoxy components, manufactured with thermoplastic surfaces to be welded together. This study focuses on the effect of the cooling rate on the strength of the joint. P101-3 EVALUATION OF SKIN-CORE EFFECTS IN THICK CFRTP LAMINATES BY EMBEDDED OPTICAL FIBER SENSORS AND MECHANICAL TESTS Takuhei Tsukada (The University of Tokyo), Kentarou Iwanaga (The University of Tokyo), Shu Minakuchi (The University of Tokyo), Nobuo Takeda (The University of Tokyo)
P102-2 KINETIC STUDY OF THE HYDROLYSIS OF AN EPOXY RESIN IN HIGH TEMPERATURE AND HIGH PRESSURE WATER Gidéon Simenou (Institut de recherche technologique Jules Verne), Eric Le Gal La Salle (l’Institut Catholique des Arts et Métiers de Nantes), Jean Luc Bailleul (Ecole Polytechnique de l’Université de Nantes), Jérôme Bellettre (Ecole Polytechnique de l’Université de Nantes)
The structure of the woven GFRP ring was modelled by using impregnated unidirectional threads and repeated unit cell. Mechanical and thermal properties (micro-, macro- and meso-scale) were calculated
22
The interfacial shear strength (IFSS) of carbon fibers/BMI composites were investigated by micro-droplet test and the correlation of the fiber-matrix solubility parameter with interfacial mechanical p
This paper presents the findings of an investigation into the kinetic of the hydrolysis of carbon fiber epoxy composites, using high temperature and high pressure water. P102-3 INVESTIGATION OF TEXTILE DEFORMATION IN P103-3 EFFECT OF REINFORCEMENT FIBER CROSS LIQUID COMPOSITE MOLDING PROCESS SECTION GEOMETRY ON INTERFACIAL DEBONDING Dong Gi Seong (Korea Institute of Materials Science) BEHAVIOR OF COMPOSITES Tatsuya Yamasaki (Kyushu University), Nobuhide Uda Several types of fiber preform deformation in liquid (Kyushu University), Kousei Ono (Kyushu University), composite molding were observed and the related forces Hiroto Nagai (Kyushu University), Yuichi Hirakawa are measured in order to investigate the mechanism of (Kyushu University), Tadashi Nagayasu (Kyushu the deformations University)
This study demonstrated that the residual strain/stress distribution in thick CFRTP laminates due to skin-core effects can be evaluated by embedded optical fiber sensors and tensile tests. P101-4 ASSESSMENT OF RESIDUAL STRESSES IN THICK-WALLED GFRP SLIDING BEARING AFTER WINDING AND CURING Alexander Bezmelnitsyn (South Ural State University), Sergei Sapozhnikov (South Ural State University)
P103-2 EFFECT OF FIBER–POLYMER SOLUBILITY ON INTERFACIAL MECHANICAL PROPERTIES OF CARBON FIBER- REINFORCED BMI COMPOSITES Shi fenghui (AVIC composite Co.ltd), Li Jia (AVIC composite Co.ltd), Zhang baoyan (AVIC composite Co.ltd)
P102-4 DIELECTRIC CURE MONITORING OF A FAST CURING RESIN SYSTEM Ffion A Martin (University of Nottingham), Anastasia F Koutsomitopoulou (University of Bristol), Ivana K Partridge (University of Bristol), Alex A Skordos (Cranfield University)
We found that interfacial debonding process of composite with irregularly-shaped reinforcement is unique. This unique debonding behavior may affect the increase of interfacial properties. P103-4 STUDY OF THE INTERPHASE IN EPOXY/BASALT FIBRE COMPOSITES BY DYNAMIC MECHANICAL ANALYSIS Joana Ibarretxe (LEARTIKER), Ricardo Hernandez (LEARTIKER), Alex Arrillaga (LEARTIKER), Faustino Mujika (University of the Basque Country)
Study of a new three part epoxy system for use in short cycle time RTM processes. Following the establishment of a cure kinetics model, the potential of dielectric cure monitoring mould was explored.
The viscoelastic properties of modified unidirectional epoxy basalt fibre composites were investigated. The sensitivity and applicability of cooperativity to the interphase analysis was proved.
P104-2 EFFECTS OF SHORT ALUMINA FIBER REINFORCEMENT ON MACHINABILITY OF ALUMINUM ALLOY Kazunori Asano (Kinki University) Short alumina fiber-reinforced aluminum alloy composites were fabricated by squeeze casting, and the effects of the fiber reinforcement on the turning machinability of the alloy were investigated.
P104-3 THE CARBON FOAM WITH SKELETON STRUCTURE IN COMPOSITE MATERIALS Jerzy Myalski (Silesian University of Technology), Andrzej Posmyk (Silesian University of Technology), Bartosz Hekner (Silesian University of Technology) The manufacturing process and tribological investigations of composites reinforced by different types of foams (GC, Al2O3 and Al2O3+GC) are presented.
P104-4 THE EFFECTS OF MASTER SINTERING CURVE ON THE MICROSTRUCTURAL EVOLUTION AND MAGNETIC PROPERTIES OF NICUZN FERRITES Chenxin Ouyang (Harbin Institute of Technology), Shumin Xiao (Harbin Institute of Technology ), Jianhua Zhu (Shenzhen Zhenhuafu Electronics Co.), Peng Zhou (Harbin Institute of Technology), Hai Wang (Shenzhen Zhenhuafu Electronics Co.) This work reports our recent work on the fabrication of NiCuZn ferrites, with the particular interests on how the pre-sintering affect the microstructural evolution and magnetic properties.
P105-2 OPTIMIZING THE MANUFACTURE OF BIOBASED COMPOSITES AND LOW TEMPERATURE CURE POWDER COATING Karnika De Silva (University of Auckland), Mark Taylor (University of Auckland), Debes Bhattacharyya (University of Auckland), Sanjeev Rao (University of Auckland), Dawn Smith (Scion ), Clemence Dranebois (Scion ) Variability in the surface conductivity, moisture level, porosity & heat distortion at high temp. employed to cure powders coatings on (MDF) boards have led to poor surface finishes. P105-3 TENSILE CHARACTERISTICS OF JUTE ROPE PLAIN FABRIC REINFORCED POLYLACTIC ACID COMPOSITES Jieng-Chiang Chen (Vanung University), Chang-Mou Wu (National Taiwan University of Science and Technology), Jia-Sheng Li (Vanung University) Manufacturing and tensile properties of jute plain fabric reinforced polylactic acid composites were investigated in current study. The composites have good tensile strength and energy absorption.
P105-4 AN ANALYTICAL MODEL FOR PREDICTING THE TENSION MODULUS AND POISSON’S RATIO OF SATIN WEAVE COMPOSITES Tianya Bian (Beijing University of Aeronautics and Astronautics), Zhidong Guan (Beijing University of Aeronautics and Astronautics), Junwu Mu (Beijing University of Aeronautics and Astronautics), Zhaojie Ji (Beijing University of Aeronautics and Astronautics), Geng Han (Beijing University of Aeronautics and Astronautics) The article established an analytical model to make an accurate prediction for the tension modulus and Poisson’s ratio based on energy method and improving rule of mixtures formulations.
Posters and mini-orals programme// Tuesday 21 July Stage 1 9:30 Mini Oral Session I P101-5 ACCEPTANCE TESTING OF TUNGSTEN-CFRP LAMINATE INTERFACES FOR SATELLITE ENCLOSURES Mikko Kanerva (Aalto University), Jarno Jokinen (Aalto University), Paulo Antunes (University of Aveiro), Markus Wallin (Aalto University), Timo Brander (Aalto University), Olli Saarela (Aalto University)
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
P102-5 A PRELIMINARY EVALUATION OF THE HIGH INJECTION PRESSURE RESIN TRANSFER MOULDING PROCESS Masoud Bodaghi (Engineering Design and Advanced Manufacturing-MIT Portugal Programme-Faculty of Engineering-University of Porto-Porto), Nuno Correia (Instituto de Engenharia Mecânica e Gestão IndustrialCampus da FEUP)
P103-5 FRIABILITY, THERMAL STABILITY, AND EFFECT OF HYGROTHERMAL AGING ON THE MECHANICAL PROPERTIES OF LIGNIN- AND WOOD-REINFORCED PHENOLIC FOAMS Juan Carlos Domínguez (Complutense University of Madrid), María Virginia Alonso (Complutense University of Madrid), Mercedes Oliet (Complutense University of Madrid), Belén del Saz-Orozco (Complutense University of Madrid), Francisco Rodriguez (Complutense University of Madrid)
P104-5 IMPROVEMENT OF PARTICLE-REINFORCED COMPOSITES BY METAL FORMING AIDED BY CYCLIC SHEAR STRESS Jerzy Myalski (Silesian University of Technology), Franciszek Grosman (Silesian University of Technology), Bartosz Hekner (Silesian Univesity of Technology), Marek Tkocz (Silesian Universit of Technology)
P105-5 NON-CONVENTIONAL GLASS FIBER NCF COMPOSITES WITH THERMOSET AND THERMOPLASTIC MATRICES Thierry Lorriot (Institute of Mechanics and Engineering (I2M)), Jalal El Yagoubi (Institute of Mechanics and Engineering (I2M)), Julie Fourel (Chomarat Textiles Industries), Franck Tison (Plateforme CANOE)
The paper presents a method for altering the microstructure of cast composites reinforced with particles, which consists in compression aided by shear stress caused by transverse motion of a punch.
We propose in this paper a preliminary experimental study on the mechanical behavior of glass NCF composites with shallow angled plies. We considered a thermoset matrix and a thermoplastic one.
P104-6 TECHNOLOGICAL ASPECTS OF OBTAINING ALMMC - THE MODIFICATION OF ALSI MATRIX ALLOY Maciej Dyzia (Silesian University of Technology), Anna J. Dolata (Silesian University of Technology)
P105-6 APPLICATION OF HIGH IMPREGNATION CHARACTERIZATION OF A CYCLIC BUTYLENE TEREPHTHALATE OLIGOMER RESIN FOR ELECTRICALLY AND THERMALLY CONDUCTIVE COMPOSITES SIMULTANEOUSLY REINFORCED WITH CONTINUOUS FIBER AND NANOCARBON FILLERS Seong Yun Kim (Korea Institute of Sicence and Technology (KIST)), Ye Ji Noh (Korea Institute of Sicence and Technology (KIST))
This is a study about experimental 3-point bend testing of W-CFRP laminate specimens and FE simulations of the interfacial failure propagation during these tests. Void size distribution in composites produced by high injection resin transfer moulding was addressed.For no gap the HIPRTM delivers the composite part with the lowest frequency of void size of c.4 %.
P101-6 ANALYSIS AND EVALUATION OF MECHANICAL PROPERTIES USING AUTOCLAVE MOLDING METHOD Toshikazu Uchida (Kyoto Institute of Technology), Junpei Ochiai (UCHIDA Co.), Defang ZHAO (Donghua University ), Yuqiu Yang (Donghua University ), Tadashi Uozumi (Gifu University), Hiroyuki Hamada (Kyoto Institute of Technology), Koji Kuroda (Kyoto Institute of Technology), Atsushi Endo (Kyoto Institute of Technology), Akihiko Goto (Osaka Sangyo University) This paper discusses how differences in the hand layup work process and workers’ skill level influence the mechanical performance of molded products by process analysis and dynamic characteristics.
P102-6 CARBON FIBER/PHTHALONITIRLE RESIN COMPOSITES WITH HIGH TEMPERATURE RESISTANT AND EXCELLENT RTM PROCESSABILITY Bao-Gang Sun (Aerospace Research Institute of Materials & Processing Technology), Han-Qiao Shi (Aerospace Research Institute of Materials & Processing Technology), Zhi-Yong Yang (Aerospace Research Institute of Materials & Processing Technology), Qian Liu (Aerospace Research Institute of Materials & Processing Technology), Yi Zhang (Aerospace Research Institute of Materials & Processing Technology)
Carbon fiber/phthalonitrile resin composites were prepared by RTM process. Their RTM processability, high-temperature resistant, mechanical properties and micromorphology were studied. P101-7 DETERMINATION OF ISOTROPY OF THE C/PPS P102-7 PROPERTIES OF ULTRA-CRYOGENIC EPOXY SAMPLES MANUFACTURED FROM PELLETS RESIN MATRIX COMPOSITES BY RTM PROCESS Zdenek Padovec (Czech Technical University in PragueHan-Qiao Shi (Aerospace Research Institute of Materials Faculty of Mechanical Engineering), Hynek Chlup (Czech & Processing Technology), Bao-Gang Sun (Aerospace Technical University in Prague-Faculty of Mechanical Research Institute of Materials & Processing Technology), Engineering), Radek Sedlacek (Czech Technical Qian Liu (Aerospace Research Institute of Materials University in Prague-Faculty of Mechanical Engineering), & Processing Technology), Zhi-Yong Yang (Aerospace Michal Kral (Czech Technical University in Prague-Faculty Research Institute of Materials & Processing Technology), of Mechanical Engineering), Milan Ruzicka (Czech Yi Zhang (Aerospace Research Institute of Materials & Technical University in Prague-Faculty of Mechanical Processing Technology) Engineering), Pavel Ruzicka (Czech Technical University in Prague-Faculty of Mechanical Engineering) Epoxy composites with with excellent cryogenic mechanical properties and RTM processability were develPresented work deals with isotropy determination of oped.The effects of temperature and cryogenic-cycles on flat plate manufactured from randomly oriented C/PPS mechanical properties were revealed. pellets with image processing methods, analytical and numerical calculation and experiment. P101-8 »MULTI-MATERIAL-HEAD« ONE TOOL FOR 3 P102-8 NUMERICAL SIMULATION OF TRI-BODY TECHNOLOGIES: LASER-ASSISTED THERMOPLASTCOMPOSITES BOAT BY VARTM INTEGRAL PROCESS TAPE PLACEMENT, THERMOSET-PREPREGXiao Tang (Harbin Engineering University), Chai Jun PLACEMENT AND DRY-FIBER-PLACEMENT (Harbin Engineering University), Lili Tong (Harbin Michael Emonts (Fraunhofer Institute for Production Engineering University) Technology IPT) With the development of science and technology, variety The all-in-one »Multi Material Head« is a flexible fibof composite manufacturing processes emerged as the er-placement system and allows to process thermoplas- times required. The vacuum assisted resin transfer moldtic tape, thermoset prepreg and spread dry-fiber rovings ing (VARTM) process is now used exten covered with a binder within one tool
Study of the influence of lignin nanoparticle and wood flour reinforcements on the final properties of a phenolic foam and the effect of hygrothermal aging on their compressive mechanical properties P103-6 RIGID AROMATIC HETEROCYCLIC POLYMER FOAMS FOR HIGH TEMPERATURE APPLICATIONS Ming Liu (Nanyang Technological University), Liying Zhang (Nanyang Technological University), Xiao Hu (Nanyang Technological Univeristy) The work present the development and characterization of rigid closed-cell foam based on an aromatic heterocyclic thermoset resins for high temperature applications.
In the technological process based on the stir-casting appropriate preparation of matrix alloy is decisive importance for the permanent connection between the ceramic particles and the liquid matrix
Applications of high impregnation characterization of the polymerizable, low-viscosity CBT oligomer resin to continuous carbon fiber fabric and carbon nanotube mat composites are investigated
P103-7 MECHANICAL PROPERTIES OF POLYURETHANE CELLULAR FOAM FROM PALM CANOPY POWDER Anin Memon (Rajamangala University of technology thunyabury), Sirichai Torsakul (Rajamangala University of technology thunyabury), Varunee Premanond (King Mongkut’s University of Technology Thonburi), Anucha Watanapa (King Mongkut’s University of Technology Thonbuuri), Amnoiy Ruengwaree (Rajamangala University of Technology Thunyaburi) Polyurethane cellular foam mixed palm canopy powder were fabricated with sized 350 mm x 350 mm x 100 mm (W x L x H), and were used as heat insulator. Palm canopy powder of three various sizes: 100 mes
P103-8 A BIOBASED AND MOISTURE-STABLE HONEYCOMB STRUCTURE OF HIGH SHEAR STIFFNESS AND LOW DENSITY Lars Berglund (KTH Royal Inst of Technology), Qiliang Fu (KTH Royal Inst of Technology) In the current study, we have used sodium chlorite and sodium hydroxide as extraction solutions, to remove lignin and hemicelluloses from the Balsa (Ochroma Lagopus) wood tissues.
P104-7 THE INFLUENCE OF MODIFIER ELEMENTS ON THE MICROSTRUCTURE OF ALSI ALLOY DESTINED FOR MATRIX OF COMPOSITES WITH SIC AND C PARTICLES Anna Janina Dolata (Silesian University of Technology), Maciej Dyzia (Silesian University of Technology) In presented work the influence of modifier elements such as Ti, B, Sr and Mg on microstructure of AlSi7Mg alloy designed as matrix of composites reinforced by SiC and Cg particles were presented.
P105-7 PAPERMAKING PILOT TRIALS WITH A NEW SILICA COATED PCC FILLER Ana Lourenço (University of Coimbra), Rogério Simões (University of Beira Interior), Ana P. Costa (University of Beira Interior), José Gamelas (University of Coimbra), Paulo Ferreira (University of Coimbra) The present work enabled to confirm, at pilot scale, the results obtained at laboratorial scale regarding the potential of silica-coated PCC filler to be used in papermaking.
P105-8 INFLUENCE OF GLASS FILLERS ON PROPERTIES OF SHORT CARBON FIBER REINFORCED THERMOPLASTIC COMPOSITES Izabella Rashkovan (UVICOM Co.Ltd), Ol’ga Kulachinskaya (Polyplastic Co.), Mark Kazakov (UVICOM Co.Ltd) Improving of physical-mechanical properties of 15% short carbon fiber reinforced polyamide-6 as a result of hybridization with glass fillers have been studied.
23
//Posters and mini-orals programme Tuesday 21 July Stage 1
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
P101-9 ONLINE PROCESS MONITORING AND CONTROL BY DIELECTRIC AND PRESSURE SENSORS FOR A COMPOSITE MAIN SPAR FOR WIND TURBINE BLADES Arne Breede (Faserinstitut Bremen e.V.), Maryam Kahali Moghaddam (Institut für Mikrosensoren--aktoren und -systeme), Christian Brauner (Faserinstitut Bremen e.V.), Walter Lang (Institut für Mikrosensoren--aktoren und -systeme), Axel S. Herrmann (Universität Bremen)
P102-9 ANALYSIS OF MECHANICAL PROPERTY IN VARTM-MANUFACTURED CARBON FIBRE REINFORCED COMPOSITE MATERIALS Yasunari Kuratani (Kyoto Institute of Technology), Kentaro Hase (KADO Corporation), Takahiro Hosomi (KADO Corporation), Tomoe Kawazu (KADO Corporation), Tadashi Uozumi (Gifu University), Akihiko Goto (Osaka Sangyo University)
P103-9 PROCESSING, MICROSTRUCTURE AND PROPERTIES OF CARBON NANOTUBES REINFORCED MG MATRIX COMPOSITES Xiaojun Wang (Harbin Institute of Technology), Xiaoshi Hu (Harbin Institute of Technology), Kun Wu (Harbin Institute of Technology), Yanqiu Wang (Harbin Engineering University), Xutang Zhang (Harbin Institute of Technology)
P104-9 EFFECTIVE THERMAL CONDUCTIVITY OF ALUMINUM MATRIX COMPOSITES WITH CONSIDERING INTERFACIAL THERMAL RESISTANCE Kenjiro Sugio (Institute of Engineering-Hiroshima Univ.), Rio Yamada (Institute of Engineering-Hiroshima Univ.), Gen Sasaki (Institute of Engineering-Hiroshima Univ.)
P105-9 EVALUATION OF FIBER MATRIX INTERFACIAL STRENGTH FOR CNT GRAFTED CF/PA6 AT HIGH TEMPERATURE Kazuto Tanaka (Doshisha University), Genta Maeda (Doshisha University), Yusuke Morita (Doshisha University), Tsutao Katayama (Doshisha University)
This study presents a monitoring method to determine viscosity and permeability for a composite main spar infusion process. Sensor data is fed into a 2D flow simulation to derive real process values. P101-10 INFLUENCE OF PREHEATING CONDITIONS ON THE DEGRADATION OF CARBON FIBER REINFORCED POLYPROPYLENE Hao Piao (The University of Tokyo), Wataru Nagatsuka (The University of Tokyo), Hooseok Lee (The University of Tokyo), Isamu Ohsawa (The University of Tokyo), Jun Takahashi (The University of Tokyo)
VaRTM requires a preform to be manufactured before molding however, the majority works are manufactured by hand. So we focus on the accuracy of these preforms lies in the ability of the performers and P102-10 EFFECT OF SURFACE COATING ON THE CHARACTERIZATION OF THE PROCESS DYNAMICAL BEHAVIOUR DURING MOLD FILLING IN LIQUID RESIN INFUSION Victor García (University CEU Cardenal Herrera), Enrique Cortes (Aerox Advanced Polymers), Luis Domenech (University CEU Cardenal Herrera), Fernando Sanchez (University CEU Cardenal Herrera), Francisco Chinesta (Ecole Central de Nantes)
We developed new simulation code which can calculate the effective thermal conductivity of composites with considering the interfacial thermal resistance.
Carbon nanotubes were grafted on the surface of carbon fibers. The influence of high temperature on the interfacial properties of CF/PA6 was revealed by single fiber pull-out tests.
P104-10 MECHANICAL HYSTERESIS BEHAVIOR OF FIBER-REINFORCED CERAMIC-MATRIX COMPOSITES AT ROOM AND ELEVATED TEMPERATURES Longbiao Li (Nanjing University of Aeronautics and Astronautics)
P105-10 MECHANICAL PROPERTIES OF CNT/CARBON FIBER/EPOXY HIERARCHICAL COMPOSITES PREPARED USING ELECTROPHORETICAL DEPOSITION Shinn-Shyong Tzeng (Tatung University), Ding-Hwa Cherng (Tatung University)
9:30 Mini Oral Session I
This study investigate the Influence of heat aging on mechanical properties of MAPP. Regardless of both additional amount of maleic acid and heating time, the MAPP becomes brittler by heat exposure.
P101-11 PREPARATION AND CHARACTERIZATION OF THE PVDF/LDPE THERMOPLASTIC COMPOSITE Seung Goo Lee (Chungnam National University), Jong Sung Won (Chungnam National University) In this study, polyvinylidene fluoride(PVDF) fiber reinforced low density polyethylene(LDPE) composites were manufactured by a hot pressing method using “conjugate spun fibers”.
A mixed numerical/experimental technique based on artificial vision is used for estimating the induced effect of the surface coating curing in the laminate impregnation during filling.
P103-10 STRONG AND DUCTILE NANOLAMINATED COMPOSITES FABRICATED BY FLAKE POWDER METALLURGY Zhiqiang Li (Shanghai Jiao Tong University), Genlian Fan (Shanghai Jiao Tong University), Zhanqiu Tan (Shanghai Jiao Tong University), Zhen Qin (Shanghai Jiao Tong University), Di Zhang (Shanghai Jiao Tong University)
CNT/carbon fiber fabric/epoxy three-phase hierarchical composites were fabricated using electrophoretic deposition and the mechanical properties of the three-phase composites were investigated.
A bio-inspired architecture design and flake powder metallurgy technique route was explored to coordinate the strength-ductility dilemma for CNT/Al composites
P102-11 THROUGH THICKNESS COMPACTION RESPONSE OF 3D WOVEN REINFORCEMENTS Rehan Umer (Khalifa University), Hussam Alhussein (Khalifa University), Sanjeev Rao (Khalifa University), Wesley Cantwell (Khalifa University)
P103-11 ENHANCED LOAD TRANSFER IN CARBON NANOTUBES-REINFORCED ALUMINUM Jong Gil Park (Institute for Basic Science), Dong Hoon Keum (Sungkyunkwan Univ.), Young Hee Lee (Institute for Basic Science)
This paper presents compaction characterization of 3D fabrics for LCM process. The data presented paves the ground for robust LCM processes in both simulation and real life.
We report the fabrication method of CNTs-reinforced Al by castable process. The yield strength of Al-CNT composite is improved by 60%. The strengthening can be explained from load transfer mechanism.
P104-11 SHEAR AND BENDING PROPERTIES OF CERAMIC FIBER REINFORCED SILICA AEROGEL MATRIX COMPOSITES Shuangqi Lv (Beihang University), Duoqi Shi (Beihang University), Xiaoguang Yang (Beihang University), Jian Feng (National University of Defense Technology), Yantao Sun (Beihang University)
Shear and bending properties of fiber reinforced aerogel composites were investigated experimentally to obtain the anisotropic mechanical behaviors and different failure modes. P101-12 ATMOSPHERIC PRESSURE PLASMA SURFACE P102-12 IN-PLANE AND THROUGH-THICKNESS P103-12 DEFINITION AND MANUFACTURING OF P104-12 CATALYTIC PROPERTY OF ZIRCONIUM TREATMENT OF THERMOPLASTIC COMPOSITES FOR PERMEABILITY CHARACTERIZATION OF 3D WOVEN CARBON FIBER REINFORCED ALUMINUM FOR DIBORIDE-SILICON CARBIDE CERAMIC COMPOSITES BONDED JOINTS REINFORCEMENTS EMBEDDED ELECTRONIC PACKAGINGS Qingxuan Zeng (Harbin Institute of Technology), Hua Jin Clara Palleiro Palmou (AIMEN Technology Centre), Hussam Alhussein (Khalifa University), Rehan Umer Christophe Perron (Univ. Bordeaux), Corinne ARVIEU (Univ. (Harbin Institute of Technology), Songhe Meng (Harbin Sergey Stepanov (Fraunhofer Institute for Manufacturing (Khalifa University), Sanjeev Rao (Khalifa University), Bordeaux), Eric LACOSTE (Univ. Bordeaux) Institute of Technology), Jiahong Niu (Harbin Institute of Technology and Advanced Materials IFAM), Elena Wesley Cantwell (Khalifa University ) Technology), Fajun Yi (Harbin Institute of Technology) Rodriguez-Senín (AIMEN Technology Centre), Ralph Pitch based carbon fibres reinforced aluminium is invesWilken (Fraunhofer Institute for Manufacturing Permeability of three different 3D woven carbon fiber tigated for heat sink performance. Numerical simulations Technology and Advanced Materials IFAM), Jörg Ihde reinforcements were studied. For all reinforcements, were led to evaluate its viability and processing routes (Fraunhofer Institute for Manufacturing Technology and unsaturated radial in-plane, and saturated through thick- were reviewed. Advanced Materials IFAM) ness were obtained at different Vfs Polypropylene matrix composites were treated by atmospheric pressure plasma, in order to improve their adhesive properties. The influence of the most significant operational parameters were studied
24
P105-11 EFFECT OF NANO ZNO ON THE PROPERTIES OF PP/ZNO COMPOSITE YARNS Samiha Gawish (National Reserach center), Amira Ramadan (National Reserach center) SUMMARY:The objective of this study is the modification of PP with nano ZnO at a loading of 1,2 and 3% and determination of the influence of the additive on the thermal and mechanical properties
P105-12 PREPARATION AND UV-AGEING RESISTANCE PROPERTIES OF POLY(P-PHENYLENE BENZOBISOXAZOLE)/NANO-TIO2 NANOCOMPOSITE FIBERS Byung Gil Min (Kumoh National Institute of Technology), Qingwei Wang (Kumoh National Institute of Technology), Kwan Han Yoon (Kumoh National Institute of Technology), Sang Cheol Lee (Kumoh National Institute of Technology) Nanocomposite fibers of poly(p-phenylene benzobisoxazole) and nano-titania were prepared through dry-jet wet spinning for improving UV-ageing resistance.
Posters and mini-orals programme// Tuesday 21 July Stage 1
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
P101-13 INTRINSIC JOINING OF INCOMPATIBLE FIBER-REINFORCED PLASTICS BY PHOTONICS Michael Emonts (AZL of RWTH Aachen University), Kai Fischer (AZL of RWTH Aachen University), Stefan Schmitt (AZL of RWTH Aachen University), Richard Schares (AZL of RWTH Aachen University)
P102-13 RESIDUAL STRESS MEASUREMENT OF CFRP BY X-RAY DIFFRACTION Taisei Doi (Advanced Course Student of Kobe City College of Technology), Masayuki Nishida (Kobe City College of Technology), Junichi Ozaki (Kobe City College of Technology)
P104-13 OXIDATION BEHAVIOR OF CARBON/CARBON COMPOSITES WITH A NOVEL REUSABLE SIC–SIO2 OXIDATION PROTECTION SYSTEM Xingjian Jiao (Aerospace Research Institute of Materials & Processing Technology), Tongqi Li (Aerospace Research Institute of Materials & Processing Technology)
P105-13 GRAPHITE NANOSHEET 3-D NETWORKS FOR POLYMER COMPOSITES CAPABLE OF ENHANCED HEAT TRANSPORT Sang-Soo Lee (Korea Institute of Science and Technology), Sung Gook Jin (Korea Institute of Science and Technology)
The process chain to combine thermoset and thermoplastic FRP has been proven by the use of a pulsed laser with continuous carbon fiber-reinforced epoxies and a short glass fiber-reinforced PA6.
We try the next step to measure the residual stress in carbon fiber by x-ray stress measurement.The residual stress of CFRP have the possibility to measure by the x-ray stress measurement.
P103-13 IN-SITU FABRICATION AND REFINEMENT OF AL-MATRIX COMPOSITES REINFORCED JOINTLY BY TIB2 AND MG2SI PARTICLES Shusen Wu (Huazhong University of Science and Technology), Qi Gao (Huazhong University of Science and Technology), Xuecheng Duan (Huazhong University of Science and Technology), Ping An (Huazhong University of Science and Technology), Shulin LÜ (Huazhong University of Science and Technology)
A low-cost SiC-borosilicate glass coating was prepared on C/C composites. The coating showed self-sealing performance and excellent anti-oxidation behavior in the temperature from 900 ℃ to 1500 ℃.
Construction of carbon-based three-dimensional networks is an effective strategy for practical applications including thermal management materials, and we have developed a novel method for that matter
P101-14 EVOLUTION BEHAVIOR OF TIB WHISKER DURING LASER WELDING IN-SITU SYNTHESIZED TIB/ TI COMPOSITES Mao Jianwei (State Key Laboratory of Metal Matrix Composites-Shanghai Jiaotong University), Chen Liangyu (State Key Laboratory of Metal Matrix CompositesShanghai JiaoTong University), Wang Liqiang (State Key Laboratory of Metal Matrix Composites-Shanghai JiaoTong University), Lu Weijie (State Key Laboratory of Metal Matrix Composites-Shanghai Jiaotong University)
P102-14 EXAMINATION OF THE CHEMICAL MECHANISMS DURING THERMAL TREATMENT OF CARBON FIBER PAN PRECURSORS Nino Haase (University of Augsburg), Robert Horny (University of Augsburg), Jonas Schmitz (University of Augsburg), Siegfried Horn (University of Augsburg), Klaus Ruhland (University of Augsburg)
P104-14 EVALUATION OF OXIDATION BEHAVIOR OF UHTC COMPOSITE MATERIALS Mamoru Yano (Tokyo Univercity of Science), Yuki Kubota (Tokyo Univercity of Science), Hiroki Tanaka (Tokyo Univercity of Science), Yasuo Kogo (Tokyo Univercity of Science), Ken Goto (Institute of Space and Astronautical Science)
P105-14 INVESTIGATING INTERFACIAL THERMAL CONDUCTANCE OF GRAPHENE/EPOXY NANOCOMOPOSITES Jia-Lin Tsai (National Chiao Tung University), Tai-Yuan Wang (National Chiao Tung University), Hsiu-Yu Lee (National Chiao Tung University)
9:30 Mini Oral Session I
In-situ titanium matrix (TMCs) is a promsing and advanced structural materials, and how to solve the critical technology problem of their weldability are necessary for their engineering applications. P101-15 FORM-ADAPTIVE GRIPPING SYSTEM FOR LIGHT-WEIGHT PRODUCTIONS Christian Brecher (Fraunhofer Institute for Production Technology IPT), Michael Emonts (Fraunhofer Institute for Production Technology IPT), Christian Kukla (Fraunhofer Institute for Production Technology IPT), Richard Schares (Fraunhofer Institute for Production Technology IPT) Form-adaptive and area-selective electrostatic gripping technology. Automated handling and draping of non-rigid, air-permeable, sensitive technical textiles (e.g. carbon, glass or aramid fibres).
P101-16 ASSESSEMENT OF DIFFERENT TECHNIQUES FOR ADDING THERMOPLASTIC MATRIXMATERIAL IN THE REINFORCEMENT STRUCTURES Joris Degrieck (Ghent University), Ruben Geerinck (Ghent university), Ives De Baere (Ghent university), Geert De Clercq (Ghent University), Jan Ivens (KU Leuven)
PAN-homopolymers (partially deuterated) and corresponding oligomers were synthesized and their thermal behaviours were examined to further understand the stabilization mechanisms during CF-production.
In-situ (TiB2+Mg2Si)/Al composites with higher particle volume fraction, about 15%, were fabricated successfully. Mechanical properties of the composites are improved. P103-14 MAGNESIUM ALLOY ELEKTRON21 REINFORCED WITH ALN: PROCESSING, MICROSTRUCTURE AND COMPRESSION CREEP RESPONSE Lydia Katsarou (Helmholtz-Zentrum Geesthacht), Maher Mounib (Université de Rouen), Williams Lefebvre (Université de Rouen), Hajo Dieringa (Helmholtz-Zentrum Geesthacht) Magnesium alloy Elektron21 reinforced with nano-AlN was examined by metallography, electron microscopy, hardness, compression creep and mechanical compression strength methods within EC-project ExoMet
Oxidation behavior of C/ZrB2-SiC-ZrC under dynamic heating condition at 1800°C was investigated. The composite showed better recession and oxidation resistance with the optimized composition.
P102-15 HIGH-TEMPERATURE CREEP BEHAVIOR OF ALUMINA/YAG/ZIRCONIA COMPOSITES Fredy A. HUAMAN-MAMANI (Universidad de Sevilla), Manuel JIMENEZ-MELENDO (Universidad de Sevilla)
P103-15 MICROSTRUCTURE AND PROPERTIES OF TIBCN–TC4 COMPOSITES PREPARED BY LASER MELTING Jiandong Hu (Jilin University)
P104-15 EXPERIMENTAL STUDY ON ULTRASONIC ASSISTED GRINDING OF C/SIC COMPOSITES Yucan Fu (Nanjing university of Aeronautics and Astronautics)
Study of the fabrication, microstructure and creep properties of a three-phase alumina-yttrium aluminum garnet-zirconia composite with the ternary eutectic composition.
TiBCN powder , possessing NaCl-type fcc structure , synthesized by boronizing of Ti , was firstly used as additives to make TiBCN–Ti–6Al–4V/TC4 base composites on TiC4by laser cladding. The TiBCN pow
Ultrasonic assisted grinding and conventional grinding tests of C/SiC composites were conducted. The machining quality, grinding force, grinding force ration and specific grinding energy were studied
P102-16 FUNCTIONAL UV COATING COMPOSITION FOR P103-16 DISCUSSION OF THE EVOLUTION OF MICRO STEEL COATING CRACKS BY CHARACTERIZATION AND MODELING Hye-Jn Yoo (POSCO) OF METAL MATRIX COMPOSITES REINFORCED BY METALLIC GLASS PARTICLES Modified urushiols were successfully synthesized and Kay André Weidenmann (Karlsruhe Institute of their properties of films were investigated. modified Technology), Klaudia Lichtenberg (Karlsruhe Institute urushiol films showed better inhibitory results on the of Technology), Katrin Schulz (Karlsruhe Institute of growth of bacteria than pristine film. Technology) Innovative metallic glass particle reinforced MMCs produced by gas pressure infiltration were numerically and experimentally investigated regarding dislocationbased deformation and crack evolution.
P104-16 GAMA RADIATION EFFECT ON THERMOGRAVIMETRIC PROPERTIES AND INFRARED SPECTROSCOPY OF SISAL FIBERS / POLYURETHANE DERIVED FROM CASTOR OIL COMPOSITES WITHOUT COUPLING AGENTS Marina Vasco (Technological Federal University of Paraná), Juliana Cortez (Technological Federal University of Paraná), Paulo Bittencourt (Technological Federal University of Paraná), Salvador Claro Neto (University of São Paulo), Elaine Azevedo (Technological Federal University of Paraná) Thermogravimetric and infrared spectroscopy were used to analyze composites of dispersed and woven sisal fibers and polyurethane derived from castor oil before and after gamma irradiation.
The functionalization of graphene on interfacial thermal conductance (ITC) of graphene/epoxy nanocomposites was investigated using non-equilibrium molecular dynamics (NEMD) simulation.
P105-15 BROADBAND DIELECTRIC SPECTRA AND MICROWAVE ABSORBING / SHIELDING EFFICIENCY OF DIELECTRIC-CONDUCTOR NANOCOMPOSITES Viktor Bovtun (Institute of Physics-Academy of Sciences of the Czech Republic), Alexandra Borisova (NTUU “Kiev Polytechnic Institute”), Martin Kempa (Institute of Physics-Academy of Sciences of the Czech Republic), Aleksander Machulyansky (NTUU “Kiev Polytechnic Institute”), Dmitry Nuzhnyy (Institute of Physics-Academy of Sciences of the Czech Republic), Maxim Savinov (Institute of Physics-Academy of Sciences of the Czech Republic), Jan Petzelt (Institute of Physics-Academy of Sciences of the Czech Republic), Yuriy Yakymenko (NTUU “Kiev Polytechnic Institute”) Microwave shielding and absorption efficiency of some polymer-based dielectric-conductor nanocomposites is simulated on the base of their experimentally studied broadband dielectric spectra. P105-16 ELECTRICAL AND MECHANICAL PROPERTIES OF CARBON AEROGELS / PHENOLIC RESIN FOR NANOCOMPOSITES Wei Jen Chen (National Tsing Hua University), Yi Luen Li (National Tsing Hua University), Chin-lung Chiang (Hung Kuang University ), Ming Chuen Yip (National Tsing Hua University), CHEN-CHI M. Ma (National Tsing Hua University), Ming Yuan Shen (China University of Science and Technology) In this study carbon aerogels and phenolic resin were used to prepare nano polymer resin. Polyethylene oxide (PEO) was used as the modifying agent for resin, to improve it mechanical properties.
25
//Posters and mini-orals programme Tuesday 21 July Stage 1 9:30 Mini Oral Session I P101-17 INVESTIGATION ON THE MECHANICAL ROBUSTNESS OF CFRP MOLDS Philipp Kammerhofer (Institute for Carbon Composites), Swen Zaremba (Institute for Carbon Composites), Klaus Drechsler (Institute for Carbon Composites) Wihtin this investigation the failure of composite edges due to a static load has been observed. Therefore a test has been developed that determines a quasi-static strength of edges.
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
Mini Oral Session I
P102-17 SELF PROPAGATING HIGH TEMPERATURE SYNTHESIS OF TIB2-AL2O3 AND CRB2- AL2O3 PREPARATION OF TIB2-AL2O3 AND CRB2- AL2O3 COMPOSITES WITH A BROAD RANGE OF PHASE COMPOSITION WAS CONDUCTED BY SELFPROPAGATING HIGH-TEMPERATURE SYNTHESIS (SHS). Danara Raimkhanova (Institute of Combustion Problems), Roza Abdulkarimova (Institute of Combustion Problems), Zulkhair Mansurov (Institute of Combustion Problems)
P103-17 A COMPOSITE BASED ON 7475 ALLOY REINFORCED WITH PARTICLES OF AL3TI Wojciech Szymański (Institute of Non-Ferrous Metals)
P104-17 THERMAL DEGRADATION PROPERTIES OF RHDPE/EVA/EGGSHELL POWDER COMPOSITES: EFFECTS OF FILLER LOADING AND PVC-MA COUPLING AGENT Nur Farahana Ramli (Universiti Malaysia Perlis (UniMAP)), Supri A. Ghani (Universiti Malaysia Perlis (UniMAP)), Teh Pei Leng (Universiti Malaysia Perlis (UniMAP))
P105-17 METAL NANOWIRES SELF-ASSEMBLY BY DIELECTROPHORETIC Ching-Chang Lin (National Chiao Tung University), WenHsien Sun (industrial technology Research Institute), Ya-Lin Lin (National Chiao Tung University), Fu-Hsiang Ko (National Chiao Tung University)
Beneficial effect of the semi-solid composite extrusion was most evidently manifested in the increased hardness and yield strength of this material when processed by extrusion.
This paper focuses on the effect of PVC-MA as a coupling agent on the thermal properties of the rHDPE/EVA/ ESP composites using thermogravimetric (TGA) and differential scanning analysis (DSC).
In this study, the SHS processes were conducted to prepare TiB2- Al2O3 and CrB2-Al2O3 composites. Composition and structure of synthesis products in the system B2O3-Cr2O3 and A1 were investigated. P101-18 CONTINUOUS PROCESSING AND QUALITY INSPECTION OF WOVEN PREPREGS Jens Schmidt (Fraunhofer ISC-HTL)
P102-18 A STUDY ON PROPERTIES OF BISMALEIMIDE RESIN MODIFIED BY BENZOXAZINE FOR RTM PROCESS Gang Liu (AVIC Composites Center), Jianwen Bao (AVIC Composites Center) Bismaleimide resin for resin transfer molding process was modified by the benzoxazine (BOZ) with low curing shrinkage and its properties were investigated.
P101-19 SYSTEMATIC COMPARISON BETWEEN CARDING AND PAPER-MAKING METHOD FOR PRODUCING DISCONTINUOUS RECYCLED CARBON FIBER REINFORCED THERMOPLASTICS Haowen Wei (The University of Tokyo), Hooseok Lee (The University of Tokyo), Wataru Nagatsuka (The University of Tokyo), Isamu Ohsawa (The University of Tokyo), Kazumasa Kawabe (Industrial Technology Center of Fukui Prefecture), Tetsuhiko Murakami (Industrial Technology Center of Fukui Prefecture), Ken Sumitomo (Tokyo), Jun Takahashi (The University of Tokyo)
P102-19 MEASUREMENT AND ANALYTICAL OF TOW/ MATRIX INTERFACIAL MECHANICAL PROPERTIES IN CARBON/CARBON COMPOSITE Chenghai Xu (Harbin Institute of Technology), Desheng Xu (Harbin Institute of Technology), Ying Fu (Harbin Institute of Technology), Songhe Meng (Harbin Institute of Technology)
P103-18 HIGH THERMAL CONDUCTIVITY OF DIAMOND PARTICLES DISPERSED ZR-ALLOYED CU MATRIX COMPOSITES PRODUCED BY GAS PRESSURE INFILTRATION Hailong Zhang (University of Science and Technology Beijing) Diamond particles dispersed Zr-alloyed Cu matrix composites were produced by a gas pressure infiltration method. A maximum thermal conductivity of 930 W/mK was obtained at 0.5 wt.% Zr addition. P103-19 IN-SITU SYNTHESIZED MAGNESIUM MATRIX COMPOSITES Tongxiang Fan (Shanghai Jiaotong University-State Key Lab of Metal Matrix Composites), Di Zhang (Shanghai Jiaotong University-State Key Lab of Metal Matrix Composites)
An approach to increase the mechanical properties of plant-derived resin and NFRP were achieved to reduce environmental load and petroleum consumption, through chemical analysis. P104-19 EXPERIMENTAL STUDIES OF THE EFFECT OF HYGROTHERMAL AGING ON FATIGUE OF NATURAL FIBER COMPOSITE Mahdi Mejri (Laboratory of Mechanics and Eco-Materials and Research Team in CAD/calculation integration-University of Quebec in Trois-Rivières), Lotfi TOUBAL (Laboratory of Mechanics and Eco-Materials-University In this work, TiC/AZ91D composites simultaneously in of Quebec in Trois-Rivières), Jean-Christophe Cuillère situ synthesized will be introduced, the compressive (Research Team in CAD/calculation integration-University mechanical properties and the damping properties of this of Quebec in Trois-Rivières), Vincent François (Research composite will be further discussed. Team in CAD/calculation integration-University of Quebec in Trois-Rivières)
Two kinds of manufacturing method for discontinuous recycled carbon fibers reinforced thermoplastics will be discussed and compared by the mechanical properties
P101-20 TESTING OF THE MATERIAL CHARACTERISTICS OF RECYCLED GLASS FIBRE REINFORCED POLYMER FOR THE USE IN BEARING STRUCTURES Tihomir Stefic (University of J.J.Strossmayer of OsijekFaculty of Civil Engineering Osijek), Aleksandar Juric (University of J.J.Strossmayer of Osijek-Faculty of Civil Engineering Osijek), Pavao Marovic (University of SplitFaculty of Civil Engineering-Architecture and Geodesy) Testing of some basic characteristics of recycled and original glass fibre reinforced polymer was conduted and appropriate diagrams are proposed in order to describe the tested materials.
26
P102-20 EFFECT OF FIBER DOSAGE ON FIBER REINFORCED CONCRETE BOND-SLIP PERFORMANCE Yafang Zhang (Guangzhou University), Hao Liu (Guangzhou University), Yi Yang (Guangzhou University), Qinghua Wu (Guangzhou University) The bond-slip performance of interface between steel fiber and concrete has been stuided in details by adopting both experimental and numerical methods.
P104-18 EFFECT OF CHEMICAL MODIFICATION FOR KENAF FIBER ON MECHANICAL PROPERTIES OF FURAN BASED NERP Jun Nakai (Tokyo Institute of Technology), Masatoshi Kubouchi (Tokyo Institute of Technology), Hiroha Tanaka (Tokyo Institute of Technology)
P103-20 A EXPERIMENTAL STUDY OF SURFACE MODIFICATION OF TA2 USING MICRO-BEAM PLASMA ARC Rongjuan Yang (School of Aerospace Engineering), Dongyun Ge (School of Aerospace Engineering), Zongde Liu (Key Laboratory of Condition Monitoring and Control for Power Plant Equipment of Ministry of Education) The surface remelting was performed on commercial pure titanium TA2 using micro-beam plasma arc under 3 working conditions.the sample remelted 1 time with cooling water exhibits excellent performance
The present work is focused on investigating the effects of hygrothermal aging on the quasi-static and fatigue behavior of a polyethylene composite reinforced with 40%wt of short birch fibers. P104-20 PREPARATION AND CHARACTERIZATION OF GREEN COMPOSITE USING BIOMIMETIC MODIFIED LIGNIN Sunghoon Kim (Graduate school student), Jongshin Park (Seoul National University) In this study, two types of alkyl-chain modification agents.As a result, the physical properties of the resulting blends were limited by alkyl chain of modified lignin.
In this research,we use dielectrophoresis to make a spaced alignment of metal nanowires which will increase the reflection of substrate and result in negative effect on optical properties.
P105-18 THERMAL AND MECHANICAL CHARACTERIZATION OF RESIN TRANSFER MOLDED TRI-COMPONENT POLYESTER / GLASS FIBER / MODIFIED CLAYS COMPOSITES. Daiane Romanzini (UFRGS), Vanessa Piroli (UCS), Ademir J. Zattera (UCS), Sandro C. Amico (UFRGS) Evaluation of the effect of cation exchange and silane modified montmorillonite (MMT) nanoclays, on dispersion, mechanical, thermal properties and flammability of polyester/glass fiber composites. P105-19 QUALITATIVE CHARACTERIZATION OF NANOCLAY PARTICLE EMISSIONS FROM PP NANOCOMPOSITES AFTER THERMAL DEGRADATION Nazanin Alipour (Royal Institute of Technology), Emma Strömberg (Royal Institute of Technology(KTH)), Jonas Enebro (SP) The degradation and release of nanoclays from PP nanocomposite was simulated in a prototype exposure chamber under controlled conditions to evaluate and characterise the released particles.
P105-20 FABRICATION OF ES-NANOFIBER IMPRINTING PLASTIC MOLD AND MICROSTRUCTURED PARTS BY NANOPOWDER PRINTING Kazuaki Nishiyabu (Kinki University) Electrospinning nanofiber imprinting was developed to produce the plastic mold with microstructures and was applied for contact printing using paste consisting of nanopowder and followed by sintering.
Posters and mini-orals programme// Tuesday 21 July Stage 1 13:00 Mini Oral Session II P201-1 MECHANICAL PROPERTIES AND CURING BEHAVIOUR OF GRAPHITE/OXIDE EPOXY NANOCOMPOSITES R. Mikael Larsen (Aalborg University) Graphite oxide is added to epoxy using the functional groups to form stronger bonds to the epoxy network and thus improving the mechanical properties.
P201-2 DYNAMIC MECHANICAL ANALYSIS OF CELLULOSE NANOFIBER/POLYESTER RESIN COMPOSITES Alessandra Lavoratti (UNIVERSIDADE DE CAXIAS DO SUL), Lisete Cristine Scienza (Universidade Federal do Rio Grande do Sul), Ademir José Zattera (UNIVERSIDADE DE CAXIAS DO SUL) This study presents a recently developed method for processing cellulose residues by grinding them into cellulose nanofibers (CNFs) to be used in composite materials.
P201-3 FUNCTIONALIZED NANOCARBON BASED POLYMER COMPOSITES AND ITS FEASIBLE APPLICATION AT LEO SPACE ENVIRONMENT Seung-Bo Jin (Korea Aerospace Research Institute), Jae-Young No (Korea Advanced Institute of Science and Technology), Chun-Gon Kim (Korea Advanced Institute of Science and Technology)
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
P202-1 HIGH STRAIN RATE AND HYGROTHERMAL EFFECTS ON MECHANICAL PROPERTIES OF LAMINATED COMPOSITES Yiting Wu (Tsinghua University), Dongyun Ge (Tsinghua University), Chen Li (Tsinghua University)
P203-1 JOINT AND ASSEMBLING OF HUGE COMPOSITE TOP-HAT STIFFENED HULLS Jifeng Zhang (Harbin Engineering Universtiy), Limin Zhou (The HongKong Polytechnic University)
P204-1 AN APPROACH FOR MULTI-OBJECTIVE OPTIMIZATION OF HYBRID MATERIAL STRUCTURES FOR MOBILITY APPLICATIONS Vahid Ghaffarimejlej (Technische Universität Braunschweig), Sebastian kleemann (Technische Universität Braunschweig), Thomas Vietor (Technische Universität Braunschweig)
P205-1 EFFECTIVE VOLUME OF CURVED BEAM UDCFRP SPECIMEN FOR OUT-OF-PLANE STRENGTH BY 4-POINT BENDING Eiichi Hara (JAXA), Tomohiro Yokozeki (The university of Tokyo), Yutaka Iwahori (JAXA)
The impact mechanical performances of T300 carbon fiber reinforced epoxy resin matrix composite laminates under hygrothermal circumstance and high strain rate are investigated using SHPB.
P202-2 APPLICABILITY OF A TAPPING METHOD TO NON-DESTRUCTIVE INSPECTION OF CARBON FIBER REINFORCED THERMOPLASTICS Xiuqi Lyu (The University of Tokyo), Jun Takahashi (The University of Tokyo), Isamu Ohsawa (The University of Tokyo) Tapping method including both global method and local method was introduced to detect defects such as voids caused by inadequate molding or inappropriate use or inappropriate use of CFRTP parts.
P202-3 ANALYSIS OF DEFORMATION AND FAILURE OF POLYMER-BONDED EXPLOSIVES USING COUPLED PLASTIC DAMAGE MODEL Xicheng Huang (China Academy of Engineering), Chengjun Chen (China Academy of Engineering), Gang Chen (China Academy of Engineering), Ming Liu (China Academy of Engineering)
Recent advances in the development of nanocarbons (in- A damaged plasticity model for the specific composite cluding carbon nanotube, graphene and their assembly) material PBX was used to describe the deformation have gained much interest in the aerospace field. and failure characteristics of PBX under complex stress states and at various strain rates.
P201-4 STUDY ON PREPARATION AND FLAME RETARDANT PROPERTIES OF EPOXY/GRAPHENE OXIDE NANOSHEETS COMPOSITES Jia-Ming Yang (Hungkuang University), Chin-Lung Chiang (Hungkuang University) The flame retardant containing silicon and phosphorus was grafted onto the surface of graphene oxide nanosheets via a condensation reaction and it can improve the flame retardancy of epoxy resin.
P202-4 DETECTION OF SMALL-SIZED DAMAGE IN A UNIFORM BEAM USING VIBRATORY POWER ESTIMATED FROM THE MEASURED VELOCITIES BY A LASER SCANNING VIBROMETER Jae Kwan Kim (Seoul National University), Young Cheol Huh (Korea Institute of Machinery and Materials), Tae Young Chung (Korea Institute of Machinery & Materials) A small size damage in a beam is identified with the damage index derived from the vibratory power. The vibratory power is estimated from the velocity data measured with laser scanning vibrometer.
In the paper, a bolted joint scheme was studied to be used in foam inserted top-hat stiffened composite hull. and a 4m×2m×1.5m model was manufactured with the scheme proposed.
P203-2 MODIFIED FICK’S LAW AND TSAI METHOD APPLIED TO THE ANALYSIS OF ADHESIVE BONDED COMPOSITE REPAIR Yin Yu (Shanghai Jiao Tong University), Xiu-Hua Chen (Shanghai Jiao Tong University), Kun-Hua Han (Shanghai Jiao Tong University), Hai Wang (Shanghai Jiao Tong University)
Layup optimization for a composite part -in a structure made by metal and composite- subject to 3 axial loads using Genetic Algorithm. Two approaches for reducing the number of analyses are described. P204-2 ANALYSIS OF STRAIN UNIFORMITIES IN ASYMMETRIC BI-STABLE COMPOSITE LAMINATES Diankun Pan (Harbin Institute of Technology), Fuhong Dai (Harbin Institute of Technology) It is found that the distributions of strains in asymmetric bistable composite laminates are uniform，and the variations of strains during snap-though are also even.
The coupled hygro-thermo-stress analysis method on adhesively bonded repaired composite under hygrothermal and mechanical loads environment was investigated and verified by the test.
P203-3 ADHESION BONDING IMPROVEMENT OF PEEK/CARBON FIBER RECYCLABLE COMPOSITES BY SURFACE REDUCTION OR EPOXYDATION Emile Perez (Laboratoire des IMRCP), Nathalie Dendele (Laboratoire des IMRCP), Sophie Franceschi (Laboratoire des IMRCP), Aurélie Léonardi (Institut Carnot CIRIMAT), Eric Dantras (Institut Carnot CIRIMAT), Colette Lacabanne (Institut Carnot CIRIMAT) The surface modification of PEI Ultem® 1000 was successfully achieved by the use of sodium borohydride as a mild reducing agent. The new chemical structure of reduced polyetherimide was determined by
P203-4 EVALUATION OF SURFACE TREATMENT METHODS FOR PA6 FRP BONDING WITH ADHESIVES Toru Ohnishi (Tokyo Institute of Technology), Kazumasa Shimamoto (Tokyo Institute of Technology), Masato Katano (Tokyo Institute of Technology), Hiroshi Okamoto (Tokyo Institute of Technology), Yu Sekiguti (Tokyo Institute of Technology), Chiaki Sato (Tokyo Institute of Technology) To find suitable surface treatment for PA6 FRP, strengths of adhesively bonded joints had experimentally been evaluated. Enough strength for structural bonding was obtained by some treatment methods.
P204-3 ON THE MECHANICAL BEHAVIOUR OF A BUTT JOINTED THERMOPLASTIC COMPOSITE UNDER BENDING Ismet Baran (University of Twente-Faculty of Engineering Technology), Laurent Warnet (University of TwenteFaculty of Engineering Technology), Remko Akkerman (University of Twente-Faculty of Engineering Technology) Crack initiation and propagation mechanisms for the filler and the delamination at the skin-filler interface were captured experimentally and numerically for an AS4/ PEKK hybrid joint under bending.
P204-4 AN APPROXIMATE ANALYTIC SOLUTION FOR DISTORTION OF THIN-WALLED ORTHOTROPIC BEAMS WITH SYMMETRIC CROSS-SECTIONS SECTIONS SUBJECTED TO TORSION Bože Plazibat (University of Split-The University Department of Professional Studies), Frane Vlak (University of Split-FESB) The section distortion of thin-walled beams made of isotropic and orthotropic materials with approximately equal modulus of elasticity in both directions under torsion is considered.
In order to evaluate size effects of out-of-plane strength of CFRP curved beam, two equations for calculating effective volume were derived. Weibull statistics were applied to evaluate size effects.
P205-2 INFRARED SIGNATURES OF BONDED INTERFACES FOR THE REPAIR OF PRIMARY STRUCTURES IN COMPOSITE MATERIAL Barus Matthias (Université Paul Sabatier), Francis Collombet (Université Paul Sabatier), Hélène Welemane (Ecole Nationale d’Ingénieurs de Tarbes), Laurent Crouzeix (Université Paul Sabatier), Arthur Cantarel (Université Paul Sabatier), Yves-Henri Grunevald (Composites Expertise & Solutions), Valérie Nassiet (Ecole Nationale d’Ingénieurs de Tarbes), Marie-Laetitia Pastor (université Paul Sabatier) This work aims at evaluating bonded repaired composite structures by means of Infrared Thermography. It presents the characterisation of a heat flow by inverse identification. P205-3 NON-DESTRUCTIVE TESTING OF DEFECTS IN THICK COMPOSITES BY MEANS OF PULSE AND LOCKIN THERMOGRAPHY TECHNIQUES Alper Aktas (National Physical Laboratory), Michael Gower (National Physical Laboratory), Richard Shaw (National Physical Laboratory), Rob Simpson (National Physical Laboratory), Louise Wright (National Physical Laboratory), Sam Gnaniah (National Physical Laboratory), Lindsay Chapman (National Physical Laboratory), Gordon Pilkington (National Physical Laboratory) This study focuses on non-destructive inspection of defects within thick GFRP and CFRP composites by means of pulse and lock-in thermography techniques to evaluate the detection limits. P205-4 A BENCHMARK FOR VIBRATION-BASED STRUCTURAL DAMAGE ASSESSMENT OF COMPOSITES USING WAVELET ANALYSIS Andrzej Katunin (Silesian University of Technology) The benchmark consists of 143 simulation and experimental studies on damage assessment in composite structures using wavelet analysis of modal shapes of vibration.
27
//Posters and mini-orals programme Tuesday 21 July Stage 1 13:00 Mini Oral Session II P201-5 GRAPHENE/NICKEL COMPOSITE NANOWIRES UNDER UNIAXIAL COMPRESSION: A MOLECULAR DYNAMICS SIMULATION STUDY Zhenyu Yang (Beihang University), Jian Sun (Beihang University), Zixing Lu (Beihang University), Guipin Lin (Beihang University) The compressive behaviours of the nanolayered graphene/nickel composites nanowires (NWs) are studied with considering effects of layer spacing and temperature.
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
P202-5 MICROSTRUCTURAL AND EXPERIMENTAL ANALYSIS OF STRAIN RATE EFFECT FOR SHORT GLASS FIBER REINFORCED POLYPROPYLENE Nadia Achour Renault (Ensam), Joseph Fitoussi (Ensam), Jean François Vittori (Renault), Fodil Meraghni (Ensam)
P203-5 DESIGN AND OPTIMIZATION OF GRADIENT CELLULAR STRUCTURES Li Ma (Harbin Institute of Technology)
P204-5 EFFECT OF THE REINFORCING SIC, CG AND GRP PARTICLES ON THE STRUCTURE AND PROPERTIES OF COMPOSITE PISTONS BASED ON ALSI7MG2SR0.03 ALLOY Sonia Boczkal (Institute of Non-Ferrous Metals in Gliwice), Marzena Lech-Grega (Institute of Non-Ferrous Metals in Gliwice), Wojciech Szymański (Institute of Non-Ferrous Metals in Gliwice), Marek Nowak (Institute of Non-Ferrous Metals in Gliwice), Anna Dolata (Silesian University of Technology )
P205-5 INTEGRATION OF SENSOR ELEMENTS IN FIBRE-REINFORCED THERMOPLASTICS USING REMOTE LASER PROCESSING Teresa Möbius (Technische Universität Dresden), Frank Adam (Technische Universität Dresden), Niels Modler (Technische Universität Dresden), Andreas Fürst (Fraunhofer IWS Dresden), Annett Klotzbach (Fraunhofer IWS Dresden), Jan Hauptmann (Fraunhofer IWS Dresden), Eckhard Beyer (Fraunhofer IWS Dresden)
Combine with FE method and a genetic algorithm, a numerical methodology for design of gradient auxetic The scope of this work is to provide a microstructural de- cellular structures was proposed and the geometrical scription and an experimental analysis of the strain rate and physical parameters were designed. effect on short glass fiber reinforced polypropylene.
The study gives characteristics of the structure and properties of the composite pistons based on AlSi7Mg2Sr0.03 alloy with different proportional content of SiC, Cg and GRp particles. P201-6 GRAPHENE- BASED COMPOSITE MATERIALS FOR AUTOMOTIVE Ahmed Elmarakbi (University of Sunderland), Brunetto Martorana (Centro Ricerche Fiat S.C.p.A) This work advances innovative lightweight GRAPHENE based materials and their related modelling, designing, manufacturing, and joining capabilities suitable for large scale automotive productions.
P202-6 DAMAGE BEHAVIOR IN PAPER-BASED FRICTION MATERIALS SUBJECTED TO COMPRESSIVE LOADING UNDER ELEVATED TEMPERATURE Tomoyuki Fujii (Shizuoka University), Keiichiro Tohgo (Shizuoka University), Naoya Urata (Shizuoka University), Shunya Kozaki (Shizuoka University), Yoshinobu Shimamura (Shizuoka University), Tomohiro Hasegawa (F.C.C. Co.-Ltd), Shintaro Yagi (F.C.C. Co.-Ltd), Yoichi Ito (F.C.C. Co.-Ltd) This paper deals with investigation on microscopic damage behavior in paper-based friction materials subjected to compressive loading at elevated temperature.
P201-7 THERMAL EVALUATION AND PREPARATION OF MORTAR CONTAINING N-HEXADECANE/XGNP SSPCM FOR ENERGY EFFICIENT BUILDINGS Sumin Kim (Soongsil University), Su-Gwang Jeong (Soongsil University), Seong Jin Chang (Soongsil University), Sughwan Kim (Soongsil University) We prpared the SSPCM which has high heat stotage property and it applied to a mortar. As a result, we confirmed that heat stroage mortar has time lag effect and energy saving.
P202-7 INVESTIGATION OF THE DELAMINATION BEHAVIOR ON CARBON FIBER TAPE REINFORCED THERMOPLASTICS Mikio Akamatsu (The University of Tokyo), Toshiro Ohori (The University of Tokyo), Takahiro Hayashi (The University of Tokyo), Jun Takahashi (The University of Tokyo) This study deals with L-shaped specimen made of CTT material. The fracture behavior and flexural rigidity of CTT in curved structure were verified, compared with UD material.
P203-6 EXPERIMENTAL AND NUMERICAL STUDY ON THE EFFECT OF STIFFENER STIFFNESS ON COMPRESSIVE STABILITY OF STIFFENED COMPOSITE PANEL Yuequan Wang (Nanjing University of Aeronautics and Astronautics), Shuhua Zhu (Nanjing University of Aeronautics and Astronautics), Mingbo Tong (Nanjing University of Aeronautics and Astronautics), Xing HU (Nanjing University of Aeronautics and Astronautics), Xiaowei Jiang (Nanjing University of Aeronautics and Astronautics)
P203-7 THE PREPARATION AND STUDY OF FLAME RETARDANT FOR EXPANDABLE POLYSTYRENE Yazhen Wang (Qiqihar University), Yongsheng Zhang (Qiqihar university), Guoli Chen (Qiqihar University), Haiyang Chang (Qiqihar University), Liwu Zu (Qiqihar University) A composite flame retardant for expandable polystyrene was reported, in which phenol formaldehyde resin (PF) was used as coating agent, graphite oxide(GO)was used as flame retardant.
P204-6 COMPOSITE POWER PYLONS FOR HIGH VOLTAGE TRANSMISSION LINES Mehrtash Manouchehr (Technical University of Denmark (DTU)), Christian Berggreen (Technical University of Denamrk (DTU)) Different stages of a project aimed at the development of a new composite power pylon for high voltage transmission lines is described. Finite element model and experimental test plans have been shown
The integration of sensor elements in fibre-reinforced thermoplastic textiles using remote laser processing was analysed with special focus on grade of modification of the textile layers. P205-6 COMPOSITE MICROPOWDERS FOR ADDITIVE TECHNOLOGIES. Pavel Lykov (Federal State State-Financed Educational Institution of High Professional Education “South Ural State University” (National Research University) FSSFEI HPE “SUSU” (NRU) ), Sergei Vaulin (Federal State StateFinanced Educational Institution of High Professional Education “South Ural State University” (National Research University) FSSFEI HPE “SUSU” (NRU) ), Sergei Sapozhnikov (Federal State State-Financed Educational Institution of High Professional Education “South Ural State University” (National Research University) FSSFEI HPE “SUSU” (NRU) ), Igor Shulev (Federal State StateFinanced Educational Institution of High Professional Education “South Ural State University” (National Research University) FSSFEI HPE “SUSU” (NRU) ), Dmitrii Zherebtsov (Federal State State-Financed Educational Institution of High Professional Education “South Ural State University” (National Research University) FSSFEI HPE “SUSU” (NRU) ), Ruslan Abdrahimov (Federal State State-Financed Educational Institution of High Professional Education “South Ural State University” (National Research University) FSSFEI HPE “SUSU” (NRU) )
The technology of obtaining composite micropowders, allowing the production of a wide range of composite powders suitable for use in additive technologies, is proposed. P204-7 COMPARISON BETWEEN SIMULATED CENTRAL P205-7 STRUCTURES AND PHYSICAL PROPERTIES SUPPORT TESTS AND TWO-SPAN PANEL TESTS FOR OF POLYETHYLENE/BORON NITRIDE COMPOSITES BY SANDWICH PANELS REACTIVE EXTRUSION Harald Nelke (TU Darmstadt), Jörg Lange (TU Darmstadt) Soon Man Hong (Korea Institute of Science and Technology (KIST)), Bum Ki Baek (Korea Institute of Simulated central support and two-span tests agree Science and Technology (KIST)), Seunggun Yu (Korea fairly well for the first failure mode. But EN 14509 does Institute of Science and Technology (KIST)), Yun Ho La not predict the resistance (shear, core compression, (Korea Institute of Science and Technology (KIST)), Jun wrinkling) at mid support correctly. Pyo Hong (Korea Institute of Science and Technology (KIST)), Chong Min Koo (Korea Institute of Science and Technology (KIST)) High-density polyethylene (HDPE) composites with chemically modified boron nitride (mBN) fillers, functionalized with an organosilane, were manufactured by twin screw reactive extrusion(REX) process.
28
Posters and mini-orals programme// Tuesday 21 July Stage 1 13:00 Mini Oral Session II P201-8 GRAPHENE OXIDE FUNCTIONALIZATION WITH POLYSILOXANES FOR ADVANCED COMPATIBILITY IN EPOXY NANOCOMPOSITES Celina Maria Damian (University Politehnica of Bucharest), Maria Adina Vulcan (University Politehnica of Bucharest), Gheorghe Hubca (University Politehnica of Bucharest), Razvan Petre (Scientific Research Center for CBRN Defense and Ecology), Horia Iovu (University Politehnica of Bucharest) The incorporation of GO functionalized with glycidyloxy type silane in epoxy matrix increased the properties of the final composites by creating a compatible interface between the matrix and the GO. P201-9 EMBEDDED TRILAYER GRAPHENE FLAKES UNDER INEFFICIENT TENSILE AND COMPRESSIVE LOADINGS Georgia Tsoukleri (Foundation of Research and Technology Hellas-Institute of Chemical Engineering and High Temperature Processes), John Parthenios (Foundation of Research and Technology HellasInstitute of Chemical Engineering and High Temperature Processes), Costas Galiotis (Foundation of Research and Technology Hellas-Institute of Chemical Engineering and High Temperature Processes), Konstantinos Papagelis (University of Patras)
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
P202-8 FRACTURE BEHAVIOR OF CROSS-PLY FIBRE REINFORCED COMPOSITE LAMINATES WITH CRACKS UNDER BIAXIAL LOADING CONDITIONS Nguyen Hai Dang (Nanyang Technological University), Sridhar Idapalapati (Nanyang Technological University), Narasimalu Srikanth (Nanyang Technological University)
P203-8 IMPACT DAMAGE AND PERFORATION OF THIN MONOLITHIC ALUMINIUM ALLOY PLATES: INSIGHTS FOR IMPACT RESISTANT POLYMER-METAL BILAYER LAMINATES Kedar Pandya (University of Cambridge), Graham McShane (University of Cambridge), William Stronge (University of Cambridge)
P204-8 SHEAR-DOMINATED BENDING BEHAVIOR OF CARBON/EPOXY COMPOSITE LATTICE ISOBEAM STRUCTURES David W Jensen (Brigham Young University), Kirsten Hinds (Brigham Young University)
P205-8 PHOTOPOLYMERIZABLE HYBRID COMPOSITIONS BASED ON (THERMO) PHOTOSENSITIVE MONOMER UNITS USED AS ORGANIC MATRIX FOR SILVER AND ZNO NANOPARTICLES Emil Constantin Buruiana (Petru Poni Institute of Macromolecular Chemistry), Tinca Buruiana (Petru Poni Institute of Macromolecular Chemistry), Viorica Podasca (Petru Poni Institute of Macromolecular Chemistry)
Three 0.6 m long rectangular carbon/epoxy composite This study is to investigate the effects of the biaxial lattice (IsoBeam™) structures manufactured (0.8 kg) stress states on failure behaviors of composite laminates Numerical and experimental studies on the impact reand tested in 3-point shear-dominated bending demonwith cracks under static conditions. sponse of thin aluminium alloy plates in terms of ballistic strated considerable ductility and potential. limit velocity, energy absorption capability and sensitivity to projectile nose shape.
P202-9 FATIGUE MECHANICAL BEHAVIOR OF MWCNT REINFORCED GFRP COMPOSITES UNDER THE PRESENCE OF ARTIFICIAL DEFECTS Ilona LAZARIDOU (UNIVERSITY OF THE AEGEAN), Nikolaos ALEXOPOULOS (UNIVERSITY OF THE AEGEAN), Evangelos FAVVAS (DEMOCRITUS Research Center), Markos PETOUSIS (Crete Institute of Technology), Achilles VAIRIS (TEI CRETE) The present work investigates on the effect of artificial surface defects of glass fiber reinforced polymers (GFRP) under constant amplitude fatigue loadings and for various nano-reinforced matrices.
P203-9 MODELING DRY FABRICS UNDER IMPACT WITH A 3D DISCRETE ELEMENT METHOD (DEM) Jeremie Girardot (Institute of Mechanics and Mechanical Engineering (I2M)), Frederic Dau (Institute of Mechanics and Mechanical Engineering (I2M)) n impact simulation scenario is performed to validate the implementation satisfying the criterion of energy conservation. Numerical results with DEM are compared to finite elements ones.
P204-9 EFFECT OF THERMAL CYCLING ON THE MECHANICAL PROPERTIES OF CFRP FOR PRECISE SPACE STRUCTURE Satoshi Kobayashi (Tokyo Metropolitan University), Ken Goto (Japan Aerospace Exploration Agency), Minoru Iwata (Kyushu Institute of Technology) Thermal cycle tests were conducted on carbon fiber reinforced poly-cyanate ester and epoxy resin. Transverse cracks in 90º layers and delamination occurred. Bending modulus, however did not decrease.
The mechanical response of ABA 3LG flakes loaded in tension and compression embedded on polymer beams is monitored by simultaneous Raman measurements through the strain sensitivity of G or 2D peaks.
Photopolymerized polymer composites incorporating Ag and ZnO nanoparticles into urethane acrylic monomers and hybrid monomers were synthesized and characterized as dye photocatalyst. P205-9 POLYMERIC IONIC LIQUIDS AS SEPARATORS FOR ALL-SOLID STATE THIN-FILM ELECTROCHROMIC DEVICES AND LI BATTERIES Alexander Shaplov (A.N. Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS)), Denis Ponkratov (A.N. Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS)), PierreHenri Aubert (Universite´ de Cergy-Pontoise), Elena Lozinskaya (A.N. Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS)), Cédric Plesse (Universite´ de Cergy-Pontoise), Petr Vlasov (Saint-Petersburg State University), Michel Armand (University de Picardie Jules Verne), Mathieu Morcrette (University de Picardie Jules Verne), Frédéric Vidal (Universite´ de Cergy-Pontoise), Yakov Vygodskii (A.N. Nesmeyanov Institute of Organoelement Compounds Russian Academy of Sciences (INEOS RAS)) The all-polymer electrochromic devices were made from polymeric ionic liquids and PEDOT. The advantages are: simplicity, fast switching(3÷5 s), high coloration efficiency (430 cm2/C), work in vacuum.
P201-10 INFLUENCE OF DISPERSION METHOD TO DISPERSIBILITY AND MECHANICAL PROPERTIES OF ULTRA-THIN CARBON FIBER TAPE REINFORCED THERMOPLASTICS Hirofumi Suganuma (The University of Tokyo), Shinichiro Yamashita (The University of Tokyo), Xin Zhang (The University of Tokyo), Kouji Hashimoto (The University of Tokyo), Isamu Ohsawa (The University of Tokyo), Jun Takahashi (The University of Tokyo) The applicable range of the methodology was experimentally verified to be practical and the cause of the difference between theory and experiment was elucidated.
P202-10 MECHANICAL PROPERTIES OF CARBON NANOTUBE FIBER MATERIALS UNDER MONOTONIC AND CYCLIC TENSILE LOADING Qing-Sheng Yang (Beijing University of Technology), Zhong-Jun Yang (Beijing University of Technology)
P203-10 AN EXPERIMENTAL STUDY OF LOW VELOCITY IMPACT OF CARBON, GLASS AND MIXED FIBER COMPOSITE PLATES Ahmed Alomari (King Fahd University of Petroleum & Minerals), Abul Fazal M. Arif (King Fahd University of Petroleum & Minerals), M. Haris Malik (King Fahd University of Petroleum & Minerals), Faleh Alsulaiman (King Fahd University of Petroleum & Minerals), Shafique Khan (King Fahd University of Petroleum & Minerals) In this work, impact response of composite laminates was experimentally studied to determine the energy absorption. Three types of composites were used: carbon, glass and mixed fiber composite plates.
P204-10 PARAMETER STUDY OF THERMAL PROTECTION FUNCTION INTEGRATED SANDWICH STRUCTURES FOR AEROSPACE APPLICATION Songhe Meng (Harbin institute of technology), Qiang Yang (Harbin institute of technology), Weihua Xie (Harbin institute of technology), Shanyi Du (Harbin institute of technology), Yongxia Li (Harbin institute of technology)
P205-10 HIGH-STRENGTH, HIGH-DISSIPATION CARBON NANOTUBE NANO-COMPOSITES: THEORY AND EXPERIMENTS Walter Lacarbonara (Sapienza University of Rome), Giulia Lanzara (Universty of Rome Tre), Michela Talò (Sapienza University of Rome), Giovanni Formica (University of Rome Tre) Carbon nanotube nanocomposites with tunable interfacial CNT-matrix properties are explored experimentally for optimal strength and dissipation performance.
29
//Posters and mini-orals programme Tuesday 21 July Stage 1 13:00 Mini Oral Session II P201-11 FLOWABILITY OF DISCONTINUOUS CARBON FIBER REINFORCED THERMOPLASTICS Shuli Tang (The University of Tokyo), Takahiro Hayashi (The University of Tokyo), Hanchul Lee (The University of Tokyo), Wataru Nagatsuka (The University of Tokyo), Isamu Ohsawa (The University of Tokyo), Jun Takahashi (The University of Tokyo) The investigation of effect of tape length and molding conditions on flowability of UT-CTT with rib structure and observation of fiber orientation to characterize the flow behavior.
P201-12 MECHANICAL BEHAVIOR OF THE BRITTLE MATRIX LAYERED COMPOSITE REINFORSED BY SHORT FIBERS Andrejs Krasnikovs (Institute of Mechanics-Riga Technical University), Olga Kononova (Institute of Mechanics-Riga Technical University), Arturs Machanovskis (Institute of Mechanics-Riga Technical University), Vitalijs Lusis (Institute of Mechanics-Riga Technical University), Arturs Lukashenoks (Institute of Mechanics-Riga Technical University) Fracture of the brittle matrix composite material (CM) with short fibers is under investigation. Situation when fibers are uniformly distributed is compared with fibers arrange in layers. P201-13 MICROMECHANICAL ANALYSIS OF NONLINEAR RESPONSE OF FIBROUS COMPOSITES Yanchao Wang (Tongji University), Zhengming Huang (Tongji University)
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
P202-11 VISCOELASTIC DAMPING PERFORMANCE AND RHEOLOGICAL BEHAVIOUR OF CUPSTACKED CARBON NANOTUBE MODIFIED EPOXY NANOCOMPOSITES WITH RE-AGGLOMERATION NETWORK Xiao-Chong Zhang (University of Bristol), Fabrizio Scarpa (University of Bristol), Hua-Xin Peng (Zhejiang University), Ronan McHale (Thomas Swan Co. Ltd.)
P203-11 A NOVEL APPROACH FOR IMPACT MITIGATION USING MASS NEGATIVITY CONCEPT OF METACOMPOSITES K.T. Tan (The University of Akron)
Re-agglomeration network of CSNT/RTM6 nanocomposite is tailored by controlling filler content, processing time and temperature thus influenced the physical and mechanical properties of cured composite
P202-12 NONLINEAR STRESS RELAXATION OF NANOSILICA-FILLED SILICONE RUBBER FOAM COMPOSITES Wenjun Hu (China Academy of Engineering Physics), Xicheng Huang (China Academy of Engineering Physics)
We manufactured new lightweight ablator using a porous carbon material. This indicated high compressive strength compared with traditional ablators and good thermal insulation performance.
P203-12 CONTACT FORCE MEASUREMENT AND DELAMINATING RESPONSES OF COMPOSITE LAMINATE SUBJECTED TO SMALL-MASS-TUP IMPACT Yan chen (Shanghai Jiao Tong University), Baojun Ning (Shanghai Jiao Tong University), Zhefeng Yu (Shanghai Jiao Tong University), Bo Zhang (Shenyang institute of aircraft engine), Hongbo Liu (Shenyang institute of aircraft engine), Hai Wang (Shanghai Jiao Tong University)
P204-12 APPLICATION OF COMPOSITE MATERIAL IN THE AIRCRAFT STRUCTURE TO IMPROVE CRASHWORTHINESS Yiru Ren (Hunan University) This paper summarizes the crashworthiness design method for composite transport aircraft, and design concept of the frame, bottom structure and strut are discussed.
P205-11 EFFECT OF UV/VISIBLE LASER IRRADIATION ON SOME HYBRID FORMULATIONS CONTAINING PHOTOREACTIVE URETHANE (DI)METHACRYLATES AND GRAPHENE Anton Airinei (Petru Poni Institute of Macromolecular Chemistry), Tinca Buruiana (Petru Poni Institute of Macromolecular Chemistry), George Epurescu (2National Institute for Lasers-Plasma and Radiation Physics), Florentina Jitaru (Petru Poni Institute of Macromolecular Chemistry), Emil Constantin Buruiana (Petru Poni Institute of Macromolecular Chemistry), Ioana Ion (3National Institute for Research and Development in Electrical Engineering) Hybrid nanocomposites based on novel urethane monomers and graphene were prepared through UV photopolymerization/direct laser writing by femtosecond laser pulses, and characterized. P205-12 BIOINSPIRED FUNCTIONAL MATERIALS TEMPLATED FROM NATURE MATERIALS Zhang Di (shanghai jiao tong university), Jiajun Gu (shanghai jiao tong university), Wang zhang (shanghai jiao tong univerisity), Huilan Su (shanghai jiao tong university), Qinglei liu (shanghai jiao tong university), Shenming zhu (shanghai jiao tong university)
The contact force measurement based on the impactor response is numerically studied for the laminate subjected to small mass impact, and the response of laminate on the delamination are analysed.
P202-13 EFFECT OF WATER/CEMENT RATIO AND CURING TIME ON COMPRESSIVE STRENGTH OF MWCNT-CEMENT MORTAR Donghoon Kang (Korea Railroad Research Institute), Gang Seok Seo (Kyung Hee University), Wonseok Chung (Kyung Hee University)
An elasto-plastic bridging model is established to evaluate nonlinear behavior of composites. Using the equivalent fiber method, effects of an interphase on composites This study conducted experiments for improving the is studied numerically. compressive strength of cement mortar by adding MWCNTs w.r.t. MWCNT concentration, W/C ratio, curing age, and MWCNT concentration adjustment methods.
30
P204-11 CHARACTERIZATION AND EVALUATION OF HIGH-STRENGTH LIGHTWEIGHT ABLATOR USING POROUS CARBON MATERIAL Eisuke Kojo (Tokyo University of Science), Yuki Kubota (Tokyo University of Science), Yasuo Kogo (Tokyo Mass negativity concept of metacomposites is introUniversity of Science), Takuya Aoki (Japan Aerospace duced by analytical models. Impact attenuation and Exploration Agency-Chofu Aerospace Center), Toshio blast-wave mitigation are demonstrated by computation- Ogasawara (Japan Aerospace Exploration Agency-Chofu al simulation. Practical designs are proposed. Aerospace Center), Yuichi Ishida (Japan Aerospace Exploration Agency-Chofu Aerospace Center)
P203-13 ANTI-BLAST DESIGN OF CELLULAR SACRIFICIAL CLADDING BASED ON A NONLINEAR PLASTIC SHOCK MODEL Yuanyuan Ding (University of Science and Technology of China), Shilong Wang (University of Science and Technology of China), Zhijun Zheng (University of Science and Technology of China), Liming Yang (Ningbo University), Jilin Yu (University of Science and Technology of China) Dimensional analysis and a nonlinear plastic shock model based on the rigid–plastic hardening idealization was employed to guide the anti-blast design of cellular sacrificial cladding.
P204-13 ADSORPTION OF CO2 ON AMINE-GRAFTED ACTIVATED CARBON FIBER FABRICS Yu-Chun Chiang (Yuan Ze University), Chien-Yuan Hung (Yuan Ze University)
P205-13 STYLUS SUPPORT STRUCTURE AND FUNCTION OF RADULAR TEETH IN CRYPTOCHITON STELLERI Steven Herrera (University of California Riverside), Lessa Grunenfelder (University of Southern California), Enrique The ACFs modified with MEA and TPEDA were character- Escobar (Purdue University), Qianqian Wang (University ized and their CO2 adsorption isotherms were measured. of California Riverside), Christopher Salinas (University Results suggested that the aminated ACFs were the of California Riverside), Nicholas Yaraghi (University applicable adsorbents for CO2 adsorption. of California Riverside), Jeffrey Geiger (University of California Riverside), Richard Wuhrer (University of Western Sydney), Pablo Zavattieri (Purdue University), David Kisailus (University of California Riverside) The chiton feeding apparatus demonstrates a high level of control at multiple length scales to produce extremely lightweight designs for structural materials.
Posters and mini-orals programme// Tuesday 21 July Stage 1 13:00 Mini Oral Session II P201-14 UNDERSTANDING THE EFFECT OF IN-PLANE FIBER WAVINESS ON DAMAGE BEHAVIOR OF CURED WOVEN COPOSITES Masoud Haghi Kashani (University of British Columbia), Abbas. S. Milani (University of British Columbia) This article presents an experimental investigation into the mechanical behavior of a cured woven lamina under uniaxial tensile loading in warp and weft directions to assess in-plane waviness effect.
P201-15 INFLUENCE ON THE MECHANICAL BEHAVIOR OF CARBON FIBER FABRIC REINFORCED PPS LAMINATES UNDER DIFFERENT TEMPERATURE Wang Shiyu (Harbin Institute of Technology), Zhang Jiazhen (Harbin Institute of Technology), Zhou Zhengong (Harbin Institute of Technology), Wang Yue (Harbin Institute of Technology) With the temperature increasing up to Tg(120°C) of fiber fabrics reinforced PPS laminates degrades significantly the quality of the adhesion at the fiber/matrix interface. P201-16 LIGHTNING PROTECTION TESTING OF WET METALIZED POLYMER COMPOSITES Rajesh P. S. M. (Ecole Polytechnique de Montreal), Martin Gagne (Ecole Polytechnique de Montreal), Xavier Cauchy (Ecole Polytechnique de Montreal), Jolanta E. Klemberg-Sapieha (Ecole Polytechnique de Montreal), Frederic Sirois (Ecole Polytechnique de Montreal), Daniel Therriault (Ecole Polytechnique de Montreal) A qualitative analysis of the lightning protection ability of wet-metalized composites, studied via low energy strikes and resistive heating tests is presented.
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
P202-14 LIGHTWEIGHTING OPPORTUNITY USING FRP STEEL HYBRID Elspeth Keating (University of Warwick), Darren Hughes (University of Warwick), Janka Cafolla (Tata Steel Research and Development), Richard Dashwood (University of Warwick), Iain McGregor (Tata Steel Research and Development)
P203-14 PROBABILISTIC APPROACH FOR THE IMPACT ENERGY ABSORPTION OF CARBON/EPOXY COMPOSITE LAMINATES UPON BALLISTIC IMPACT Ju Won Park (Chungnam National University), Hyun Jun Cho (Chungnam National University), In-Gul Kim (Chungnam National University), Han Sol Lee (Chungnam National University), Jong Heon Kim (Agency for Defense Development)
P204-14 ACTUATION AND ENERGY HARVESTING OF DIELECTRIC ELASTOMERS AS FUNCTIONS OF THICKNESS, ELASTOMER TYPE AND CONSTITUENT CONTENT. Dong-Joo Lee (Yeungnam University), F.A. Y. Cui (Yeungnam University)
P205-14 EFFECTIVE ELECTRICAL CONDUCTIVITY OF CNT-EPOXY NANOCOMPOSITE Vladimir Kulakov (Institute of Polymer MechanicsUniversity of Latvia), Andrey Aniskevich (Institute of Polymer Mechanics-University of Latvia), Triinu Poltimae (Tallinn University of Technology)
The energy harvesting performance of an EADE (Electroactive dielectric elastomer) is studied as functions of constituent content, specimen geometries and types of loading
The effective electrical conductivity of an epoxy resin filled with the well-dispersed and randomly oriented carbon nanotubes (CNTs) was calculated by applying the micromechanical approach.
P202-15 EXPERIMENTAL ANALYSIS ON THE BEARING CAPACITY OF SANDWICH PANEL JOINTS Christina Kunkel (TU Darmstadt), Jörg Lange (TU Darmstadt)
P203-15 THERMAL AGING REDUCTION IN POLYMER MATRIX COMPOSITES Joe Hoffman (University of Denver), Maciej Kumosa (University Of Denver)
According to industry standards sandwich panels are not permissible for the full stabilization or bracing of steel structures. Possible joint reinforcement solutions are assessed experimentally.
This paper presents an approach to reduce the impact of thermal aging of hybrid glass/carbon fiber epoxy matrix composite rods utilized in novel high voltage transmission lines.
P204-15 EXPERIMENTAL SUB-COMPONENT INVESTIGATION OF WIND TURBINE BLADE RETROFIT REINFORCEMENTS Maurizio Sala (DTU - Technical University of Denmark), Christian Berggreen (DTU - Technical University of Denmark)
P205-15 MATERIAL CHARACTERIZATION AND VIBRO-ACOUSTIC ANALYSIS OF A PREIMPREGNATED CARBON FIBER REINFORCED EPOXY DRUM SHELL Manuel Ibañez (Rasch Drums), Alberto Gimenez (University CEU Cardenal Herrera), Fernando Sanchez (University CEU Cardenal Herrera) The vibro-acoustic behavior of composite materials are analyzed depending on their material characterization in a set of test conducted in different drum shell prototypes.
P202-16 FLEXIBLE SPACER FABRICS FOR REINFORCEMENT OF RIGID POLYURETHANE FOAMS IN SANDWICH STRUCTURES Kay Schäfer (Technische Universität Chemnitz), Jürgen Tröltzsch (Technische Universität Chemnitz), Frank Helbig (Technische Universität Chemnitz), Dariusz Niedziela (Fraunhofer Institute for Industrial Mathematics), Lothar Kroll (Technische Universität Chemnitz)
P203-16 EVALUATION BY AGING CYCLES OF TENSILE STRENGTHS AND DURABILITY CHARACTERISTICS OF MATERIALS REINFORCED BY CARBON, GLASS AND BASALT FIBERS Piero De Fazio (ENEA), Giuseppe Arleo (ENEA), Maria Bruna Alba (ENEA), Franco Bernardo (ENEA)
Experimental sub-component investigation of wind turbine blade reinforcement which aims to reduce the problems caused by longitudinal cracks detected at the blade trailing edge P204-16 INFLUENCE OF THE CUSP COMPLIANCE AND LAYERING METHOD ON THE CUSP DEFLECTION IN DENTAL BULK-FILL COMPOSITE RESTORATION. Yu-Jin Kim (Seoul national university), Ryan Jin-Young Kim (Seoul national university), In-Bog Lee (Seoul national university) The aim of this study was to investigate the effects of the layering method and cusp compliance on cusp deflection in bulk-fill and conventional composite restorations, and to examine the relationship
Coaxial electrospinning that is a branch of nanotechnology has attracted great attention. Due to the easy operation process, it is able to form special structure and multifunctional fibers. The rapid
Using both simulation and mechanical testing, PA6 GF60 and DP600 hybrids are shown to offer a 30% increase in specific stiffness with respect to steel only.
Spacer fabrics as reinforcement structure for rigid PUR foams achieve significant increases to the mechanical properties. Corresponding process simulation is developed for component designing.
P205-16 ELECTROSPUN CORE-SHELL COMPOSITE FIBER FILMS WITH SELF-HEALING PROPERTY Fenghua Zhang (Harbin Institute of Technology), Zhichun Zhang (Harbin Institute of Technology), Yanju Liu (Harbin Insititute of Technology), Jinsong Leng (Harbin Institute of Technology)
31
//Posters and mini-orals programme Tuesday 21 July Stage 1 13:00 Mini Oral Session II P201-17 FAILURE BEHAVIOR OF LAMINATED COMPOSITE PLATES UNDER ANTICLASTIC BENDING Yakup Okan Alpay (Bogazici University), Fazil O. Sonmez (Bogazici University), Nuri Ersoy (Bogazici University) Failure behaviour of composite plates under anticlastic bending is studied using a unique test fixture. This is a special case of biaxial out-of-plane loading that applies mainly twisting moment. P201-18 THE EFFECT OF PERPENDICULARITY ERROR ON STRESS CONCENTRATION FOR CARBON FIBER REINFORCED PLASTIC Xueshu Liu (Dalian University of Technology), Hang Gao (Dalian University of Technology) The perpendicularity error of bolt-hole affects stress distribution around the bolt-hole and when it increases up to 4 degree stresses in the region surrounding the bolt-hole may increase 20 times.
Stage 2
Stage 3
Stage 4
Stage 5
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
Mini Oral Session II
P202-17 CRUSHING ANALYSIS AND CRASHWORTHINESS OPTIMIZATION DESIGN OF REINFORCED REGULAR HEXAGON HONEYCOMB SANDWICH PANEL He Qiang (Nanjin University of science and technology)
P203-17 A STUDY ON THE OPTIMAL DESIGN OF COMPOSITE ROTOR BLADE CROSS-SECTION USING MICRO GENETIC ALGORITHM You-Jin Won (Korea Aerospace Research Institute), SooYong Lee (Korea Aerospace University)
This paper introduces single-rib reinforced regular hexagon HSP (R1-HSP) and double-rib reinforced regular hexagon HSP (R2-HSP). The mechanical characteristics of these three structures are first inve P202-18 EMPIRICAL APPROACH OF ITERATIVE INSERT SHAPE OPTIMIZATION IN THIN SKINNED FRPSANDWICH PANEL JOINTS Johannes Wolff (Insitute of Composite Structures and Adaptive Systems), Fritz Felix Trimpe (Insitute of Composite Structures and Adaptive Systems) Analytical results, using an euqation provided by ECSS, predicting the first failure load level of sandwich insert connections using the core load path are compared to test data.
P205-17 DEVELOPMENT OF SHAPE MORPHING KIRIGAMI HONEYCOMBS AND ACTUATION METHODS Robin Neville (University of Bristol), Fabrizio Scarpa (University of Bristol)
P203-18 LATTICE TRUSS CORE SANDWICH STRUCTURES WITH AL LATTICE TRUSS CORE AND CFRP COMPOSITE FACESHEETS UNDER IMPACT LOADS Bing Wang (Harbin Institute of Technology), shaowei zhu (Harbin Institute of Technology), Guoqi zhang (Beijing Satellite Manufacturing Factory)
P204-18 EFFECTS OF DIFFERENT TESTING CONDITIONS ON TENSILE PROPERTIES OF CARBON FIBER MULTIFILAMENT Junlin Chen (Beihang University), Yan Zhao (Beihang University), Ye Li (Beihang University), Zhe Yang (Beihang University), Jianwei Hao (Aviation Industry Corporation of China)
P205-18 SUBWAVELENGTH WAVE PROPAGATION CONTROL BY USING ACTIVE ELASTIC METAMATERIALS Guoliang Huang (University of Missouri), Yangyang Chen (University of Missouri)
P204-19 GRP BOGIE CHARACTERISTICS EVALUATED BY EXPERIMENTAL METHODS Jan Chvojan (VZU Plzen), Jaroslav Vaclavik (VZU Plzen), Miloslav Kepka (University of West Bohemia), Rayner Mayer (Sciotech Projects)
P205-19 A STUDY ON THE DURABILITY OF GECKOLIKE PDMS MICRO-STRUCTURES BY METAL COATINGS Gyu-He Kim (Andong National University), Tae-Chang Ahn (Andong National University), Hui Yun Hwang (Andong National University)
The mechanical response of pyramidal truss core sandwich structures consisting of carbon fiber reinforced polymer (CFRP) facesheets and aluminum alloy lattice truss cores
P201-19 EFFECTS OF PHASE SHIFT ON THE RESPONSE P202-19 INDENTATION MODELS AND FAILURE MODE OF LAMINATED WOVEN COMPOSITES MAP FOR CIRCULAR COMPOSITE SANDWICH PLATES Sam Huang (Suny at Stony Brook) Sridhar Idapalapati (Nanyang Technological University), Rajaneesh Anantharaju (Nanyang Technological This research focuses on responses of 64 woven lamiUniversity) nated composites whose phase shift in microstructure is different under uniaxial compression and biaxial The failure response of clamped circular sandwich plates compression. under localised central loading is investigated. The competing failure modes, failure mode map was created as function of geometry, properties.
P203-19 A STUDY OF THE THERMAL BUCKLING BEHAVIOR OF A COMPOSITE PLATE USING THE DIGITAL IMAGE CORRELATION TECHNIQUE AND FINITE ELEMENT ANALYSIS Nam Seo Goo (Konkuk University)
P201-20 ANALYTICAL, EXPERIMENTAL AND NUMERICAL APPROACH OF STORAGE AND LOSS MODULI OF FIBRE REINFORCED EPOXY COMPOSITES Efstathios Theotokoglou (National Technical university of Athens), Ioannis Giannopoulos (Cranfield University), Emilios Sideridis (National Technical university of Athens)
P203-20 COMPOSITE BEAM WITH CELL STRUCTURE FOR HIGH STIFFNESS SHORT BEAM APPLICATIONS Zdeněk Pošvář (Czech Technical University in Prague), Milan Růžička (Czech Technical University in Prague)
In the study presented in this article the Dynamic Mechanical Analysis of micro-mechanically modelled unidirectional fibre reinforced composites was investigated numerically by Finite Element Method.
P202-20 EXPERIMENTAL-THEORETICAL ANALYSIS OF MECHANICAL PROPERTIES OF PERFORATED COMPOSITE SANDWICH PANELS FOR AIRCRAFT ENGINE NACELLE Aleksandr Anoshkin (Perm National Research Polytechnic University), Valerii Zuiko (Perm National Research Polytechnic University), Anna Tchugaynova (Perm National Research Polytechnic University), Evgeniya Shustova (Perm National Research Polytechnic University) The work is dedicated to analysis of mechanical properties of composite sandwich panels. The influence of perforation on mechanical properties of fiberglass panels was studied.
32
P204-17 INNOVATIVE HYDROXYAPATITES, COLLAGEN AND CHITOSAN SCAFFOLDS FOR ENHANCED ADHESION, GROWTH AND BIOACTIVITY OF HUMAN OSTEOBLASTS IN VITRO Gheorghe Tomoaia (Iuliu Hatieganu University of Medicine and Pharmacy), Andrada Tomoaia-Cotisel In this study, optimal design of composite rotor blade (University of Utah. School of Medicine), Aurora Mocanu cross-section was carried out to draw design variables (Babes-Bolyai University of Cluj-Napoca), Maria Tomoaiafor layout design of blade cross-section minimizing blade Cotisel (Babes-Bolyai University of Cluj-Napoca) mass in early stage of design.
This work presents techniques for the design and manufacture of morphing honeycombs using Kirigami (origami + cutting). A method is presented to predict the shape morphing behaviour of the honeycombs.
Elastic metamaterials have been extensively investigated due to their unique abilities on controlling propagation of Effects of different sample preparation and testing condi- subwavelength elastic waves. One of the most interesttions on tensile properties of carbon fiber yarn have been ing properties is the generati investigated based on some parameters.
Testing methods have been developed and described in the paper for the bogie dynamics characteristics investigation in a laboratory conditional including drop test, sweep test and track profile test.
In this study, we suggested a metal coating method to improve durability of Gecko-like dry adhesives, and proved that metal coating can improve more than 30% by experimental works.
33
Scientific programme Monday 20 July Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Opening Ceremony Plenary: Integration of manufacturing and failure analyses for sustainable design of composites Ramesh Talreja, Texas A&M University, USA Coffee in the Exhibition 1101 Processing 1102 Nano Composites 1 1103 Multifunctional 1104 Fatigue 1 1105 Structural Analysis Manufacturing Technology 1 Composites - Sensing and and Optimization 1 Actuation 1 1102-1 ALL 1103-1 MICROMECHANICAL 1104-1 A 1105-1 BUCKLING 10:15 1101-1 ULTRASONIC WELDING OF POLYPROPYLENE MODELING OF SMART MICROMECHANICAL ANALYSIS, DESIGN AND THERMOPLASTIC NANOCOMPOSITE WITH MAGNETOELECTRIC APPROACH TO STUDY THE OPTIMISATION OF VARIABLE COMPOSITES WITH FLAT WELL-ALIGNED AND WELL COMPOSITE PLATES DAMAGE EVOLUTION OF STIFFNESS SANDWICH ENERGY DIRECTORS: ORIENTED ELECTROSPUN Alexander Kalamkarov EPOXY BASED COMPOSITE PANELS INFLUENCE OF THE POLYPROPYLENE (Dalhousie University), MATERIALS UNDER FATIGUE Broderick Coburn (University THICKNESS OF THE ENERGY NANOFIBERS Demetra Hadjiloizi (Cyprus LOADING of Bristol), Paul Weaver DIRECTOR ON THE WELDING Takashi Nishino (Kobe University of Technology), Daniel Krause (German (University of Bristol) PROCESS University), Yuji Asahina (Kobe Chariklia Metti (Cyprus Aerospace Center (DLR)) Genevieve Palardy (Delft University), Chizuru Hongo University of Technology), A Ritz approach semi-anaUniversity of Technology), (Kobe University) Pedro Pacheco (CEFET/ Using the hysteresis energy lytical model is developed Irene Fernandez Villegas (Delft RJ), Marcelo Savi (COPPEas a failure criterion, the for the buckling analysis of University of Technology) All-it.PP nanocomposite, com- Universidade Federal do Rio transverse crack initiation fibre-steered sandwich panposed of it.PP matrix and it.PP de Janeiro), Tasos Georgiades and growth is modelled on a els. Results from parametric This paper presents a detailed drawn nanofibers by electro- (Cyprus University of micro-scale. Test data for neat and optimisation studies are experimental examination of spinning, was found to show Technology) resin is obtained to calibrate presented and discussed. the influence of the thickness superior optical transparency the model. of flat energy directors on the and mechanical properties. ultrasonic welding process for carbon fibre/polyetherimide composites. 8:30 8:50 9:45 10:15
10:35 1101-2 INTERDEPENDENCY OF WELDING SPEED AND DISTANCE BETWEEN COIL AND ROLLER DURING INDUCTION WELDING OF METAL AND GLASS FIBER REINFORCED POLYAMIDE 6 Martina Hümbert (Institut für Verbundwerkstoffe), Peter Mitschang (Institut für Verbundwerkstoffe)
1102-2 INTERLAMINAR TOUGHENING OF RESIN TRANSFER MOULDED GLASS FIBRE EPOXY LAMINATES BY POLYCAPROLACTONE ELECTROSPUN NANOFIBRES Sam van der Heijden (Ghent University), Lode Daelemans (Ghent University), Bert De Schoenmaker (Ghent University), Ives De Baere (Ghent University), Hubert This study investigates the Rahier (vrije universiteit interdependency of welding brussel), Wim Van Paepegem speed and distance between (Ghent University), Karen De coil and roller during continu- Clerck (Ghent University) ous induction welding of glass fiber reinforced polyamide 6 Almost 100% improvement in and steel /aluminum. mode I interlaminar fracture toughness could be achieved by electrospinning the PCL nanofibres on both sides of the glass fibre mats prior to impregnation.
34
1103-2 INTERFACIAL EVALUATION OF CARBON REINFORCED NANOCOMPOSITES USING ELECTRICAL RESISTANCE MEASUREMENT WITH WETTING TESTS Dong-Jun Kwon (Gyeongsang National University), Zuo-Jia Wang (Gyeongsang National University), Pyeong-Su Shin (Gyeongsang National University), Jin-Yeong Choi (Gyeongsang National University), Lawrence DeVries (The University of Utah), Joung-Man Park (Gyeongsang National University) Ultimately, it was demonstrated that mechanical property related to interfacial properties might potentially be predicted by electrical resistance measurement using empirical formulas and correlations
1104-2 FATIGUE OF OUTOF-PLANE FIBRE WAVINESS DEFECTS: EXPERIMENTAL AND NUMERICAL STUDY Supratik Mukhopadhyay (University of Bristol), Stephen Hallett (University of Bristol) In this work, failure of laminates containing embedded fibre waviness or ‘wrinkle’ defect is investigated in tension-tension fatigue loading using both an experimental and numerical approach.
1105-2 ULTIMATE STRENGTH PREDICTIONS OF IMPERFECT COMPOSITE PLATES Qiao Jie Yang (University of Oslo), Brian Hayman (University of Oslo)
Meeting room 18
Meeting room 19
Meeting room 20
Meeting room 17
Meeting room 16
1106 Processing Preforming Technologies
1107 Process Modelling 1
1108 Biocomposites 1
1109 Interfaces and Interphases 1
1110 Ceramic Matrix Composites
1106-1 THERMAL AND CURE KINETICS MODELING OF THERMOSET LAMINATES DURING AND AFTER THE COMBINED AUTOMATED TAPE LAYING AND AUTOCLAVE PROCESS Maria Skandali (Delft University of Technology), Kaspar Jansen (Delft University of Technology), Sotiris Koussios (Delft University of Technology), Jos Sinke (Delft University of Technology)
1107-1 SIMULATION OF THE THERMO-STAMPING PROCESS Kévin Le Meur (INSA Lyon)
KEYNOTE
1109-1 QUANTIFICATION OF THE CRACK AREAS OF STABLE AND UNSTABLE CRACK PROPAGATION DURING SINGLE-FIBER PUSH-OUT TESTS PERFORMED ON CERAMIC MATRIX COMPOSITE SAMPLES Wolfgang M. Mueller (University of Augsburg), Judith Moosburger-Will (University of Augsburg), Michael Greisel (University of Augsburg), Siegfried Horn (University of Augsburg)
1110-1 MECHANICAL RESPONSE OF TYPICAL 2D C/SIC BEAMS UNDER DIFFERENT LOADING CASES Chengpeng Yang (northwestern polytechnical university), Bo wang (northwetern polytechnical university), Tao huang (northwestern polytechnical university)
A two-dimensional heat transfer model in a Lagrangian framework for Automated Tape Laying was developed. Stepwise laying down of the tapes, and more than the usual heat are applied on thermoset tapes. 1106-2 FIRST STUDY ON USING HEAVY TOW FIBERS FOR TEXTILE PREFORM PROCESSES IN THE AEROSPACE INDUSTRY Daniel Gizik (Airbus Group Innovations), Christian Metzner (Airbus Group Innovations), Christian Weimer (Airbus Group Innovations), Peter Middendorf (University of Stuttgart)
1108-1 FATIGUE BEHAVIOUR OF WOVEN FLAX/EPOXY COMPOSITES The forming step of the Larry Lessard (McGill thermo-stamping process University), Soroush is simulated. The material’s Asgarinia (McGill University), behaviour is characterised Chanvit Viriyasuthe (McGill experimentally for input data. University), Steven Phillips Simulation results are com(McGill University), Martine pared to manufactured parts. Dubé (Ecole de Technologie Supéieure), Joris Baets (KU Leuven), Aart van Vuure (KU Leuven), Ignaas Verpoest (KU Leuven)
1107-2 MODELING OF HEAT TRANSFER AND UNSATURATED FLOW IN WOVEN FABRICS DURING DIRECT INJECTIONPULTRUSION PROCESS OF THERMOPLASTIC COMPOSITES A simplified, semi-analytical Arthur Babeau (Ecole Centrale method to predict the buckde Nantes), Sébastien Comasling response and ultimate Cardona (Ecole Centrale de strength of FRP laminates is Nantes), Christophe Binetruy used in a parametric study of (Ecole Centrale de Nantes), square and rectangular plates A first investigation on the use Gilles Orange (Solvay) under in-plane compression. of heavy tow carbon fibers for the aerospace industry is In this work, a modeling of presented. Three commercial the thermoplastic pultrusion fibers were selected, spread process is presented. A heat to two areal weights and me- transfer model and a flow chanical tests were done. model are coupled. Data were measured on a pultrusion line to validate the models.
The mechanical responses of two kinds of 2D C/SiC composite beams, I-sections and U-sections under different loading cases are investigated experimentally and Natural fibre flax composites An approach for quantification numerically. and hybrid composites made of the relevant crack area from flax and glass fibres at single-fiber pushout tests are studied. Understanding is presented resulting in a their fatigue performance is more reliable determination critical in order increase their of interfacial properties of fibcurrent use. er-reinforced composites 1109-2 NEW CONTINUOUS 1110-2 INFLUENCE OF FIBER REINFORCED CARBON-FIBER SURFACE THERMOPLASTIC TREATMENT ON THE COMPOSITES: AN ANALYSIS PROPERTIES OF C/C OF INTERFACIAL ADHESION MATERIALS FROM THE MICRO SCALE TO Simon J. A. Haug (University THE MACRO SCALE of Augsburg), Wolfgang Johanna Beguinel (INSA M. Mueller (University of Lyon), Frédéric Lortie Augsburg), Siegfried R. Horn (INSA Lyon), Jean-François (University of Augsburg) Gérard (INSA Lyon), Jérôme Maupetit (CHOMARAT Textiles The influence of carbon fiber Industries), Pierre Gerard surface treatment on fiber (ARKEMA) matrix microstructure and adhesion in carbon fiber Acrylic matrix/fiber interfaces reinforced carbon materials were investigated by con(CFRC) was investigated. sidering microcomposites. The study questions the relationships between wettability, work of adhesion, and practical adhesion at various scales.
Monday 20 July · Scientific
Meeting room 5 Meeting room 6 Meeting room 7 M1 M2 Opening Ceremony Plenary: Integration of manufacturing and failure analyses for sustainable design of composites Ramesh Talreja, Texas A&M University, USA Coffee in the Exhibition 1111 Textile-Based 1112 Graphene, Graphene- 1113 Dynamic Material 1114 Fracture 1115 Fracture and Composites and Fibre Based Composites 1 Behaviour and Damage Damage - Laminate Architecture 1 Micromechanics 1 Scale 1 KEYNOTE 1112-1 EFFECT OF 1113-1 AN INVERSE 1114-1 MICROSCOPIC 1115-1 EFFECTS OF REINFORCEMENT ESTIMATION OF HIGH PROGRESSIVE DAMAGE SPECIMEN WIDTH ON THE 1111-1 FATIGUE WEIGHT FRACTION STRAIN RATE PROPERTIES AND FAILURE ANALYSIS TENSILE STRENGTH OF PERFORMANCE OF AND DISPERSANTS ON OF COMPOSITE MATERIAL OF CARBON-FIBER ALIGNED SHORT-CARBONMICRO-FIBRILLATED MECHANICAL PROPERTIES CONSTITUENTS REINFORCED COMPOSITE FIBER REINFORCED EPOXY CELLULOSE AND RUBBER OF GRAPHENE Stanley Chacko Salem (The UNDER SHEAR LOADING COMPOSITE LAMINATES NANOPARTICLE HYBRID NANOCOMPOSITES University of Nottingham), Geng Han (Beihang Wen-Xue Wang (Kyushu EPOXY RESIN REINFORCED Hsien-Kuang Liu (Feng Chia Arthur Jones (The University University), Zhidong Guan University), Hang Li (Hunan CARBON PLAIN WEAVE University), Yu-Chen Lin of Nottingham), Richard (Beihang University), Mi University), Terutake COMPOSITES (Feng Chia University) Brooks (The University of Zhang (Beihang University), Matsubara (Kyushu Valter Carvelli (Politecnico Nottingham), Mark Jonathan Zhaojie Ji (Beihang University), Dongmei Luo di Milano), Andrea Betti In this paper, GO and RGO Lidgett (EPL Composite University), Shengzhe (Foshan University), Jia (Politecnico di Milano), Toru graphenes are incorporated Solutions Ltd) Li (Beijing), Shanyi Du Xue (Beijing Aeronautical Fujii (Doshisha University) into polyvinyl alcohol and (Beihang University) Science & Technology epoxy matrices as reinThis paper is on inverse Research Institute) This work deals with the forcements to fabricate four estimation of high strain The experimental method effects of hybrid epoxy kinds of nanocomposites rate properties of composite and a unit cell of fiber ran- This study investigates the resins, enhanced with miwith and without dispersant materials constituents using dom distribution are used to size effects of specimen cro-fibrillated cellulose and addition. micro scale finite element analyze the damage initia- width on the tensile testing carboxylated nitrile-butadimodel and numerical opti- tion and evolution process properties of various aligned ene rubber nanoparticles, on misation. of carbon fiber-reinforced short carbon fiber reinforced the fatigue of carbon textile composite under shear epoxy composite laminate. composites. loading. Significant effects are found. 1112-2 ENHANCED DAMPING PROPERTIES OF GRAPHENE/NICKEL FOAM FILLED EPOXY COMPOSITES You Zeng (Institute of Metal Research-Chinese Academy of Sciences), Han Wang (Institute of Metal ResearchChinese Academy of Sciences), Zhe Ying (Institute of Metal Research-Chinese Academy of Sciences), Minghe Fang (Institute of Metal Research-Chinese Academy of Sciences), Hui-Ming Cheng (Institute of Metal Research-Chinese Academy of Sciences)
1113-2 INVESTIGATION OF THE DYNAMIC BEHAVIOUR OF EPOXY REINFORCED NANOSILICA AND MICROPARTICULATE RUBBER COMPOSITES THROUGH ANALYTICALEXPERIMENTAL TRANSFER FUNCTIONS Gabriel Mansour (Aristotle University of Thessaloniki), Konstantinos Tsongas (Aristotle University of Thessaloniki), Dimitrios Tzetzis (International Hellenic University)
1114-2 FAILURE PROPERTIES OF BISMALEIMIDE THERMOSETTING RESINS FOR HIGH PERFORMANCE CARBON FIBRE REINFORCED COMPOSITES Guillaume Fischer (Airbus Group Innovations), Bruno Bresson (UMR CNRS 7615 - ESPCI ParisTech), Matteo Ciccotti (UMR CNRS 7615 ESPCI ParisTech), Jacques Cinquin (Airbus Group Innovations), Frédéric Lortie (UMR CNRS 5223 - INSA de Lyon), Jean-François Gérard An efficient identification (UMR CNRS 5223 - INSA method for modal testing of de Lyon) epoxy reinforced with naGraphene/Ni-foam filled nosilica and CTBN rubber is The effect of several therepoxy composites exhibit demonstrated in this paper, moplastics on the failure much higher flexural modu- through the analytical-exbehaviour of a typical bislus and larger energy dissi- perimental transfer function maleimide resin has been pation than neat epoxy due method. investigated with a time to remarkable Ni reinforceresolved method using AFM ment and rich interfaces of imaging. the nanocomposites
1115-2 PREDICTING THE FAILURE OF POLYMER MATRIX COMPOSITES INCORPORATING THE EFFECTS OF PROCESSING Brent Volk (Air Force Research Laboratory), Michael Braginsky (Air Force Research Laboratory), Ray Coomer (Air Force Research Laboratory), Endel Iarve (Air Force Research Laboratory), David Mollenhauer (Air Force Research Laboratory), Tara Storage (Air Force Research Laboratory)
programme
M3
M4
M5
M6
M7
M8
1116 Fracture and Damage - Delamination 1
1117 Constitutive Models 1
1118 Joints - Design, Manufacturing and Testing 1 KEYNOTE
1119 In-situ MicroMechanical Testing
1120 Applications Offshore and Subsea
1119-1 IN-SITU MONITORING OF COMPOSITE FAILURE BY COMPUTING TOMOGRAPHY AND ACOUSTIC EMISSION Sinan Kalafat (University of Augsburg), AndreeaManuela Zelenyak (University of Augsburg), Markus Sause (University of Augsburg)
1120-1 NUMERICAL SIMULATION OF STATIC MECHANICAL BEHAVIOR OF COMPOSITE WINDBLADE - IMPLICATIONS ON FABRICATION TECHNOLOGIES Monssef DRISSI-HABTI (IFSTTAR), Venkadesh RAMAN (IRT Jules VERNE)
1121 Multifunctional Composites - Energy Storage and Harvesting 1 1121-1 FIBER REINFORCED PIEZOELECTRIC COMPOSITES Christopher C. Bowland (University of Florida), Mohammad H. Malakooti (University of Florida), HyunSik Hwang (University of Florida), Henry A. Sodano (University of Florida)
1116-1 INFLUENCE OF SPAN RATIO ON THE FOUR-POINT BEND END NOTCHED FLEXURE TEST Biao Li (Northwestern Polytechnical University), Yazhi Li (Northwestern Polytechnical University)
1117-1 A GENERAL BEHAVIOR LAW IN ORDER TO MODEL THERMOSET AND THERMOPLASTIC COMPOSITE MATERIALS SUBJECTED TO DYNAMICS LOADS Patrick Rozycki (Ecole Centrale de Nantes), Laurent The inner to outer span Gornet (Ecole Centrale de ratio of four-point bend End Nantes) Notched Flexure has little influence on the determiThe paper deals with a nation of mode II fracture unified behaviour law toughness. The toughness dedicated to the numerical value from natural crack simulations of thermoset should be used. and thermoplastic composite materials under rapid dynamic loadings.
1116-2 INFLUENCE OF REINFORCEMENT DESIGN ON DELAMINATION RESISTANCE & MECHANICAL PROPERTIES OF CFRP/CFRP JOINTS UNDER STATIC & FATIGUE LOADING Michael Jürgens (Airbus Group), Ana Carolina Nogueira (Fraunhofer), Holger Lang (Fraunhofer), Elke Hombergsmeier (Airbus Group), Klaus Drechsler (Technische Universität München)
1117-2 MODELLING THE HYSTERESIS COMPOSITE BEHAVIOR USING AN ELASTO-PLASTO-DAMAGE MODEL WITH FRACTIONAL DERIVATIVE Alina Krasnobrizha (Ecole Centrale de Nantes), Patrick Rozycki (Ecole Centrale de Nantes), Laurent Gornet (Ecole Centrale de Nantes), Pascal Cosson (Ecole Centrale de Nantes)
The proposed model is dedicated to composites material and composed of A methodology used to Multidimensional metallic an elasto-plastic damage incorporate the effects (i.e. reinforcements significantly behavior law which is residual stresses) due to increase mode II fracture strain rate responsive and processing on the resulting toughness of CFRP joints fractional derivatives to repstrength of organic matrix and laminates by milli- and resent hysteretic loops. composites is demonstrated. nanoscaled mechanical interlocking and plastic shear deformation.
1118-1 NUMERICAL AND EXPERIMENTAL INVESTIGATION OF CFRP TO PERFORATED STEEL JOITNS Evangelos Ioannis Avgoulas (University of Cambridge), Michael Sutcliffe (University of Cambridge) Biomimetic inspired co-infused perforated steel to CFRP joint configurations that offer a transitional zone of stiffness in the joint site were numerically and experimentally investigated.
Carbon/Epoxy specimens are loaded in-situ in a commercial computing tomography device. Acoustic Emission is simultaneously recorded and the detected signals are compared to model predictions.
1119-2 DYNAMIC VISUALIZATION OF FIBER PULL-OUT BY X-RAY PCI Matthew Hudspeth (Purdue University), Wayne Chen (Purdue University)
Wind turbine blade was simulated to optimise the layup and thickness. The adhesive material used to join the blade edges was included in the numerical study.
Multifunctional carbon fiber composites are fabricated utilizing the piezoelectric property of nanostructured zinc oxide and barium titanate deposited on Kevlar and carbon fiber fabrics.
1120-2 ANALYSIS OF BENDING AND TENSILE BEHAVIOR OF CFRP STRANDED AND SPIRAL CABLES USING A NUMERIC MODEL Felipe Luz (Federal University of Rio Grande do Sul), Laís Silva (Federal University of Rio Grande do Sul), Carlos Cimini (Federal University of Minas Gerais), Sandro Amico (Federal University of Rio Grande do Sul)
1121-2 REALISATION OF STRUCTURAL BATTERY COMPOSITE MATERIALS Leif Asp (Swerea SICOMP), Simon Leijonmarck (Swerea SICOMP), Tony Carlson (Swerea SICOMP), Göran Lindbergh (KTH) The paper presents details on the development of carbon fibre structural battery composite materials, and their devices, and the rationale for developing them.
In this study, a CFRP Spiral composite cable was analyzed in order to evaluate their bending and tensile behavior as compared to a similar Stranded composite cable.
35
Scientific programme · Monday 20 July Congress Hall A 10:55 1101-3 INFLUENCE OF TEMPERATURE ON STRENGTH AND FAILURE MECHANISMS OF RESISTANCE WELDED THERMOPLASTIC COMPOSITES JOINTS Nikos Koutras (TU Delft), Irene Fernandez Villegas (TU Delft), Rinze Benedictus (TU Delft)
Auditorium 10 1103-3 DESIGN AND CHARACTERIZATION OF PRESSURE, TEMPERATURE AND MOISTURE SENSORS BASED ON MWCNTCOMPOSITES Sergei Sapozhnikov (South Ural State University), Ruslan Abdrakhimov (South Ural State University), Alexander A unified model incorporating D’yakonov (South-Urals State Exposure of resistance weld- five factors (Orowan strength- University) ed thermoplastic composites ening, load bearing, CTE joints at various temperatures mismatch, grain size, and po- There were developed up to 150°C result in strength rosity) is developed to predict MWCNT-composite sensors reduction and changes in the yield strength of metal with epoxy, PVA, rubber and failure mechanisms. matrix nanocomposites. glass matrices for direct measurement of external pressure, temperature and moisture changing with use of TAUNIT as nanofiller.
11:15 1101-4 NUMERICAL SIMULATION BASED PROCESS DEVELOPMENT OF THE NOVEL THERMOCLINCHING TECHNOLOGY FOR TEXTILE REINFORCED THERMOPLASTICS Maik Gude (Technische Universität Dresden), Christian Vogel (Technische Universität Dresden), Andreas Freund (Technische Universität Dresden) Based on a developed process simulation concept a numerical parameter study is carried out to support the experimental studies of the specific deformation phenomena in the thermoclinching joining zone
36
Auditorium 15 1102-3 A UNIFIED MODEL FOR THE PREDICTION OF YIELD STRENGTH IN PARTICULATE-REINFORCED METAL MATRIX NANOCOMPOSITES Foisal Mirza (Ryerson University), Daolun Chen (Ryerson University)
1102-4 HIGH TEMPERATURE HYBRID COMPOSITES FOR THERMAL BARRIER APPLICATIONS Luis C. Herrera-Ramirez (IMDEA Materials Institute), Juan C. Fernandez (Universidad Politecnica Madrid), Roberto Guzman De Villoria (IMDEA Materials Institute)
1103-4 3D PRINTING OF CONDUCTIVE NANOCOMPOSITES FOR LIQUID SENSOR APPLICATION Kambiz Chizari (École Polytechnique de Montreal), Anil Raj Ravindran (École Polytechnique de Montreal), Daniel Therriault (École Polytechnique de Montreal)
In order to improve the thermal and electrical properties of a polymeric matrix, hollow glass microspheres and carbon nanotubes-hollow glass microspheres hybrids were added.
3D printing of conductive nanocomposite was used for investigation of the influence of structural parameters in scaffold configurations for their application as liquid sensors.
Auditorium 11 1104-3 THE EFFECT OF FIBER WAVINESS AS MANUFACTURING DEFECT ON THE FATIGUE LIFE OF LAMINATED CFRP Susanne Hörrmann (Johannes Kepler University), Christoph Viechtbauer (Johannes Kepler University), Adi Adumitroaie (Johannes Kepler University), Martin Schagerl (Johannes Kepler University)
Meeting room 18 1106-3 REDUCING MANUFACTURING COSTS BY DIRECT ROVING PLACEMENT Yannis Grohmann (German Aerospace Center (DLR e.V.)), Niels Stoffers (German Aerospace Center (DLR e.V.)), Alexandra Kühn (German Aerospace Center (DLR e.V.)), Thorsten Mahrholz (German Aerospace Center (DLR e.V.)), Stefan Schmidt (German Aerospace Center (DLR Damage initiation and proAn efficient 1D beam finite e.V.)), Felix Kruse (German gression of CFRP specimens element considering coupling Aerospace Center (DLR e.V.)) with waviness out-of-plane between different deformaare experimentally and tion modes is proposed for The DRP technology lowers numerically investigated, buckling and vibration of thin- manufacturing costs for loaded in axial C-C and T-C walled laminated composite dry fiber preforms. This and considering the geometry beams having open/closed can be achieved by directly influence. section. processing raw fiber material combined with an online binder application for the fiber fixation.
1104-4 EFFECT OF STRESS RATIO ON FATIGUE CHARACTERISTICS IN THE OUT-OF-PLANE DIRECTION OF THICK CFRP LAMINATES WITH TOUGHENED INTERLAMINAR Atsushi Hosoi (Waseda University), Shigeyoshi Sakuma (Waseda University), Yuzo Fujita (Toray IndustriesInc.), Ichiro Taketa (Toray Industries-Inc.), Hiroyuki Kawada (Waseda University) The effect of the stress ratio on fatigue characteristics in the out-of-plane direction of thick CFRP laminates with toughened interlaminar layers was evaluated quantitatively.
Auditorium 12 1105-3 BUCKLING AND VIBRATION CHARACTERISTICS OF THIN-WALLED LAMINATED COMPOSITE BEAMS HAVING OPEN AND CLOSED SECTIONS Arash Asadi (University of Adelaide), Abdul Hamid Sheikh (University of Adelaide), Ole Thybo Thomsen (University of Southampton)
1105-4 OPTIMIZATION OF NON-SYMMETRIC COMPOSITE PANELS USING FAST ANALYSIS TECHNIQUES Riccardo Vescovini (Politecnico di Milano), Chiara Bisagni (Politecnico di Milano) A semi-analytical approach is presented for the optimization of laminated panels with nonsymmetric lay-ups with buckling, postbuckling and eigenfrequencies requirements.
1106-4 IMPROVEMENT OF FIBRE PLACEMENT ACCURACY IN CONTINUOUS TOW SHEARING PROCESS Byung Chul Kim (University of Bristol), Evangelos Zympeloudis (University of Bristol)
Meeting room 19 1107-3 NON ISOTHERMAL REACTIVE FLOW MODELLING IN PULTRUSION PROCESS LOOKING TOWARD VOIDS PREDICTION Pierpaolo Carlone (University of Salerno), Gaetano Palazzo (University of Salerno) An impregnation model for pultrusion, based on a non-homogeneous non-isothermal/reactive multiphase approach, is reported. Resin flow and pressure at die inlet are inferred, aiming to void prediction.
1107-4 NUMERICAL INVESTIGATION ON THE STRESS DISTRIBUTION FOR HOLLOW COMPOSITE STRUCTURES DUE TO OVERMOLD-ING Alexander Liebsch (Institute of Lightweight Design and Polymer Technologies), Continuous Tow Shearing Andreas Freund (Institute (CTS) is a new fibre placeof Lightweight Design and ment technology that can Polymer Technologies), steer the tow without causing Robert Kupfer (Institute of the defects. In this work, the Lightweight Design and method to improve its layup Polymer Technologies), Maik accuracy was developed and Gude (Institute of Lightweight tested. Design and Polymer Technologies)
Meeting room 20 1108-2 RELATIONSHIP BETWEEN FIBER ORIENTATION ANGLE AND STATIC BENDING CHARACTERISTIC OF LAMINATED BAMBOO PLATES Kazufumi UDA (Kanagawa Institute of Technology)
Meeting room 17 1109-3 IMPROVING INTERFACIAL STRESS TRANSFER IN GLASS FIBER POLYMER COMPOSITES THROUGH GRAPHITE NANOPLATELETS Alessandro Pegoretti (University of Trento), Diego Pedrazzoli (University of Trento), Kyriaki Kalaitzidou An evaluation of the bending (Georgia Institute of characteristics of bamboo-fib- Technology) er-laminated plates with fiber orientation angles at 15° This study focuses on the efintervals in the range from 0° fects of graphite nanoplatelets to 90°. The applications to an dispersed in polymer comEV were demonstrated. posites reinforced with short glass fibers. As matrices, both isotactic polypropylene and an epoxy resin, were used.
1108-3 MECHANICAL PERFORMANCE AND FRACTURE CHARACTERISTIC OF BAMBOO FIBER REINFORCED POLYETHYLENE BIOCOMPOSITES PREPARED BY ROTATIONAL MOLDING Supaphorn Thumsorn (Rajamangala University of Technology Thanyaburi), Jitlada Boonlertsamut (Rajamangala University of Technology Thanyaburi), Thanadol Petchnoi (Rajamangala University of Technology Thanyaburi), Saowaluk Boonmawieng (Rajamangala University of Technology Thanyaburi), Narongchai O-Charoen (Rajamangala University of Technology Thanyaburi), Hiroyuki Hamada (Kyoto Institute of Technology)
1109-4 LASER SHOCK TEST APPLICATION FOR MECHANICAL CHARACTERISATION OF FIBRE/MATRIX INTERFACE Amélie Perrier (Institut PprimeCNRS-ISAE-ENSMA-Université de Poitiers UPR 3346), Romain Ecault (Institut Pprime-CNRSISAE-ENSMA-Université de Poitiers UPR 3346), Fabienne Touchard (Institut PprimeCNRS-ISAE-ENSMA-Université de Poitiers UPR 3346), Maria Vidal Urriza (Institut PprimeCNRS-ISAE-ENSMA-Université de Poitiers UPR 3346), Jacques Baillargeat (Institut PprimeCNRS-ISAE-ENSMA-Université In the present work, a simde Poitiers UPR 3346), ulation method to analyze Laurence Chocinski-Arnault the deformation behavior (Institut Pprime-CNRS-ISAEof a hollow profile and the ENSMA-Université de Poitiers supporting core during the UPR 3346), Michel Boustie injection molding process was (Institut Pprime-CNRS-ISAEapproved. LLDPE/bamboo fiber compos- ENSMA-Université de Poitiers ites were made by rotational UPR 3346) molding. LLDPE-g-MA was used to improve adhesion in The aim of this work is to the composites. BF enhanced study the ability of laser shock tensile modulus, hardness technique to characterise fibre/ and crystallinity of the com- matrix adhesion in composites posites. and also the influence of water ageing on this interface.
Meeting room 16 1110-3 ELECTRO DISCHARGE MACHINABLE ALUMINABASED NANOCOMPOSITES Luis Antonio Diaz Rodriguez (Nanomaterials and Nanotechnology Research Center CINN-CSIC-UNIOVIPA), Anna Okunkova (State University of Technology STANKIN), Washintong Solis (State University of Technology STANKIN), Pavel Peretyagin (State University of Technology STANKIN), Francisco José Gotor (Instituto de Ciencia de Materiales de Sevilla ICMS-US), Ramón Torrecillas (Nanomaterials and Nanotechnology Research Center CINN-CSIC-UNIOVIPA), Ramón Torrecillas (State University of Technology STANKIN) EDM ceramic composites consisting of a base non-conductive ceramic component such Al2O3, and electro-conductive ceramic nanoparticles such TiC, TiNC, NbNC, TaNC, and also SiC whiskers. 1110-4 AN IMPROVED SHEAR-LAG MODEL FOR NEEDLE-PUNCHED CARBON/ CARBON COMPOSITE LAMINATES Yongzhen Jia (Huazhong University of Science and Technology), Dunming Liao (Huazhong University of Science and Technology), Hong Cui (Xi’an Aerospace Composites Research Institute), Alin Ji (Xi’an Aerospace Composites Research Institute), Xia Bai (Xi’an Aerospace Composites Research Institute) Based on the finite difference method and the shear-lag theory, this paper analyzed the stress concentrations in a needle-punched C/C composite laminate.
Monday 20 July · Scientific Meeting room 5 1111-2 A STUDY ON THE MECHANICAL PROPERTIES AND FORMABILITY PERFORMANCE OF STRETCHBROKEN CARBON FIBER REINFORCED THERMOPLASTIC COMPOSITES Patcharat Wongsriraksa (Kanazawa Institute of Technology), Mitsugu Kimizu (Industrial Research Institute of Ishikawa), Kiyoshi Uzawa (Kanazawa Institute of Technology), Isao Kimpara (Kanazawa Institute of Technology) The purpose of this research is to study the effect of stretch-broken carbon fiber on mechanical properties and formability performance of the composites made with SBCF compared to CCF.
1111-3 COMPARISON OF C-PLY SP (THIN PLY) WITH WOVEN FABRIC AND UD PERFORMANCES Vicky Singery (CHOMARAT Textiles Industries), Thomas Roure (CHOMARAT Textiles Industries), Philippe Sanial (CHOMARAT Textiles Industries), Jean-François Osselin (Université de Haute Alsace), Jean-Yves Drean (Université de Haute Alsace) Investigation of C-Ply™ performances and comparison with two different kinds of textile reinforcements : one woven fabric and one unidirectional tape already qualified for Aerospace applications.
Meeting room 6 1112-3 EFFECT OF GRAPHENE NANOPLATELETS FEATURES ON CURE KINETICS OF BENZOXAZINE COMPOSITES Vanessa Garcia (FIDAMC,Getafe (Madrid), Spain) María R. Gude (FIDAMC,Getafe (Madrid),Spain), Alejandro Ureña (Department of Applied Mathematics, Materials Science and Engineering and Electronics Technology, Universidad Rey), Juan Carlos (Móstoles (Madrid), Spain)
Meeting room 7 1113-3 CHARACTERISATION OF E-GLASS/VINYLESTER COMPOSITES SUBJECTED TO IN-PLANE AND OUT-OFPLANE HIGH STRAIN RATE COMPRESSIVE LOADING: EXPERIMENTAL DATA AND NUMERICAL SIMULATION Jamal Arbaoui (ENSTA Bretagne), Mostapha Tarfaoui (ENSTA Bretagne), Aboulghit El Malki (ENSTA Bretagne) This paper presents the in-plane and out-of-plane compression behavior of an E-glass fiber reinforced vinylester composite, which was tested in Split Hopkinson Pressure Bar, and modeled with Abaqus.
1113-4 NUMERICAL SIMULATION OF TRIAXIAL BRAIDED TEXTILE UNDER BALLISTIC IMPACT BASED ON MESO-SCALE MODELING METHODS Lulu Liu (Nanjing University of Aeronautics and Astronautics), Wei Chen (Nanjing University of Aeronautics and Astronautics), Minghua He (Tsinghua University), Gang Luo (Nanjing University of Aeronautics and Astronautics), Zhenhua Zhao (Nanjing University of Aeronautics and Astronautics) meso-scale model methods based on yarn architecture of triaxial braided composites were employed to investigate its dynamic response, failure modes and energy absorption in LS-DYNA.
M1 1114-3 MICROMECHANICAL MODELLING OF NONHOMOGENOUS MATERIALS BY MESHLESS METHODS Nelson Muthu (IIT Bombay), Brian Falzon (Queen’s University Belfast), Surjya Maiti (IIT Bombay), Wenyi Yan (Monash University)
M2 1115-3 IMPACT DAMAGE EVALUATION AND REPAIR TECHNIQUE OF COMPOSITE LAMINATE FOR STRUCTURAL DESIGN OF SMALL SCALE AIRCRAFT Hyunbum Park (Howon University)
The element-free Galerkin (EFG) method is used to investigate the micromechanics of crack propagation in composite material. Two approaches for representing the bi-material interface are examined.
1114-4 STRESS CONCENTRATION FACTOR OF MATRIX IN COMPOSITE UNDER TRANSVERSE LOAD Zheng-Ming Huang (Tongji University), Li-Min Xin (Tongji University)
1115-4 DISCRETE DAMAGE MODELING IN LAMINATED COMPOSITES UNDER FATIGUE LOADING Endel Iarve (University of Dayton Research Institute), Kevin Hoos (University of Dayton Research Institute), Closed-form formulae for David Mollenhauer (Air stress concentration factors Force Research Laboratory) of the matrix in a composite subjected to transverse The Discrete Damage loads are obtained, which Modeling method was are essential for microme- extended for fatigue loading chanical strength prediction simulation. Delamination of it and matrix cracking extent in open laminates was predicted and showed good comparison with experiment.
M3 1116-3 THE INFLUENCE OF MECHANICAL TEST PARAMETERS ON THE OUTCOME OF THE END NOTCH FLEXURE TEST FOR MODE II FRACTURE TOUGHNESS. Ives De Baere (Ghent University), Stefan Jacques (Ghent University), Wim Van Paepegem (Ghent University), Joris Degrieck (Ghent University) A mainly numerical evaluation of some experimental parameters, influencing the outcome of the end notch flexure test for the determination of the Mode II fracture toughness.
1116-4 EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE FRACTURE PROPERTIES OF NANO-MODIFIED COMPOSITES Ali Naem S Alamry (UNSW), B. Gangadhara Prusty (UNSW), S Natarajan (Indian Institute of Technology), Sri Bandyopadhyay (UNSW) This paper presents an experimental and a numerical investigation of fracture resistance of nano-modified composites.The MWCNTs were dispersed by a novel dispersion technique developed in-house.
M4 1117-3 AN ELASTOPLASTIC MODEL TO PREDICT PERMANENT INDENTATION DUE TO IMPACT AND QUASISTATIC INDENTATION ON COMPOSITE LAMINATES Zhaojie Ji (Beihang University), Zhidong Guan (Beihang University), Zengshan Li (Beihang University), Wei He (Beihang University), Geng Han (Beihang University), Tianya Bian (Beihang University) a finite element model based on an anisotropic elasto-plastic theory was established to capture permanent indentations on composite laminates under low velocity impact and quasi-static indentation.
M5 1118-2 PERFORMANCE OF VARIOUS DESIGNS OF HYBRID LOOP-LOADED CFRP-TITANIUM STRAPS Holger Büttemeyer (Faserinstitut Bremen e.V.), Patrick Schiebel (Faserinstitut Bremen e.V.), Axel S. Herrmann (Universität Bremen) Investigation of hybrid straps with different flange designs, varying in radius and the quantity of the loops. The influence on the tensile strength depending on these designs has been tested.
M6 1119-3 IN-SITU EXPERIMENTAL CHARACTERIZATION OF INTERFACIAL TOUGHNESS OF ALUMINUM THIN FILMS ON POLYIMIDE SUBSTRATES Emanuele Cattarinuzzi (Politecnico di Milano), Riccardo Lucchini (Politecnico di Milano), Dario Gastaldi (Politecnico di Milano), Pasquale Vena (Politecnico di Milano), Leandro Lorenzelli (Fondazione Bruno Kessler), Johan P. M. Hoefnagels (Technical University of Eindhoven)
programme
M7 1120-3 THERMOPLASTIC COMPOSITES FOR UNDERWATER APPLICATIONS Mael Arhant (Ifremer), Peter Davies (Ifremer), Christian Burtin (Ecole Centrale de Nantes), Christophe Briançon (CETIM) Carbon fibre reinforced polyamide thermoplastic composites have been tested in compression before and after seawater aging. Implosion tests were performed and compared to carbon/epoxy tube results.
The adhesion of Aluminum thin films on Polyimide substrates was measured by means of peel tests. In-situ light microscopy of the peel front enabled comprehensive interpretation of the peel force trend
1118-3 EXPERIMENTAL INVESTIGATION OF MECHANICAL FASTENERS REGARDING THEIR INFLUENCE ON CRACK GROWTH IN ADHESIVELY BONDED CRFP-JOINTS SUBJECTED TO FATIGUE LOADING Ronny Sachse (Institut of Aircraft Design), Anthony Pickett (Institut of Aircraft Design), Wolfgang Adebahr (Institut für Kunststofftechnik), Moritz Käß (Institut of Aircraft Design), Peter Middendorf (Institut of Aircraft Design) The capability of different fasteners to slow down and arrest crack growth in adhesively bonded CFRPjoints has been shown and associated crack arresting mechanisms have been identified.
1119-4 STRAIN RATE DEPENDENT FAILURE OF GLASS/ EPOXY INTERFACES AT NANO-MICROSCALE VIA NANOIMPACT EXPERIMENTS Vikas Tomar (Purdue University West Lafayette), Devendra Verma (Purdue University West Lafayette)
1120-4 THERMOPLASTIC COMPOSITE PIPE; OPERATIONAL EXPERIENCE IN DEEPWATER AND TECHNOLOGY QUALIFICATION APPROACH Bart Steuten (Airborne Oil & Gas), Marcus Kremers (Airborne Oil & Gas), Henk de Boer (Airborne Oil & Gas), Jens de Kanter (Airborne Oil & Gas)
M8 1121-3 STRENGTH OF THIN SOLID POLYMER ELECTROLYTE COATINGS AND THE COATED CARBON FIBRES Simon Leijonmarck (Swerea SICOMP), Andrejs Pupurs (Luleå University of Technology), Leif Asp (Swerea SICOMP), Göran Lindbergh (KTH), Janis Varna (Luleå University of Technology) Polymer coated carbon fibres for use in structural batteries were investigated with respect to the durability of the polymer after mechanical cycling. No failures in the coatings could be found.
1121-4 MOLECULAR DYNAMICS MODELLING OF STRUCTURAL BATTERY COMPONENTS Osvalds Verners (TU Delft), Adri van Duin (Penn State University), Marnix Wagemaker (TU Delft), Angelo Simone (TU Delft)
A crosslinked solid polymer electrolyte reactive moThe mechanical strength lecular dynamics study of of metallic interfaces is A verification of the TCP pressure equilibrium, plasticharacterized at strain rates residual life during and after cizer and anion effects on Li approaching 400 s-1. The severe offshore usage for ion diffusivity and transport JC model is fitted to show pipeline pre-commissioning, mechanisms is presented. the effect of loading and confirming the suitability of interface structural inhoTCP for future use in other mogeneity. oilfield applications.
37
Scientific programme · Monday 20 July Congress Hall A 11:35 1101-5 THE INFLUENCE OF MOISTURE CONTENT ON THE WELD SEAM QUALITY FOR LASER WELDED THERMOPLASTIC COMPOSITES Verena Wippo (Laser Zentrum Hannover e.V.), Peter Jaeschke (Laser Zentrum Hannover e.V.), Oliver Suttmann (Laser Zentrum Hannover e.V.), Ludger Overmeyer (Laser Zentrum Hannover e.V.)
Auditorium 15 1102-5 MORPHOLOGY, THERMAL DEGRADATION AND MECHANICAL PROPERTIES OF BIODEGRADABLE POLYESTER BLENDS AND NANOCOMPOSITES Riaan Luyt (University of the Free State), Julia Mofokeng (University of the Free State)
Auditorium 10 Auditorium 11 1103-5 ANALYSIS OF SMART MAGNETOELECTRIC REINFORCED PLATES Demetra Hadjiloizi (Cyprus University of Technology), Alexander Kalamkarov (Dalhousie University), Chariklia Metti (Cyprus University of Technology), Pedro Pacheco (CEFET/ RJ), Marcelo Savi (COPPEUniversidade Federal do Rio de Janeiro), Tasos Georgiades (Cyprus University of Technology)
Morphology and properlends and nanocomposites of PLA and PCL blends and titania containing nanocomposites The influence of the moisture prepared through melt mixing content on the weld seam and compression moulding. A comprehensive microquality of laser welded endmechanical model for the less glass fiber reinforced polanalysis of smart composite yetherimide (GF PEI) welded and reinforced piezo-magneto GF PEI containing carbon to-thermo-elastic thin plates black was investigated. is developed on the basis of asymptotic homogenization.
11:55 1101-6 INFLUENCE OF SURFACE PREPARATION ON FUSION BONDING OF THERMOPLASTIC COMPOSITES Francisco Sacchetti (ThermoPlastic composites Reserch Center), Wouter J. W. Grouve (ThermoPlastic composites Reserch Center), Laurent L. Warnet (University of Twente), Irene Fernandez Villegas (Delft University of Technology)
1102-6 SOUND ABSORPTION OF ELECTROSPUN POLYVINYLIDENE FLUORIDE/ CARBON NANOTUBE MEMBRANES Chang-Mou Wu (ational Taiwan University of Science and Technology), M. H. Chou (National Taiwan University of Science and Technology)
Effects of β-phase crystallinity and piezoelectricity of electrospun CNT/PVDF on the sound-absorbing were studThe contamination of the sur- ied. Novel sound-absorbing face of laminate due to the re- material especially at low lease media and its effect on and middle frequency was the mechanical performance developed. of fusion bonded joints is the subject of this study.
Auditorium 12 1105-5 ANISOGRID COMPOSITE LATTICE FLOOR BEAM STRUCTURES FOR COMMERCIAL AIRPLANES Alexander Razin (Central Research Institute of Special Machinery), Valery Vasiliev (Central Research Institute of Special Machinery), Vyacheslav Barynin (Central Research Institute of Special Machinery), Andrey Azarov (Central Research Institute of Special Machinery) The paper is concerned with design, analysis, fabrication and testing of Anisogrid (Anisotropic Grid) composite lattice floor beams for the fuselage of a commercial airplane.
1105-6 COUPLING EFFECT OF COMPOSITE BLADE UNDER FLUID STRUCTURE INTERACTION Zhang Long (Northwestern polytechnical University), Huang Tao (Northwestern Polytechnical University), Jia Purong (Northwestern Polytechnical University), Jiao Guiqiong (Northwestern Polytechnical University) The blade under fluid field was simulated by both CFD and FSI methods. the responses of blade structure and fluid field was compared through the finite element analysis.
Meeting room 18 1106-5 NOVEL 3D PREFORM ARCHITECTURE FOR IMPROVED PERFORMANCE OF STRUCTURAL BEAMS Nandan Khokar (Biteam AB), Stefan Hallström (Div. of Lightweight Structures), Fredrik Winberg (Biteam AB) The paper presents a new class of composite beams produced with an Add-on textile technology demonstrated by producing and testing I-beams with full interlacement of 0/90° flanges and a ±45 web.
1106-6 ACTIVE CONTROL OF TEXTILE FORMING PROCESSES Thomas Gereke (Technische Universität Dresden-Institute of Textile Machinery and High Performance Material Technology), Farbod Nosrat Nezami (Daimler AG), Matthias Hübner (Technische Universität Dresden-Institute of Textile Machinery and High Performance Material Technology), Oliver Döbrich (Technische Universität Dresden-Institute of Textile Machinery and High Performance Material Technology), Chokri Cherif (Technische Universität Dresden-Institute of Textile Machinery and High Performance Material Technology) Simulation approaches for modelling the drape process and a tailored forming process of carbon fibre fabrics are presented with a complex automotive structural part as example.
12:15 Lunch in the Exhibition 13:30 INDUSTRY SESSION
38
Meeting room 19 1107-5 MODELLING PRESSURE DISTRIBUTION DURING COOLING OF RANDOMLY-ORIENTED STRAND CARBON/PEEK COMPOSITES Benoit Landry (McGill University), Pascal Hubert (McGill University) A model was developed to predict defect formation during compression moulding of ROS carbon/PEEK composites. It was validated by comparing the predicted defects with those found on moulded panels.
1107-6 MULTI-SCALE, MULTI-PHYSICAL PROCESS SIMULATION OF THE PRODUCTION OF MULTICURVED CFRP REINFORCEMENTS Michael Scheerer (Aerospace & Advanced Composites GmbH), Zoltan Simon (Aerospace & Advanced Composites GmbH), Tim Roser (Airbus Helicopters), Bernhard Rittenschober (ALPEX Technologies GmbH), Raphael Reinhold (Broetje Automation), Sebastian Schmidhuber (Krauss Maffei Technologies)
Meeting room 20 1108-4 A COMPARATIVE STUDY OF IMPACT PERFORMANCE AND POSTIMPACT STRENGTH OF HIGH VOLUME FRACTION RESIN TRANSFER MOULDED FLAX AND GLASS FIBRE EPOXY LAMINATES Henry Ling (University of Auckland), Mark Battley (University of Auckland), Tom Allen (University of Auckland)
Meeting room 17 1109-5 INTERFACIAL IMPROVEMENT FOR CARBON FIBER/ EPOXY RESIN MONOFILAMENT COMPOSITE MODIFIED WITH GRAPHENE OXIDE Ye Li (Beihang University), Yan Zhao (Beihang University), Junlin Chen (Beihang University), Zhe Yang (Beihang University), Yue Hao (Beihang University), Jianming Sun (Beihang University)
Experimental comparison of tensile, compressive and impact performance of flax and glass fibre laminates. Flaxfibre laminates were shown to have lower specific and absolute properties than glass.
1108-5 PROCESSING AND CHARACTERIZATION OF CARBON NANOTUBE / POLYLACTIC ACID NANOCOMPOSITE FILMS Erin Sullivan (Georgia Institute of Technology), Parvin Karimi (Texas A&M University), Francesca Gencarella (Georgia Institute of Technology), Renee Puvvada (Georgia Institute of Technology), Ben Wang (Georgia Institute of Technology), Rosario Gerhardt (Georgia Institute of Technology), Mohammad Naraghi (Texas A&M University), Kyriaki Multi-scale and multi-physical Kalaitzidou (Georgia Institute finite element process simu- of Technology) lation on an aircraft structural part is presented. Infiltration The effect of processing and spring-in simulation method on carbon nanotube/ results are verified on an RTM polylactic acid films fabricated manufactured part. via: 1) melt fiber spinning/ compression molding or 2) electrospinning/compression molding was examined.
1109-6 THERMAL CONDUCTIVITY IMPROVEMENT OF COPPER-CARBON FIBER COMPOSITE BY ADDITION OF AN INSULATOR: CALCIUM HYDROXIDE Jean-François Silvain (ICMCBCNRS), Samuel Couillaud (ICMCB-CNRS), Yongfeng Lu (UNL)
Meeting room 16 1110-5 NANOSTRUCTURED HYBRID CARBON NANOTUBE-CERAMICS HETEROSTRUCTURES： MICROSTRUCTURE EVOLUTION AND FORMING MECHANISM Changqing Hong (Harbin Institute of Technology) The interest in carbon nanotubes (CNTs) as reinforcements for ceramic and ceramic matrix composites has been growing considerably. However, the dispersion effect and mechanical properties for CNTs-ceramics are not as satisfactory as anticipated.
1110-6 MONOTONIC TENSION, FATIGUE AND CREEP BEHAVIOR OF 3D BRAIDED KD-I-SIC-FIBERREINFORCED POLYMERDERIVED SIC-MATRIX COMPOSITES AT 1100OC AND 1300OC FOR COATED AND UNCOATED SPECIMENS Xin Jing (Beihang University), Duoqi Shi (Beihang University), Xiaoguang Yang The effects of adding calcium (Beihang University) hydroxide (Ca(OH)2) to a copper-carbon fiber (30%) Monotonic tension, fatigue composite (Cu-CF(30%)) were and creep performance and studied. After sintering at 700 failure mechanisms for a °C, precipitates of calcium ox- braided SiC/SiC composite at ide (CaO) were included in th elevated temperatures were investigated in air.
Monday 20 July · Scientific Meeting room 5 Meeting room 6 1111-4 NOVEL WAVINESS DESIGN FOR THERMOPLASTIC TAPE BRAIDS TO IMPROVE MICROMECHANICAL PROPERTY PREDICTION Daniel Barfuss (TU Dresden), Maik Gude (TU Dresden), Christian Garthaus (TU Dresden) Tape braiding technology represents a novel, high rate preforming process for manufacturing composite structures. Here new ways of prediction for the resulting properties are shown.
1111-5 DUCTILITY FROM FIBRES AND MATRIX LESSONS FROM NATURAL FIBRE COMPOSITES Stephen Eichhorn (University of Exeter) This review of the literature on ductility in composite fibres, networks and composite materials will draw out some principles on which one might form the basis for a ductile composite.
Meeting room 7 1113-5 NUMERICAL MODELLING OF POLYURETHANE USED AS CORE MATERIAL IN SACRIFICIAL CLADDING FOR BLAST MITIGATION Hamza Ousji (Royal Military Academy), Mohamed Abderaouf Louar (Royal Military Academy), Bachir Belkassem (Royal Military Academy), Lincy Pyl (Vrije Universiteit Brussel), John Vantomme (Royal Military Academy)
M1 1114-5 INFLUENCE OF VOIDS ON TRANSVERSE CRACK ONSET LOCATION IN CFRP LAMINATES USING X-RAY COMPUTED TOMOGRAPHY Shigeki Aratama (Kawasaki Heavy Industries-Ltd.), Yusuke Tsumura (Kyoto University), Ryosuke Hashizume (Kyoto University), Masaaki Nishikawa (Kyoto University), Masaki Hojo (Kyoto University)
M2 1115-5 APPLICATION OF A VIRTUAL SHEAR STRESS MODEL AND COMPARISON WITH WWFE-III PREDICTIONS TO DESCRIBE THE NONLINEAR BEHAVIOR OF COMPOSITE MATERIALS Siegfried Galkin (KIT Institute of Vehicle System Technology), Fabian Johannes Schirmaier (KIT Institute of Vehicle System Technology), Luise Kärger (KIT - Institute of Vehicle System Technology)
M3 1116-5 EVALUATION OF THE CLIMBING DRUM PEEL (CDP) TEST FOR THE DETERMINATION OF THE MODE I FRACTURE TOUGHNESS OF MONOLITHIC LAMINATED COMPOSITE SPECIMENS Federica Daghia (ENS Cachan), Christophe Cluzel (ENS Cachan)
M4 1117-5 MATERIAL MODEL OF LAYERED FABRIC COMPOSITES WITH DELAMINATION PREDICTION FOR IMPACT SIMULATIONS USING STANDARD REISSNERMINDLIN SHELL FORMULATION Sylvain Treutenaere (University of Valenciennes), Fanck Lauro (University The CDP test and the classi- of Valenciennes), Bruno cal DCB test are compared Bennani (University of for monolithic composites. Valenciennes), Tsukatada Global and local indicators Matsumoto (Toyota Motor The present paper focuses Effects of voids on strengths enable us to validate the Europe), Ernesto Mottola on the comparison and reli- of CFRP laminates were Modeling nonlinear shear CDP for the determination (Toyota Motor Europe) ability of the results of blast experimentally investigatstress behavior with super- of the mode I delamination mitigation predictions with ed. X-ray CT was used to imposed transverse tension toughness. The present work provides a different material models for observe transverse cracks without needing any iteraway to predict the behaviour PU available in LS-DYNA. and voids in specimens after tion at the time integration of textile composites under testing for understanding of points to reach convergence impact with a viscoelastic mechanics. damageable model coupled to a recompuation of the realistic strain field. 1113-6 HIGH STRAIN 1114-6 1115-6 SUPPRESSION OF RATE TENSILE TESTING MICROMECHANICAL INTERLAMINAR CRACK OF ARAMID YARN - A DAMAGE SIMULATION IN UD-CFRP CONTAINING FEASIBILITY STUDY OF OF FIBRE REINFORCED FIBRE DISCONTINUITY OPTICAL MEASUREMENT COMPOSITE LAMINATES USING POLYAMIDE MESH Jørgen Kepler (Aalborg SUBJECTED TO LOW Hayato Nakatani (Osaka City University), Lennart Hansen VELOCITY IMPACT BY University), Tatsuya Imamura (Aalborg University), Peter MULTISCALE METHOD (Osaka City University), Fritsen (Aalborg University) Lei Yang (Dalian University Katsuhiko Osaka (Osaka City of Technology), Zhanjun University) High strain rate testing of Wu (Dalian University of dry aramid yarn through Technology) Interlaminar crack onset the use of ballistic test stresses in CFRP laminates equipment and high-speed A multiscale model was containing fibre discontinuivideo recording, with sup- presented to simulate and ty are improved by interlamplementary accelerometer reveal the micromechanical inar toughening using mesh measurements for force damage mechanisms of of polyamide, and they are calculation. fibre reinforced composite predicted by an analytical laminates subjected to low model. velocity impact.
M5 1118-4 BEARING STRENGTH AND INTERLAMINAR PROPERTIES OF NOVEL FIBRE REINFORCED POLYMER HYBRIDS WITH PERMEABLE METAL LAYERS Björn Bosbach (Technische Universität HamburgHarburg), Wilfried V. Liebig (Technische Universität Hamburg-Harburg), Bodo Fiedler (Technische Universität HamburgHarburg)
M6 1119-5 MICROMECHANICAL TIMELAPSE X-RAY CT STUDY OF FATIGUE DAMAGE IN UNI-DIRECTIONAL FIBRE COMPOSITES Kristine Munk Jespersen (Technical University of Denmark), Tristan Lowe (University of Manchester), Philip J. Withers (University of Manchester), Jens Zangenberg Hansen (LM Wind Power), Lars Pilgaard Mikkelsen (Technical University of Denmark)
The hybrid composites with permeable metal fabrics are manufactured by using Resin-Transfer-Moulding. Resulting in high quality composites with enhanced load bearing capability.
The study considers fatigue damage evolution in a uni-directional glass fibre composite manufactured from a non-crimp fabric, by means of X-ray Computed Tomography on cut-outs of pre-fatigued samples.
1118-5 INVESTIGATION OF THE EFFECT OF MWCNT FILLED EPOXY ADHESIVES IN ENHANCING THE QUALITY OF DISSIMILAR MATERIAL BONDED JOINTS Maria Konstantakopoulou (NEWCASTLE UNIVERSITY), George Kotsikos (NEWCASTLE UNIVERSITY)
1119-6 TIME-LAPSE X-RAY MICROTOMOGRAPHIC IMAGING OF COMPRESSIVE FAILURE IN CARBON FIBRE-EPOXY COMPOSITES Ying Wang (The University of Manchester), Costas Soutis (The University of Manchester), Philip Withers (The University of Manchester)
1120-6 DESIGN AND FATIGUE ANALYSIS OF COMPOSITE TURBINE BLADES UNDER OCEAN WAVE AND CURRENT LOADING Hassan Mahfuz (Florida Atlantic University), Marco Canino (Florida Atlantic University), Takuya Suzuki (IHI Corporation), Fang Zhou (Florida Atlantic University)
The evolution of kink bands has been observed by time-lapse X-ray µCT in the compressive zone of carbon fibre/epoxy composite under in situ four-point bend test.
Performing a static and fatigue analysis on an ocean current turbine blade through the implementation of modified National Renewable Energy Laboratory codes, based on blade element momentum theory.
The objective of this study is to investigate the effects of the surface modification of the metal substrate accompanied by modification of the adhesive properties on the strength of single lap joints
programme
M7 1120-5 CARBON-FIBER COMPOSITE CABLES FOR DEEP-WATER ANCHORAGE Eduardo Menezes (UFRGS), Lais Silva (UFRGS), Carlos Cimini (UFMG), Sandro Amico (UFRGS) This paper describes the tensile and bending behaviour of carbon fibre composite cables intended to be used on the anchorage of oil platforms by confronting experimental tests with numerical results.
M8 1121-5 BUNDLE REINFORCED POLYMER COMPOSITES FOR NOVEL STRUCTURAL BATTERIES Yalin Yu (Beihang University), Boming Zhang (Beihang University), Guocheng Qi (Beihang University), Zhanwen Tang (Beihang University) A novel structural battery was designed based on the carbon fiber bundle composites (CFBC), and the electrochemical and mechanical properties were measured experimentally and analyzed numerically.
1121-6 DESIGNER LINEAR FUNCTIONALLY GRADED VISCOELASTIC COMPOSITE MATERIALS TAILORED TO OPTIMIZE ENERGY HARVESTING Harry Hilton (University of Illinois at UrbanaChampaign) Motion damping by energy harvesting through piezoelectric devices recharging batteries and having it available to do useful work rather than simply dissipating energy by heat is a preferable process.
Lunch in the Exhibition INDUSTRY SESSION
39
Scientific programme · Monday 20 July Congress Hall A Auditorium 15 1202 Nano Composites 2 15:00 1201 Processing Manufacturing Technology 2 15:00 1201-1 CONTINIOUS PRODUCTION OF FIBRE REINFORCED THERMOPLASTIC COMPOSITES BY BRAIDING PULTRUSION Jens Schäfer (Institut für Textiltechnik der RWTH Aachen University)
Auditorium 11 1204 Fatigue 2
Auditorium 12 1205 Structural Analysis and Optimization 2
This work describes the development of a processing technology for the production of hollow thermoset CFRP parts of complex shape through the combination of pull-braiding and blow moulding.
40
1202-2 FATIGUE DELAMINATION OF A CARBON FABRIC– REINFORCED EPOXY COMPOSITE WITH CARBON NANOTUBES Martin Kadlec (VZLU Aerospace Research and Test Establishment), Jakub Šedek (VZLU - Aerospace Research and Test Establishment) This work presents decreased fatigue crack growth rate by approximately 80 % on DCB specimens made from a CFRP with 0.5 % CNTs. The rate also related to the interface of the tows of the plain weave.
1204-1 MICRO-MECHANICAL MULTIAXIAL FATIGUE 1203-1 A COMPOSITE MODEL FOR CRACK DENSITY INTELLIGENT WING WITH EVOLUTION AND STIFFNESS STATE-SENSING AND DEGRADATION AWARENESS CAPABILITIES Jens Glud (Aalborg University), Fotis Kopsaftopoulos (Stanford Janice Dulieu-Barton University), Raphael Nardari (University of Southampton), (Stanford University), YuOle Thybo Thomsen (Aalborg Hung Li (Stanford University), University), Lars Christian Fu-Kuo Chang (Stanford Terndrup Overgaard (Aalborg University) University)
1205-1 BUCKLING OPTIMIZATION OF STEERING STIFFENERS FOR GRIDSTIFFENED COMPOSITE STRUCTURES Dan Wang (Delft University of Technology), Mostafa Abdalla (Delft University of Technology)
1204-2 INFLUENCE OF IMPACT DAMAGE ON THE FATIGUE BEHAVIOUR OF LARGE SCALE COMPOSITES Bodo Fiedler (Technische Universität Hamburg-Harburg), Nils Kosmann (Technische Universität Hamburg-Harburg), Karl Schulte (Technische Universität Hamburg-Harburg)
1205-2 MINIMUM COST DESIGN OF A HYBRID LAMINATE WITH UNCERTAIN MATERIAL PROPERTIES SUBJECT TO FREQUENCY CONSTRAINTS Sarp Adali (University of KwaZulu-Natal), Isaac Radebe (Durban University of Technology)
Meeting room 18 1206 Process Induced Effects 1
1206-1 OPTICAL DEFORMATION ANALAYSIS OF THE FAILURE BEHAVIOR OF FIBER REINFORCED POLYMERS CAUSED BY LASER PROCESSING Michael Rose (Technische Universität Dresden), Andreas Fürst (Technische Universität Dresden), Jozsef-Sebastian The Flechttrusion is an Curved stiffeners are opPap (Technische Universität innovative process chain to timized for grid-stiffened Dresden), Annett Klotzbach produce fibre reinforced thercomposite structures to (Fraunhofer IWS Dresden), moplastic profiles. The main We investigated scalable pat- The complete sensor network The current research effort enhance the structural Jan Hauptmann (Fraunhofer part is about the Integration of terning of iron-coated carbon design, integration, and with regard to the develbuckling resistance and per- IWS Dresden), Irene Jansen inserts, a cost calculation and nanotube pillars using oscil- wind tunnel experimental opment of a mechanistic formances are compared with (Technische Universität a new heating technology. lating magnetic fields, in order assessment are presented micro-mechanical multiaxial variable-stiffness skins with Dresden), Eckhard Beyer to achieve highly organized for a bio-inspired intelligent fatigue model for use in wind curved fibers. (Technische Universität 1D micro-structures. composite UAV wing with turbine blade applications is Dresden) self-sensing and awareness presented. capabilities. Laser remote cutting of FRP provide fast processing. By an adapted tensile test procedure and a digital image correlation system the mechanical influence of the process on the material was examined.
15:20 1201-2 MANUFACTURING OF COMPLEX SHAPE COMPOSITE PARTS THROUGH THE COMBINATION OF PULLBRAIDING AND BLOW MOLDING Renato Bezerra (Fraunhofer Institute for Chemical Technology ICT), Frederik Wilhelm (Fraunhofer Institute for Chemical Technology ICT), Sebastian Strauß (Fraunhofer Institute for Chemical Technology ICT), Holger Ahlborn (University of Stuttgart)
1202-1 MAGNETICALLY ANISOTROPIC NANOPILLARS: MICROSTRUCTURING OF NANOCOMPOSITES USING OSCILLATING MAGNETIC FIELDS Namiko Yamamoto (Penn State University), Harish Manohara (Jet Propulsion Laboratory-California Institute of Technology)
Auditorium 10 1203 Multifunctional Composites - Sensing and Actuation 2 KEYNOTE
The hexapod testing machine is a unique set up. It is possible to perform shear, normal loads and combinations. It enables to test composite structures under mulitaxial loading conditions up to 30Hz.
Meeting room 19 1207 Process Modelling 2
Meeting room 20 1208 Biocomposites 2
Meeting room 17 1209 Interfaces and Interphases 2
Meeting room 16 1210 Foams, Cellular and Lattice Materials 1
1207-1 DEVELOPMENT OF INFUSION STRATEGY FOR COMPOSITE RAILROAD HOPPER CAR WITH FLOW SIMULATION AND VALIDATION A. E. Ushakov (ApATeCh), A. A. Safonov (Skoltech), M. Labordus (Lightweight Structures B.V.), E. I. Kornienko (ApATeCh), N. V. Rozin (Tsagi)
1208-1 RAPID AND EFFECTIVE METHODS FOR THE SCREENING OF FLAX FIBRES FOR COMPOSITE APPLICATIONS Kevin Hendrickx (KU Leuven), Ramona Delphine Romian Sitohang (KU Leuven), Toon Goedemé (KU Leuven), Aart Willem Van Vuure (KU Leuven), Jan Ivens (KU Leuven)
1209-1 LONGTERM INTERFACIAL PERFORMANCE OF SURFACE TREATED CFRP COMPOSITES UNDER HYGROTHERMAL CONDITIONS Bin Yu (Nanyang Technological University), Jinglei Yang (Nanyang Technological University)
1210-1 NOVEL GEOPOLYMER BASED SYNTACTIC FOAMS Liying Zhang (Nanyang Technological University), Fan Zhang (Nanyang Technological University), Ming Liu (Nanyang Technological University), Xiao Hu (Nanyang Technological University)
The aim of this work is to The effect of technical flax study the effect of moisture Development of infusion fibre fineness, purity and absorption and surface strategy for composite railstrength on the composite treatment of carbon fiber on road hopper car with flow performance was investigated the interfacial properties of simulation and validation. to provide screening methods carbon fiber reinforced polyThe hopper car roof and body to assess the composite suit- mer (CFRP). were both impregnated in ability of the fibres. one shot.
1206-2 A LOCAL SOLUTION FOR THE STRESS STATE IN A NEW NOTCHED RESIDUAL STRESS SPECIMEN SUBJECTED TO AN ANTISYMMETRIC BENDING LOADING CONDITIONS Johnny Jakobsen (Aalborg University), Anders Lyckegaard (-)
1207-2 NUMERICAL SIMULATION OF DYNAMIC WETTING FLOWS INTO FIBROUS MEDIA, FOR MACRO/MICRO-VOID CREATION ISSUES DURING LIQUID COMPOSITE MOLDING PROCESS Yujie Liu (Ecole des Mines de Saint-Etienne), Nicolas Moulin (Ecole des Mines de Minimum cost design of An Analytical solution for Saint-Etienne), Julien Bruchon hybrid cross-ply laminates for a newly proposed residual (Ecole des Mines de Sainta given frequency is obtained specimen is derived. The solu- Etienne), Pierre-Jacques by minimizing the thickness tion is a superposition of two Liotier (Ecole des Mines de of expensive layers. Material elastic problems and may be Saint-Etienne), Sylvain Drapier properties are taken as uncer- used to explore fatigue char- (Ecole des Mines de Sainttain using convex analysis. acteristics of a composite. Etienne) NUMERICAL SIMULATION OF DYNAMIC WETTING FLOWS INTO FIBROUS MEDIA, FOR MACRO/MICRO-VOID CREATION ISSUES DURING LIQUID COMPOSITE MOLDING PROCESS - bifluid-solid contact model involving capillary effects
1208-2 PROCESSING OF HIGH PERFORMANCE BIOCOMPOSITES FOR THE USE IN THE EUROPEAN BUILDING INDUSTRY Jovana Dzalto (Institute for Composite Materials), Luisa A. Medina (Institute for Composite Materials), Peter Mitschang (Institute for Composite Materials)
1209-2 PHYSICOCHEMISTRY OF VINYLESTER/GLASS FIBER INTERFACES USED IN SMC COMPOSITES Thibaut Bénéthuilière (Ingénierie des Matériaux Polymères-INSA Lyon / Plastic Omnium Auto Exterior), Jannick Duchet-Rumeau (Ingénierie des Matériaux Polymères-INSA Lyon), Elise By optimizing the manufactur- Dubost (Plastic Omnium ing process and using aligned Auto Exterior), Christophe fibers instead of conventional Peyre (Plastic Omnium non-wovens, the mechanical Auto Exterior - MCR), Cécile as well as physical perforMargand (Plastic Omnium mance of bio-composites Auto Exterior), Jean-François could be significantly inGérard (Ingénierie des creased. Matériaux Polymères-INSA Lyon) Evaluation of a styrene-free resin used in SMC composites for the automotive industry, in terms of wetting, impregnation, and adhesion. From micro to macroscale.
Novel geopolymer based syntactic foams containing different types of hollow microspheres were fabricated The mechanical properties of the syntactic foams were systematically studied.
1210-2 SOFT 3D ACOUSTIC METAMATERIAL WITH NEGATIVE INDEX Olivier Mondain-Monval (University of Bordeaux), Benoit Mascaro (University of Bordeaux), Olivier Poncelet (University of Bordeaux), Christophe Aristégui (University of Bordeaux), Thomas Brunet (University of Bordeaux), Aurore Merlin (University of Bordeaux), Kévin Zimny (University of Bordeaux ), Jacques Leng (University of Bordeaux)
Monday 20 July · Scientific Meeting room 5 1211 Textile-Based Composites and Fibre Architecture 2
Meeting room 6 Meeting room 7 1212 Graphene, Graphene- 1213 X-ray Computed Based Composites 2 Tomography 1
M1 1214 Fracture and Damage Micromechanics 2 1211-1 EVALUATION OF THE 1212-1 EFFECTIVE 1213-1 EFFECTIVE 1214-1 EXPERIMENTAL GEOMETRICAL INFLUENCE DISPERSION OF GRAPHENE PROPERTIES OF CHARACTERIZATION AND OF THE STITCHING YARN IN THERMOPLASTIC UNIDIRECTIONAL FLAX/ COHESIVE LAWS FOR ON THE STIFFNESS AND POLYMERS: CHEMICAL EPOXY COMPOSITES WITH DELAMINATION OF OFFSTRESS DISTRI-BUTION IN AND PROCESSING TWISTED YARNS AXIS GFRP LAMINATES CONTINUOUS CARBON FIBER STRATEGIES Ilya Straumit (KU Leuven), Esben Lindgaard (Aalborg REIN-FORCED PLASHoracio Salavagione (ICTP- Farida Bensadoun (KU University), Brian Bak TICS MADE BY TAILORED CSIC), Marta Castelaín Leuven), Stepan Lomov (KU (Aalborg University) FIBER PLACE-MENT USING (ICTP-CSIC), Fabrizio Marra Leuven), Martine Wevers (KU FINITE ELEMENT ANALYSIS (Sapienza University of Leuven) This work experimentally Uhlig Kai (Leibniz-Institut für Rome), Marián Gómezcharacterizes delamination Polymerforschung Dresden Fatou (ICTP-CSIC), Gerardo The paper present results of in GFRP laminates taking e.V.), Matteo Tosch (LeibnizInstitut für Polymerforschung Martínez (ICTP-CSIC), Carlos the modelling of unidirecinto account the influence of Dresden e.V.), Lars Bittrich Marco (ICTP-CSIC), Gary tional flax/epoxy composite the off-axis angle between (Leibniz-Institut für Poly-mer- Ellis (ICTP-CSIC), Maria samples to predict their the lamina orientation and forschung Dresden e.V.), Axel Sarto (Sapienza University effective properties taking the crack growth direction. Spickenheuer (Leibniz-Inof Rome) into account twist and misstitut für Polymerforschung alignment of the yarns. Dresden e.V.), Uwe Gohs(LeibA series of strategies to obniz-Institut für Polymer-fortain thermoplastic/graphene schung Dresden e.V.), Gert nanocomposites with Heinrich (Leibniz-Institut für improved electrical, thermal Polymerforschung Dresden and mechanical properties, e.V.) based chemical functionEVALUATION OF THE alization of graphene are GEOMETRICAL INFLUENCE presented.
M2 1215 Fracture and Damage - Laminate Scale 2 1215-1 COHESIVE LAWS FOR ANALYZING THROUGH-CRACK PROPAGATION IN CROSS PLY LAMINATES Andrew Bergan (NASA Langley Research Center), Carlos Dávila (NASA Langley Research Center)
1211-2 A NUMERICAL APPROACH MODELING THE BRAIDING PROCESS FOR ARBITRARY MANDREL SHAPES TO CALCULATE PREFORM PROPERTIES Thorsten Hans (Technical University of Munich), Roland Hinterhoelzl (Technical University of Munich)
1215-2 DAMAGE AND FAILURE OF THERMOPLASTIC LAMINATES WITH STRATIFIED AND CLUSTERED FIBERS Arief Yudhanto (KAUST (King Abdullah University of Science and Technology)), Gilles Lubineau (KAUST (King Abdullah University of Science and Technology)), Ditho Pulungan (KAUST (King Abdullah University of Science and Technology)), Husam Wafai (KAUST (King Abdullah University of Science and Technology)), Warden Schijve (SABIC), Nikhil Verghese (SABIC Technology Center)
M3 1216 Fracture and Damage - Delamination 2
M4 1217 Constitutive Models 2
1216-1 TESTING OF Z-PINNED LAMINATES WITH MULTIPLE DELAMINATIONS Mehdi Yasaee (University of Bristol), Galal Mohamed (University of Bristol), Stephen Hallet (University of Bristol)
1217-1 A MESOMECHANICAL CONSTITUTIVE MODEL OF PARTICLE REINFORCED TITANIUM MATRIX COMPOSITES AT HIGH TEMPERATURES Weidong Song (Beijing Institute of Technology), Lijun Xiao (Beijing Institute Cohesive laws are charApplication of Z-pinning is a of Technology) acterized from tests of subject of great interest in cross-ply compact tension the field of through-thickspecimens for two material ness reinforcement (TTR) systems. Results are com- of composite laminates. To pared for specimens with date, the majority of Z-pin notches machined by water- characterisation work has jet and by wire slurry saw. been cond
M5 1218 Joints - Design, Manufacturing and Testing 2 1218-1 EXPERIMENTAL AND NUMERICAL ANALYSIS OF PRELOAD IN BOLTED COMPOSITE JOINTS WITH TEMPERATURE LOADS F. Hermsdorf (Universität der Bundeswehr München), T. Matzies (Universität der Bundeswehr München), H. Rapp (Universität der Bundeswehr München) Preload loss is determined for quasi-isotropic, biaxial and UD CFRP-laminates at room temperature and 70°C. Results are compared to 3D-FE-simulations using viscoelastic and quasi-elastic method.
M6 1219 Applications Aerospace 1
M7 1220 Applications Automotive and Rail 1
1219-1 STRUCTURAL DESIGN OF AN INSTRUMENTED DOUBLESWEPT WIND TUNNEL MODEL Benjamin Lütke (DLR), Moritz Schmidt (DLR), Jens Neumann (DLR)
1220-1 EVALUATING MULTI-MATERIALCONCEPTS REGARDING TECHNICAL, ECOLOGICAL AND ECONOMICAL PROPERTIES Sebastian Kleemann (Technische Universität Braunschweig), Thomas Vietor (Technische Universität Braunschweig)
The experimental setup and the manufacturing are described. The FE model, the strength analysis and the validation by an experimentel modal analysis are presented. FSI simulations are shown.
programme
1221-1 RECENT ADVANCES IN STRUCTURAL SUPERCAPACITORS FOR TRANSPORT APPLICATIONS Emile Greenhalgh (Imperial College London), Natasha Shirshova (Durham University), Anthony Kucernak (Imperial College Due to the high complexity London), Milo Shaffer of desinging components in (Imperial College London), multi-material-design and Rita Teixeira (Imperial conflicting development College London), Alexander goals a software tool is de- Bismarck (University of veloped in order to support Vienna), Maxim Kireitseu the designing engineer. (Cytec Industrial Materials), Richard Shelton (Cytec Industrial Materials) The focus of this paper are structural power materials: structural composites which have the capacity to store and deliver electrical energy, and presents the current developments in this field.
OF THE STITCHING YARN ON THE STIFFNESS AND STRESS DISTRIBUTION IN CONTINUOUS CARBON FIBER REINFORCED PLASTICS MADE BY TAILORED FIBER PLACEMENT
1212-2 THREE-DIMENSIONAL GRAPHENE/POLYMER COMPOSITES WITH EXCEPTIONAL MULTIFUNCTIONAL PROPERTIES Zhenyu WANG (The Hong Kong University of Science and Technology), Xi Shen (The Hong Kong University of Science and Technology), Mohammad Akbari Garakani (The Hong Kong University of Science and Technology), Xiuyi Lin (The Hong Kong University The overbraiding process of Science and Technology), is virtually analyzed using the finite element method. Ying Wu (The Hong Kong University of Science and An approach to analyzed arbitrary mandrel shapes, a Technology), Xu Liu (The Hong Kong University of Science post processing procedure and Technology), Xinying Sun and a validation method are (The Hong Kong University presented. of Science and Technology), Jang-Kyo Kim (The Hong Kong University of Science and Technology)
1213-2 MOISTUREINDUCED SWELLING PROPERTIES OF NATURAL CELLULOSE FIBRES CHARACTERIZED BY SYNCHROTRON X-RAY COMPUTED TOMOGRAPHY Kristofer Gamstedt (Uppsala University), Thomas Joffre (Uppsala University), Per Isaksson (Uppsala University), Simon Sticko (Uppsala University), Pierre Dumont (Université Grenoble Alpes), Sabine Rolland du Roscoat (Université Grenoble Alpes), Laurent Orgéas (Université Grenoble Alpes)
1214-2 FATIGUE DAMAGE IN SHORT GLASS FIBER REINFORCED PA66: MICROMECHANICAL MODELING AND MULTISCALE IDENTIFICATION APPROACH Nicolas Despringre (ARTS), Yves Chemisky (Arts & Métiers ParisTech), Fodil Meraghni (Arts & Métiers ParisTech), Joseph Fitoussi (Arts & Métiers ParisTech), Gilles Robert (Solvay)
M8 1221 Multifunctional Composites - Energy Storage and Harvesting 2 KEYNOTE
A micromechanical fatigue visco-damage model for short glass fiber reinforced The hygroexpansion coefpolyamide-66 is developed ficients of the cell wall of a for specific microstructure. single microscale wood fibre It includes complex damage is determined by synchro- mechanisms and matrix Effect of fiber clustering on tron X-ray micro computed viscosity. damage of glass/polyproThe exceptional multi-functomography and inverse 3D pylene (GFPP) is studied tional properties of the 3D finite element modeling. through monotonic and cygraphene/polymer composites clic tests. Micromechanical indicate that 3D GF and GA are framework is also proposed more effective compared to 1D to predict damage growth CNTs or 2D graphene sheets in GFPP.
1216-2 TESTING OF DELAMINATION BEHAVIOUR UNDER PURE MODE III LOADING Yangyang Ge (Institut Clément Ader-IUT Tarbes de l’Université Toulouse), Xiaojing Gong (Institut Clément Ader-IUT Tarbes de l’Université Toulouse), Anita Hurez (Département de Recherche en Ingénierie des Véhicules pour l’Environnement-IUT Le Creusot de l’Université de Bourgogne), Emmanuel De Luycker (Institut Clément Ader-IUT Tarbes de l’Université Toulouse) Major testing methods for characterizing the pure mode III delamination behaviors of composites are discussed and a new test Edge-Ring-Crack-Torsion method (ERCT) has been developed.
1217-2 AN INVARIANTBASED ANISOTROPIC THERMO-PLASTIC MATERIAL MODEL FOR SHORT FIBER REINFORCED THERMOPLASTICS Aamir Dean (Leibniz Universität Hannover), José Reinoso (Leibniz Universität Hannover), Shahab Sahraee (Leibniz Universität Hannover), Raimund Rolfes (Leibniz Universität Hannover) This paper is concerned with the development of a new coupled thermomechanical invariant-based transversely-isotropic elastic-plastic constitutive model for short fibre reinforced composites.
1218-2 NUMERICAL AND EXPERIMENTAL INVESTIGATION OF LOADSHARING IN COMPOSITE BONDED-BOLTED JOINTS Kobye Bodjona (McGill University), Gyu-Hyeong Lim (McGill University), Karthik Raju (McGill University), Larry Lessard (McGill University) An efficient global finite element model of a hybrid bonded-bolted joint is proposed. An experimental validation of this model using a bespoke instrumented bolt is also presented.
1219-2 SHOCK PROPAGATION BEHAVIOR OF CFRP LATTICE STRUCTURES Tomohiro Yokozeki (University of Tokyo), Kento Shimode (University of Tokyo), Takahira Aoki (University of Tokyo), Keita Terashima (Japan Aerospace Exploration Agency), Toru Kamita (Japan Aerospace Exploration Agency)
1220-2 FEA USING DESIGN OPTIMIZATION TECHNIQUE FOR AN APPLICATION OF CARBON FIBER REINFORCED THERMOPLASTICS TO AUTOMOBILE BODY STRUCTURE Toshiro Ohori (The Univercity of Tokyo), Takahiro Hayashi (The Univercity of Tokyo), Jun Takahashi (The Univercity of Tokyo)
Shock response behavior of composite lattice structure is experimentally evaluated. The shock attenuation characteristics of lattice structure are discussed based on wave analysis.
We investigate weight-lightening possibility of S-crank frame structure using CFRTP. Here, we introduce the study using optimization tools in FEM software.
as composite reinforcement
41
Scientific programme · Monday 20 July Congress Hall A 15:40 1201-3 HIGH-CYCLE MOLDING OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC COMPOSITES PIPE Asami Nakai (Gifu University), Tadashi Uozumi (Gifu University), Akio Ohtani (Gifu University), Satoshi Nagoh (TOYOBO Co.-Ltd.)
Auditorium 15 1202-3 EFFECTS OF CARBON NANOTUBE CONTENTS ON MECHANICAL AND ELECTRICAL PROPERTIES OF MULTI-SCALE CARBON NANOTUBE-FIBER REINFORCED EPOXY RESIN COMPOSITES Shaofeng Lin (National University of Defense Technology), Cai Jiang The purpose of this study is (National University of to construct frame structure Defense Technology), Jianwei of continuous fiber reinforced Zhang (National University of thermoplastic composites Defense Technology), Dazhi with high impregnated inter- Jiang (National University of mediate materials and the Defense Technology) high cycle molding. Amino-functionalized multi-walled carbon nanotubes and MWCNTs Buckypaper (BP) were used in CFRP to increase mechanical properties and electrical conductivities of the CNTs/CF/epoxy composites. 1202-4 INFLUENCE OF 16:00 1201-4 ADVANCES IN THERMOPLASTIC CNT THIN SHEETS ON THE PULTRUDED COMPOSITES INTERLAMINAR SHEAR Paulo Jorge Novo (Polytechnic STRENGTH OF LAMINATES Institute of Leiria), Joao Ling Liu (Tongji University), Francisco Silva (ISEP), Lulu Shen (Tongji University) Joao Pedro Nunes (Minho University), Antonio Torres Influence of carbon nanotube Marques (University of Porto) buckypaper on the mode II interlaminar fracture toughDifferent thermoplastic ness and interlaminar shear pre-impregnated materials strength, and the correspondwere produced and processed ing fracture characteristics by pultrusion and the composite profiles were submitted to testing. The obtained results were discussed.
16:20 Coffee in the Exhibition
42
Auditorium 10 1203-2 STUDY ON THE SENSING FUNCTION OF Z-PINS Bing Zhang (University of Bristol), Giuliano Allegri (Imperial College London), Mehdi Yasaee (University of Bristol), Stephen Hallett (University of Bristol) This paper investigates the self-sensing behaviour of carbon/BMI Z-pin reinforced composite laminates and the multifunctional applications (delamination bridging and sensing) of carbon/BMI Z-pins.
1203-3 MAN-MADE CELLULOSE FIBERS COATED WITH CARBON NANOTUBE NETWORKS AS UNIQUE SMART MATERIALS Haisong Qi (Leibniz Institute of Polymer Research Dresden), Jianwen Liu (Leibniz Institute of Polymer Research Dresden), Yinhu Deng (Leibniz Institute of Polymer Research Dresden), Shang-Lin Gao (Leibniz Institute of Polymer Research Dresden), Edith Mäder (Leibniz Institute of Polymer Research Dresden)
Auditorium 11 1204-3 FATIGUE BEHAVIOUR AND ITS DAMAGE MECHANICS MODELING FOR COMPOSITE LAMINATES UNDER MULTIAXIAL LOADINGS Feng Yubo (Harbin Institute of Technology), Zhang Li (Harbin Institute of Technology), Guo Licheng (Harbin Institute of Technology), Zhang Yidong (Harbin Institute of Technology), Liu Yingzhi (Harbin Institute of Technology)
Auditorium 12 1205-3 ROBUST DESIGN OF EFFICIENT DAMAGE TOLERANT LAMINATES BY ELASTIC ENERGY MINIMISATION Mark Nielsen (University of Bath), Andrew Rhead (University of Bath), Richard Butler (University of Bath)
1204-4 STUDY OF THE BEHAVIOUR OF A WOVEN GLASS-FIBREREINFORCED COMPOSITE WITH A THERMOPLASTIC MATRIX FOR AUTOMOTIVE APPLICATION Amelie Malpot (PPrime Institute (DPMM)), Fabienne Touchard (PPrime Institute (DPMM)), Sébastien Bergamo (Renault)
1205-4 EXPERIMENTAL POSTBUCKLING STUDY OF PRE-CONFORMED COMPOSITE PLATES Antonio Blazquez (University of Seville), Jesus Justo (University of Seville), Rafael Roig (University of Seville), Federico París (University of Seville)
Optimisation for minimum mass whilst accounting for uncertain loading reduces mass by up to 15% compared to current design practice. However, use of non-standard ply angles offers little benefit.
Meeting room 18 1206-3 REAL AREA OF CONTACT IN CARBON FABRIC FORMING Olga Smerdova (Institut Pprime), Michael Sutcliffe (University of Cambridge), Daniel Mulvihill (University of Cambridge)
Meeting room 19 1207-3 A LEVEL SET METHOD FOR VACUUM INFUSION OF COMPOSITE MATERIALS Carlos Gonzalez (Polytechnic University of Madrid & IMDEA Materials Institute), Joaquim Vila (IMDEA Materials Institute), Javier LLorca (Polytechnic University of Madrid & IMDEA Materials Institute)
Meeting room 20 1208-3 DEVELOPMENT OF A FLAX FIBER REINFORCED POLYMER FOR REINFORCED CONCRETE STRUCTURES STRENGTHENING Anne Hallonet (LGCIE Bohr - University Claude Bernard Lyon 1), Emmanuel Ferrier (LGCIE Bohr - University Claude Bernard Lyon 1), Laurent Michel (LGCIE Bohr - University Claude Bernard Lyon 1)
Meeting room 17 1209-3 ANALYSIS CHAIN TO DETERMINE THE CHEMICAL REACTION PATH BETWEEN CARBON FIBER SURFACE, SIZING AND RESIN Denise Wetjen (BMW AG), Jochen Töpker (BMW AG), Torsten Schunk (BMW AG), Felix Schmidt-Stein (BMW AG), Judith Moosburger-Will (University of Augsburg), Siegfried Horn (University of Augsburg)
Meeting room 16 1210-3 IN-PLANE COMPRESSIVE RESPONSE OF HONEYCOMBS WITH NON-UNIFORM WALL THICKNESS AND CELL SIZE Youming Chen (The University of Auckland), Raj Das (The University of Auckland), Mark Battley (The University of Auckland)
1207-4 OPTIMISATION OF FORMING PROCESS FOR HIGHLY DRAPEABLE FABRICS Shuai Chen (The University of Nottingham), Lee Harper (The University of Nottingham), Andreas Endruweit (The University of Nottingham), Nicholas Warrior (The University of Nottingham)
1208-4 INVESTIGATION OF PATTERN STYLE OF WOVEN FABRICS PRODUCED FROM HYBRID WRAP SPUN YARNS ON FABRICATED COMPOSITE Behnaz Baghaei (University of Borås), Mikael Skrifvars (University of Borås)
1209-4 EVALUATION OF THE INTERFACIAL FRACTURE TOUGHNESS OF A CARBON FIBER REINFORCED THERMOPLASTIC COMPOSITE BY CYCLIC SINGLE-FIBER PUSH-OUT TESTS Michael Greisel (University of Augsburg), Michael Schulz (University of Augsburg), Judith Moosburger-Will (University of Augsburg), Wolfgang M. Mueller (University of Augsburg), Siegfried Horn (University of Augsburg)
1210-4 SOLID STATE POLYLACTIDE-POLY(METHYL METHACRYLATE) PRECURSORS FOR THE IN-LINE PRODUCTION OF FOAM CORE SANDWICH STRUCTURES Yonghoon Yoon (Ecole Polytechnique Fédérale de Lausanne), Christopher Plummer (Ecole Polytechnique Fédérale de Lausanne), Jan-Anders Månson (Ecole Polytechnique Fédérale de Lausanne)
An experimental method has been developed to examine the microscopic contact conditions in composites forming. The technique is applied to a A level set model for fluid flow woven fabric and a single tow through a fiber preform using contacting a glass plate. vacuum infusion is presented. The model is correlated using digital image correlation of the bag displacement during infusion.
1206-4 CHARACTERISATION OF VISCOELASTIC MATERIAL PROPERTIES DURING CURING PROCESSES Sibin Saseendran (Swerea SICOMP), Maciej Wysocki (Swerea SICOMP), Janis Varna (Luleå University of Technology)
The present contribution is The possibility of avoiding the toward systematic charactervariability in the postbuckling isation the thermo-viscoelasTensile-tensile fatigue regime is analyzed. Some ticity of a curing epoxy resin. behaviour of a woven glass-fi- panels were manufactured The results indicate that time, bre-reinforced composite including intentionally specific temperature and curing obey with polyamide 6,6 resin is imperfections. a linear relationship. Excellent sensing ability, re- investigated using acoustic producibility and selectivity of emission and infrared camera cellulose fibers to liquid water techniques. and volatile molecules was achieved by CNT coating and has the potential to be used as smart materials.
The irregular honeycombs with cell size and wall thickness following lognormal This study presents the deCarbon fibers are coated distributions were manufacvelopment of a new externally with a sizing after the electured using a 3D printer, and bonded flax FRP for reinforced trochemical activation; the the in-plane compressive concrete strengthening with according chemistry controls response of the honeycombs mechanical behavior charac- the interaction of the fiber and were tested. terization in tension and of the the resin. adherence with concrete.
This paper focuses on the effect of weave structure on the thermal and mechanical A genetic algorithm is coupled behavior as well as moisture with a finite element model absorption of the PLA/hemp to optimise the arrangement woven fabric composites of in-plane constraints for made by compression a composite press-forming molding. problem.
An expanded approach to quantify the relevant energy dissipated in stable crack propagation during single-fiber push-out testing of a carbon fiber reinforced thermoplastic composite is presented.
Bio friendly foam precursor was prepared and characterized by PLA/PMMA in order to modify thermal behavior of PLA. A sandwich structure was demonstrated by particleboard faces and CO2 blown foam core.
Monday 20 July · Scientific Meeting room 5 1211-3 FIBRE ARCHITECTURE DESIGN OF 3D WOVEN COMPOSITE REINFORCEMENT WITH GENETIC ALGORITHMS-A UNIT CELL BASED OPTIMISATION FRAMEWORK AND PERFORMANCE ASSESSMENT Xuesen Zeng (University of Nottingham), Andrew Long (University of Nottingham), Ian Ashcroft (University of Nottingham), Prasad Potluri (University of Manchester) We present a novel approach to couple Genetic Algorithms and unit cell modelling to optimize 3D woven composites - in the case of constant stiffness design for aircraft landing gear braces. 1211-4 INFLUENCE OF TEXTILE DESIGN PARAMETERS ON DRAPEABILITY OF WARPKNIT NCF Mirko Christ (Faserinstitut Bremen e.V.), Axel Herrmann (Faserinstitut Bremen e.V.)
Meeting room 6 1212-3 A MICROMECHANICAL STUDY OF GRAPHENE REINFORCED EPOXY NANOCOMPOSITES Xin Zhao (University of Manchester), Robert Young (University of Manchester)
Meeting room 7 1213-3 IDENTIFICATION OF TRUE MICROSTRUCTURE OF COMPOSITES BASED ON VARIOUS FLAX FIBER ASSEMBLIES BY MEANS OF THREE-DIMENSIONAL TOMOGRAPHY Arttu Miettinen (University The efficiency of reinforce- of Jyväskylä), Roberts ment for pristine graphene Joffe (Luleå University of with two different lateral Technology), Liva Pupure size but same thicknesses (Luleå University of within the bulk epoxy Technology), Bo Madsen nanocomposites has been (Technical University of studied by SEM and Raman Denmark) spectroscopy. Microstructure of flax fibre composites is studied with X-ray tomography and image analysis. The stiffness of the composites is estimated with micromechanical models.
M1 1214-3 A MICROMECHANICAL APPROACH TO INVESTIGATE THE INFLUENCE OF VOIDS ON THE STRUCTURAL BEHAVIOUR OF FRP UNDER COMPRESSION LOADING Wilfried Liebig (Technische Universität HamburgHarburg), Karl Schulte (Technische Universität Hamburg-Harburg), Bodo Fiedler (Technische Universität HamburgHarburg)
M2 1215-3 TEMPERATURE DRIVEN FRACTURE MECHANISMS IN UD/ WOVEN CARBON FIBRE EPOXY COMPOSITES James Meredith (University of Sheffield), Peter Wilson (University of Sheffield), Joel Foreman (University of Sheffield), Mahmoud Mostafavi (University of Sheffield)
M5 1218-3 EXPERIMENTAL INVESTIGATION OF THE MECHANICAL BEHAVIOR OF BOLTED CERAMICMATRIX COMPOSITE JOINTS USING MULTIINSTRUMENTATION Blanche Legin (Université de Technologie de Compiègne), The influence of specimen Zoheir Aboura (Université de twisting during anti-plane Technologie de Compiègne), shear (mode III) loading in Pierre Feissel (Université de composite split beam specTechnologie de Compiègne), Investigation into the effect imens is studied using the Different non-linear material Florent Bouillon (SAFRAN of cure schedule on temper- split-shear torsion test. models have been studied. Herakles) ature driven inter and intra Methodology for simulating laminar fracture in cross ply nonlinear stress-strain The damage process of The subject of this presenta- carbon epoxy composites response in iso-strain situ- bolted ceramic matrix tion is the development of a via digital image correlation ations of composites based composite joints tested micromechanical approach on constituent properties is under tensile loading was to investigate the influence presented. investigated by coupling of voids on the structural experimental methods (stebehaviour of FRP under reo-DIC and AE). compression load.
M6 1219-3 TESTING AND ANALYIS OF ANISOGRID PREPREG ELEMENT SPECIMEN UNDER UNIAXIAL TENSION AND COMPRESSION Steffen Niemann (German Aerospace Centre), Ronald Wagner (German Aerospace Centre), Matthias Beerhorst (German Aerospace Centre), Christian Hühne (German Aerospace Centre)
1212-4 EFFECT OF HEAT TREATMENT ON CONDUCTIVITY OF DOPED POLY(ANILINE)/GRAPHENE OXIDE COMPOSITE Shigeji Konagaya (Nagoya university), Mariko Terada (Nagoya university)
1214-4 INVESTIGATING INTERLAMINAR FRACTURE IN TOUGHENED CFRP’S VIA QUANTITATIVE CT ANALYSIS Gregor Borstnar (University of Southampton), Mark Noel Mavrogordato (University of Southampton), Qingda Yang (University of Miami), Ian Sinclair (University of Southampton), Mark Spearing (University of Southampton)
1215-4 EXPERIMENTAL INVESTIGATION ON PERFORMANCE OF COMPOSITE JOINTS WITH EMBEDDED STEEL PLATE Shufeng Liu (Beihang University), Yunyan Xu (Beihang University), Xiaoquan Cheng (Beihang University), Jiayi Qi (Beihang University), Gaofeng Dong (Beihang University)
1216-4 MODELLING THE DOUBLE CANTILEVER BEAM TEST WITH BENDING MOMENTS BY USING BILINEAR DISCONTINUOUS COHESIVE LAWS Paolo S. Valvo (University of Pisa), Bent F. Sørensen (Technical University of Denmark), Helmuth L. Toftegaard (Technical University of Denmark)
1219-4 INVESTIGATION ON THE IMPACT PROPERTIES OF GLASS FIBER/ EPOXY COMPOSITES AT CRYOGENIC CONDITION Hei Lam Ma (The Hong Kong Polytechnic University), Kin Tak Lau (The Hong Kong Polytechnic University), Jinsong Leng (Harbin Institute of Technology)
This article focuses on the tensile strength and CT studies that identify stiffness of the metallic the chronology of damage inserts composite structure. events and crack paths And two forms of inserts within toughened CFRP in- structure were compared: terlayers are used to inform the blunt and tapered tip micromechanical A-FEM steel inserts. simulations to highlight the competing mechanisms
A theoretical model of the DCB-UBM test is presented, based on bilinear discontinuous cohesive laws. The analytical solution is compared to experimental test results for fracture modes I and II.
1213-4 ASSESSMENT OF ACCURACY OF FIBRE ORIENTATION MEASUREMENT USING X-RAY COMPUTED TOMOGRAPHY Dietmar Salaberger (University of Applied Sciences Upper Austria), The Textechno Drapetest The conductivity of PANI/ Peter Hine (University of automatic drapeability GO thin film composites Leeds), Michael Jerabek tester was used on a set increases with PANI content (Borealis Polyolefine GmbH), of NCF that were chosen and heat-treatment temJohann Kastner (University to show the influence of perature, which is due to of Applied Sciences Upper textile design parameters on DBSA contained as a dopant Austria) drapeability effects. in PANI. The accuracy of fibre orientation measurement using X-ray CT was determined for short glass fibre filled polymers. 3D CT analysis gives the same tensor values as the 2D sectioning standard method.
M3 1216-3 INFLUENCE OF SPECIMEN TWISTING ON FRACTURE SURFACE EVOLUTION IN THE SPLITSHEAR TORSION TEST Allison Johnston (Syracuse University), Barry Davidson (Syracuse University)
M4 1217-3 APPLICATIONS AND LIMITATIONS OF NONLINEAR VISCOELASTIC MODEL FOR SIMULATION OF BEHAVIOUR OF POLYMER COMPOSITES Liva Pupure (Luleå University of Technology), Janis Varna (Luleå University of Technology), Roberts Joffe (Luleå University of Technology)
1217-4 MODELING THE STRAIN-RATE, TEMPERATURE AND PRESSURE DEPENDENT MECHANICAL RESPONSE OF A HIGHLY CROSSLINKED AEROSPACE GRADE EPOXY RESIN UP TO LARGE DEFORMATION Frédéric Lani (Institute of Mechanics-Materials and Civil Engineering (IMMC)University of Louvain), Xavier Morelle (Institute of Mechanics-Materials and Civil Engineering (IMMC)University of Louvain), Christian Bailly (Institute of Condensed Matter and Nanosciences (IMCN)University of Louvain), Thomas Pardoen (Institute of Mechanics-Materials and Civil Engineering (IMMC)University of Louvain)
1218-4 SIZING OF BOLTED JUNCTIONS FOR 3D-WOVEN CERAMIC MATRIX COMPOSITES STRUCTURES USING ONERA DAMAGE MODEL AND COMPARISONS WITH MULTI-INSTRUMENTED TESTS Etienne Voland (SAFRAN Herakles), Florent Bouillon (SAFRAN Herakles), Thomas Vandellos (SAFRAN Herakles), Axel Candeau (SAFRAN Herakles), Zoheir Aboura (Université de Technologie de Compiègne), Frédéric Laurin (ONERA), Blanche Legin (Université de Technologie de Compiègne)
Analysis of 3D woven Ceramic Matrix Composite bolted junctions during single lap shear test using the dialog between simulations The non-linear behavior of with the damage model the RTM6 aerospace grade ODM-CMC and multi-intruepoxy resin is characterized mented experimental tests and modeled by addressing the effects of strain-rate, temperature and hydrostatic pressure.
programme
M7 1220-3 LIGHTWEIGHTING ROAD FREIGHT SEMITRAILERS THROUGH THE APPLICATION OF COMPOSITES IN TRAILER DECKING Joel Galos (University of Cambridge), Michael Sutcliffe (University of Cambridge), David Cebon (University of Cambridge)
The potential application of different lightweight This paper reports on uniax- composite materials to ial tension and compression semi-trailer decking is extest results of Anisogrid amined. Existing hardwood Prepreg knot and rib spec- decking is heavy and a imen to give an answer significant contributor to fuel which stiffness and strength consumption. properties can be expected.
Low velocity impact test was performed for Glass fiber/Epoxy composites. Results showed that composites at cryogenic condition exhibited smaller damage but had relatively poor energy absorbability.
1220-4 EVALUATION OF BRAIDING AS A METHOD FOR THE MANUFACTURING OF COMPOSITE PRESSURE VESSELS Michael Lengersdorf (Institut für Textiltechnik (ITA) of RWTH Aachen University), Thomas Gries (Institut für Textiltechnik (ITA) of RWTH Aachen University), Jörg Multhoff (ISATEC GmbH) Composite pressure vessels are nowadays mostly manufactured by wet-filament winding. This paper evaluates braiding as an alternative method for the manufacturing of composite pressure vessels.
M8 1221-2 MULTIFUNCTIONAL COMPOSITE MATERIALS USING LITHIUM ION FUNCTIONALIZATION Dan Zenkert (KTH - Royal Institute of Technology), Eric Jacques (KTH - Royal Institute of Technology), Göran Lindbergh (KTH - Royal Institute of Technology), Simon Leijonmarck (Swerea SICOMP) In this paper we show how one can functionalise carbon fibres electrochemically. This enables several multi-functional uses of carbon fibres, such as sensing, actuation and energy harvesting.
1221-3 FUNCTIONAL STRUCTURAL BATTERY Wilhelm Johannisson (KTH Royal Institute of Technology), Niklas Ihrner (KTH Royal Institute of Technology), Simon Leijonmarck (KTH Royal Institute of Technology), Johan Hagberg (KTH Royal Institute of Technology), Dan Zenkert (KTH Royal Institute of Technology), Göran Lindbergh (KTH Royal Institute of Technology) A novel energy-storing carbon fiber composite electrode is produced, and investigated with regards to the mechanical properties of the composite and electrochemical properties of the electrode.
43
Scientific programme · Monday 20 July Congress Hall A Auditorium 15 1302 Nano Composites 3 16:40 1301 Processing Manufacturing Technology 3
Auditorium 10 1303 Multifunctional Composites - Sensing and Actuation 3 1302-1 HIERARCHICAL 1303-1 MONITORING 16:40 1301-1 MANUFACTURE WITH SPREAD TOW FIBER HYBRID COMPOSITES OF FATIGUE INDUCED MATERIALS, FOR REDUCED WITH SECONDARY CNT PROPAGATING MICRO-CRACKING NANOREINFORCEMENT: DELAMINATIONS USING Kurt Olofsson (Swerea COMPUTATIONAL EMBEDDED FIBRE BRAGG SICOMP), David Mattsson MODELLING GRATING SENSORS AND (Swerea SICOMP), Runar Leon Mishnaevsky Jr. OPERATIONAL MODAL Langstrom (Swerea SICOMP), (Technical University of PARAMETER ESTIMATION. Fredrik Ohlsson (Oxeon AB) Denmark), Gaoming Dai Alfredo Lamberti (Vrije (Technical University of Universiteit Brussel (VUB)), TeXtreme® was introduced Denmark) Gabriele Chiesura (Ghent in a cryogenic fuel tank. University), Ben De Pauw Processability adjustments Effect of secondary CNT (car- (Vrije Universiteit Brussel were introduced to the mate- bon nanotube) reinforcement (VUB)), Steve Vanlanduit (Vrije rial, which lowered the result- on fatigue resistance of hybrid Universiteit Brussel (VUB)) ing void content and needed and carbon fiber reinforced mould filling times. composites is studied using We investigate the use of emcomputational modelling bedded Fibre Bragg Grating sensors to monitor the modal frequencies shifts induced by a delamination which propagates in a composite beam subjected to fatigue load.
17:00 1301-2 CARBON FIBER TOW SPREADING PROCESS USING PNEUMATIC DEVICES AND APPLICATION TO THERMOPLASTIC PREPREG MANUFACTURING Gyu Hee Lee (Seoul National University), Woo Il Lee (Seoul National University)
1302-2 EFFECTS OF CARBON NANOTUBE CONTENTS ON GLASS TRANSITION TEMPERATURE OF EPOXY MATRIX COMPOSITES Cai Jiang (National University and Defense Technology), Jianwei Zhang (National University of Defense Technology), Shaofeng Lin Continuous 12k carbon fiber (National University and tow spreading process using Defense Technology), Fubiao air knife was investigated. The Yang (National University and tow spread width and spread Defense Technology), Dazhi uniformity for 2 different Jiang (National University and process parameters were Defense Technology) quantitatively evaluated. Molecular dynamics simulation for carbon nanotubes (CNTs) reinforced epoxy matrix composites was conducted to study effects of CNT contents on glass transition temperature of the composites.
44
1303-2 CONCEPT STUDY FOR THE MATERIAL COMPLIANT IMPLEMENTATION OF THE RFID TECHNOLOGY INTO CARBON FIBRE STRUCTURES Alexander Horoschenkoff (Munich University of Applied Sciences), Nadine Deichelsberger (Munich University of Applied Sciences), Andreas Bierbaumer (Munich University of Applied Sciences), Jürgen Rackles (Munich University of Applied Sciences)
Auditorium 11 1304 Fatigue 3
Auditorium 12 1305 Structural Analysis and Optimization 3
1304-1 A NEW SCALING PARAMETER FOR DELAMINATION GROWTH IN COMPOSITE LAMINATES UNDER FATIGUE LOADING Matthew Donough (RMIT University), Andrew Gunnion (CRC-ACS), Adrian Orifici (RMIT University), Chun Wang (RMIT University)
1305-1 NUMERICAL CHARACTERIZATION OF THE KNOCK-DOWN FACTOR ON UNSTIFFENED CYLINDRICAL SHELLS WITH INITIAL GEOMETRIC IMPERFECTIONS Mariano Arbelo (PFH Private University of Applied Sciences), Kaspars Kalnins (Riga Technical Universityq), A new scaling parameter Olgerts Ozolins (Riga that is consistent with the Technical University), Saulo similitude principle and Castro (PFH Private University incorporates the effects of of Applied Sciences), fibre bridging is proposed to Richard Degenhard (German unify the mode I and II fatigue Aerospace Center) delamination growth rates. The aim was to validate experimental test results, including imperfection measurements of composite cylinders, with FEM and point out their limitation, advantage and disadvantage against KDF approach.
1304-2 ULTRASONIC FATIGUE OF CARBON FIBER FABRIC REINFORCED POLYPHENYLENSULFIDE IN THE VERY HIGH CYCLE FATIGUE REGIME: TEST PROCEDURE AND MICROSTRUCTURAL ANALYSIS Frank Balle (University of Kaiserslautern), Daniel Backe (University of Kaiserslautern), Dietmar Eifler (University of Kaiserslautern)
1305-2 BUCKLING AND POST-BUCKLING IN CARBON/EPOXY FILAMENT WOUND COMPOSITE TUBES UNDER TRANSVERSE COMPRESSION José Humberto Almeida Jr. (Federal University of Rio Grande do Sul), Volnei Tita (University of São Paulo – São Carlos School of Engineering), Hugo Faria (INEGI - Institute of Mechanical Engineering and Industrial Management), António Marques (Faculty of Engineering of the University of Porto), Sandro Amico (Federal University of Rio Grande do Sul)
The fatigue behavior of CFPPS in the VHCF-regime was studied by a new developed ultrasonic testing facility for Carbon fibres are used to built cyclic bending at 20 kHz aca radio-frequency identifica- companied by microscopy and Non-linear models and tion (RFID) system, a transonline damage monitoring. progressive failure analysis mitter-receiver system for pointed an increase in maxwireless power transmission imum compressive load for and health monitoring in mulhigh angles. Matrix tensile tifunctional composites. and matrix compression induced by shear dominate the failure mode.
Meeting room 18 1306 Process Induced Effects 2
Meeting room 19 1307 Process Modelling 3
KEYNOTE
1307-1 ABOUT THE MODELING OF THE LASER 1306-1 BULK AND SURFACE ASSISTED TAPE PLACEMENT POROSITY IN OUT-OFPROCESS AUTOCLAVE PREPREGS Cyril Dedieu (GeM-UMR James Kay (The University CNRS), Francisco Chinesta of British Columbia), Jeremy (GeM-UMR CNRS), Anaïs Wells (The University of British Barasinski (GeM-UMR CNRS), Columbia), Anoush Poursartip Adrien Leygue (GeM-UMR (The University of British CNRS), Jean-Marc Dupillier Columbia), Göran Fernlund (Airbus Defence and Space) (The University of British Columbia) The study of the establishment of residual stresses In composites manufacturing in the Automated Tape both bulk and surface porosity Placement process of therare undesirable outcomes moplastic matrix composites. that should be minimized or Two modeling approaches are eliminated. Bulk porosity neg- detailed and compared. atively impacts mechanical properties whereas surface poros
1307-2 COMBINING DRAPING AND INFUSION MODELS INTO A COMPLETE PROCESS MODEL FOR COMPLEX COMPOSITE STRUCTURES Robert Pierce (Monash University), Brian Falzon (Queen’s University), Mark Thompson (Monash University)
Meeting room 20 1308 Biocomposites 3
Meeting room 17 1309 Interfaces and Interphases 3
Meeting room 16 1310 Foams, Cellular and Lattice Materials 2
1308-1 MULTIPLE FIBER BREAKAGE BEHAVIOR ON SINGLE YARN FRAGMENTATION TEST OF NATURAL FIBER COMPOSITES Junji Noda (Yamaguchi University), Tomohiro Sugita (Yamaguchi University), Koichi Goda (Yamaguchi University)
1309-1 INTERFACIAL EFFECTS IN CORESHELL POLYMER NANOCOMPOSITES Polycarpos Pissis (National Technical University of Athens), Panagiotis Klonos (National Technical University of Athens), Apostolos Kyritsis (National Technical University of Athens), Vladimir M Gun’ko (National Academy of Sciences of Ukraine)
1310-1 MODELLING OPEN CELL FOAM STRUCTURES BASED ON 3D IMAGE DATA André Liebscher (TU Kaiserslautern), Dennis Merkert (TU Kaiserslautern), Claudia Redenbach (TU Kaiserslautern)
1308-2 ANALYSIS OF PROCESSING PARAMETERS ON THE MECHANICAL BEHAVIOR OF MANICARIA FABRIC/PLA BIOCOMPOSITE LAMINA BY THE TAGUCHI METHOD. Alicia Porras (Universidad de los Andes), Alejandro Maranon (Universidad de los Andes), Ian A Ashcroft. (University of Nottingham)
1309-2 ENHANCEMENT OF INTERFACIAL ADHESION IN EPOXY/GLASS/GRAPHENE MULTISCALE COMPOSITES Haroon Mahmood (University of Trento-Italy), Alessandro Pegoretti (University of Trento-Italy)
We present a 3D image data based modelling approach for To investigate the effect of open cell foams that realistiTPI of natural fiber yarns on cally reproduces the foam’s multiple fiber breakages and microstructure as well as its stress recovery behavior DSC and dielectric techniques effective material properties. using single yarn composites, were employed to study glass fragmentation tests and FEA transition and dynamics in the were implemented. interfacial layer in core-shell type polymer nanocomposites based on poly(dimethyl siloxane) and metal oxides
1310-2 INSIGHT ON THE DYNAMIC BEHAVIORS OF ALUMINUM FOAM BASED ON THE NEW PLASTIC CONSTITUTION Lingling Hu (Sun Yat-sen University), Liwen Xiong (Sun Yat-sen University), T. X. Yu (The Hong Kong University of In this work, the aim is to use Science and Technology) different forms of graphene nanosheets as an interphase Based on the empirical conExperimental validation and in fiber reinforced polymer stitution of aluminium foams, demonstration of a Complete The main focus of this study composite and evaluate its ef- the foam’s dynamic plateau Process Model, for LCM was to analyze the effect of fect on interfacial properties. stress and densified strain processing of complex aircraft processing parameters on the can be predicted according to structures, which focuses on tensile properties of Manicaria their deformation. the relationship between fab- fabric/PLA bio-composite ric draping and resin infusion. lamina using the Taguchi Method.
Monday 20 July · Scientific Meeting room 5 1311 Textile-Based Composites and Fibre Architecture 3 1311-1 MODELING AND SIMULATION OF THE FORMING OF CONTINUOUS FIBER REINFORCED THERMOPLASTIC COMPOSITES Anton Rusanov (INSA Lyon), Eduardo GuzmanMaldonado (INSA Lyon), Nahiene Hamila (INSA Lyon), Philippe Boisse (INSA Lyon)
1311-2 NUMERICAL PERMEABILITY PREDICTIONS OF WOVEN TEXTILES: EXAMINING THE CHARACTERISTICS OF MULTI-LAYER PREFORMS Elinor Swery (The University of Auckland), Piaras Kelly (The University of Auckland), Tom Allen (The University of Auckland), Simon Bickerton (The University of Auckland) An automated tool has been developed for generation of permeability predictions. It has been used to study the effects of numerous parameters on permeability and has been verified experimentally.
Meeting room 6 Meeting room 7 1312 Graphene, Graphene- 1313 X-ray Computed Based Composites 3 Tomography 2
M1 1314 Fracture and Damage Micromechanics 3 1312-1 FAILURE 1313-1 X-RAY CT IMAGE- 1314-1 FAILURE MECHANISMS, BASED MEASUREMENT LOCUS ANALYSIS OF ELECTRICAL AND AND MODELING OF FIBRE-REINFORCED THERMAL CONDUCTIVITY MICROSCOPIC DEFECTS IN COMPOSITES UNDER OF AEROGRAPHITE/EPOXY CFRP LAMINATES COMBINED TRANSVERSE COMPOSITE Akinori Yoshimura (Japan STRESSES THROUGH Swetha Chandrasekaran Aerospace Exploration COMPUTATIONAL (Technische Universität Agency), Shingo Ii (the MICROMECHANICS Hamburg-Harburg), University of Tokyo), Ryohei Taotao Zhang (Beihang Wilfred Liebig (Technische Hosoya (Tokyo University University), Ying Yan Universität Hamburgof Science), Jun Koyanagi (Beihang University) Harburg), Matthias (Tokyo University of Mecklenburg (Technische Science), Toshio Ogasawara a 3-D modified Hashion Universität Hamburg(Japan Aerospace criterion for fibre-reinHarburg), Bodo Fiedler Exploration Agency), Keita forced composites under (Technische Universität Terashima (Japan Aerospace transverse stress state is Hamburg-Harburg), Exploration Agency), Toru proposed through comRainer Adelung (Christian- Kamita (Japan Aerospace putational micromechanic Albrechts-Universität Exploration Agency), Nobuo analysis. zu Kiel), Karl Schulte Takeda (the University of (Technische Universität Tokyo) Hamburg-Harburg) In this paper, the authors Aerographite (AG) is a develop a method to novel hierarchical 3D carbon measure the microscopic nanomaterial which can be defects in CFRP laminates filled with epoxy resin, This from X-ray CT images and results in novel electrical a method to introduce the and fracture toughness effect of the defects to the properties of the composite. finite element method. 1312-2 DEFORMATION OF 1313-2 COMPRESSIBILITY 1314-2 EXPERIMENTAL GRAPHENE OXIDE: FROM OF CHOPPED FIBREAND ANALYTICAL MONOLAYER TO BULK REINFORCED PREPREGS EVALUATION OF FIBERNANOCOMPOSITES DURING COMPRESSION MATRIX INTERFACE Zheling Li (The University MOULDING ADHESION of Manchester), Robert Dimitri Ferré Sentis (Univ. Jay Mahishi (Honda R Young (The University Grenoble Alpes-Lab. & D Americas), Micheal of Manchester), Ian 3SR-F-38000 GrenobleAngelo Osero (Honda R & Kinloch (The University of France), Laurent Orgéas D Americas), Eric Walker Manchester) (Univ. Grenoble Alpes-Lab. (Honda R & D Americas), 3SR-F-38000 GrenobleDuane Detwiler (Honda R & The deformation behaviour France), Pierre Dumont D Americas) of monolayer and multilayer (Univ. Grenoble Alpes-Lab. graphene oxide has been LGP2-F-38000 GrenobleThe paper discusses an investigated using Raman France), Sabine Rolland du effective and efficient test spectroscopy. On this basis, Roscoat (Univ. Grenoble procedure to measure force their reinforcement to Alpes-Lab. 3SR-F-38000 needed to pull fiber from nanocomposites has been Grenoble-France), Mustafa matrix. The experiment discussed. Sager (Plastic Omnium Auto involves pulling 24K, 50K Exterior) carbon fiber tows bonded with the matrix only Compressibility, pore kinetics and kinematics evolution of thermoset prepregs during compression moulding are investigated using a specially designed compression rheometer and X-ray microtomography.
M2 1315 Fracture and Damage - Laminate Scale 3 1315-1 STUDY ON LOAD DISTRIBUTION OF MULTIBOLT COUNTERSUNK COMPOSITE LAMINATE JOINTS Qian Zhang (Beihang University), Songwei Wang (Beihang University), Xiaoquan Cheng (Beihang University), Jiayi Qi (Beihang University), Gaofeng Dong (Beihang University) The tensile performance of a multi-bolt joint of composite laminate with metal plate is analyzed. The effects of pin clearance, bolt torsion moment, height ratio on load distribution are researched.
1315-2 EFFECT OF CONSTRAINT RATIO AND COOLING RATE ON TRANSVERSE CRACKING IN THERMOPLASTIC CROSS-PLY LAMINATES Husam Wafai (King Abdullah University of Science and Technology (KAUST)), Gilles Lubineau (King Abdullah University of Science and Technology (KAUST)), Arief Yudhanto (King Abdullah University of Science and Technology (KAUST)), Matthieu Mulle (King Abdullah University of Science and Technology (KAUST)), Warden Schijve (SABIC), Nikhil Verghese (SABIC Technology Center) In this work we study damage in cross-ply laminates made of impact-resistant Polypropylene Copolymer reinforced with continuous E-glass fibers (GF/PP).
M3 1316 Fracture and Damage - Delamination 3
M5 1318 Joints - Design, Manufacturing and Testing 3 1316-1 EFFECT OF 1317-1 NONLINEAR FINITE 1318-1 REDUCED STACKING SEQUENCE ELEMENT ANALYSIS OF BOLT MODEL USING ON THE FRACTURE FIBER COMPOSITES WITH MULTI-CONNECTED TOUGHNESS AND DIFFERENT PROPERTIES RIGID SURFACES FOR FATIGUE DELAMINATION IN TENSION AND COMPOSITE STRUCTURES PROPAGATION BEHAVIOR COMPRESSION JOINING OF COMPOSITE Jie Wang (Tongji University), Ramzi Askri (Univ. BordeauxLAMINATES UNDER MODE Yi Xiao (Tongji University) I2M-UMR 5295), Christophe I LOADING Bois (Univ. Bordeaux-I2MYu Gong (Beihang This study extended the UMR 5295), Hervé Wargnier University), Libin Zhao constitutive model to that as (Univ. Bordeaux-I2M-UMR (Beihang University), a nonlinear finite element 5295), Julie Lecomte (Univ. Jianyu Zhang (Chongqing analysis tool by writing a Bordeaux-I2M-UMR 5295) University), Stephen Richard UMAT to address two- or Hallett (University of Bristol) three-dimensional finite The development of a elements in ABAQUS. reduced model of bolted joint using Multi-Connected Rigid Surfaces and continuum shell elements for the prediction of both load distribution and stress field around hole.
1316-2 ENHANCING THE INTERLAMINAR FRACTURE RESISTANCE OF LAMINATED COMPOSITES BY USING CONTINUOUS CARBON NANOTUBE FILMS Hong Xu (Suzhou Institute of Nano-Tech and NanoBionics-CAS-China), Xiao Tong (Suzhou Institute of Nano-Tech and NanoBionics-CAS-China), Yongyi Zhang (Suzhou Institute of Nano-Tech and Nano-Bionics-CASChina), Qingwen Li (Suzhou Institute of Nano-Tech and Nano-Bionics-CAS-China), Tsu-Wei Chou (University of Delaware), Weibang Lu (Suzhou Institute of NanoTech and Nano-BionicsCAS-China) A novel method for fabricating continuous CNT film interleaved carbon fiber composites has been developed. This hybrid laminate composite shows better interlaminar properties.
M4 1317 Constitutive Models 3
1317-2 AN ELASTOPLASTIC-DAMAGE CONSTITUTIVE MODEL BASED ON A LARGESTRAIN HYPERELASTIC FORMULATION FOR AMORPHOUS GLASSY POLYMERS Van Dung Nguyen (University of Liège), Xavier Morelle (University of Louvain), Frédéric Lani (University of Louvain), Thomas Pardoen (University of Louvain), Christian Bailly (University of Louvain), Ludovic Noels (University of Liège)
1318-2 HIGHTEMPERATURE HYBRID WELDING OF THERMOPLASTIC (CF/ PEEK) TO THERMOSET (CF/ EPOXY) COMPOSITES Irene Fernandez Villegas (Delft University of Technology), Pablo Vizcaino Rubio (Delft University of Technology)
M6 1319 Applications Aerospace 2 1319-1 CARBON NANOTUBES FOR PROPERTY ENHANCEMENT OF EPOXY AT CRYOGENIC ENVIRONMENTS Alan Kin Tak Lau (The Hong Kong Polytechnic University), Jinsong Leng (Harbin Institute of Technology) In the outer space, composite structures are always subject to cyclic thermal stress in which one surface of the structures facing to the Sun experiences temperature over 393 K while an opposite side
1319-2 PREVENTION OF UVR DEGRADATION ON POLYMER-BASED COMPOSITES BY NANOZNO & HGFS Tsz-Ting Wong (The Hong Kong Polytechnic University), Kin-Tak Lau (The Hong Kong Polytechnic University), Wai-Yin Tam (The Hong Kong Polytechnic University), Jinsong Leng (Harbin Institute of Technology), Julie A. Etches (University of Bristol)
This paper presents an procedure to prevent thermal degradation during welding of CF/PEEK to CF/ epoxy composites based on Effects of nano-ZnO/epoxy a drastical reduction of the rheology and nano-ZnO welding time. particle dispersion on An efficient viscoelasinfiltration condition, UV abtic-viscoplastic-damage sorbability and mechanical constitutive model based on properties of a nano-ZnO/ a large-strain hyperelastic epoxy filled HGF composite. formulation for amorphous polymers in the glassy state
programme
M7 1320 Applications Automotive and Rail 2
M8 1321 Multifunctional Composites - Energy Storage and Harvesting 3 1320-1 ANALYSIS OF 1321-1 HIGH STRENGTH APPLICATION OF HYBRID MULTIFUNCTIONAL MATERIAL ON A SILL STRUCTURAL BATTERY Josef Oleksik (TUBASED ON SOLID-STATE Braunschweig) G-CNT CARBON FIBER HYBRID COMPOSITES This article discusses the Mi-Young Park (KAIST), possibilities and characters Jung-Yup Lim (Yonsei of using hybrid material on University), Jong-Hak Kim a sill aiming to increase the (Yonsei University), Chunstiffness and to decrease Gon Kim (KAIST) the weight. High strength multifunctional structural battery based on solid-state G-CNT carbon fiber hybrid composites was successfully fabricated and experimented for electrical and structural study.
1320-2 USERRELATED METHODICAL DEVELOPMENT OF COST OPTIMISED CFRP INTERIOR COMPONENTS FOR DERIVATIVES OF LUXURY CARS Jonathan Schmidt (RWTH Aachen University), Liliane Ngahane Nana (RWTH Aachen University), Zhuzhell Montano (RWTH Aachen University), Anna-Lena Beger (RWTH Aachen University), Jörg Feldhusen (RWTH Aachen University), Dave Cadwell (BENTLEY MOTORS LIMITED)
1321-2 SYNTHESIS OF CU-DOPED VANADIUM OXIDE/GRAPHENE HYBRID MATERIAL FOR HIGH PERFORMANCE ELECTROCHEMICAL CAPACITOR Xiaoran Zhao (Beihang University), Yan Zhao (Beihang University), Ye Li (Beihang University), Xiaoyan Zhang (Beijing Institute of Aeronautical Materials), Shanyi Du (Beihang University)
Cu-doped vanadium oxide/ graphene electrode material has been successfully Developed design process synthesized by one-step that tries to give the engihydrothermal technology neer a tool to support and and excellent electrochemstructure his work. It is a ical properties have been very simplified and authen- obtained. tic try to illustrate such a complex thing like a CFRP design.
45
Scientific programme · Monday 20 July Congress Hall A 17:20 1301-3 MECHANICAL PROPERTIES OF CFRP PIPES MADE BY MULTI FILAMENT WINDING METHOD (MFW) Takehiko Hyodo (Sumitomo Rubber Industories), Yumi Kanemitsu (Sumitomo Rubber Industories), Tadashi Uozumi (Gifu University Composite Materials Center), Akio Ohtani (Gifu University Composite Materials Center), Asami Nakai (Gifu University)
Auditorium 10 1303-3 LOCALIZED DAMAGE DETECTION AND STRAIN MEASUREMENT IN LAMINATED COMPOSITE MATERIALS USING INTEGRATED CARBON NANOTUBE YARN SENSORS Jandro Abot (The Catholic University of America), Kevin Wynter (The Catholic University of America), Samuel Mortin (The Catholic University of America), Huy Conductive polymer comLe (The Catholic University We investigated the Multiposites (CPC) with hybrid of America), Hugo Borges Filament-Winding method by polymers and fillers are inves- de Quadros (The Catholic applying a tensile load to car- tigated for their pyro-resistive University of America), Victor bon fibers and we confirmed properties. Pyro-resistive Casarotto (The Catholic that it is possible to produce properties increased upon ad- University of America) CFRP pipes that are superior dition of hybrid polymer/filler to those by SW method. Piezoresistive characteristic of carbon nanotube yarns is tapped to detect damage and measure strain in laminated composite materials through resistance measurements without altering their integrity.
17:40 1301-4 FUSED DEPOSITION TECHNOLOGY APPLIED TO THERMOPLASTIC MATRIX PLACEMENT AND WETOUT IN FILAMENT WINDING Donald Radford (Colorado State University), Kevin Hedin (Colorado State University) Glass fiber/PET composites are filament wound using an integrated fused deposition 3D printhead to wetout the fibers. The properties compare favorably to filament wound commingled tow composites.
46
Auditorium 15 1302-3 HYBRID CONDUCTIVE POLYMER COMPOSITES: THE EFFECT OF MIXED FILLERS AND POLYMER BLENDS ON PYRORESISTIVE PROPERTIES. Eric Asare (Queen Mary University of London), Jamie Evans (LMK Thermosafe Ltd), Emiliano Bilotti (Queen Mary University of London), Mark Newton (LMK Thermosafe Ltd)
1302-4 ULTRADRAWING OF NANODIAMOND REINFORCED POLY (VINYL ALCOHOL) NANOCOMPOSITE FIBERS Seira Morimune-Moriya (Kobe University), Yuya Fujita (Kobe University), Masaru Kotera (Kobe University), Kimiya Goto (Bando Chem. Ind.-Ltd.), Katsuhiko Hata (Bando Chem. Ind.-Ltd.), Takashi Nishino (Kobe University)
1303-4 THE MICROWAVE ACTUATED SHAPE MEMORY POLYMER FILLED WITH T-ZNOW Zhihong Xu (Nanjing University of Science and Technology)
Auditorium 11 1304-3 MASTER SN CURVE APPROACH- A HYBRID MULTISCALE APPROACH TO FATIGUE SIMULATION OF SHORT FIBER COMPOSITES Atul Jain (KULeuven), Yasmine Abdin (KULeuven), Stefan Straesser (Siemens Industry Software NV), Wim Van Paepegem (Ghent University), Ignaas Verpoest (KULeuven), Stepan V. Lomov (KULeuven)
Auditorium 12 1305-3 EFFECT OF THE DESIGN GUIDELINES ON THE DESIGN SPACE Thiago Dutra (Instituto Tecnologico de Aeronautica), Clovis Ferreira (Embraer), Sergio Almeida (Instituto Tecnologico de Aeronautica)
Meeting room 18 1306-2 CHARACTERIZATION AND NUMERICAL INVESTIGATION OF AN RTM CURE PROCESS WITH CFRP MOLDS AND INDEPENDENT HEAT PATCHES Jakob Weiland (Institute for Carbon Composites), Mathias Hartmann (Institute for The boundaries of the feasible Carbon Composites), Roland region of lamination parame- Hinterhölzl (Institute for ters when design guidelines Carbon Composites) is discussed. Laminate daA hybrid multi-scale method tabases were generated and A numerical strategy for cure to predict the local SN curves filtered according the desired simulation of an RTM manof SFRC is proposed; this pro- design guideline. ufacturing process utilizing posed method which involves CFRP molds with temperature both multiscale-mechanics controlled heat patches has and tests is validated by been developed and validated. experiments.
Meeting room 19 1307-3 STOCHASTIC SIMULATION OF THE CURE OF ADVANCED COMPOSITES Alex Skordos (Cranfield University, Cranfield, United Kingdom), Tassos Mesogitis (Cranfield University, Cranfield, United Kingdom), Andrew Long (Nottingham University, Nottingham, United Kingdom) A stochastic simulation methodology is developed to investigate the effects of cure kinetics, in plane fibre misalignment and boundary conditions uncertainty on the cure process of composites.
Meeting room 20 1308-3 FATIGUE BEHAVIOR OF UNI-DIRECTIONAL FLAX FIBRE/EPOXY COMPOSITES Yosuke Ueki (Hitachi LTD), Hans Lilholt (Technical University of Denmark), Bo Madsen (Technical University of Denmark)
Meeting room 17 1309-3 WETTING BEHAVIOUR OF MOLTEN THERMOPLASTICS: EFFECT OF PHYSICAL AND CHEMICAL INTERACTIONS ON THE MECHANICAL PROPERTIES OF GLASS FIBRE-THERMOPLASTIC COMPOSITE INTERFACES Fatigue behaviour of a uni-di- Carlos Fuentes (KU Leuven), rectional flax-epoxy compos- Els Van Santfoort (GroepTite was investigated. Results Leuven Engineering College), indicated that the failure Haoyu Guo (GroepT-Leuven criteria was determined by Engineering College), Christine not only the fatigue damaging Dupont-Gillain (Université but also the creep strain. Catholique de LouvainLouvain-la-Neuve), David Seveno (KU Leuven), Aart Van Vuure (KU Leuven) Surface interactions and interface compatibility between PP, MAPP, and PVDF with glass substrates were evaluated, at room (20°C) and high temperature (200°C).
1304-4 DELAMINATION FATIGUE PROPERTIES OF Z-PINNED CARBON-EPOXY LAMINATE USING METAL OR COMPOSITE RODS Fabio Pegorin (RMIT University), Khomkrit Pingkarawat (RMIT University), Stephen Daynes (RMIT University), Adrian Mouritz (RMIT University)
The absorbed microwave energy could be transferred into heat efficiently in the T-ZnOw/SMP composite and the remote actuation of complex shape transitions by Fabio Pegorin is a Doctoral microwave is possible. candidate in Aerospace ND reinforced PVA nanocomEngineering at RMIT posite fibers were prepared University. His Ph.D aims to through gel process followed create a multi-functional comby uniaxial drawing. The exposite material for aerospace cellent mechanical properties structure using z-pinning of the drawn nanocomposite technique. fibers were revealed.
1305-4 A PARAMETERIZED SURFACE METHOD TO DETERMINE OPTIMAL VARIABLE STIFFNESS LAYUP DESIGN BY GLOBAL SEARCH Simon Hesse (BMW AG. & Technische Universität München), Anna Arsenyeva (Technische Universität München), Dirk Lukaszewicz (BMW Group), Fabian Duddeck (Technische Universität München)
1306-3 EFFECTS ON FORMING WHEN USING ALIGNED MULTI WALL CARBON NANOTUBES IN MULTI-STACKED PREPREG Per Hallander (Saab AB), Jens Sjölander (Royal Institute of Technology), Malin Åkermo (Royal Institute of Technology)
The aim of this study was to show how locally arranged MWCNTs in prepreg interlayers affect the global forming Variable Stiffness laminates behavior. The study shows are optimized by using that MWCNT in the [0]/[45] bi-variate spline surfaces with interfaces affects wrinkling. a small number of control points. Our example showes a significant increase of the buckling load for a curved panel.
1307-4 MONOLITHIC STOKES/DARCY FLUID FORMULATION IN DEFORMABLE MEDIA FOR THE SIMULATION OF RESIN-INFUSION BASED PROCESSES Maxime Blais (Ecole des mines de Saint-Etienne), Nicolas Moulin (Ecole des mines de Saint-Etienne), Pierre-Jacques Liotier (Ecole des mines de Saint-Etienne), Julien Bruchon (Ecole des mines de Saint-Etienne), Sylvain Drapier (Ecole des mines de Saint-Etienne) Based on a monolithic StokesDarcy formulation coupled with a solid mechanics problem, this study describes a numerical approach for the simulation of composite parts made by infusion processes.
1308-4 VISCOSE RAYON FIBRES: A POTENTIAL ADDITION TO THE TECHNICAL FIBRES FAMILY? Jonathon Chard (University of Surrey), Gavin Creech (Scott Bader), David Jesson (University of Surrey), Paul Smith (University of Surrey)
1309-4 EFFECTS OF TESTING TEMPERATURE ON INTERFACIAL SHEAR STRENGTH MEASUREMENTS OF EPOXY RESINS AT DIFFERENT MIXING RATIOS Helga Nørgaard Petersen (Technical University of Denmark), Ross Minty (University of Strathclyde Viscose rayon fibres have the ), James L. Thomason potential to bridge the gap be- (University of Strathclyde), tween natural (in this context Povl Brøndsted (Technical plant derived) and technical University of Denmark), fibres. Data from mechanical Yukihiro Kusano (Technical tests are prestented. University of Denmark), Kristoffer Almdal (Technical University of Denmark) The interfacial shear stress of a glass fibre and epoxy matrix system was investigated. An inverse dependency of testing temperature and mixing ratio of hardener and epoxy resin was found.
Meeting room 16 1310-3 STATIC AND DYNAMIC RESPONSE OF NOVEL ANISOTROPIC COMPOSITE FOAM CONCEPT FOR PROTECTIVE HELMETS Yasmine Mosleh (KU Leuven), Bart Depreitere (KU Leuven), Jos Vander Sloten (KU Leuven), Jan Ivens (KU Leuven) In this paper, a new anisotropic material concept namely composite foam is proposed as an alternative to next generation helmet liners which can potentially reduce head rotational accelerations.
Monday 20 July · Scientific Meeting room 5 1311-3 DOES UNIT CELL SIZE PLAY A ROLE? AN OVERVIEW OF MECHANICAL PROPERTIES OF WOVEN LAMINATES Mireia Olave (IK4-IKERLAN), Igor Vara (IK4-IKERLAN), Hodei Usabiaga (IK4IKERLAN), Laurentzi Aretxabaleta (Mondragon Unibertsitatea), Stepan V. Lomov (KU Leuven), Dirk Vandepitte (KU Leuven) The unit cell size effect of woven laminates for different mechanical properties is investigated: tensile strength, damage, static mode I/II and fatigue mode I fracture toughness values are analyzed.
1311-4 EFFECT OF THE NUMBER OF LAMINATIONS ON BENDING AND TRANSVERSE SHEAR PROPERTIES OF PLAIN WEAVE FABRIC COMPOSITE LAMINATES Keishiro Yoshida (Kanazawa Institute of Technology), Motohiro Nakagami (Kanazawa Institute of Technology), Yasuo Hirose (Kanazawa Institute of Technology) Bending stiffness and transverse shear stiffness of plain weave fabric composite laminates are investigated considering the intra-lamina inhomogeneity through finite element analysis.
Meeting room 6 1312-3 THREEDIMENSIONAL GRAPHENE FOAM/CNT/PDMS COMPOSITES WITH EXCEPTIONAL MICROWAVE AND NOISE SHIELDING Xinying Sun (The Hong Kong University of Science and Technology), Xu Liu (The Hong Kong University of Science and Technology), Xiuyi Lin (The Hong Kong University of Science and Technology), Xi Shen (The Hong Kong University of Science and Technology), Ying Wu (The Hong Kong University of Science and Technology), Zhenyu Wang (The Hong Kong University of Science and Technology), Gang Liu (Xi’an Jiaotong University), Jang-Kyo Kim (The Hong Kong University of Science and Technology) This paper reports novel GF/ CNT/PDMS hybrid composites with different porosities, densities and CNT contents for both high EMI shielding and sound absorption performances. 1312-4 FACILE SYNTHESIS OF GRAPHENE SURFACE-MODIFIED FLAKE ALUMINUM POWDER WITH LOW INFRARED EMISSIVITY AND EXCELLENT ANTICORROSIVE PERFORMANCE Lihua He (Beijing Institute of Aeronautical Materials), Pinggui Liu (Beijing Institute of Aeronautical Materials), Yan Zhao (Beihang University), Youwei Zhang (Beijing Institute of Aeronautical Materials), Wen Luo (Beijing Institute of Aeronautical Materials), Tong Zhang (Beijing Institute of Aeronautical Materials) GO was firstly functionalized with -PO(OH)2, and then reacted with Al to obtain graphene-modified Al powder, which was efficient in preparing lower infrared emissivity and anticorrosive coating.
Meeting room 7 1313-3 EFFECTIVE MECHANICAL PROPERTIES OF A WELD LINE IN A SHORT GLASS FIBRE REINFORCED POLYAMIDE 66 BASED ON X-RAY MICRO-TOMOGRAPHY AND FINITE ELEMENT COMPUTATION Abderrahmane Ayadi (Mines Douai), Hedi Nouri (Mines Douai), Sofiane Guessasma (INRA), Frederic Roger (Mines Douai)
M1 1314-3 ACOUSTIC EMISSION ANALYSIS FOR VALIDATION OF MICRO MECHANICAL MODELS Fatih Oz (Bogazici University), Nuri Ersoy (Bogazici University)
M2 1315-3 A PROGRESSIVE FAILURE MODEL FOR COMPOSITE LAMINATES INCLUDING MATRIX CRACKS INTERNAL TRACTION Mahdi Salavatian (Washington State A comparison between the University), Lloyd Smith predictions of finite element (Washington State micromechanical analysis University) and results of tension tests with acoustic emission This paper concerns the recording for a carbon shear modulus reduction fibre reinforced composite due to transverse cracks. X-Ray micro-tomography is material. The effect of crack closure combined with a two-scale in the transverse and shear finite element computational response of the laminates method to quantify the local was incorporated in the anisotropic elastic properdamage model. ties within a hot weldline.
1314-4 MICROMECHANICAL INVESTIGATION OF THE INFLUENCE OF PLY THICKNESS ON FIBRE MATRIX DEBONDING Christian Leopold (Technical University HamburgHarburg), Wilfried Liebig (Technical University Hamburg-Harburg), Bodo Fiedler (Technical University Hamburg-Harburg)
1315-4 ANALYSIS OF BENDING STIFFNESS REDUCTION IN LAMINATES DUE TO TRANSVERSE CRACKS AND DELAMINATIONS IN SURFACE LAYERS Andrejs Pupurs (Luleå University of Technology), Mohamed Loukil (Swerea SICOMP), Fredrik Ahlqvist (Swerea SICOMP), David Mattsson (Swerea SICOMP)
M3 1316-3 ENF TEST SIMULATION OF STITCHED COMPOSITES BASED ON SHEAR TESTING RESULTS OF SINGLE STITCHED LAMINATES Jonny Herwan (Tokyo Metropolitan University), Atsushi Kondo (Tokyo Metropolitan University), Satoshi Morooka (Tokyo Metropolitan University), Naoyuki Watanabe (Tokyo Metropolitan University)
M4 1317-3 NONLINEAR DYNAMIC CONSTITUTIVE MODEL FOR CARBON/ EPOXY TEXTILE COMPOSITES Xing Liu (Vrije Universiteit Brussel), Lincy Pyl (Vrije Universiteit Brussel), Danny Van Hemelrijck (Vrije Universiteit Brussel), Wim Van Paepegem (Ghent University), Laszlo Farkas (Siemens Industry Software NV)
End notch flexural (ENF) test simulation was developed based on single stitch testing, combined with cohesive zone model to facilitate crack propagation. FE results agreed well with the experiment.
A constitutive model describing the behaviours (elastic fibers and viscoelastic matrix) of textile composites is presented in this paper and verified in a quasi-static loading case from literature.
1316-4 MODE I FRACTURE OF THIN-PLY CARBONEPOXY LAMINATES: EFFECTS OF PLY THICKNESS Guillaume Frossard (Ecole polythechnique fédérale de Lausanne (EPFL)), Joël Cugnoni (Ecole polythechnique fédérale de Lausanne (EPFL)), Thomas Gmür (Ecole polythechnique fédérale de Lausanne (EPFL)), John Botsis (Ecole polythechnique fédérale de Lausanne (EPFL))
1317-4 MICROMECHANICAL MODELING OF CERAMICSBASED COMPOSITES VIA VORONOI-DELAUNAY NETWORKS Khalid Alzebdeh (Sultan Qaboos University), Uwe Kruger (Rensselaer Polytechnic Institute)
M5 1318-3 INFLUENCE OF THE PIN SIZE ON THE TENSILE AND FATIGUE BEHAVIOR OF TI-CFRP HYBRID STRUCTURES PRODUCED BY LASER ADDITIVE MANUFACTURING Daniel Huelsbusch (TU Dortmund University), Matthias Haack (TU Dortmund University), Andreas Solbach (Hamburg University of Technology), Claus Emmelmann (Laser Zentrum Nord GmbH), Frank Walther (TU Dortmund University) Quasi-static and cyclic investigations were carried out in order to assess the influence of additive-manufactured pin structures on the mechanical properties of a novel hybrid structure interface.
1318-4 EVALUATION OF AN ANALYTICAL ANALYSIS METHOD FOR INTERFERENCE FIT ASSEMBLIES FOCUSING ON THICK-WALLED PARTS BASED ON EXPERIMENTAL DATA Philipp Fahr (Technische Universität München-Faculty of Mechanical Engineering), Roland Hinterhoelzl (Technische Universität München-Faculty of Mechanical Engineering)
Using a discrete modeling, we utilize Voronoi tessellation to simulate random The influence of ply Bending stiffness of lamimicrostructure of 2D cethickness in the 90° layer nates with micro-damage ramics-based composites. in cross-ply laminates on was measured experimenStatistics on elastic moduli The assembly process of infibre matrix debonding tally. DIC was used to meas- The ply thickness influences are calculated via numerical terference fit assemblies of and inter-fibre-fracture is ure the mid-plane curvature. the steady-state ERR in simulations. CFRP shafts and steel hubs investigated experimentally Results yielded excellent mode I fracture of caris investigated experimenwith model composites and agreement with FEM and bon-epoxy laminates. The tally and analytically. The in FEM simulation. analytical models. difference of microstructure applicability of an analytical affects the amount of bridgapproach is evaluated. ing fibres, which leads to this size effect.
M6 1319-3 STRUCTURAL ROBUSTNESS ANALYSIS OF ANISOGRID COMPOSITE LATTICE STRUCTURES Ronald Wagner (German Aerospace Centre), Steffen Niemann (German Aerospace Centre), Christian Hühne (German Aerospace Centre)
programme
M7 1320-3 THE EFFECTS OF COST AND WEIGHT EFFICIENT STRUCTURAL DESIGN FOR MANUFACTURING OF COMPOSITE AUTOMOTIVE BODY STRUCTURES Per Mårtensson (Royal institute of technology), Dan Zenkert (Royal institute of technology), Malin Åkermo The purpose of this paper (Royal institute of techis to compare the structural nology) robustness of anisogrid composite lattice structures An analysis of the effects with orthogrid composite when dividing a composite structures when subjected structure to improve the to axial compression. cost effeciency of manufacturing. Cost and weight impact is investigated by finite element analysis and a cost model.
M8 1321-3 CERAMIC-METAL HYBRID PARTICLES AS FILLERS LEADING TO ENHANCED DIELECTRIC PERFORMANCE OF THE POLYMERIC COMPOSITES Shuhui Yu (Shenzhen Institutes of Advanced Technology-Chinese Academy of Sciences), Suibin Luo (Shenzhen Institutes of Advanced Technology-Chinese Academy of Sciences), Fang Fang (Shenzhen Institutes of Advanced Technology-Chinese Academy of Sciences), Rong Sun (Shenzhen Institutes of Advanced TechnologyChinese Academy of Sciences) Hybrid particles of Nano Ag-depositing on BaTiO3 were prepared, which as fillers lead to high dielectric constant (235) and low dielectric loss (0.11) of the polymeric composites.
1320-4 DESIGN OPTIMIZATION OF A BOGIE STRUCTURE FOR A TRADE-OFF BETWEEN PROCESSING TIME AND STRUCTURAL PROPERTY Moo Sun Kim (Korea Railroad Research Institute), Jeongseok Kim (Korea Railroad Research Institute), Seung Mo Kim (Korea university of technology and education)
1321-4 3D ORDERED GERMANIUM BASED COMPOSITE AND ITS ELECTROCHEMICAL PROPERTIES Jiupeng Zhao (Harbin Institute of Technology), Yao Li (Harbin Institute of Technology), Jian Hao (Harbin Institute of Technology)
The optimal product design (thickness design) plan for train bogie frame was suggested to consider processing time of RTM process, weight and mechanical properties.
47
Scientific programme · Tuesday 21 July Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 Meeting room 19 8:30 PLENARY: High resolution computed tomography studies of composite materials: The data rich mechanics opportunity S. Mark Spearing, University of Southampton, United Kingdom 9:30 Mini Oral Session I in Congress Hall A2 - see detailed programme page 22. 9:30 Programme number = poster id
9:50
Meeting room 20
Meeting room 17
M8 2121 Special Symposium on Active Composites 2121-1 Opening Remarks B.-L. (“Les”) Lee
2121-2 Avian Inspired Multifunctional Morphing Vehicles: Critical Issues Daniel Inman
10:10
2121-3 Sensory Systems and Flight Stability of Birds Graham Taylor
10:30
2121-4 Power and Energy Issues for Morphing Wings Hugh Bruck
11:00 Poster Session in the Exhibition 12:00 Lunch in the Exhibition 13:00 Mini Oral Session II in Congress Hall A2 - see detailed programme page 22. 13:00 Programme number = poster id
2321 Special Symposium on Active Composites 2321-1 Multifunctional Skin Material for Morphing Leading Edge Applications Hans Peter Monner
13:20
2321-2 Bio-Inspired Materials That Self-Shape Through Programmed Microstructures Andre Studart
14:10 Poster Session in the Exhibition
2521 Special Symposium on Active Composites 2521-1 Co-Continuous Metal-Elastomer Foam Actuators for Morphing Wing MAVs Robert Shepherd
14:50
15:10
48
2521-2 Intelligent CNT Composite Network: The Neurons for MAV Musculoskeletal System Yong Chen
Tuesday 21 July · Scientific
programme
49
Scientific programme · Tuesday 21 July Congress Hall A Auditorium 15 2102 Nano Composites 4 15:00 2101 Processing Manufacturing Technology 4
Auditorium 11 2104 Fatigue 4
Auditorium 12 2105 Structural Analysis and Optimization 4
Meeting room 18 2106 Process Induced Effects 3
Meeting room 19 2107 Process Modelling 4
Meeting room 20 2108 Biocomposites 4
Meeting room 17 2109 Interfaces and Interphases 4
15:00 2101-1 AN INVESTIGATION OF EXPERIENCED PERSON IN HAND LAY-UP FABRICATION METHOD - CONVERTING TACIT KNOWLEDGE TO EXPLICIT IN THE FIBER REINFORCED PLASTICS MOLDINGTetsuo KIKUCHI (Toyugiken Co.-Ltd.-Kanagawa), Erika SUZUKI (Toyugiken Co.-Ltd.), Yuka TAKAI (Osaka Sangyo University), Akihiko GOTO (Osaka Sangyo University), Hiroyuki HAMADA (Kyoto Institute of Technology)
2104-1 THE FATIGUE OF CARBON FIBRE COMPOSITES CONTAINING INTERLAMINAR INKJET PRINTED POLYMER DROPLETS Andrew Cartledge (The University of Sheffield), Christophe Pinna (The University of Sheffield), Alma Hodzic (The University of Sheffield), Patrick Smith (The University of Sheffield)
KEYNOTE
2106-1 THICK-WALLED “CRACK-FREE” CFRP PIPES USING NOVEL STRESS REDUCTION METHOD Kazunori Takagaki (The University of Tokyo), Shu Minakuchi (The University of Tokyo)
2107-1 A RATE-TYPE CRYSTALLIZATION KINETICS MODEL FOR PROCESS MODELLING OF PEEK AND PEEK MATRIX COMPOSITES Kamyar Gordnian (The University of British Columbia), Anoush Poursartip (The University of British Columbia)
2108-1 RESIDUAL PROPERTIES AND DAMAGE EVOLUTION OF FLAX-EPOXY COMPOSITES SUBJECTED TO FATIGUE LOADING Farida Bensadoun (KU Leuven), Ignaas Verpoest (KU Leuven), Aart Willem Van Vuure (KU Leuven)
2109-1 APPLICATION OF ATMOSPHERIC PLASMA TREATMENTS TO ENHANCE THE MECHANICAL PROPERTIES OF UNSIZED CARBON FIBRE /EPOXY COMPOSITES Kate O’Flynn (University College Dublin), Denis Dowling (Dublin)
2106-2 EFFECT OF BUCKLES MESOSCOPIC DEFECTS ON THE COMPOSITE PROPERTIES Samir Allaoui (Orleans University), Madjid Haddad (UTC), Romain Agogue (ONERA), Kamel Khellil (UTC), Gilles hivet (Orleans University), Pierre Beauchene (ONERA), Zoheir Aboura (UTC)
2107-2 ADVANCED 3D FINITE ELEMENT SIMULATION OF THERMOPLASTIC COMPOSITE INDUCTION WELDING Miro Duhovic (Institut für Verbundwerkstoffe GmbH-Erwin-SchrödingerStr.-Gebäude 58 ), Pierre L’Eplattenier (Livermore Software Technology Corporation-7374 Las Positas Road), Inaki Caldichoury (Livermore Software Technology Corporation-7374 Las Positas Road), Joachim Hausmann (Institut für Verbundwerkstoffe GmbHErwin-Schrödinger-Str.Gebäude 58)
2108-2 CALCIUM PHOSPHATE CEMENT REINFORCED WITH NATURAL CELLULOSIC FIBERS FROM DIFFERENT SOURCES Pierre Leuret (Université de Nantes), Franck Tancret (Université de Nantes), Paul Pilet (Laboratoire d’ingénierie osteoarticulaire et dentaire), Jean-Michel Bouler (université de Nantes), Bruno Bujoli (université de Nantes)
2109-2 FUNCTIONALISATION OF CARBON FIBRE SURFACES FOR ENHANCED FIBRE/MATRIX ADHESION Linden Servinis (Deakin University), Luke Henderson (Deakin University), Bronwyn Fox (Deakin University), Mickey Huson (CSIRO), Thomas Gengenbach (CSIRO)
This study investigated the relation between the pressure force applied by the operator when using a roller for fabrication work and the degree of proficiency in the hand lay up fabrication method.
15:20 2101-2 COST AND WEIGHT EFFICIENT ASSEMBLY OF AERONAUTICAL COMPOSITE STRUCTURES Mathilda Karlsson Hagnell (Lightweight structures), Malin Åkermo (Lightweight structures) This research discusses cost implications and trends of a generic wing box with regards to integration and mechanical assembly. Costs are defined using a previously developed cost estimation model.
Auditorium 10 2103 Multifunctional Composites - Sensing and Actuation 4 2102-1 REACTIVE 2103-1 COMPARATIVE SYNTHESIS: A PROMISING STUDY ON MONITORING ROUTE FOR THE IN-SITU STRUCTURAL DEFECTS IN FORMATION OF NANOSIZED FRPS USING GLASS FIBRES REINFORCEMENTS IN METAL WITH CARBON NANOTUBES MATRIX COMPOSITES AND GRAPHENE COATING Nassim Samer (University Bin HAO (The Xinjiang Lyon 1), Jérôme Andrieux Technical Institute of Physics (University Lyon 1), Bruno and Chemistry-Chinese Gardiola (University Lyon Academy of Sciences), Peng1), Sophie Gourdet (Airbus Cheng MA (The Xinjiang Group Innovations), Olivier Technical Institute of Physics Martin (Mecachrome), Hiroki and Chemistry-Chinese Kurita (CEA-Saclay), Laurent Academy of Sciences) Chaffron (CEA-Saclay), Olivier Dezellus (University Lyon 1) This paper studied the structural defects in composites by The present paper describes monitoring the deformation a new in-situ synthesis route of glass fibers with CNTs of MMCs leading to enhanced or graphene coating and mechanical properties and compared the different effects to nanosized reinforcement between them. without handling of nanosized particles.
2102-2 APPLICATION OF THE EMBEDDED ELEMENT TECHNIQUE TO THE MODELLING OF NANO-ENGINEERED FIBERREINFORCED COMPOSITES Anna Matveeva (KU Leuven), Valentin Romanov (KU Leuven), Stepan Lomov (KU Leuven), Larissa Gorbatikh (KU Leuven)
2103-2 HYDROGEL CORE FLEXIBLE MATRIX COMPOSITE (H-FMC) ACTUATORS Michael Dicker (University of Bristol), Paul Weaver (University of Bristol), Ian Bond (University of Bristol), Jonathan Rossiter (University of Bristol), Charl Faul (University of Bristol)
The Embedded Element technique is applied to model fiber-reinforced composites with carbon nanotubes. Its advantages and limitations for micro-stress analysis are discussed.
H-FMC actuators are muscle-like devices powered by soft, pH-responsive hydrogels. This presentation explores how anisotropic composites and hydrogel micro-structure effect H-FMC performance.
A study of the addition of interlaminar inkjet printed polymer droplets upon the fatigue life of unidirectional carbon fibre composites in 4 point bending
2104-2 A STUDY ON THE BIAXIAL FATIGUE OF E-GLASS/EPOXY LAMINATES UNDER NORMAL AND SHEAR LOADINGS Pankaj Mallick (University of Michigan-Dearborn), Raghuram Mandapati (University of MichiganDearborn) Fatigue behavior of a fiber reinforced polymer laminate under a combination of normal and shear stresses is determined. The role of shear stress on biaxial fatigue life is demonstrated.
2110-1 EFFECT OF RELATIVE DENSITY ON SHOCK WAVE 2105-1 RECENT SPEED OF CELLULAR DEVELOPMENTS OF MATERIAL UNDER DYNAMIC DISCRETE MATERIAL IMPACT OPTIMIZATION OF Shilong Wang (University LAMINATED COMPOSITE of Science and Technology STRUCTURES of China), Yuanyuan Ding Erik Lund (Aalborg University), (University of Science René Sørensen (Aalborg Significant radial tensile and Technology of China), University) stress is induced in thickThe present study focuses Changfeng Wang (University walled CFRP pipes. This A rate type modelling apon the characterization of the A number of different atmos- of Science and Technology This presentation will give study proposes a novel stress proach is presented which residual properties of flaxpheric plasma sources are in- of China), Zhijun Zheng a quick summary of recent reduction method using is capable of predicting the epoxy composites subjected vestigated for the treatment of (University of Science and developments of the DMO an asymmetric layup, and degree of crystallinity during to fatigue loading as well as glass and carbon fibres used Technology of China), Jilin approach for structural opti- demonstrates a crack-free processing of carbon fibre re- the damage development. in composites. The aim is to Yu (University of Science and mization of laminated comthick CFRP pipe. inforced PEEK composites. achieve enhanced composite Technology of China) posites including examples mechanical properties. of challenging optimization We investigated the dynamic problems. mechanical behavior of closed-cell metallic foam under high constant-velocity impact and found that the shock wave speed increases linearly with the relative density.
The aim of this study is to evaluate the effect of mesoscopic defects of shaping processes on composite. Specimens with calibrated defects were fabricated and then tested and compared to healthy ones.
The joining of carbon fiber reinforced thermoplastic (CFRTP) composites via electromagnetic (EM) induction welding is studied and simulated using the finite element simulation software LS-DYNA®.
50
Meeting room 16 2110 Foams, Cellular and Lattice Materials 3
Mechanical properties of a novel injectable biomaterial cement for bone defect filling reinforced with natural cellulosic fibers from different sources.
2110-2 THE INFLUENCE OF REDUCING THE CELL SIZE TO THE NANOSCALE ON THE PHYSICAL PROPERTIES OF POLYMERIC NANOCELLULAR FOAMS. Belen Notario (University of Valladolid), Javier Pinto (Istituto Italiano di Tecnologia (IIT)), Miguel Angel Rodriguez Perez (University of Valladolid) The paper demonstrates that reducing the cell size to the nanoscale is a successful strategy to improve several physical properties of cellular polymers.
Tuesday 21 July · Scientific Meeting room 5 2111 Textile-Based Composites and Fibre Architecture 4 2111-1 SIMULATION METHODOLOGY FOR IMPACT DAMAGE AND FAILURE OF AERO-ENGINE COMPONENTS MADE OF TEXTILE COMPOSITES Elena Sitnikova (University of Nottingham), Qing Pan (University of Nottingham), Tian-Hong Yu (University of Nottingham), Weiyi Kong (University of Nottingham), Xiantao Zhao (University of Nottingham), Shuguang Li (University of Nottingham), Richard Brooks (University of Nottingham), Andrew Long (University of Nottingham), Shoufeng Hu (AVIC Commercial Aircraft Engine), Victor Wang (AVIC Commercial Aircraft Engine), Jian Zhang (AVIC Commercial Aircraft Engine) A multi-scale modelling strategy developed for predicting the constitutive behaviour of textile composites under impact loading in aerospace applications.
2111-2 THERMAL CYCLING OF A 3D WOVEN COMPOSITE: IN SITU X-RAY MICROTOMOGRAPHY STUDY AND STRAIN FIELD MEASUREMENTS Yannick Pannier (Institut Pprime), Pascal Doumalin (Institut Pprime), Romain Boijoux (Institut Pprime), Camille Guigon (Institut Pprime), Carole Rakotoarisoa (SNECMA) This work deals with in situ thermal loading of 3D woven polymer composite materials in a synchrotron x-ray micro-tomograph and strain field measurements by digital volume correlation.
Meeting room 6 Meeting room 7 2112 Graphene, Graphene- 2113 X-ray Computed Based Composites 4 Tomography 3
M1 2114 Fracture and Damage Micromechanics 4 2112-1 GRAPHENE 2113-1 FAILURE 2114-1 EXPERIMENTAL WOVEN FABRICS/EPOXY MECHANISMS IN AND NUMERICAL COMPOSITES WITH CENOSPHERE EPOXY ANALYSIS OF THE PEEL EXCEPTIONAL FRACTURE SYNTACTIC FOAMS UNDER FRACTURE ENERGY TOUGHNESS AND UNIAXIAL COMPRESSION BETWEEN ALUMINA MECHANICAL PROPERTIES Ruoxuan Huang (Nanyang CERAMICS AND GLASS Xu Liu (The Hong Kong Technological University), FIBRE-REINFORCED University of Science and Peifeng Li (Nanyang COMPOSITES Technology), Xinying Sun Technological University), Tom Thorvaldsen (The Hong Kong University Tong Liu (Singapore (Norwegian Defence of Science and Technology), Institute of Manufacturing Research Establishment Xiuyi Lin (The Hong Kong Technology) (FFI)), Luiz Kawashita University of Science and (University of Bristol), Technology), Xi Shen (The Syntactic foams have Bernt Brønmo Johnsen Hong Kong University of become attractive in (Norwegian Defence Science and Technology), transpotation applications. Research Establishment Ying Wu (The Hong Kong This work investigated the (FFI)), Tyler Paul Jones University of Science and behaviour and the associ(Norwegian Defence Technology), Zhenyu Wang ated failure mechanisms in Research Establishment (The Hong Kong University syntactic foams subjected to (FFI)), Dennis Bo Rahbek of Science and Technology), uniaxial compression. (Norwegian Defence Jang-Kyo Kim (The Hong Research Establishment Kong University of Science (FFI)) and Technology) The fixed arm peel test and Graphene woven fabric FEM using CZM have been (GWF) is synthesized by employed to investigate the a template-based CVD failure between an alumina method. The GWF/epoxy ceramic and a GFRP comcomposites exhibit excellent posite under quasi-static electrical conductivities, loading. high mechanical properties and fracture toughness. 2112-2 CONTINUUM 2113-2 APPLICATION 2114-2 MODEL FOR GRAPHENEOF X-RAY COMPUTED CHARACTERISATION BASED COMPOSITES MICRO-TOMOGRAPHY TO OF VOIDS AND THEIR Junjun Shang (College of THE STUDY OF DAMAGE INFLUENCE ON DAMAGE Mechanical Engineering AND OXIDATION KINETICS PROPAGATION IN RESIN and Applied Electronics OF THERMOSTRUCTURAL TRANSFER MOULDED Technology -Beijing COMPOSITES CARBON FIBRE University Of Technology), Olivier Caty (LCTS), Mathieu REINFORCED POLYMERS Qingsheng Yang (College Herbreteau (LCTS), Francis Sanjay Sisodia (Uppsala of Mechanical Engineering Rebillat (LCTS), Gérard University), Mark and Applied Electronics Vignoles (LCTS) Mavrogordato (University Technology -Beijing of Southampton), Andrew University Of Technology) In CMC, Weakening pheGeorge (Brigham Young nomena (mechanical and University), Daniel Bull A coarse-grid beam model chemical) are 3D and inside (University of Southampton), of graphene is proposed the material. μCT is thus Mark Spearing (University based on molecular struc- applied to the study of fail- of Southampton), Kristofer tural mechanics approach ure for mechanical loading Gamstedt (Uppsala to simulate graphene-based and to the oxidation of self University) composite. The amount of healing phases. calculation and time cost This study focuses on the are reduced remarkably. formation of voids in resin infused carbon composites and their effect on the damage development to final failure during impact and fatigue using X-ray computed tomography.
M2 2115 Fracture and Damage - Laminate Scale 4 2115-1 NUMERICAL ANALYSIS ON OPEN-HOLE CARBON-FIBRE/EPOXY STITCHED LAMINATES WITH DIFFERENT STITCH ORIENTATION Prabij Joshi (Tokyo Metropolitan University), Satoshi Morooka (Tokyo Metropolitan University), Atsushi Kondo (e-Xtream Engineering-MSC Software Company), Hikaru Hoshi (Japan Aerospace Exploration Agency (JAXA)), Naoyuki Watanabe (Tokyo Metropolitan University)
M5 2118 Joints - Design, Manufacturing and Testing 4 KEYNOTE 2117-1 PROGRESSIVE 2118-1 DOMINANT EFFECT FAILURE ANALYSIS OF OF END DISTANCES ON 2116-1 CARBON/EPOXY FILAMENT GUARDED FAILURE OF CHARACTERIZATION OF WOUND COMPOSITE COMPOSITE BOLTED FATIGUE R-CURVES BASED TUBES UNDER BIAXIAL JOINTS ON GMAX-CONSTANT LOADING Fengrui Liu (Beihang DELAMINATION TESTS IN José Humberto Almeida Jr. University), Jianyu Zhang CF/PEEK LAMINATES (UFRGS - Federal University (China), Libin Zhao (Beihang Masaki Hojo (Kyoto of Rio Grande do Sul), Volnei University) University), Takahira Aoki Tita (Engineering School (The University of Tokyo) of São Carlos - University Influence of end distances of São Paulo), Hugo on failure of composite The true growth law which Faria (INEGI - Institute of double-lap single-bolt joints is not affected by fiber Mechanical Engineering and was studied by tests and bridging was obtained from Industrial Management), PDM analyses. Lateral gaps a series of Gmax-constant António Marques (FEUP between laminates and fatigue tests. Then, the Faculty of Engineering of the intrinsic critical length Lc increase in the crack growth University of Porto), Sandro were discovered. Open-hole woven stitched resistance was evaluated. Amico (UFRGS - Federal laminate showed a good University of Rio Grande agreement with experimendo Sul) tal stress-strain distribution. Meanwhile, stress conA damage model is decentration factor has been veloped for predicts the improved by 14% with lonmechanical behavior of gitudinally than transve composite tubes subjected to internal pressure. Failure in matrix by transverse tensile stress and in-plane shear were noticed.
2115-2 COMPOSITE SANDWICH STRUCTURE WITH A NOTCH IN BENDING/TORSION: TEST AND SIMULATION UP TO RUPTURE Olivier Montagnier (French Air Force), Jean-Paul Charles (CNRS), Gabriel Eyer (CNRS), Christian Hochard (CNRS), Noël Lahellec (CNRS) The aim of this work is to validate experimentally a CDM model for woven materials on a structural part consisting of a large sandwich notched specimen loaded in static bending/ torsion.
M3 2116 Fracture and Damage - Delamination 4
M4 2117 Pressure Vessels and Piping 1
2117-2 A NEW FIBERBUNDLE BASED MODELING APPROACH FOR THE ANALYSIS OF COMPOSITE PRESSURE VESSELS Jörg Multhoff (ISATEC GmbH) A new approach motivated by the tenets of netting analysis and based on a finite element formulation with an embedded fiber-bundle model is being explored.
2118-2 USE OF PIEZOELECTRIC THICK FILM SENSORS TO MEASURE STRESS DISTRIBUTION WITHIN A LAP JOINT Aikaterini Deligianni (Newcastle University ), George Kotsikos (newcastle university), Jack Michael Hale (Newcastle University )
programme
M6 2119 Applications Aerospace 3
M7 2120 Dynamic Fracture 1
2119-1 EVALUATION OF LIGHTNING DAMAGE RESISTANCE OF PANIBASED CONDUCTIVE THERMOSETTING COMPOSITE Yoshiyasu Hirano (Japan Aerospace Exploration Agency), Tomohiro Yokozeki (The University of Tokyo), Teruya Goto (Yamagata University), Tatsuhiro Takahashi (Yamagata University), Danna Qian (Mitsubishi Plastics-Inc.), Shouji Itou (Mitsubishi Plastics-Inc.), Yuichi Ishida (Japan Aerospace Exploration Agency), Toshio Ogasawara (Japan Aerospace Exploration Agency), Masaru Ishibashi (GSI Creos)
2120-1 MODELING HYPERVELOCITY-IMPACT RESPONSE OF CFRP-AL/HC LAMINATE Vaibhav A Phadnis (The University of Sheffield), Vadim Silberschmidt (Loughborough University), Anish Roy (Loughborough University)
M8
A response of a composite structure with CFRP sheets and aluminium-foam core to hypervelocity impact (with velocity up to 1 km/s and projectile radius 3 mm) was studied with a developed 3D FE model.
Newly developed PANIbased conductive thermosetting composite is proposed to improve a lightning damage resistance and their applicability was confirmed with a simulated lightening test.
2119-2 LASER REMOVAL OF RAC COATING FROM COMPOSITE MATERIAL SURFACES Tong Zhang (Beijing Institute of Aeronautical Materials), Yan Zhao (Beihang University), Zhiyong Wang (Beijing Institute of Aeronautical Materials), Pengrui Liu (Beijing Institute of Aeronautical Materials), A novel approach of obtain- Shengrong Xiao (Beijing ing quantitative, interfacial Institute of Aeronautical strength information in Materials) adhesively bonded joints is proposed, using piezocoating removal effects electric thick film sensors of three methods were embedded into the overlap compared, and mechanical area of the bond properties and surface morphology of composite substrate after paint removal processes were tested.
2120-2 STRAIN RATE DEPENDENT TENSILE PROPERTIES OF INJECTION MOLDED LONG GLASS FIBER REINFORCED THERMOPLASTICS Taesung Kim (Waseda University), Yoshihiko Arao (Doshisha University), Norihiko Taniguchi (ASICS Corporation), Tsuyoshi Nishiwaki (ASICS Corporation), Norio Hirayama (NITTO BOSEKI CO.), Atsushi Hosoi (Waseda University), Hiroyuki Kawada (Waseda University) Mechanical properties and strain rate dependency of injection molded long glass fiber reinforced thermoplastics under impact loading were investigated.
51
Scientific programme · Tuesday 21 July Congress Hall A 15:40 2101-3 THE MANUFACTURING ENERGY INTENSITY OF CARBON FIBER REINFORCED POLYMER COMPOSITES AND ITS EFFECT ON LIFE CYCLE ENERGY USE FOR VEHICLE DOOR LIGHTWEIGTING Deborah Sunter (U.S. Department of Energy), Joe Cresko (U.S. Department of Energy)
Meeting room 18 2106-3 A NEW DEVICE FOR THE MEASUREMENT OF DIMENSIONAL VARIATIONS OF ANISOTROPIC COMPOSITE MATERIALS DURING CURE Mael Péron (Laboratoire de Thermocinétique de Nantes - UMR CNRS 6607), Vincent Sobotka (Laboratoire de A method to optimise manu- Thermocinétique de Nantes A powder based prepregging The theory of micro-mechan- facturable variable stiffness - UMR CNRS 6607), Nicolas method was adapted to ics of failure (MMF) is exlaminates is shown and used Boyard (Laboratoire de This paper performs a life engineer composite with tended to analyze the fatigue to study the influence of Thermocinétique de Nantes cycle analysis of the substimatrix heterogeneity. The na- Pre-heat treatment appears to progressive failure and predict manufacturing constraints - UMR CNRS 6607), Steven tution of a conventional steel no-toughened materials have improve stacking interactions the strength for the bolted on performance. Examples Le Corre (Laboratoire de light duty vehicle door with at least 50 vol% fibres and between PDA and MWCNTs joint structures of carbon fibre include buckling and strength Thermocinétique de Nantes a carbon fiber reinforced could be used in structural due to intercalation of reinforced polymer (CFRP) design. UMR CNRS 6607) polymer door for vehicle light- applications. monomers between MWCNT composite. weighting. bundles, improving the elecAn original device measuring trochromic response in these chemical shrinkage and thercomposites. mal expansion coefficients of anisotropic composite materials along in-plane and through-thickness directions during cure is presented.
16:00 2101-4 STUDY ON HYBRID INJECTION MOULDING OF CARBON FIBRE REINFORCED THERMOPLASTIC Masao Tomioka (MITSUBISHI RAYON CO.-LTD.), Takeshi Ishikawa (MITSUBISHI RAYON CO.-LTD.), Tatsuya Tanaka (Dohshisha Univ.)
Auditorium 15 2102-3 HIGH PERFORMANCE NANO AND HIERARCHICAL COMPOSITES Tomi Herceg (Imperial College London), Emile Greenhalgh (Imperial College London), Alexander Bismarck (Imperial College London), Milo Shaffer (Imperial College London), David Anthony (London)
2102-4 ATMOSPHERIC DC PLASMA PROCESSING OF TIO2/PEDOT:PSS NANOCOMPOSITE Dan Sun (Queen’s University Belfast), Yazi Liu (Nanjing University), Sadegh Askari (University of Ulster), Jenish Patel (University of Ulster), Manuel Macias-Montero This study relates to the (University of ulster), Richao hybrid injection moulding. This Zhang (Zhejiang University), paper shows the influences Davide Mariotti (University of the temperature of inserted of Ulster), Paul Maguire and injected materials on the (University of Ulster) adhesion of the insert-injection interface. In this paper, we report the synthesis of core-shell structured TiO2/PEODT:PSS nanocomposites directly processed in aqueous solution using a novel low temperature atmospheric DC microplasma technique.
16:20 Coffee in the Exhibition
52
Auditorium 10 2103-3 HOW HEAT TREATMENT AFFECTS THE CHROMATIC RESPONSE OF CARBON NANOTUBE – POLYDIACETYLENE COMPOSITES TO ELECTRICAL STIMULUS Reinack Hansen (Nanyang Technological University), Jinglei Yang (Nanyang Technological University), Lianxi Zheng (Khalifa University)
2103-4 FIBER REINFORCED COMPOSITES WITH ZINC OXIDE PIEZOELECTRIC NANOWIRES FOR STRUCTURAL HEALTH MONITORING AND ENHANCED INTERLAMINAR STRENGTH Sean Offenberger (Virginia Tech), Ayoub Boroujeni (Virginia Tech), Anahita Emami (Virginia Tech), Marwan AlHaik (Virginia Tech), Michael Philen (Virginia Tech)
Auditorium 11 2104-3 FATIGUE STRENGTH PREDICTION OF BOLTED JOINT STRUCTURES OF CARBON FIBRE REINFORCED POLYMER COMPOSITE BASED ON THE MICROMECHANICS Hongneng Cai (Xi’an Jiaotong University ), Wangnan LI (Xi’an Jiaotong University)
2104-4 CRACKING AND DELAMINATION OF CROSSAND ANGLE-PLY GFRP BENDING SPECIMENS UNDER VERY HIGH CYCLE FATIGUE LOADING Till Julian Adam (Technische Universität Braunschweig), Peter Horst (Technische Universität Braunschweig)
Auditorium 12 2105-2 EFFECT OF STEERING LIMIT CONSTRAINTS ON THE PERFORMANCE OF VARIABLE STIFFNESS LAMINATES Daniël Peeters (Delft University of Technology), Mostafa Abdalla (Delft University of Technology)
2105-3 AN APPROXIMATE ANALYTIC SOLUTION FOR THE STRESSES AND DISPLACEMENTS OF THINWALLED COMPOSITE BEAMS WITH MONO-SYMMETRIC CROSS-SECTIONS SUBJECTED TO BENDING Marko Vukasovic (University of Split-Faculty of Electrical Engineering-Mechanical A high frequency bending test Engineering and Naval rig is used to investigate fa- Architecture), Radoslav tigue of GFRP flat specimens Pavazza (University of in the very high cycle fatigue Split-Faculty of Electrical Fiber reinforced plastics with range. Cracking, delamination Engineering-Mechanical ZnO nanowires is investigated and stiffness degradation is Engineering and Naval for improved mechanical investigated. Architecture) properties and impedance-based SHM. Mechanical An approximate shear and impedance measuredeformable theory of bending ments are performed measure of thin-walled composite effect of ZnO. beams of open mono-symmetrical cross-sections is presented. The stresses and displacement are given in closed analytic form.
2106-4 DETERMINATION OF RESIDUAL STRESSES IN A LAMINATED THERMOSET COMPOSITE USING THE INCREMENTAL SLITTING METHOD Michael Gower (National Physical Laboratory), Richard Shaw (National Physical Laboratory), Louise Wright (National Physical Laboratory), Jeannie Urquhart (National Physical Laboratory), Jon Hughes (National Physical Laboratory), Sam Gnaniah (National Physical Laboratory), Roger Morrell (National Physical Laboratory), Tomasz Gartstka (LMAT-UK Limited) This paper details measurements of ply level residual stresses in [0°2/90°2]4s laminates fabricated from SE84 LV carbon fibre-reinforced epoxy using the incremental slitting approach.
Meeting room 19 2107-3 COMPRESSION MOLDING 3D-CAE OF DISCONTINUOUS LONG FIBER REINFORCED POLYAMIDE 6 - INFLUENCE ON CAVITY FILLING AND DIRECT FIBER SIMULATIONS OF VISCOSITY FITTING METHODS Masatoshi Kobayashi (Honda R&D Co.-Ltd.), Koji Dan (Honda R&D Co.-Ltd.), Tsuyoshi Baba (Honda R&D Co.-Ltd.), Daisuke Urakami (Toray Engineering-Co.)
Meeting room 20 2108-3 INVESTIGATION OF THE BEHAVIOUR OF FLAX FIBRE REINFORCED EPOXY COMPOSITES IN HUMID CONDITIONS Dieter Perremans (KU Leuven), Kevin Hendrickx (KU Leuven), Ignace Verpoest (KU Leuven), Aart Willem Van Vuure (KU Leuven)
For compression molding CAE of L-FRTP, a suitable method of viscosity measurement and equation fitting has been proposed. Cavity filling and direct fiber simulations were examined by the method.
2107-4 MODELLING THE GEOMETRIC VIARIABILITY OF 3D WOVEN GLASS FIBRE FABRIC AND ITS EFFECTS ON PERMEABILITY Xiantao Zhao (University of Nottingham), Andrew Long (University of Nottingham) A 3D woven ply to ply angle interlock glass fabric was characterized with X-ray micro-CT technology, and the influence of geometrical variability on permeability prediction is studied.
Meeting room 17 2109-3 THE INFLUENCE OF A THERMAL AND CORROSIVE TREATMENT ON THE INTERFACE PROPERTIES OF POLYMER/METAL HYBRIDS: ADHESION BEHAVIOUR AND POLYMER DYNAMICS. Marieke Fuellbrandt (Technische Universitaet Berlin-Stranski-Laboratorium für Physikalische und Theoretische Chemie ), Andreas Schoenhals (Bundesanstalt fuer Materialforschung und -pruefung), Regine von Klitzing (Technische Universitaet Berlin-Stranski-Laboratorium für Physikalische und Theoretische Chemie) Polymer/metal hybrids are characterized with regard to their adhesion behaviour and polymer properties before and after corrosion testing down to a (sub)microscopic scale.
2108-4 EFFECT OF THERMAL TREATMENT ON THE INTERFACIAL PROPERTIES OF FLAX FIBERS. Monica Francesca Pucci (Ecole des Mines de SaintEtienne), Pierre-Jacques Liotier (Ecole des Mines de Saint-Etienne), David Seveno (Katholieke Univ Leuven), Carlos Fuentes (Katholieke Univ Leuven), Aart Van Vuure (Katholieke Univ Leuven), Sylvain Drapier (Ecole des Mines de Saint-Etienne) Effect of thermal treatment on the interfacial properties of flax fibers. Elaboration of composites reinforced by treated and untreated fibers. Void and mechanical properties first characterizations.
2109-4 FINITE ELEMENT ANALYSIS OF INTERPHASES PROPERTIES: A CRUCIAL PART IN THE DEGRADATION OF A UD COMPOSITES Lenaik BELEC (University of Toulon), Yoann JOLIFF (University of Toulon), Than Hoi NGUYEN (University of Danang), Jean François CHAILAN (University of Toulon) The evolutions of interphases in a UD composite are characterized during natural tropical ageing. A correlation is made with bending tests which are simulated by FEA on a realistic microstructure.
Meeting room 16 2110-3 RVE MODELLING OF DEFORMATION AND FAILURE BEHAVIOUR OF CLOSED CELL RIGID POLYMER FOAMS Ralf Schlimper (Fraunhofer Institute for Mechanics of Materials IWM), Irene Vecchio (Fraunhofer Institute for Industrial Mathematics ITWM), Katja Schladitz (Fraunhofer Institute for Industrial Mathematics ITWM), Ralf Schaeuble (Fraunhofer Institute for Mechanics of Materials IWM) RVE modelling of PMI foam by 3d random Laguerre tessellation which was adapted to the cell size distribution of the real foam. Experimental investigation by in situ X-ray computed tomography.
Tuesday 21 July · Scientific Meeting room 5 2111-3 DEVELOPMENT OF AN ANALYTICAL MODEL FOR TUBULAR BRAIDED COMPOSITES Garrett Melenka (University of Alberta), Jason Carey (University of Alberta)
Meeting room 6 2112-3 CHLORINE-DOPED GRAPHENE OXIDE/POLY (VINYLIDENE FLUORIDE) NANOCOMPOSITES: EXCEPTIONAL DIELECTRIC PROPERTIES Ying Wu (The Hong Kong University of Science and Development of a new Technology), Xiuyi Lin (The generalized analytical model Hong Kong University of for the characterization of Science and Technology), tubular braided composites. Xi Shen (The Hong Kong The model allows for the University of Science and prediction of diamond, regu- Technology), Xinying Sun lar and Hercules composite (The Hong Kong University braids. of Science and Technology), Xu Liu (The Hong Kong University of Science and Technology), Zhenyu Wang (The Hong Kong University of Science and Technology), Jang-Kyo Kim (The Hong Kong University of Science and Technology)
2111-4 THE MANUFACTURE AND MECHANICAL PROPERTIES OF A NOVEL NEGATIVE POISSON’S RATIO 3-COMPONENT COMPOSITE Guanhua Zhang (University of Exeter ), Oana Ghita (University of Exeter ), Ken Evans (University of Exeter) This paper introduces a further development to the current Helical Auxetic yarn by addition of a third component (a sheath), the presence of the sheath is expected to overcome previous problems.
We report a novel and facile method to fabricate the chlorinated GO by direct addition of SOCl2 into the GO dispersion and exceptional dielectric properties are obtained for Cl-rGO/PVDF composites. 2112-4 PREPARATION OF REDUCED GRAPHENE OXIDE-BASED CARBON COMPOSITE FILMS AND THE CHARACTERIZATION Yao Li (Harbin Institute of Technology), Yongan Niu (Harbin Institute of Technology)
Meeting room 7 2113-3 X-RAY CT IMAGING OF DAMAGE UNDER INSITU LOADING Andrew Rhead (University of Bath), Liam Glen (University of Bath), Shi Hua (University of Bath), Richard Butler (University of Bath)
M1 2114-3 MODELING OF DAMAGE EVOLUTION IN HIERARCHICALLY STRUCTURED COMPOSITE Songyun Ma (Institute of Materials ResearchHelmholtz-Zentrum Geesthacht), Ingo Scheider (Institute of Materials In-situ X-ray CT reveals a Research-Helmholtztwo stage evolution of dam- Zentrum Geesthacht), Ezgi age in laminates subject to Deniz Yilmaz (Hamburg transverse, near and onUniversity of Technology), edge quasi-static impact. Swantje Bargmann Initial intra-ply cracking is (Hamburg University of seen to give way to Mode Technology) I peeling. A continuum damage mechanic model coupled to hyperelasticity is developed for modeling the initiation and evolution of damage in mineral fibers as well as protein matrix of enamel
2114-4 MICROMECHANICAL MODELING OF THE PRESSURE DEPENDENT FAILURE OF A HIGHLY CROSSLINKED EPOXY RESIN Jérémy Chevalier (University of Louvain), Xavier Morelle (University of Louvain), Christian Bailly (University of Louvain), Thomas Pardoen (University of Louvain), Frédéric Lani (University of Louvain) A new fracture criterion of the epoxy resin RTM 6 is presented. The criterion explains the brittle fracture of the resin both in compression and tension by the presence of microscale defects.
M2 2115-3 THE INFLUENCE OF FREE EDGES ON CURVED BEAM STRENGTH Timothy Fletcher (University of Bath), Richard Butler (University of Bath)
M3 2116-2 DELAMINATION RESISTANCE OF COMPOSITES USING INCLINED Z-PINS Beene M’membe (University of Bristol), Sam Gannon (University of Bristol), Mehdi A new resin edge treatment Yasaee (University of Bristol), for curved laminates is Stephen Hallett (University developed. This improves of Bristol), Ivana Partridge 4-point bending strength by (University of Bristol) protecting the free edges and aids FE analysis, under- This study explores the taken alongside experimen- effect of inclined Z-pins on tal work. the fracture toughness of laminated composites in ELS specimens.
M4 2117-3 DESIGN AND ANALYSIS OF A MULTICELL SUBSCALE TANK FOR LIQUID HYDROGEN STORAGE Ilias Tapeinos (DELFT UNIVERSITY OF TECHNOLOGY), Sotiris Koussios (DELFT UNIVERSITY OF TECHNOLOGY), Roger Groves (DELFT UNIVERSITY OF TECHNOLOGY)
2115-4 ANALYSIS OF INITIAL ACCUMULATION OF MATRIX CRACKS IN ANGLE-PLY LAMINATES Vladimir Vinogradov (Newcastle University)
2117-4 DAMAGE AND PERMEABILITY OF COMPOSITE LAMINATES Hortense Laeuffer (DLA / CNES), Christophe Bois (Univ. Bordeaux), JeanChristophe Wahl (Univ. Bordeaux), Nicolas Perry (Arts et Metiers ParisTech)
2116-3 EPOXY REDUCED GRAPHENE OXIDE/ EPOXY INTERLEAVED MULTI-SCALE FIBER REINFORCED COMPOSITES WITH SIMULTANEOUS ENHANCEMENT IN A new variational stress TOUGHNESS AND analysis for angle-ply STRENGTH laminates with intralaminar Jingjing Jia (The Hong Kong cracks is proposed. The University of Science and method allows analysis of Technology), Xusheng du antisymmetric, staggered (The University of Sydney), and random arrays of paral- Jiefeng gao (The University lel cracks. of Sydney), Xiuyi Lin (The Hong Kong University of Science and Technology), Xi shen (The Hong Kong University of Science and Technology), Yiu-Wing Mai (The University of Sydney), Jang-Kyo Kim (The Hong Kong University of Science and Technology)
M5 2118-3 THROUGH THICKNESS REINFORCED CFRP/METAL JOINTS – THE IMPACT OF THE PINNING TECHNOLOGY ON THE JOINT’S TENSILE STRENGTH Ludwig Eberl (Technische Universität München), Swen Zaremba (Technische Universität München)
M6 2119-3 RESEARCH ON MULTI-PHYSICAL FIELD COUPLING MECHANISM IN TPS MATERIAL ABLATION Zhu Yanwei (Harbin Institute of Technology), Yi Fajun (Harbin Institute of Technology), Meng Songhe (Harbin Institute of Technology), Pan Weizhen (Harbin Institute of Technology), Peng Quasistatic testing of pinned Zujun (Harbin Institute of hybrid composite/steel Technology) Analysis of the structural double lap joints by the help performance of a conforma- of Digital Image Correlation ble pressurizable tank con- techniques. Joints were sisting of intersecting spher- created using laser pinning, ical shells (multi-cell tank) inserted pinning and CMT for application in cryogenic pinning. medium (LH2) storage
2118-4 FIBERREINFORCEMENT-BASED CRACK ARRESTER FOR COMPOSITE BONDED JOINTS Shu Minakuchi (The University of Tokyo)
programme
M7 M8 2120-3 MICRO AND MACROSCOPIC CHARACTERIZATION OF A-SMC UNDER HIGH SPEED TENSILE TEST Mohammadali SHIRINBAYAN (ARTS-ENSAM), Joseph Fitoussi (ENSAM), Fodil MERAGHNI (ENSAM), Benjamin SUROWIEC (PLASTIC OMNIUM), Michel BOCQUET (ENSAM), Abbas TCHARKHTCHI (ENSAM) Advanced Sheet Molding Compound (A-SMC) consists of high weight content of glass fibers. This work characterizes A-SMC behavior under high-speed tension.
2119-4 AN ENGINEERING VISION ABOUT ACOUSTIC FATIGUE IN COMPOSITE MATERIAL Francisco Kioshi Arakaki (EMBRAER S.A.)
2120-4 DEVELOPMENT OF A WORKFLOW FOR THE VIRTUAL OPTIMIZATION OF A NANOFIBERINTERLEAVED COMPOSITE LAMINATE SUBJECTED TO IMPACT LOADING According to the literature, Alessandro Pirondi A new crack arrester emof the early 60’s until the (Università di Parma), ploying interlocked continu- mid 80’s, there were few Francesco Musiari This study investigates ous fibers is proposed. The data on theoretical develop- (Università di Parma), the link between damage apparent fracture toughness ment about acoustic fatigue. Gregorio Giuliese (Università development and permea- increased more than By this time, abacus based di Parma), Andrea Zucchelli bility evolution in laminates. fivefold, and the maximum on simple theoretical mod- (Università di Bologna) Permeability and damage crack opening displacement els has be experiments were led and a doubled. The aim of this work is to prediction of the leak path develop a virtual optimizanumber is proposed. tion procedure for the impact strength of a composite laminate with interleaved electrospun nylon fiber nanomats
Developing a novel CVD-grown 3D network graphene interleaves in fiber reinforced composites with excellent interlaminar fracture toughness and interinterlaminar shear strenth
53
Scientific programme · Tuesday 21 July Congress Hall A Auditorium 15 2202 Nano Composites 5 16:40 2201 Processing Manufacturing Technology 5 16:40 2201-1 PERFORMANCE OF LIGHTWEIGHT HYBRID COMPOSITES BASED ON PA6 FOR LOAD-BEARING AUTOMOTIVE PARTS: INFLUENCE OF PROCESS AND USE CONDITIONS Reda Ourahmoune (Ecole Centrale de Lyon), Michelle Salvia (Ecole Centrale de Lyon), Jerome Laborde (Ecole Centrale de Lyon) The objective of this work is to characterize thermo-mechanical and mechanical properties of different composites: laminate, injected and over-molded in relation with the process conditions
17:00 2201-2 QUASI-STATIC AND FATIGUE EVALUATION OF LASER MACHINED CF-PPS AND CF-PEI COMPOSITES Peter Hansen (Element Materials Technology Hitchin), Richard Staehr (Laser Zentrum Hannover e.V), Peter Jaeschke (Laser Zentrum Hannover e.V)
2202-1 INFLUENCE OF MWCNTS ON MECHANICAL AND INTERFACIAL PROPERTIES OF CARBON FIBER /EPOXY FILAMENT WOUND COMPOSITES Gang Sui (Beijing University of Chemical Technology), Xiaoping Yang (Beijing University of Chemical Technology), Gang Li (Beijing University of Chemical Technology) The addition of liquid-like MWCNTs significantly improved the mechanical properties and interface bonding of T700 carbon fiber filament wound composites.
2202-2 EFFECT OF “FUZZY” FIBER MORPHOLOGY ON THE INTERNAL GEOMETRY OF TEXTILE COMPOSITES CHARACTERIZED BY MICROCOMPUTED TOMOGRAPHY Mohammadali Aravand (KU Leuven), Oksana Shishkina (KU Leuven), Ilya Straumit (KU Leuven), Andrew H. Liotta (Massachusetts Institute of This paper investigates the Technology), Sunny S. Wicks mechanical properties of laser (Massachusetts Institute of cut CF-PPS & CF-PEI thermo- Technology), Brian L. Wardle plastic materials compared (Massachusetts Institute to conventionally machined of Technology), Stepan V. samples. Several different Lomov (KU Leuven), Larissa laser cutting strategies were Gorbatikh (KU Leuven) used CNT growth can change the fiber processibility and affect the composite meso/ microstructure, its properties. We study the effects of grown, radially aligned CNTs on the textile composite architecture.
54
Auditorium 10 2203 Multifunctional Composites - Sensing and Actuation 5 KEYNOTE 2203-1 POWERFUL ARTIFICIAL MUSCLES FOR MORPHING COMPOSITES Ray Baughman (University of Texas at Dallas)
Auditorium 11 2204 Fatigue 5
Auditorium 12 2205 Structural Analysis and Optimization 5
2204-1 MICROCRACKING IN LAYERS OF COMPOSITE LAMINATES IN CYCLIC LOADING WITH TENSILE TRANSVERSE AND SHEAR STRESS COMPONENTS Hiba Ben Kahla (Lulea Univ of Technology), Janis Varna (Lulea Univ of Technology)
2205-1 ON THE BENDING BEHAVIORS OF COMPOSITE CYLINDERS FILLED WITH AN ELASTIC CORE Chaiwat Khurukijwanich (King Mongkut’s University of Technology Thonburi), Sontipee Aimmanee (King Mongkut’s University of Technology Thonburi)
Meeting room 18 2206 Process Induced Effects 4
2206-1 INFLUENCE OF POSTCURE ON CARBON FIBRE POLYIMIDE COMPOSITES WITH GLASS TRANSITION TEMPERATURES ABOVE 400C Patrik Fernberg (Swerea SICOMP), Roberts Joffe (Luleå University of Technology), Spyros Tsampas (Swerea Intralaminar cracking in SICOMP), Peter Mannberg layers of a quasi-isotropic New models are developed for (Swerea SICOMP) carbon fiber NCF laminate predicting bending response in tension-tension cyclic of composite cylindrical shells The communication presents loading is studied experimen- filled with an elastic core. results from an experimental tally. Methodology based on They are good for designing study in which the influence modified Weibull analysis is and understanding the light- of post-curing conditions on suggested weight components. physical and microstructural properties of polyimide composites was investigated.
2204-2 EFFECT OF EXTREME TEMPERATURES ON MICRODAMAGE DEVELOPMENT IN CF/ POLYIMIDE LAMINATES Hana Zrida (Lulea University of technology), Andrejs Pupurs (Lulea University of technology), Roberts Joffe (Lulea University of technology), Patrik Fernberg (Swerea Sicomp), Janis Varna (Lulea University of technology) CF/polyimide composite was produced at arount 390°C. The composite was subjected to repeated temperature variations and to isothermal aging and the micro-damage development was investigated.
2205-2 DEVELOPMENT OF A 15 METRE DIAMETER HIGH PERFORMANCE, LOW COST RADIO ANTENNA FOR THE SQUARE KILOMETRE ARRAY Gordon Lacy (National Research Council) The specifications for the radio reflector telescopes required for the Square Kilometer Array (SKA) project are particularly challenging and unique. The SKA project is an international project with t
Meeting room 19 2207 Process Modelling 5
2207-1 VISCOELASTIC INTER-PLY SLIP IN UNCURED LAMINATES: EXPERIMENTAL CHARACTERISATION AND MODELLING Samuel Erland (University of Bath), Timothy Dodwell (University of Bath), Richard Butler (University of Bath)
Meeting room 20 2208 Biocomposites 5
2208-1 PROPERTIES OF NATURAL REINFORCED EARTH-BASED COMPOSITES: ADVANTAGES AND DRAWBACKS WITH SYNTHETIC REINFORCEMENTS Carmen Galan-Marin (Universidad de Sevilla), Carlos Rivera-Gomez Experimental characterisation (Universidad de Sevilla), and modelling of inter-ply Francisco De Paula Garcíaslip for varying ply angles to Galindo (Universidad de understand the shearing of Sevilla) an uncured laminate and its implications to manufacturing This paper aims for a compreprocesses. hensive review of literature of natural or synthetic reinforced earth based composites. Characteristics such as type, composition and mechanical properties of the studied m 2206-2 EFFECT OF 2207-2 THE NUMERICAL 2208-2 CARBONIZED PROCESSING PARAMETERS AND EXPERIMENTAL ELECTROSPUN LIGNIN ON OUT-OF-AUTOCLAVE STUDIES ON THE FIBERS: PROCESSING AND COMPLEX-SHAPE PREPREG COMPRESSION MOLDING CHARACTERIZATION LAMINATE QUALITY OF THERMOSET COMPOSITE Manju Misra (University of AND MECHANICAL MATERIALS Guelph), Vida Poursorkhabi PERFORMANCE Sejin Han (Autodesk), Roy (University of Guelph), Nicolas Krumenacker (McGill Bendickson (Premix), Eric Makoto Schreiber (University University), Pascal Hubert Henry (Hampshire) of Guelph), Singaravelu (McGill University) Vivekanandhan (VHNSN This is on the numerical College), Amar Mohanty High-quality flat composite analysis and the comparison (University of Guelph) parts can now be readily with experiment for the commanufactured via out-of-au- pression molding of thermoset Novel carbon fibres were toclave prepregs and vacucomposite materials with an produced by carbonization of um-bag-only processing. Still, emphasis on the mechanical lignin-based electrospun fibthe aim of these technologies properties and shrinkage of ers. These fibers have potenremains the robust manufac- the par tial applications in sustainable turing of energy storage devices and air filters.
Meeting room 17 2209 Interfaces and Interphases 5
Meeting room 16 2210 Ductile and Pseudoductile Composites 1
2209-1 TRIAL TO OPTIMIZE FRACTURE PROPERTIES AND BIODEGRADABILITY IN HAP/PLA COMPOSITES AS BIO-ABSORBABLE BONE SUBSTITUTE USING HYBRID INTERFACE CONTROL Mototsugu Tanaka (Kanazawa Institute of Technology), Tomoyuki TAKAHASHI (Kanazawa Institute of Technology), Isao KIMPARA (Kanazawa Institute of Technology)
KEYNOTE 2210-1 HIGH PERFORMANCE PSEUDO-DUCTILE COMPOSITES Michael Wisnom (University of Bristol), G Czel (Budapest University of Technology and Economics), J D Fuller (University of Bristol), M Jalavand (University of Bristol)
Pseudo-ductile response is created by means of hybridisation, rotation of angle plies Previously, we had proposed and interfacial slip in disthe hybrid interface control in continuous laminates, hence HAp/PLA composite materials avoiding sudden catastrophic as one of the most promising failure. candidates of scaffold materials for the bone regeneration, using both pectin and c 2209-2 INVESTIGATION ON THE INTERFACE COATINGS WITHOUT STRENGTH DEGRADATION OF WOVEN OXIDE CERAMIC FABRICS Nijuan Sun (Aerospace Research Institute of Materials & Processing Technology), Juan Zhang (Science and Technology on Advanced Functional Composites Laboratory-Aerospace Research Institute of Materials & Processing Technology), Chi Wang (Aerospace Research Institute of Materials & Processing Technology), Dahai Zhang (Aerospace Research Institute of Materials & Processing Technology) Effective interface coatings prepared for fabric preforms, which minimized the tensile strength degradation of oxide fibers and improved the strength of ceramic matrix composite at high temperature.
Tuesday 21 July · Scientific Meeting room 5 2211 Textile-Based Composites and Fibre Architecture 5 2211-1 DYNAMIC MECHANICAL PROPERTIES OF WOVEN CARBON FIBRE REINFORCED THERMOPLASTIC COMPOSITE MATERIALS Diyar Kaka (University of Sheffield), Jem Rongong (University of Sheffield), Alma Hodzic (University of Sheffield), Charles Lord (University of Sheffield) The dynamic mechanical properties of woven carbon fibre reinforced Poly ether Ether ketone (PEEK) was investigated over a range of temperatures by using both experimental and numerical methods. 2211-2 MICRO-DEBOND DEVELOPMENT IN THE FATIGUE OF A NON-CRIMP 3D ORTHOGONAL WEAVE COMPOSITE LOADED IN THE WARP AND WEFT DIRECTIONS Matthew Poole (University of Surrey), Steven Ogin (University of Surrey), Paul Smith (University of Surrey), Garry Wells (DSTL), Prasad Potluri (University of Manchester), Philip Withers (University of Manchester), Tristan Lowe (University of Manchester) Early stage fatigue damage development of a 3D noncrimp orthogonal weave glass fibre composite has been studied using optical microscopy and plan view photography of transparent specimens.
Meeting room 6 Meeting room 7 2212 Graphene, Graphene- 2213 X-ray Computed Based Composites 5 Tomography 4 2212-1 IN-MOULD COATING OF THERMOSETTING COMPOSITES WITH POLYSULFONE Siti-Ros Shamsuddin (Imperial College London), Alexander Bismarck (University of Vienna) We have shown that an amorphous thermoplastic PES film can be used as an in-mould coating material for the fabrication of carbon fibre reinforced epoxy composites.
2212-2 STUDY OF FUNCTIONALIZEDGRAPHENE BASED POLYMER NANOCOMPOSITES THROUGH DETAILED ATOMISTIC SIMULATIONS Vagelis Harmandaris (University of Crete), Petra Bacova (Foundation for Research and Technology Hellas (FORTH)), Anastassia Rissanou (University of Crete)
M1 2214 Fracture and Damage Micromechanics 5 2213-1 2214-1 IS A CHARACTERISATION OF HOMOGENEOUS CRYOGENICALLY CYCLED REINFORCEMENT AUTOCLAVE & ATL CF/ DISTRIBUTION PEEK LAMINATES USING OPTIMAL? - COMPOSITES 3-D X-RAY CT WITH TAILORED David Grogan (National INHOMOGENEOUS University of IrelandMICROSTRUCTURE Galway), Sean Leen Hua-Xin Peng (Zhejiang (National University of University), Lujun Huang Ireland-Galway), Conchúr Ó (Harbin Institute of Brádaigh (University College Technology) Cork)
2213-2 ALGORITHMS FOR THE DETERMINATION OF ORIENTATIONTENSORS FROM THREE DIMENSIONAL MICRO-CT IMAGES WITH VARIOUS MICROSTRUCTURES Pascal Pinter (KIT), Stefan Dietrich (KIT), Kay André Weidenmann (KIT)
Three algorithms for orientation analysis, based on the concepts of anisotropic Gaussian filtering, Hessian We present results through matrix and structure tensor detailed atomistic molecular were implemented and dynamics simulations of evaluated. hybrid nanostructured polymer/graphene materials for different polymer matrices.
2214-2 PARAMETRIC STUDY OF PROGRESSIVE DAMAGE GROWTH AT THE FIBER/MATRIX SCALE USING COHESIVE ZONE ELEMENTS M. Keith Ballard (Texas A&M University), John Whitcomb (Texas A&M University) Cohesive zone elements were evaluated for use in modeling damage initiation and growth at the fiber/matrix scale. Various aspects of the parametric study will be discussed in the paper.
M2 2215 Fracture and Damage - Laminate Scale 5 2215-1 LOW-VELOCITY IMPACT RESPONSE OF PLANT FIBRE REINFORCED HYBRID COMPOSITES Yiou Shen (Tongji University), Yan Li (Tongji University), Junjie Zhong (Tongji University), Hao Ma (Tongji University)
M3 2216 Fracture and Damage - Delamination 5
M4 2217 Pressure Vessels and Piping 2
2216-1 A STRESS GRADIENT APPROACH FOR PREDICTING SIZE EFFECTS ON MODE II DELAMINATION Giuliano Allegri (Imperial College London)
2217-1 DEVELOPMENT OF DOME STRUCTURING MODEL OF FILAMENT WOUND COMPOSITE PRESSURE VESSEL El Moussaid Mohammed (University of Bordeaux), Wahl jean-christophe (University of Bordeaux), Perry Nicolas (Arts et Métiers ParisTech)
M5 2218 Joints - Design, Manufacturing and Testing 5 2218-1 NOVEL HYBRID COCURED CARBON/GLASS FIBRE COMPOSITE JOINTS FOR SAFETY CRITICAL STRUCTURES Jasim Ahamed (RMIT), Mathew Joosten (RMIT), Chun Wang (RMIT)
M6 2219 Applications Aerospace 4 KEYNOTE
programme
M7 2220 Applications - Bio & Medical 1
2220-1 MULTISCALE ENTHESIS MECHANICS 2219-1 BONDING Victor Birman (Missouri OF CFRP PRIMARY University of Science and AEROSPACE STRUCTURES Technology), Guy Genin – CRACKSTOPPING IN (Washington University), COMPOSITE BONDED Stavros Thomopoulos JOINTS UNDER FATIGUE (Washington University) A nonlocal elastic fracture Thomas Kruse (Airbus mechanics approach is New structurally efficient Operations GmbH ), Thomas Mechanical issues pertinent This paper studied the presented and applied to joining technique for inteKörwien (Airbus Defence to multiscale mechanics of effect of hybrid ratios on predicting the size effect grally co-cured hybrid com- and Space), Matthias enthesis concentrating on the low-velocity impact due to through-thickness A structuring model of com- posite structures has been Geistbeck (Airbus Group state-of-the art knowledge performance and energy compression on mode II posite pressure vessel dome proposed. Analysis method- Innovations) are outlined. Coupling absorption capacity of the delamination in “transverse is proposed. The structuring ology has been developed between nanoscale, microsjute/ramie fibre reinforced crack tension” coupons model takes into account for accurate prediction of Fatigue testing of composite cale and macroscale effects hybrid composites. the variability and specificity joint strength. bonded joints validating the is demonstrated. of the geometry of the dome crackstopping capability of area. different crack stopping features to adress aerospace certification of bonded composite joints 2215-2 IN-SITU 2216-2 A VARIATIONAL 2217-2 ASSESSMENT OF 2218-2 MULTI AXIAL 2220-2 DEVELOPING AN MEASUREMENTS OF ASYMPTOTIC METHOD THE TYPE OF STATISTICAL TESTING OF ADHESIVELY IN-SITU POLYMERISATION STRUCTURAL DAMAGE BASED FREE VIBRATION DISTRIBUTION BONDED JOINTS OF PROCESS FOR IN NOTCHED COMPOSITE ANALYSIS OF A THIN CONCERNING STRENGTH FIBER REINFORCED BIOCOMPOSITE LAMINATES PRETWISTED AND PROPERTIES OF THERMOPLASTIC MANUFACTURE Yuri Nikishkov (University DELAMINATED COMPOSITE CYLINDERS POLYMERS Menghao Chen (the of Texas at Arlington), ANISOTROPIC STRIP Georg Mair (BAM), Ben Nans ARGOUD (University University of Nottingham), Guillaume Seon (University Santosh Salunkhe (Indian Becker (BAM), Florian of Burgundy), Stéphane Derek Irvine (the University of Texas at Arlington), Institute of Technology Scherer (BAM) FONTAINE (University of of Nottingham-UK), Andrew Andrew Makeev (University Bombay), P. J. Guruprasad Burgundy), Benoit PIEZEL Parsons (the University of of Texas at Arlington) (Indian Institute of Distribution function influ- (University of Burgundy), Nottingham), Christopher Technology Bombay) ences safety assessment, Jérôme ROUSSEAU Rudd (the University of This work investigates the but individual determination (University of Burgundy), Nottingham), Ifty Ahmed (the in-situ development of In this work an attempt was isn’t possible. It is shown Antoine FIORE (VOLVO GTT) University of Nottingham) structural damage around made to analyze the modal why Weibull distribution with notches in composite lami- behavior of pretwisted T0=0 is recommanded for This study present a multi Investigations into mannates based on high fidelity anisotropic strips in the LC-assessment of compos- axial device for testing adufacturing technique of three-dimensional X-Ray CT presence of delamination ite cylinders. hesively bonded composite fully bioresorbable polymer measurements under static based on the mathematical joints. Results show a large composites using In-situ loading. framework of VAM with dependency on the load polymerisation technique sub-laminate approach. orientation, joint thickness, in order to improve and loading speed and test replace metal implants for temperature. hard tissue repair.
M8 2621 Special Symposium on Active Composites 2621-1 High-Bandwidth Sensing and Feedback Control in Computational Meta-materials Nikolaus Correll
2621-2 Closing Remarks Daniel Inman
55
Scientific programme · Tuesday 21 July Congress Hall A 17:20 2201-3 INVESTIGATIONS ON THE PROCESS STRATEGY OF LASER REMOTE CUTTING OF CARBON FIBRE REINFORCED PLASTICS WITH A THICKNESS OF MORE THAN 3 MM Matthias Schmidt-Lehr (Hamburg University of Technology), Max Oberlander (Hamburg University of Technology), Dirk Herzog (Hamburg University of Technology), Marten Canisius (Hamburg University of Technology), Markus Radek (Hamburg University of Technology), Claus Emmelmann (Hamburg University of Technology)
Auditorium 15 2202-3 NANOTUBEBUCKYPAPER/ POLYURETHANE COMPOSITES USING CARBON AND BORON NITRIDE NANOTUBES Yadienka Martinez Rubi (SDTNational Research Council Canada), Michael Jakubinek (SDT-National Research Council Canada), Behnam Ashrafi (Aerospace-National Research Council Canada), Keun Su Kim (SDT-National Research Council Canada), Kayla ONeill (Aerospace-National Research Council Canada), Christopher Kingston (SDT-National Research Council Canada), Stéphane Dénommée (SDTNational Research Council Canada), Benoit Simard (SDTCutting CFRP with laser leads National Research Council to a wear-free, fast process. Canada) State of the art is the cutting of thin laminates of max 3 Carbon nanotube & boron nimm. This paper introduces a tride nanotube papers are prolaser process for parts with duced and modified by integrathicknesses up to 10 mm. tion of polyurethane, providing improved/tailorable mechanical properties and an intermediate for hybrid composites 2202-4 TENSILE 17:40 2201-4 RESEARCH ON CUTTING FORCE AND PROPERTIES OF CARBON DELAMINATION DURING NANOTUBE/EPOXY MILLING CFRP WITH COMPOSITE FABRICATED VARIOUS WORKPIECE BY PULTRUSION OF CARBON INCLINED ANGLES NANOTUBE SPUN YARN Yan Chen (Nanjing Yoshinobu Shimamura University of Aeronautics (Shizuoka University), Kahori and Astronautics), Yucan Oshima (Shizuoka University), Fu (Nanjing University of Keiichiro Tohgo (Shizuoka Aeronautics and Astronautics), University), Tomoyuki Fujii Jingwen Zhou (Nanjing (Shizuoka University), Yoku University of Aeronautics Inoue (Shizuoka University) and Astronautics), Honghua Su (Nanjing University of High mechanical performance Aeronautics and Astronautics) carbon nanotube/epoxy composite fabricated by a CFRP laminates with varied pultrusion technique has bottom fiber direction angle developed by using carbon were trimmed at various nanotube spun yarn produced workpiece inclination angles. from spinnable carbon nanoThe cutting forces, delamina- tube forest. tions, and model for delamination were studied.
56
Auditorium 10 2203-2 DAMAGE DETECTION IN A COMPOSITE SKINSTRINGER PANEL USING LAMB WAVE PROPAGATION TECHNIQUE: A NUMERICAL STUDY Mohammad Hossein Sherafat (McGill University), Pascal Hubert (McGill University), Larry Lessard (McGill University) The finite element modelling of guided wave propagation for a composite skin-stringer assembly is developed, and the results justify the application of the methods for disbond detection.
2203-3 INTERNAL TEMPERATURE AND THERMAL GRADIENT SENSING OF COMPOSITES VIA NANOROD PLASMON RESONANCE SPECTROSCOPY Jeffery Baur (Air Force Research Laboratory), Joshua Kennedy (Air Force Research Laboratory), Keith Slinker (Air Force Research Laboratory), Brent Volk (Air Force Research Laboratory), Hilmar Koerner (Air Force Research Laboratory), Gregory Ehlert (Air Force Research Laboratory) Here we discuss a new method for the determination of internal temperatures and temperature gradients within a composite using a color change related to the aspect ratio of dispersed gold nanorods.
Auditorium 11 2204-3 VARIABLE LOADING FATIGUE LIFE OF WOVEN FABRIC CARBON/EPOXY LAMINATES UNDER ALTERNATING EQUAL-LIFE WAVEFORMS OF DIFFERENT R-RATIOS Masamichi Kawai (University of Tsukuba)
Auditorium 12 2205-3 LEVEL SET OPTIMISATION FOR COMPOSITE FIBRE PATHS H Alicia Kim (University of Bath), Christopher Brampton (University of Bath)
This work optimises variable orientation composite structures using a level set Effect of repeated alternations method. Solutions produced in R-ratios on fatigue life of a feature continuous fibre quasi-isotropic woven fabric paths, suitable for advanced CFRP laminate has been stud- fibre placement (AFP) manied. A variable loading fatigue ufacture. life prediction methodology is also developed.
2204-4 REDUCTION OF FATIGUE DAMAGE EQUIVALENT LOADS IN THE WIND TURBINE SYSTEM THROUGH THE USE OF OFFAXIS PLIES IN THE SPAR CAPS OF COMPOSITE WIND TURBINE BLADES Altan Kayran (METUWind Center for Wind Energy), Mehmet Ozan Gözcü (METUWind Center for Wind Energy-Middle East Technical University), Touraj Farsadi (METUWind Center for Wind Energy-Middle East Technical University), Özgün Şener (METUWind Center for Wind Energy-Middle East Technical University) REDUCTION OF FATIGUE DAMAGE EQUIVALENT LOADS IN THE WIND TURBINE SYSTEM THROUGH THE USE OF OFF-AXIS PLIES IN THE SPAR CAPS OF COMPOSITE WIND TURBINE BLADES.
2205-4 AN IMPROVED VIRTUAL TESTING APPROACH FOR LAMINATED COMPOSITES BASED ON MICROMECHANICS Pierre Ladeveze (ENS Cachan), David Néron (ENS Cachan), Hadrien Bainier (ENS Cachan)
Meeting room 18 2206-3 INFLUENCE OF CARBON FIBRES ON THE CRYSTALLNITY OF POLYAMIDE-6 Thomas Guglhoer (University of Augsburg), Marco Korkisch (University of Augsburg), Markus G. R. Sause (University of Augsburg)
Meeting room 19 2207-3 NUMERICAL EVALUATION OF RESIDUAL MANUFACTURING DEFORMATIONS IN COMPLEX PULTRUDED COMPOSITE PROFILES Alexander Safonov (Skolkovo Institute of Science and Technology), Alexander Konstantinov (Mechanics The influence of carbon Research Institute of the fibres on the crystallinity of Lobachevsky State University Polyamide 6 was investigated of Nizhny Novgorod) in dependence of the cooling rate during crystallization The purpose of this study is from melt. to develop a methodology for numeric evaluation of residual deformations after pultrusion in complex profiles of composite materials with thermoset resin.
2206-4 STUDY OF NON-DESTRUCTIVE MEASUREMENT APPROACH OF RESIDUAL STRESS ON FRP LAMINATE BASED ON THERMAL EXPANSION Satoshi Hayashi (Kanazawa Institute of Technology), Hirokuni Adachi (Kanazawa Institute of Technology), The work deals with two Hiroshi Saito (Kanazawa enhancements of our damage Institute of Technology), Isao mesomodel for laminated Kimpara (Kanazawa Institute composites: micromeof Technology) chanics-based modeling of coupling between ply microc- We focused on the correlation racking and delamination, and between thermal expansion prediction of splits. behavior and residual stress. Then it is clear there is strong linear relationship between residual stress and linear expansion coefficient.
2207-4 TWO DIMENSIONAL FINITE ELEMENT MODELING OF COMMINGLED YARNS COMPOSITES CONSOLIDATION PROCESS Mylene Lagardere (Mines Douai), Baochao Li (Mines Douai), Chung-Hae Park (Mines Douai) Modelling of consolidation processes for thermoplastic matrix composite structures is adressed, considering hybrid yarns textiles. Model is validated through analytical and experimental studies.
Meeting room 20 2208-3 MECHANICAL PROPERTY AND FRACTURE BEHAVIOR OF THERMOSETTING FRP REINFORCED CARBON FIBERS AND PAPERBOARD Takanori Kitamura (Kyoto Institute of Technology), Keisuke Kitai (Kitai Seisakusyo Co.-Ltd), Kanta Ito (Daiwa Itagami Co. Ltd.), Suguru Teramura (Daiwa Itagami Co. Ltd.), Zhiyuan Zhang (Daiwa Itagami Co. Ltd.), Hiroyuki Hamada (Kyoto Institute of Technology)
Meeting room 17 2209-3 INFLUENCE OF FIBER SIZING ON PROPERTIES OF BASALT FIBER REINFORCED COMPOSITE Lichao Yu (Donghua University), Zhenjin Cui (Kyoto Institute of Technology), Yuqiu Yang (Donghua University)
Meeting room 16 2210-2 CELLULOSE NANOCOMPOSITES WITH DUCTILE MECHANICAL BEHAVIOR Lars Berglund (KTH Royal Inst of Technology), Mohd Farhan Ansari (KTH Royal Inst of Technology)
Comparison and analysis have been carried out to discuss the change of mechanical property by chang the PUD pick-up ratio on basalt fibre and improved mechanical properties compared with virgin one.
Ductility mechanisms in biocomposites based on cellulose nano fibers (CNF) are discussed.Preparation is as follows: porous CNF networks are formed, and impregnated by unsaturated polyester or epoxy.
2209-4 INTERFACIAL ADHESION BETWEEN GLASS FIBERS AND ACRYLIC-BASED MATRICES AS STUDIED BY MICROMECHANICAL TESTING Quentin Charlier (INSA-LyonIngénierie des Matériaux Polymères-IMP-CNRS UMR5223-F-69621), Frédéric Lortie (INSA-LyonIngénierie des Matériaux Polymères-IMP-CNRS UMR5223-F-69621), JeanFrançois Gérard (INSA-LyonIngénierie des Matériaux Polymères-IMP-CNRS UMR5223-F-69621)
2210-3 BIO-INSPIRED CONCEPTS FOR NATURAL & CELLULOSE FIBREREINFORCED COMPOSITES WITH DUCTILE BEHAVIOUR Jörg Müssig (Hochschule Bremen - University of Applied Sciences), Nina Graupner (Hochschule Bremen - University of Applied Sciences )
Deforestation is a big problem to the world. The usage of paperboard can release the needs to the timber. The paperboard FRP gives paperboard new properties.
Acrylic/glass fiber model specimens were prepared by in-situ polymerizing a MMAbased reactive mixture onto a single filament and studied with single fiber fragmentation test and microbond test.
Biological materials show impressive combinations of mechanical properties like strength and toughness. The structure of a red rhubarb petiole and a coconut pericarp are transferred to composites.
Tuesday 21 July · Scientific Meeting room 5 2211-3 EMBEDDED ELEMENT METHOD IN MESO- FINITE ELEMENT MODELLING OF TEXTILE COMPOSITE: A”GALLERY” Seyed Ahmad Tabatabaei (Katholieke Universiteit Leuven), Stepan Lomov (Katholieke Universiteit Leuven-Leuven)
Meeting room 6 2212-3 STRUCTURAL HEALTH MONITORING OF CEMENT BASED MATERIALS REINFORCED WITH GRAPHENE NANOPLATELETS Zoi S. Metaxa (National Technical University of Athens)
Meeting room 7 2213-3 FOUR DIMENSIONAL SYNCHROTRON TOMOGRAPHY OF FATIGUE CRACK GROWTH AND DAMAGE IN METAL MATRIX COMPOSITES Peter Hruby (Arizona State University), Sudhanshu Singh (Arizona State The present work focuses University), Jason Williams The application of the on the use of graphene (Arizona State University), embedded element method nanoplatelets for the devel- Xianghui Xiao (Argonne in different aspect of textile opment of smart cement National Laboratory), composites ranging from based nanocomposites Francesco DeCarlo (Argonne calculation of the homoge- that, contrary to traditional National Laboratory), Nik nized stiffness properties, approaches that require the Chawla (Arizona State stress/strain fields, etc is use of high-cost attach University) investigated. MMCs have high strength and toughness, In situ x-ray synchrotron tomography and extended finite element modeling of damage in 2080 aluminum alloy reinforced with SiC particles was conducted.
M1 2214-3 IMPLEMENTATION OF A MOLECULAR INTERPHASE MODEL WITHIN A MULTISCALE FRAMEWORK FOR POLYMER MATRIX COMPOSITES Joel Johnston (Arizona State University), Bonsung Koo (Arizona State University), Aditi Chattopadhyay (Arizona State University)
2211-4 DAMAGE DEVELOPMENT IN STEEL FIBRE COMPOSITES WITH UNIDIRECTIONAL AND QUASI-UNIDIRECTIONAL WOVEN ARCHITECTURES Michaël Guy Callens (KU Leuven), Larissa Gorbatikh (KU Leuven), Ignaas Verpoest (KU Leuven)
2214-4 EFFECT OF FIBER WAVINESS ON TENSILE STRENGTH OF FLAX FIBER-REINFORCED COMPOSITES Taweesak Piyatuchsananon (Yamaguchi University), Akira Furuya (Yamaguchi University), Koichi Goda (Yamaguchi University)
2212-4 POLYETHYLENE/ GRAPHENE NANOCOMPOSITES OBTAINED BY SUPPORTED CATALYST OVER FEW GRAPHENE LAYERS Griselda Barrera Galland (Universidade Federal do Rio Grande do Sul/Instituto de Química), Giovani Pavoski (Universidade Federal do The effect of the microRio Grande do Sul/Instituto structure on the damage de Química), Nara Regina development in steel fiber de Sousa Basso (Pontifícia composites is investigated. Universidade Católica do Quasi-unidirectional and Rio Grande do Sul), Thuany perfectly unidirectional fibre Maraschin (Pontifícia architectures are studied. Universidade Católica do Rio Grande do Sul), Marcéo Auler Milani (Universidade Federal do Rio Grande do Sul/Instituto de Química), Raúl Quijada (Universidad de Chile), Denise Azambuja (Universidade Federal do Rio Grande do Sul/ Instituto de Química) In this work we synthetized nanocomposites of polyethylene with two types of graphites, graphite oxide (GO) and reduced graphene oxide (RGO), by in situ polymerization using a metallocene catalyst. Bo
M2 2215-3 RESIDUAL FLEXURAL STRENGTH AFTER IMPACT AND HYDROSTATIC CYCLING IN GLASS/SYNTACTIC FOAM SANDWICH LAMINATES Prasad Potluri (University of Manchester), Sofia Pavlopoulou (University of Manchester)
Residual flexural strength of syntactic foam sandwich A novel multiscale model composites have been framework is presented investigated. Influence of which studies the effect cyclic hydrostatic pressure of the interphase between and impact energy levels carbon fiber and polymer on flexural properties have matrix using atomistic scale been reported. simulations and subcell based micromechanics.
The purpose of this study is to analyze the effect of the fiber waviness on the tensile strength of flax fiber-reinforced composites by using Tsai-Hill theory and spatial autocorrelation.
M3 2216-3 INTERLAMINAR DAMAGE ANALYSIS OF COMPOSITE STRUCTURES USING ROBUST INTERFACE ELEMENTS Tillmann Herwig (Institute for Structural Analysis), Werner Wagner (Institute for Structural Analysis)
M4 2217-3 INTEGRATED DESIGN AND PRODUCTION OF FILAMENT-WOUND COMPOSITE STRUCTURES: COMPROMISE BETWEEN STRENGTH AND MANUFACTURABILITY Lei Zu (Wuhan University of Technology), Jihui Wang (Wuhan University of Technology), Shuxin Li (Wuhan University of Technology)
For the development of robust interface elements a hybrid mixed formulation based on the potential by Hu-Washizu and a non-po- An integrated design and tential mixed mode cohesive production method of law are applied. filament-wound structures was outlined to offer an effective tool able to fill the gap between “design for structures” and “design for manufacturability”.
2216-4 INTERLAMINAR FRACTURE TOUGHNESS OF FIBER METAL LAMINATES Carlos Rubio-Gonzalez (CIDESI), Jorge Quintero (ITESM), Edgardo PerezHermosillo (ITESM) The aim of this paper is to investigate the feasibility of applying different DCB models to predict interlaminar toughness of composite laminates and FMLs and compare with experimental results.
M5 2218-3 EXPERIMENTAL AND NUMERICAL INVESTIGATION INTO COBONDED PATCH REPAIRS FOR STRUCTURAL COMPOSITES ADDITIONALLY REINFORCED WITH HIGH PERFORMANCE MULTIFILAMENT YARN Markus Linke (Hamburg University of Applied Sciences), Marie Moebius (Hamburg University of Applied Sciences), FrankDavid Georges (Hamburg University of Applied Sciences), Philipp Abel (RWTH Aachen University), Thomas Gries (RWTH Aachen University)
programme
M6 2219-2 SIMULATION OF COMPOSITE DAMAGE DUE TO LIGHTNING STRIKE Cédric Huchette (Onera the French Aerospace lab), Johann Rannou (ONERA the french Aerospace Lab), Laurent Chemartin (ONERA the french Aerospace Lab)
M7 M8 2220-3 COMPOSITES OF MGB2 – RARE-EARTHOXIDES: FABRICATION BY SPARK PLASMA SINTERING AND FUNCTIONAL PROPERTIES Dan Batalu (University POLITEHNICA of Bucharest), Robert Bololoi (University POLITEHNICA of Bucharest), The aim of this study is to Gheorghe Aldica (National propose a first comprehen- Institute of Materials sion model of the matrix Physics), Petre Badica damage due to electro (National Institute of thermal loading imposed by Materials Physics) lightning strike impact on carbon/epoxy laminates. Dense MgB2 samples with La2O3 addition were obtained by spark plasma sintering. Formation of phosphate needles, gathered in bouquets, show a A co-bonding repair method possible bioactive behavior is experimentally as well of MgB2. as numerically investigated using high performance multifilament yarns to reinforce the bonding area of single lapped joints.
2218-4 MODELING BLAST FAILURE OF FIBRE METAL LAMINATES Zhongwei Guan (University of Liverpool), Elena Sitnikova (University of Nottingham), Wesley Cantwell (Khalifa University of ScienceTechnology and Research)
2219-3 A PROOF-OFCONCEPT OF SMART HANGAR FOR COMPOSITE AIRCRAFT See Yenn Chong (Korea Advanced Institute of Science and Technology), Syed Haider Abbas (Korea Advanced Institute of Science and Technology), The perforation failure Hye-Jin Shin (LANL-CBNU of fibre metal laminates Engineering Institutesubjected to blast has been Korea-Chonbuk National simulated. The model em- University), Truong Thanh ploys modified 3D Hashin’s Chung (Korea Advanced criteria with consideration Institute of Science and of damage evolution and Technology), Jung-Ryul Lee rate-dependence. (Korea Advanced Institute of Science and Technology)
2220-4 A NOVEL DESIGN OF INJECTABLE POROUS HYDROGELS WITH IN SITU PORE FORMATION Ortal Yom-Tov (Technion), Havazelet Bianco-Peled (Technion), Dror Seliktar (Technion) The use of injectable porous hydrogels is of great interest in biomedical applications due to their excellent permeability and ease of integration into sites of surgical intervention. By implementing
To enhance the efficiency of the aircraft maintenance performance, a new cutting-edge paradigm of structural health management – Smart Hangar for aerospace industry is proposed in this paper.
57
Scientific programme · Wednesday 22 July Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 8:30 Extreme loading of composite materials in naval applications Yapa D. S. Rajapakse, Office of Naval Research, Virginia, USA 3102 Nano Composites 6 3103 ONR Special 3104 Fatigue 6 3105 Structural Analysis 9:30 3101 Processing Manufacturing Technology 6 Symposium on Marine and Optimization 6 Composites 1 3102-1 A MODEL FOR KEYNOTE 3104-1 EVALUATION 3105-1 FEASIBILITY STUDY 9:30 3101-1 THE GENESIS OF ART FRP - BASED ON THE THE ENHANCEMENT OF OF BENDING FATIGUE OF A SANDWICH CHOPPER JAPANESE TRADITIONAL YOUNG’S MODULUS OF 3103-1 DEFORMATIONS CHARACTERISTICS OF CFRP DISC FOR A TIME OF FLIGHT SENSE OF BEAUTYMACROSCOPIC CARBON DUE TO EXPLOSIVE AND FOR MARINE PROPELLERS (TOF) SPECTROMETER Yuki Ikenobo (Ikenobo), Tetsuo NANOTUBE FIBERS VIA IMPLOSIVE LOADS OF Daichi Ogawa (School of Valeria Antonelli (Technische KIKUCHI (Toyugiken Co.-Ltd.), POLYMER INFILTRATION SANDWICH CYLINDERS Engineering-University of Universität München), Hiroyuki HAMADA (Kyoto Bartolomé Mas (IMDEA USING THIRD ORDER SHEAR Tokyo), Hideaki Murayama Matthias Weinzierl Institute of Technology) Materials Institute), Juan José AND NORMAL DEFORMABLE (School of Engineering(Technische Universität Vilatela (IMDEA Materials THEORY (TSNDT) University of Tokyo), Kazuro München), Horst Baier This study has focused on the Institute) Romesh Batra (Virginia Kageyama (Graduate School (Technische Universität FRP. By combining superior Polytechnic Institute and of Engineering-University München) FRP functionality, and the We studied stress transfer State University), Priyal Shah of Tokyo), Toshio Yamatogi Japanese traditional sense of mechanisms that take place (Virginia Polytrechnic Institute (Nakashima Propeller Co. The aim of the feasibility beauty originating in tradition- in carbon nanotube fibres and State University) Ltd.), Makoto Kanai (School study is the maximisation al Japanese Kyo-yuzen fabric infiltrated with different of Engineering-University of the natural frequency of and Ikebana. polymers under axial load. We use an equivalent single of Tokyo), Takaya Sakurai a chopper disc. A sandwich A model to predict the final layer third order shear and (Nakashima Propeller Co. Ltd.) design reduces the weight composite properties is normal deformable shell thepenalty caused by a CFRP proposed. ory (TSNDT) to study transient This paper reports the bend- disc with the same natural deformations of linear elastic ing fatigue characteristics frequency. sandwich cylinders under im- of CFRP manufactured from plosive and explosive loads. VaRTM process about stiffness. Stiffness degradation among the number of cycles was evaluated.
9:50 3101-2 OPEN MICROWAVE HEATING OF POLYMER RESIN WITH DISPERSED CARBON NANOTUBES USING INTERDIGITAL ELECTRODE FILM Ryosuke Matsuzaki (Tokyo University of Sicence), Shinya Hatori (Tokyo University of Science), Akira Todoroki (Tokyo Institute of Technology)
3102-2 ESTIMATION OF STRENGTH AND FRACTURE TOUGHNESS FOR NANOMATERIALS Chyanbin Hwu (National Cheng Kung University), Yu-Kuei Yeh (National Cheng Kung University)
The molecular-continuum model proposed previously for the estimation of elastic The present study proposes constants was extended here an open-type microwave for the prediction of ultimate heating of a polymer resin us- strength and fracture toughing microwaves produced by ness of nanomaterials. an interdigital electrode array film positioned between the composites and the mold.
58
3104-2 FATIGUE-INDUCED DAMAGE MECHANISMS IN CARBON/EPOXY LAMINATES INFLUENCED BY MEAN STRESS AND FIBRE VOLUME CONTENT Julia Brunbauer (Montanuniversitaet Leoben), Gerald Pinter (Montanuniversitaet Leoben) The combined effect of fibre volume content, anisotropy, load amplitude and mechanical mean stress on the mechanical behaviour and the fatigue damage of carbon/epoxy laminates was investigated.
3105-2 AEROELASTIC TAILORING OF TOWSTEERED COMPOSITE WING BOXES Olivia Stodieck (University of Bristol), Jonathan Cooper (University of Bristol), Paul Weaver (University of Bristol), Paul Kealy (Airbus Operations UK Ltd)
Meeting room 18
Meeting room 19
Meeting room 20
Meeting room 17
Meeting room 16
3106 Process Induced Effects 5
3107 Process Modelling 6
3108 Fibre reinforcement
3109 Interfaces and Interphases 6
3110 Damage Tolerance of Composite Structures 1
3106-1 INTEGRATED ANALYSIS OF COMPACTION, EDGE DISTORTION AND RESIDUAL DEFORMATION OF WIND-TURBINE THICK COMPOSITES SPAR-CAP Ganapathi Ammasai Sengodan (Nanyang Technological University), Sunil C. Joshi (Nanyang Technological University), Zhong Chen (Nanyang Technological University)
3107-1 COMPUTATIONAL SIMULATION OF COMPRESSION FORMING OF THE THERMOPLASTIC PREPREG Mark Kantor (skoltech), Andrei Ushakov (skoltech), Alexander Safonov (skoltech), Boris Fedulov (skoltech)
3109-1 THE ROLE OF THE EPOXY RESIN: CURING AGENT RATIO IN COMPOSITE INTERFACIAL STRENGTH BY SINGLE FIBRE MICROBOND TEST Ross Minty (University of Strathclyde), James Thomason (University of Strathclyde), Helga Petersen (Technical University of Denmark)
3110-1 EXPERIMENTAL ASSESSMENT AND NUMERICAL ANALYSIS OF 3D WOVEN COMPOSITE T-JOINTS UNDER TENSILE LOADING Shibo Yan (University of Nottingham), Andrew Long (University of Nottingham), Xuesen Zeng (University of Nottingham)
3108-1 INVESTIGATION OF MECHANICAL PROPERTIES OF FILAMENT WOUND UNIDIRECTIONAL BASALT FIBER REINFORCED POLYMERS FOR AUTOMOTIVE AND PRESSURE VESSEL APPLICATION Eduard Kessler (NuCellSys The research is the succesfull GmbH), Rainer Gadow attempt to demonstrate that (University of Stuttgart), the thermoplastic composites Patrick Weichand (University forming problem can be of Stuttgart) A numerical method is solved in the framework of established to integrate the the single problem. Comparison of tensile propcompaction and cure deforerties of fibers and filament mation of a composite wind wound polymer composites turbine spar cap. This predicts for filament wound pressure the non-uniform thickness vessels with focus on basalt and curvature of the cured fibers and basalt fiber comspar cap. posites.
3106-2 INFLUENCE OF MANUFACTURING-INDUCED DEFECTS ON THE INTRAAND INTER-LAMINAR PROPERTIES OF CARBON/ EPOXY NCF LAMINATES Paolo Andrea Carraro (University of Padova), Lucio Maragoni (University of Padova), Marino Quaresimin (University of Padova)
3107-2 3-D DYNAMIC SIMULATION OF FLEXIBLE FIBER WITH A SYSTEM OF ARTICULATED BODIES Khalid El Azzouzi (IRT Jules Verne), Christophe BINETRUY (Institute of Civil Enginneering and Mechanics (GeM)Ecole Centrale de Nantes ), Sébastien COMAS CARDONA (Institute of Civil Enginneering and Mechanics (GeM)-Ecole Centrale de Nantes)
3108-2 MORI-TANAKA METHODS FOR MICROMECHANICS OF RANDOM FIBRE COMPOSITES Stepan Lomov (KU Leuven), Yasmine Abdin (KU Leuven), Atul Jain (KU Leuven)
Found that the apparent IFSS of the glass fibre-epoxy matrix measured using the microbond test showed a significant dependence on the stoichiometric ratio of the epoxy resin and curing agent present.
3109-2 INFLUENCE OF DIFFERENT SIZING ON FRACTURE TOUGHNESS AND FLEXURAL PROPERTIES OF CARBON FIBER REINFORCED POLYPHTHALAMIDE Veronika Radlmaier (Technische Universität München-Faculty of Eshelby/Mori-Tanaka predict Mechanical Engineering), adequately the homogenised Andreas Erber (Technology Tow-steered laminates stiffness, non-linear stress& Innovation), Patrik-Vincent achieved improved aeroelastic The influence of inter-tow strain curves stresses in the Brudzinski (Technology & behaviours compared to voids on the inter-laminar fibres and on the fibre/matrix Innovation), Hannes Koerber straight-fibre laminates by and intra-laminar properties A new discrete element meth- interface and progressive fibre (Technische Universität allowing the stiffness distribu- of carbon/epoxy NCF was od is developed to study the debonding. München-Faculty of tions and the wing spanwise analysed on specimens dynamic motion of a flexible Mechanical Engineering), bend-twist coupling to be infused with different process fibre using articulated body Klaus Drechsler (Technische optimised. parameters. system and recursive algoUniversität München-Faculty rithms based on the Newtonof Mechanical Engineering) Euler equations. In this study, the influence of two different carbon fiber sizing materials was investigated on mode I interlaminar fracture toughness and flexural properties of composites with PPA matrix.
This paper presents the experimental assessment and numerical analysis of the mechanical properties of 3D woven composite T-joints subjected to a tensile pull-off loading scenario.
3110-2 INDUCED THERMO-MECHANICAL DAMAGE IN THE DRILLING OF THERMOPLASTICTOUGHENED CFRP COMPOSITES Julián Luis Merino-Pérez (The University of Sheffield), Alma Hodzic (The University of Sheffield), Eleanor Merson (Sandvik Coromant-Sandvik AB), Sabino Ayvar-Soberanis (The University of Sheffield) This investigation focused on the assessment of the induced thermal and mechanical damage in the vicinity of the machined surface in the drilling of carbon fibre reinforced polymer (CFRP) composites.
Wednesday 22 July · Scientific Meeting room 5
Meeting room 6
3111 Textile-Based Composites and Fibre Architecture 6 3111-1 THERMOFORMING SIMULATION OF THERMOPLASTIC PREIMPREGNATED TEXTILE REINFORCEMENT Masato Nishi (JSOL Corporation), Tei Hirashima (JSOL Corporation), Tetsusei Kurashiki (Osaka University), Masashi Kurose (Gunma National College of Technology), Tetsushi Kaburagi (Gunma), Keisuke Uenishi (Osaka University)
3112 Graphene, Graphene- 3113 Matrix Materials 1 Based Composites 6 KEYNOTE
3112-1 STRUCTURAL GRAPHENE COMPOSITES: TAKING THE LESSONS OF FUNDAMENTAL STUDIES THROUGH TO BULK COMPOSITES Ian Kinloch (University of Manchester), Lei Gong (University of Manchester), Zhe Ling Li (University of Manchester), Cristina Valles (University of Manchester), Arun Raju (University of We propose a shell and Manchester), Konstantin membrane hybrid FE model Novoselov (University of of CFRTP for non-isothermal Manchester), Robert Young forming simulation. The pro- (University of Manchester) posed model can describe temperature dependent The micromechanics of non-linear in-plane and out- graphene composites has of-plane behaviors. been explored using Raman spectroscopy on model experimental systems. The knowledge gained has been used to produce bulk composites with high loadings. 3111-2 A STUDY OF WARP-KNITTED FABRIC STRUCTURE PARAMETERS AFFECTING THE MECHANICAL PROPERTIES OF TEXTILE-REINFORCED CONCRETE Oleg Stolyarov (St. Petersburg State Polytechnical University), Till Quadflieg (RWTH Aachen University), Thomas Gries (RWTH Aachen University) The results of investigations on the warp-knitted reinforced fabric and concrete samples from glass and carbon reinforced rovings with three common types of warp-knit stitches are presented.
Meeting room 7
3113-1 CURING OF EPOXY RESINS: A NANOSCALE VIEW David Seveno (KU Leuven), Adri Van Duin (Penn State)
M1
M2
M3
M4
3114 Fracture and Damage - Materials Scale 1 3114-1 A METHOD TO CHARACTERIZE BIAXIAL STRENGTHENING EFFECTS WITH A UNIAXIAL TEST Adam Biskner (LoadPath), Emmett Nelson (Autodesk), Jeffry Welsh (Operationally Responsive Space Office), Andrew Williams (Air Force Research Laboratory Space Vehicles Directorate)
3115 Models Homogenization – Micro to Macro 1 3115-1 A MULTI-SCALE MODEL FOR THE MECHANICAL PROPERTIES OF FIBER-REINFORCED SILICA AEROGEL COMPOSITE Zeshuai Yuan (Beihang University), Zixing Lu (Beihang University), Zhenyu Yang (Beihang University), Guiping Lin (Beihang University)
3116 Nanocomposites for Structural Lightweight Modelling and Testing 1 3116-1 MODELING AND PREDCITION OF FRACTURE PROPERTIES IN NANOGRAPHENE REINFORCED POLYMERS Samit Roy (University of Alabama), Avinash Akepati (University of Alabama), Vinu Unnikrishnan (University of Alabama)
3117 Ductile and Pseudo- 3118 Fire Resistance 1 ductile Composites 2
This study presents a methodology to model the curing process of an epoxy system at the atomistic scale using reactive molecular dynamics simulations (ReaxFF force field). This paper seeks to characterize the biaxial behavior of composites using a unique uniaxial experimental and verifying it with biaxial data and Autodesk Helius analytical predictions
3113-2 NANO-RUBBER TOUGHENING IN EPOXY AND EPOXY/CARBON FIBRE COMPOSITES: TEMPERATURE EFFECT Feng Xu (The University of Sydney), Hong-Yuan Liu (The University of Sydney) In this paper, we present the results of our recent work on the nano-rubber toughening effects on bulk epoxy and epoxy/carbon fibre composites tested in temperature range -80℃ to 50℃.
3114-2 EFFECT OF DAMAGE ON COMPRESSIVE STRENGTH IN FIBER DIRECTION FOR CFRP Gabriel Eyer (Laboratoire de Mecanique et d’Acoustique), Olivier Montagnier (Centre de Recherche de l’Armée de l’Air), Christian Hochard (Laboratoire de Mecanique et d’Acoustique), Jean-Paul Charles (Laboratoire de Mecanique et d’Acoustique), Frédéric Mazerolle (Laboratoire de Mecanique et d’Acoustique)
A new multi-scale model is proposed to investigate the relationship between the mechanical properties and microstructure of fiber-reinforced silica aerogel composites.
3117-1 EXPLORING ROUTES TO CREATE HIGH PERFORMANCE PSEUDO-DUCTILE FIBRE REINFORCED COMPOSITES Omar Bacarreza Nogales (Imperial College London), Alexander Bismarck (Imperial College London), Jonny Blaker (University of Manchester), Hele Diao In this paper, an atomistic (Imperial College London), (MD) methodology is Gael Grail (Imperial College employed to compute London), Paul Robinson J-integral using atomistic (Imperial College London), data obtained from molecu- Soraia Pimenta (Imperial lar dynamics simulations for College London), Milo epoxy/nanographene using Shaffer (Imperial College the Reax force field. London)
3115-2 MICROMECHANICS MODELING OF MAGNETOSENSITIVE POLYMERIC MATERIALS DURING CURING George Chatzigeorgiou (Arts et Métiers ParisTech), Mokarram Hossain (University of ErlangenNuremberg), Fodil Meraghni (Arts et Métiers ParisTech), Paul Steinmann (University of Erlangen-Nuremberg)
3116-2 NANOCOMPOSITES BASED ON NONWOVEN BORON NITRIDE NANOTUBE SHEETS: PROCESSING AND PROPERTIES Behnam Ashrafi (National Research Council), Michael Jakubinek (National Research Council), Jingwen Guan (National Research Council), Yadienka MartinezRubi (National Research Council), Keun Su Kim This work proposes a cou- (National Research Council), pled magneto-mechanical Kayla ONeill (National multi-scale model, based on Research Council), Meysam the Mori-Tanaka method, for Rahmat (National Research Compressive strength of simulating the curing proCouncil), Christopher CFRP in fiber direction is cess of magneto-sensitive Kingston (National Research investigated. The effect of polymers. Council), Ali Yousefpour matrix damage is particular(National Research Council), ly studied. It is shown that Andrew Johnston (National matrix damage decreases Research Council), Benoit significantly the compresSimard (National Research sive strength. Council)
Approaches are presented for creating composites which exhibit pseudo-ductile behaviour. These include discontinuous composites, pre-weakened composites and composites exploiting waviness. 3117-2 EXPLORING THE POTENTIAL OF HIERARCHICAL COMPOSITE FIBRE BUNDLES TO IMPROVE THE TENSILE PERFORMANCE OF UNIDIRECTIONAL COMPOSITES Gael Grail (Imperial College London), Marie Coq (Imperial College London), Soraia Pimenta (Imperial College London), Silvestre T. Pinho (Imperial College London), Paul Robinson (Imperial College London) A numerical study on the ability of hierarchical composites (i.e. small FRP bundles embbeded in a soft matrix) to reduce stress concentrations near clusters of broken fibres and delay final failure.
M5
M6
M7
3119 Applications Aerospace 5
3120 New Structural Testing Methods 1
3118-1 POST-FIRE TENSILE PROPERTIES OF SANDWICH COMPOSITES Aslina Anjang (RMIT University), Mark Spiteri (RMIT University), Venkata Chevali (RMIT University), Stefanie Feih (Singapore Institute of Manufacturing Technology), Adrian Mouritz (RMIT University)
3119-1 DEVELOPMENT AND INVESTIGATION OF A HYBRID CURVATUREMORPHING SKIN STRUCTURE André Schmitz (TU Braunschweig), Peter Horst (TU Braunschweig)
3118-2 FIRE STRUCTURAL PERFORMANCE OF AEROSPACE CARBON FIBRE-EPOXY COMPOSITES Katherine Grigoriou (RMIT University ), Adrian Mouritz (RMIT University)
3119-2 STRUCTURAL DESIGN OF THE DTU-ESA MM-WAVE VALIDATION STANDARD ANTENNA Kim Branner (Technical University of Denmark), Peter Berring (Technical University of Denmark), Christen Malte Markussen (Technical University of Denmark), Oleksiy S. Kim (Technical University of Denmark), Rolf Jørgensen (TICRA), Sergey Pivnenko (Technical University of Denmark), Olav Breinbjerg (Technical University of Denmark)
A new curvature-morphing skin structure is presented. Large bending fatigue in A validated thermal-memorphing-direction and chanical model for calcutransverse strength (avoidlating the residual stiffness ance of buckling of rubber and strength of burnt sand- embedded composite bunwich composite structures dles) is focused on. following fire exposure is presented.
This paper presents a comparative study into the fire performance of four quasi-isotropic laminates with different stacking sequences of the +45/45/90/0 plies.
A new validation antenna is designed in cooperation between DTU and TICRA for European Space Agency. The antenna is designed using CFRP and Invar36 to be extremely thermally and mechanically stable.
programme M8
3121 Multifunctional Composites - Sensing and Actuation 6 3120-1 MEASUREMENT 3121-1 SELF SENSING OF IN-PLANE RESIDUAL GLASS/EPOXY CROSSSTRESSES IN AN AS4/8552 PLY LAMINATES FOR COMPOSITE LAMINATE DAMAGE MONITORING USING THE DEEP-HOLE UNDER FATIGUE LOADING: DRILLING METHOD MODELLING AND C. Garza (University EXPERIMENTS of Bristol), D. J. Smith Paolo Andrea Carraro (University of Bristol), A. (University of Padova), Shterenlikht (University of Michele Zappalorto Bristol), M. Pavier (University (University of Padova), of Bristol) Marino Quaresimin (University of Padova), The in-plane residual Francesco Panozzo stresses in an AS4/8552 (University of Padova) composite laminate are experimentally measured A solution is presented using the Deep-Hole Drilling to predict the variation of and compared to finite ele- the electrical resistance in ment predictions and classi- crossply laminates, caused cal lamination theory. by matrix cracking. The accuracy of the model is verified by comparison to FE analyses.
3120-2 AN INNOVATIVE MECHANICAL TESTING METHOD FOR MEASURING YOUNG’S MODULUS OF MULTI-LAYERED MATERIALS (OWN-WEIGHT CANTILEVER METHOD) Atsumi Ohtsuki (Meijo university) Considering large deformation behaviors due to own-weight, an innovative method is developed to measure Young’s modulus of each layer in a flexible multi-layered materials (thin plate, rod, wire).
3121-2 BIOCOMPOSITE SUBSTRATES FOR WIRELESS SOIL SENSORS Chad Ulven (North Dakota State University), Mitchel Nordahl (North Dakota State University), Frederik Haring (North Dakota State University), Justin Hoey (North Dakota State University), Robert Sailer (North Dakota State University) Biocomposites of flax fiber reinforced polylactic acid were demonstrated as potential substrates for biobased circuit boards used to fabricate wireless soil sensors.
This study focuses on the development of nanocomposites based on impregnation of boron nitride nanotube (BNNT) buckypaper using a low viscosity aerospace grade epoxy.
59
Scientific programme · Wednesday 22 July Congress Hall A 10:10 3101-3 INNOVATIVE EQUIPMENT CONCEPTS FOR COATING OF COMPOSITE PRODUCTS WITH DUROPLASTIC AND THERMOPLASTIC ADHESIVES. Ludger Michels (Coatena Coating Machinery GmbH)
Auditorium 15 3102-3 DEVELOPMENT OF POLYMER NANOCOMPOSITES REINFORCED BY CARBON NANOTUBES WITH 3-D NETWORKS Linfang Cui (The Xinjiang Technical Institute of Physics and Chemistry-Chinese Academy of Sciences), Growing market and new pol- Peng-Cheng Ma (The Xinjiang ymer and fabric developments Technical Institute of Physics demand new and highly and Chemistry-Chinese innovative impregnation and Academy of Sciences) coating machinery concepts for all kind of prepregs. CNT foam as reinforcement for polymer nanocomposites was developed, ultimately eliminating the problems associated with the dispersion and agglomeration of CNTs in polymers.
10:30 3101-4 A STOCHASTIC APPROACH TO MODEL VOID FORMATION DURING OUTOF-AUTOCLAVE PREPREG CONSOLIDATION Rhena Helmus (Technische Universität München), Pascal Hubert (McGill University), Roland Hinterhoelzl (Technische Universität München) A description of mathematical models available in stochastics that are suitable to account for variability in Out-of-Autoclave prepregs which may result in voids after material processing.
10:50 Coffee in the Exhibition
60
3102-4 EFFECT OF THE CRYSTALLINITY ON THE BARRIER PROPERTIES OF PLA BASED NANOCOMPOSITES Jon Trifol (DTU), Caglar Mericer (University of Bologna), Anders Egede Daugaard (DTU), Cecile Sillard (Grenoble INP - Pagora), Ole Hassager (DTU), David Plackett (The University of British Columbia), Julien Bras (Grenoble INP - Pagora), Marco Giacinti (University of Bologna), Peter Szabo (DTU)
Auditorium 10 3103-2 BLAST PERFORMANCE OF COMPOSITE SANDWICH STRUCTURES Mark Kelly (Imperial College London), Hari Arora (Imperial College London), Alex Worley (Imperial College London), Paolo Del Linz (Imperial College London), Alexander Fergusson (Canterbury Court-1-3 Brixton Road), Paul Hooper (Imperial College London), Brian Hayman (University of Oslo), John Dear (Imperial College London) Full scale air blast testing and finite element analysis on underwater blast testing performed on sandwich composite materials, to assess their suitability for naval applications.
3103-3 A FLUID/SOLID MODEL FOR COMPOSITE SANDWICH SHELLS UNDER WATER BLAST Michelle Hoo Fatt (Univ of Akron), Dushyanth Sirivolu (Univ of Akron)
Auditorium 11 3104-3 AN APPROACH TO IDENTIFY MULTIAXIAL FATIGUE LIFE MODEL DEDICATED TO WIND TURBINE BLADES Damien Caous (I2M), Christophe Bois (I2M), JeanChristophe Wahl (I2M), Thierry Palin-Luc (I2M), Julien Valette (TENSYL)
Auditorium 12 3105-3 A TWO-PLY TERMINATION STRATEGY FOR MECHANICALLY COUPLED TAPERED LAMINATES Christopher York (University of Glasgow)
Meeting room 18 3106-3 EXPERIMENTAL INVESTIGATION OF PROCESS INDUCED DEFORMATIONS OF CFRP COMPOSITES WITH FOCUS ON FAST CURING EPOXY RESINS Fabian Groh (German Aerospace Center), Erik Kappel (German Aerospace Center), Christian Hühne (German Aerospace Center)
A two-ply termination algorithm is used to develop permissible tapered designs, An approach is proposed to with ply contiguity constraints, investigate multiaxial cyclic giving consistent mechanical Experimental study on prostress states in non crimp coupling characteristics and cess induced deformations fabrics wind turbine blade immunity to thermal warping. of composites with focus plies and laminates, and idenon fast curing epoxy resins. tify critical stress states. Including experimental parametric study, comparison of resin systems and simplified modelling.
3104-4 INTER FIBRE CRACKING BEHAVIOUR OF CFRP UNDER VERY HIGH CYCLE FATIGUE LOADING: EXPERIMENTAL AND NUMERICAL MULTI-SCALE APPROACH Gordon Just (TU Dresden), Ilja The water blast response of a Koch (TU Dresden), Maik Gude composite sandwich panel is (TU Dresden) examined. Blast resistances under water blast/air back, An energy based approach to water blast/water back and model the fatigue behavior of air blast/air back conditions CFRP under VHCF loading is are compared. proposed. Verification with experimental results for off-axis cracking in tension and bendThe nanocellulose is an effecing shows good agreement. tive filler to improve the barrier properties of PLA, specially when it is combined with clay decreases the water diffusition through the matrix.
3105-4 ENERGY METHOD FOR BUCKLING OF CFRP INTERCONNECTED PLATES WITH ARBITRARY BOUNDARY CONDITIONS. Jose Antonio Martín Esteban (Airbus Operations S.L.)
3106-4 MEASUREMENT AND SIMULATION OF EDGE DEFECTS IN TURNING OF SICP/AL COMPOSITES Li Zhou (Shenyang)
SiC particle reinforced Al matrix (SiCp/Al) composites An energy method based on exhibit excellent physical the Rayleigh-Ritz approach and mechanical properties is developed for the determi- compared with conventional nation of the critical buckling materials, such as high loads of structures formed by specific modulus, improved a set of interconnected com- resistance to posite plates.
Meeting room 19 3107-3 VARIABILITY OF PERMEABILITY IN FIBRE PREFORMS MANUFACTURED WITH AFP Mikhail Matveev (The University of Nottingham), Andrew Long (The University of Nottingham), Arthur Jones (The University of Nottingham)
Meeting room 20 3108-3 QUALIFICATIONS FOR STRENGTH: TENSILE PROPERTIES OF BACTERIAL CELLULOSE NANOPAPERS Katri Kontturi (Imperial College London), Koon-Yang Lee (University College London), Eero Kontturi (Aalto University), Alexander Bismarck (Imperial College Geometry of Automated Fibre London) Placement (AFP) preforms is analysed by means of image Above a minimum threshold analysis. Results of the anal- grammage, the loose nanoysis are used for prediction of fibrous bacterial cellulose realistic variability of permea- network transits into nanobility in the preforms. paper possessing sufficient mechanical strength.
Meeting room 17 3109-3 IMPROVING THE INTERFACE IN CARBON FIBRE REINFORCED COMPOSITES WITH VARIABLE STIFFNESS Henry Maples (University of Vienna), Damilola Smith (Imperial College London), Christoph Burgstaller (Transfercenter für Kunststofftechnik (TCKT)), Paul Robinson (Imperial College London), Alexander Bismarck (University of Vienna)
Meeting room 16 3110-3 EXPERIMENTAL CHARACTERIZATION AND NUMERICAL MODELING OF BEARING BEHAVIOUR OF 3D INTERLOCK WOVEN COMPOSITES Richard Mounien (SAFRAN), François-Xavier Irisarri (ONERA), Christian Fagiano (ONERA), Bastien Tranquart (SAFRAN), Nicolas Carrère (ENSTA-BRETAGNE/LBMSBrest)
3107-4 MODELLING OF COMPRESSION MOULDING PROCESS CYCLE TIME AND APPLICATION OF DFMA CONCEPT TO EVALUATE THE TOOLING COSTS FOR CARBON FIBER REINFORCED THERMOPLASTIC COMPOSITES T-SHAPE PARTS Anh Dung Ngo (Ecole de technologie superieure), Mohamed EL Wazziki (Ecole de technologie superieure)
3109-4 ASSESSMENT OF INTERFACIAL ADHESION BETWEEN CARBON FIBER AND EPOXY BY TRANSVERSE FIBER BUNDLE AND SINGLE FIBER FRAGMENTATION TESTS Guocheng Qi (Beihang University), Jiaxin Liu (Beihang University), Yalin Yu (Beihang University), Boming Zhang (Beihang University), Shanyi Du (Beihang University)
3110-4 USING A POLYESTER POWDERCOATING FOR THE INTERLAMINAR TOUGHENING OF GLASS/ EPOXY COMPOSITE LAMINATES Lode Daelemans (Ghent University), Sam van der Heijden (Ghent University), Ives De Baere (Ghent University), Hubert Rahier (Vrije Universiteit Brussel), Wim Van Paepegem (Ghent University), Karen De Clerck (Ghent University)
The simulated compression moulding process cycle time and the estimated mould costs for carbon fiber reinforced thermoplastic composites T-shape parts were validated
An experimental approach to characterize the bearing An investigation into how behaviour of 3D woven improving adhesion at the in- composites is presented. terleaf/CFRP interface affects Experimental setups descripthe mechanical properties of tion and damage and failure interleaved composites with mechanisms analysis are controllable stiffness. carried out.
This work concentrates on contrasting interfacial normal strength and interfacial shear strength results separately from the transverse fiber bundle test and fragmentation test.
In this study we will show that a proper selection of bisphenol A based polyester binder (FILCO, ATLAC, …) concentration increase the mechanical properties of GFRP laminates.
Wednesday 22 July · Scientific Meeting room 5 3111-3 A STUDY ON GEOMETRICAL PARAMETERS INFLUENCING THE MECHANICAL SPREADING OF FIBER BUNDLES Maximilian Tonejc (Processing of Composits ), Ewald Fauster (Processing of Composits), Ralf Schledjewski (Processing of Composits)
Meeting room 6 3112-2 WIDEBAND, FLEXIBLE AND HIGH PERFORMANCE EMI SHIELDING THIN FILM BASED ON GRAPHENENANOTUBE-IRON 3D NANOSTRUCTURE Si-Hwa Lee (KAIST), Il-Kwon Oh (KAIST)
To fully understand the mechanisms which influence geometrical behaviour of direct rovings a study on spreading was carried out, via rollers causing mechanical deflection.
Meeting room 7 3113-3 THE STUDY OF HCL PENETRATION BEHAVIOR INSIDE OF AN UNSATURATED POLYESTER RESIN UNDER TEMPERATURE GRADIENT TO SIMULATE THE ACCIDENTAL ROOF FAILURE OF FRP OUTDOOR STORAGE TANK CONTAINING HIGH CONCENTRATION HCL SOLUTION Pradchar Pradyawong (Tokyo Institute of Technology), Masatoshi Kubouchi (Tokyo Institute of Technology), Saiko Aoki (Tokyo Institute of Technology), Tetsuya Sakai (Nihon University)
M1 3114-3 STIFFNESS CRITICAL DAMAGE ENVELOPES FOR MULTIDIRECTIONAL COMPOSITE LAMINATES UNDER MULTIAXIAL LOADING CONDITIONS John Montesano (University of Toronto), Chandra Veer Singh (University of Toronto)
A study aims to investigate a roof failure of FRP chemical tank containing high HCl. Temperature gradient experiment show significantly affect to the strength of UP resin , which decrease about 50%. 3111-4 MECHANICAL CHARACTERISATION OF COMPOSITES WITH 3D-WOVEN REINFORCEMENT Tomas Ekermann (Lightweight Structures), Stefan Hallström (Lightweight Structures)
3112-3 SYNTHESIS OF GRAPHENENANOPLATES FROM ORGANOCLAY TEMPLATES AND THEIR REINFORCEMENT IN THERMOSET POLYMER Vijaya Rangari (Tuskegee University), Emmanuel Akugre (Tuskegee University), Shaik Jeelani (Tuskegee University)
3113-4 MECHANICAL PROPERTIES OF A HIGH STRENGTH ALUMINIUM ALLOY DEVELOPED THROUGH POWDER METALLURGY Hippolyte Queudet (FrenchGerman Research Institute of Saint-Louis), Sébastien Lemonnier (French-German Carbon/epoxy composite Research Institute of Saintspecimens, with fully Louis), Elodie Barraud interlaced 3D-woven rein- In this research we have (French-German Research forcement, were tested and successfully synthesized Institute of Saint-Louis), the results are presented. graphene platelets by Nathalie Allain (Université de Focus is on the weave arsimple autogenic pressure Lorraine), Thierry Grosdidier chitecture’s influence on the reaction. The as synthesized (Université de Lorraine), mechanical properties. materials is characterized Eric Gaffet (Université de using Rama spectrometer Lorraine) and X-ray diffraction.
3114-4 MODE I FRACTURE TOUGHNESS OF TRANSVERSELY LOADED LAYERS OF GFRP’S FABRICATED WITH DUCTILE MATRICES Davi Montenegro (Inspire AG), Francesco Bernasconi (ETH Zurich), Rafael Libanori (ETH Zurich), Markus Zogg (Inspire AG), Paolo Ermanni (ETH Zurich), André Studart (ETH Zurich)
M2 3115-3 MICROMECHANICAL MODELING OF THE NONLINEAR DEFORMATION OF LFTS UNDER CONSIDERATION OF THE EFFECTS OF INTERFACE DAMAGE Sascha Fliegener (Fraunhofer Institute for Mechanics of Materials IWM), Jörg Hohe (Fraunhofer Institute for Mechanics of Materials IWM), Benedikt Haspel (Karlsruhe Institute of Technology KIT), Kay André Weidenmann (Karlsruhe Institute of Technology KIT)
M5 3118-3 SIMULATION OF DELAMINATION AND COLLAPSE OF A FIRE EXPOSED FRP COMPOSITE BULKHEAD Kim Olsson (SP Technical Research Institute of Sweden), Johan Sandström (SP Technical Research Institute of Sweden), Joakim Albrektsson (SP Technical Research Institute of We developed an analytical Sweden), Johan Anderson model and a manufacturing (SP Technical Research technique which allowed us Institute of Sweden) to promote and control the formation of large bundle Finite element simulation pull-outs during translam- of large scale fire tests inar fracture of composite on sandwich composite The key focus includes laminates. bulkheads. TemperatureFiber debonding is evalunderstanding the chemical degradation induced uated by fiber pushout network structure of the delamination and collapse, experiments. The results are bulk matrix and the intersimulated in 2D and 3D fed into a micromechanical phase in PMC and property and compared to tested model (RVE) of LFT. Interface evaluation by experiment behavior. damage inside the nonwo- and simulation. ven structure is visualized by FE-simulation.
3115-4 DAMAGE BEHAVIOR IN ANGLEPLY CFRP LAMINATES WITH DIFFERENT PLY THICKNESS Nurul Nabihah A Hamid (Tokyo University of Science), Shinji Ogihara (Tokyo University of Science)
Nowadays, CFRP is being widely used especially in aircraft industry in regards to its strength and In this work we analyze the light-weighted properties. flexural behavior (0º and A unidirectional CFRP lami90º) and mode I intralaminar nates has high stiffness and fracture toughness (90º) of strength in its fib unidirectional GFRPs fabricated either with an epoxy or a thermoset polyurethane resin.
M3 3116-3 CHEMICAL, MORPHOLOGICAL AND MECHANICAL CHARACTERIZATION OF THE INTERPHASE OF POLYMER MATRIX COMPOSITES Dhriti Nepal (Universal Technology Corporation), Allison Echer (Universal Technology Corporation), James Moller (Miami University), Steve Barr (Universal Technology Corporation), Rajiv Berry (Air Force Research Lab), Timothy Breitzman (Air Force Research Lab)
3116-4 TUNING INTERFACE VIA MULTISCALE MODELING FOR SUPERIOR CARBON NANOTUBE-POLYMER NANOCOMPOSITES/ YARNS Elif Ozden-Yenigun (Istanbul Technical University), Canan Atilgan (Sabanci University), James Elliott (University of Cambridge) This study is concerned with finding an improved route to achieve superior properties of carbon nanotube (CNT)reinforced nanocomposites by designing their interface using multi-scale modeling.
M4 3117-3 BIO-INSPIRED MICROSTRUCTURE DESIGN TO IMPROVE TRANSLAMINAR FRACTURE TOUGHNESS OF THIN-PLY COMPOSITES Gianmaria Bullegas (Imperial College London), Silvestre T. Pinho (Imperial College London), Soraia Pimenta (Imperial College London)
3117-4 USE OF INTERMITTENT INTERFACES AND WEAKENED PLIES TO ACHIEVE PSEUDODUCTILITY IN CARBONEPOXY COMPOSITES Omar Bacarreza (Imperial College London), Paul Robinson (Imperial College London) The deliberate introduction of defects in unidirectional carbon fibre composites was studied as a means of producing a pseudo-ductile tensile stress-strain behaviour.
3118-4 EFFECT OF DOPOBASED COMPOUND ON THE FLAMMABILITY AND MECHANICAL PROPERTIES OF RAMIE/POLY(LACTIC ACID) COMPOSITES Tao Yu (Tongji University), Yan Li (Tongji University) Flame retardant ramie reinforced PLA composites were prepared loaded with DOPO-COOH by twin-screw extruder. DOPO-COOH in the composites are proved to be very effective to improve flame retardancy.
M6 3119-3 UNDERSTANDING VOLTAGE AND CURRENT DISTRIBUTION OF COST EFFECTIVE CARBON COMPOSITE TEST SAMPLES FOR AIRCRAFT LIGHTNING STRIKE TESTS Giuseppe Mastrolembo (Cardiff University), A. Manu Haddad (Cardiff University), Matthew Cole (Airbus Group Innovations), Simon Evans (Airbus Group Innovations)
programme
M7 3120-3 DAMAGE DETECTION OF COMPOSITE LAMINATES BASED ON VIBRATION TESTING Zheng Li (Peking University), Kan Feng (Peking University)
M8 3121-3 ARTIFICIAL HAIR SENSORS FROM STRUCTURAL MICROFIBERS AND CNT ARRAYS FOR EMBEDDED FLOW SENSING Keith Slinker (Air Force A superposed waveform Research Laboratory), method (SWM) is proposed Corey Kondash (Air Force as a fast, easy and universal Research Laboratory), vibration-based damage Matthew Maschmann (Air detection technique of com- Force Research Laboratory), posite structures, especially Benjamin Severin (Federal at high frequencies. Republic of Germany Current distribution within a Liaison Office for Defense laminated CFRP sample with Material USA/Canada), a fastener at its center and Gregory Reich (Air Force voltage drop between the Research Laboratory), current injection point and Benjamin Dickinson (Air the grounding system using Force Research Laboratory), a parametric simulation Jeffrey Baur (Air Force Research Laboratory) Artificial hair sensors for air flow detection or structural monitoring are fabricated from S2 microfibers and CNT arrays to transduce small force or displacement changes into changes in resistance. 3120-4 DOUBLE BEAM SHEAR (DBS) – A NEW TEST METHOD FOR DETERMINING INTERLAMINAR SHEAR PROPERTIES OF COMPOSITE LAMINATES Gang Zhou (Loughborough University), Pete Nash (Loughborough University), Joanne Whitaker (Loughborough University), Nicholas Jones (Nicholas Jones and Associates Ltd) Loughborough University has developed a new interlaminar shear test method, called the Double Beam Shear, It not only guarantees ILS failure but also provides greater ILS strength.
61
Scientific programme · Wednesday 22 July Congress Hall A Auditorium 15 3202 Nano Composites 7 11:20 3201 Processing Manufacturing Technology 7
Auditorium 10 3203 ONR Special Symposium on Marine Composites 2
Auditorium 11 3204 Fatigue 7
11:20 3201-1 EFFECTS OF PROCESSING CONDITIONS IN UNIDIRECTIONAL CARBON FIBER THERMOPLASTIC TAPE LAYING Daiki Tanabe (Osaka university), Kazuaki Nishiyabu (Kinki university), Tetsusei Kurashiki (Osaka university)
3203-1 LOW TEMPERATURE IMPACT OF COMPOSITE HULL WALL WITH FLOATING RIGID BODY Giancarlo Caprino (University of Naples “Federico II”), Antonio Langella (University of Naples “Federico II”), Valentina Lopresto (University of Naples “Federico II”)
KEYNOTE
3205-1 FORCED VIBRATION ANALYSIS 3204-1 MICROSCOPIC AND OPTIMIZATION OF DAMAGE EVOLUTION IN OFF- MODERATELY-THICK FIBER AXIS PLIES UNDER FATIGUE STEERED LAMINATES WITH LOADING EMBEDDED GAPS AND Marino Quaresimin (University OVERLAPS of Padova), Lucio Maragoni Abdolhamid Akbarzadeh (University of Padova), Paolo Shafaroudi (McGill University), A. Carraro (University of Mahdi Arian Nik (McGill In this study, the effects of Padova) University), Damiano Pasini processing parameters for Experimental activity to (McGill University) carbon fiber thermoplastic This study is concerned assess the impact behavior Glass/epoxy laminates were tape laying using near infra- with structure-property at room and low temperature tested under fatigue loading Numerical results have red heater was investigated to relationships in different of laminates used in the ship- to observe the damage evolu- shown that plates with gaps predict the optimum process- types of CNTs, in particular building industry. Impacts of tion in the off-axis plies. The have a higher amplitude of ing conditions. investigating both interfacial a hull with a solid body in the first event was the initiation dynamic deflection and a and internal stress transfer for water were reproduced. of sub-micro cracks in the lower response frequency CNTs in nanocomposites. matrix between the fibres. compared to a defect-free plate, as opposed to a plate with overlaps.
11:40 3201-2 FLEXURAL PERFORMANCE AND PROCESS CONDITIONS OF THERMOPLASTIC COMPOSITE LAMINATES PROCESSED BY AUTOMATED TAPE PLACEMENT Norimichi Nanami (Nagoya University), Takashi Sato (Nagoya University), Tadashige Ikeda (Nagoya University), Takashi Ishikawa (Nagoya University) The feasibility and advantages of in-situ consolidated thermoplastic laminates are investigated through experimental and computational work to assess their flexural performance.
62
3202-1 INTERFACIAL AND INTERNAL STRESS TRANSFER IN CARBON NANOTUBE BASED NANOCOMPOSITES Robert Young (University of Manchester), Ian Kinloch (University of Manchester), Libo Deng (Chinese Academy of Sciences), Tamer Wafy (Military Technical College)
Auditorium 12 3205 Structural Analysis and Optimization 7
3202-2 DEVELOPING COMPONENT-SCALE HEIRARCHICAL COMPOSITES USING PLASMA FUNCTIONALISED NANOCARBONS Mark Eaton (Cardiff University), Wayne Ayre (Cardiff University), Martin Williams (Haydale Limited), Rhys Pullin (Cardiff University), Samuel Evans (Cardiff University)
3203-2 EFFECT OF FRIGID TEMPERATURES ON THE DYNAMIC PROPERTIES OF FIBER REINFORCED MARINE COMPOSITES Maen Alkhader (Stony Brook University), Fu-Pen Chiang (stony brook university) Fibre reinforced composites, such as carbon reinforced vinyl-ester, are increasingly being considered as practical structural materials for current and new classes of civilian and military naval craft
3205-2 ROBUST AEROELASTIC OPTIMISATION OF COMPOSITE WINGS SUBJECT TO MATERIAL PROPERTY AND MANUFACTURING UNCERTAINTY Carl Scarth (University of Bristol), Pia Sartor (University of Bristol), Jonathan Cooper (University of Bristol), Paul Weaver (University of Bristol), Gustavo Silva (Embraer S.A.) An efficient approach using adaptive surrogate modelling techniques is presented for the robust aeroelastic optimisation of composite plate wings with manufacturing uncertainty in the plies.
Meeting room 18 3206 Process Induced Effects 6
Meeting room 19 3207 Process Modelling 7
Meeting room 20 3208 Biocomposites 6
3206-1 INFLUENCE OF THE THERMO-MECHANICAL PROPERTIES ON THE PREDICTIONS OF THE CUREINDUCED DEFORMATIONS IN THERMOSET-BASED COMPOSITE PARTS Antoine Parmentier (Cenaero), Benoît Wucher (Cenaero), David Dumas (Cenaero)
3207-1 PREDICTION OF AUTOCLAVE CURING OF AERONAUTICAL COMPOSITES PARTS AND OF RESULTING SPRING-IN THROUGH ESI COMPOSITES SIMULATION SOLUTION Laurent Dufort (ESI Group), Jia Lijie (Shanghai Aircraft manufacturing ), Liu Weiping (Shanghai Aircraft manufacturing), Yan Dongxiu (Shanghai Aircraft manufacturing)
3208-1 OPPORTUNITIES FOR BIO-BASED COMPOSITES IN ADVANCED INDUSTRIAL SECTORS Maya John (CSIR), Steve Chapple (CSIR)
The present study aims at determining the numerical model complexity in terms of material properties and boundary conditions allowing to predict the cure-induced spring-in with sufficient accuracy.
3206-2 SHAPE DISTORTION ANALYSIS OF A COMPLEX SHAPED WING SKIN SECTION Erik Hörberg (Saab AB), Tonny Nyman (Saab AB), Thomas Hellström (Saab AB), Mats Rudlund (Saab AB), Jonas Bohlin (Saab AB), Rolf Berg (Saab AB)
Prediction of autoclave curing of SAMC aeronautical composites parts and resulting spring-in through ESI Composites Simulation Solution (funding from BPI Fr N°A1207028 Q & ISTCP N°2013DFG52420)
3207-2 3D THERMOMECHANICAL MODEL BASED SIMULATION OF THE WELDING OF THERMOPLASTIC COMPOSITE TAPE USING AUTOMATED TAPE LAYING (ATL) PROCESS Yann Duplessis Kergomard (ESI GROUP), Britto Satheesh (Montanuniversität Leoben), Laurent Dufort (ESI GROUP), Ralf Schledjewski (Montanuniversität Leoben)
In the Clean Sky programme Saab has developed a cocured fully integrated carbon fibre upper wing-cover. This paper covers the shape This paper presents the distortion analysis and tooling works done in the STELLAR technology used. project about the 3D thermo-mechanical model based simulation of the welding of thermoplastic composite tape using Automated Tape Laying process.
Meeting room 17 3209 Interfaces and Interphases 7
3209-1 EFFECTS OF THERMAL HISTORIES ON CARBON FIBER/POLYAMIDE 6 MICROCOMPOSITE LOAD TRANSFER EFFICIENCY: MEASUREMENT, INTERFACE, CRYSTALLIZATION AND The presentation highlights MODULUS recent research at the Council Hongfu Li (Beihang for Scientific and Industrial University), Boming Zhang Research (CSIR), South Africa (Beihang University), Yang on bio-composites for adWang (Beihang University) vanced industrial applications. Load transfer efficiencies of single carbon fiber reinforced PA 6 microcomposites with different cooling rates and annealing treatments were measured by electrical resistance method.
Meeting room 16 3210 Damage Tolerance of Composite Structures 2
KEYNOTE 3210-1 CONSTITUTIVE MODELING AND EXPERIMENTAL CHARACTERIZATION OF THE NON-LINEAR STRESSSTRAIN BEHAVIOR OF UNIDIRECTIONAL CARBONEPOXY UNDER HIGH STRAIN RATES Matthias Vogler (Leibniz University Hannover), Hannes Koerber (Technical University of Munich), Peter Kuhn (Technical University of Munich), Raimund Rolfes (Leibniz University Hannover), Pedro Camanho (University of Porto) The mechanical response of IM7-8552 carbon epoxy was investigated and simulated for transverse tension and transverse tension / in-plane shear loadings at static and dynamic strain rates.
3208-2 MECHANICAL PERFORMACE OF NCC-FOAM Peter Mannberg (Swerea SICOMP AB), Birgitha Nyström (Swerea SICOMP AB), Fredrik Ahlqvist (Swerea SICOMP AB)
3209-2 PATTERNED GLASS FIBER SURFACES - ROUTE TO INTERFACE MODIFICATION? Seethalakshmi Chandramouli (Katholieke University Leuven), Mengshi Liu (Katholieke A newly developed self-asUniversity Leuven), Grim sembling technique for Keulemans (Katholieke crystalline nano cellulose into University Leuven), Frederik foam gives opportunities to Ceyssens (Katholieke tailor properties to a comUniversity Leuven), Larissa petitive material against fos- Gorbatikh (Katholieke sil-based oil based foam. University Leuven), David Seveno (Katholieke University Leuven) The work reports results related to the surface modification of glass fibers, by formation of line-space patterns composed of hydrophilic and hydrophobic functional sequences along the fiber length.
Wednesday 22 July · Scientific Meeting room 5 3211 Textile-Based Composites and Fibre Architecture 7
Meeting room 6 Meeting room 7 3212 Graphene, Graphene- 3213 Matrix Materials 2 Based Composites 7
M1 3214 Fracture and Damage Micromechanics 6
M2 3215 Models Homogenization – Micro to Macro 2
3211-1 RATE-DEPENDENT BEHAVIOR OF ARAMID FIBERS COATED WITH SHEAR THICKENING FLUIDS Sungjin Han (Seoul national university), Wonjin Na (Seoul national university), Hyunchul Ahn (Seoul national university), Woong-Ryeol Yu (Seoul national university)
3212-1 MELT PROCESSING AND PROPERTIES OF POLYAMIDE 6/GRAPHENE NANOPLATELET COMPOSITES Beatriz Mayoral (Queen’s University), Eileen HarkinJones (University of Ulster), Noorunnisa Khanam (Qatar University), Mariam Alali Al Maadeed (Doha), Mabrouk Ouederni (Qatar Petrochemical Company), Andrew Hamilton (Queen’s University), Dan Sun (Queen’s University)
3214-1 COMPUTATIONAL MICROMECHANICS APPLIED TO POLYMER MATRIX COMPOSITES: FIBER-DEPENDENT PROPERTIES Fernando Naya (IMDEA Materials), Miguel Monclús (IMDEA Materials), Carlos González (Polytechnic University of MadridETSCCP), Jon M. MolinaAldareguia (IMDEA Materials), Claudio Lopes (IMDEA Materials)
3215-1 STRENGTH PREDICTION FOR TEXTILE COMPOSITES USING ARTIFICIAL NEURAL NETWORK, PRINCIPLE COMPONENT ANALYSIS AND UNIT CELLS Qing Pan (University of Nottingham), Elena Sitnikova (University of Nottingham ), Shuguang Li (University of Nottingham)
3213-1 MECHANICAL PERFORMANCE OF NOVEL HIGH TG POLYIMIDE MATRIX CARBON FIBREREINFORCED LAMINATES Spyros Anastasios Tsampas (Swerea SICOMP AB), Patrik Sven Fernberg (Swerea SICOMP AB), Roberts Joffe (Luleå University of Technology)
In this study, the shear stress of STF-coated single aramid fiber was evaluated by single fiber pull-out test. The rate-dependent behavior can be ascribed to Processing and characthe STF effects at microsterization (morphological, cale level. thermal, mechanical and electrical properties) of Polyamide 6 (PA6)/graphite nanoplatelets (GNPs) composites prepared by melt-mixing extrusion.
Mechanical properties of a newly developed carbon fiber/polyimide composite T650/NEXIMID® MHT-R with exceptionally high Tg (~370-420°C) are evaluated and compared with other commercial materials.
3211-2 THE EFFECT OF PREFORMING QUALITY ON THE PERMEABILITY OF NON-CRIMP FABRICS AND THE MECHANICAL PROPERTIES OF THEIR COMPOSITES Long Li (Beihang University), Yan Zhao (Beihang University), Xiaoran Zhao (Beihang University), Shitai Liu (Beihang University), Gang Liu (AVIC Composites Center), Jianwen Bao (AVIC Composites Center)
3213-2 SYNTHESIS AND CHARACTERIZATION OF CONDUCTIVE CFRP & GFRP USING PANIBASED ELECTRICALLY CONDUCTIVE THERMOSET POLYMER MATRIX Vipin Kumar (The University of Tokyo), Tomohiro Yokozeki (The University of Tokyo), T. Goto (Yamagata University), Tatsuhiro Takahashi (Yamagata University)
3212-2 COMPRESSION BEHAVIOUR OF GRAPHENE FLAKES OF VARIOUS THICKNESSES EMBEDDED IN POLYMER MATRICES Charalampos Androulidakis (ICEHT/FORTH), Georgia Tsoukleri (ICEHT/FORTH), Emmanuel Koukaras (ICEHT/FORTH), Dimitris Sfyris (ICEHT/FORTH), John Parthenios (ICEHT/FORTH), Konstantinos Papagelis (ICEHT/FORTH), Costas Galiotis (ICEHT/FORTH)
In the present work, PANI-based electrically Shear deformation, permea- COMPRESSION BEHAVIOUR conductive matrix used to bility of the non-crimp fabric OF GRAPHENE FLAKES OF prepare conductive therand mechanical behavior VARIOUS THICKNESSES mosetting FRP composites. of the composites are inEMBEDDED IN POLYMER The conducting component vestigated, after draping MATRICES by J. Parthenios, of the matrix is polyaniline, the reinforcements on a C. Androulidakis, E. N. protonated with DBSA. hemisphere. Koukaras, G. Tsoukleri, D Sfyris, K. Papagelis and C Galiotis
A coupled experimental-computational micromechanical framework has been developed to determine longitudinal mechanical properties of a fiber-reinforced composite lamina.
3214-2 INFLUENCE OF MOLDING OPERATION TIMES ON MECHANICAL PROPERTIES OF THE COMPOSITES PREPARED BY HAND LAY-UP METHOD Masakazu Migaki (Kyoto), Tetsuo Kikuchi (Kyoto Institute of Technology), Hiroyuki Hamada (Kyoto Institute of Technology) Fiber reinforced plastic (FRP) has been referred to a composite material which has been impregnated fiber-reinforcement with curing resin as the base material. FRP is used as an alternative replacemen
M4 M5 3217 Ductile and Pseudo- 3218 Fire Resistance 2 ductile Composites 3
M6 3219 Applications Aerospace 6
M7 3220 New Structural Testing Methods 2
3216-1 MULTI-SCALE MECHANICAL ANALYSIS OF INTERFACE DELAMINATION IN HIGH-TOUGHNESS METAL-ELASTOMER INTERFACES Johan Hoefnagels (Eindhoven University of Technology), Jan Neggers (Eindhoven University of Technology), Olaf Sluis van der (Eindhoven University of Technology), Marc Geers Unit cell and Artificial Neural (Eindhoven University of Network has been employed Technology) to represent the damage initiation and evolution of 3D textile composites under varies loading conditions from micro to macro scale level.
3217-1 ANALYTICAL MODELLING OF PSEUDODUCTILITY IN ANGLE-PLY CFRP LAMINATES WITH CENTRAL UNIDIRECTIONAL PLIES Jonathan Fuller (University of Bristol), Meisam Jalalvand (University of Bristol), Michael R. Wisnom (University of Bristol)
3219-1 MODELLING ACOUSTIC EMISSION EVENTS IN CARBON FIBRE LAMINATES FOR DAMAGE DETECTION AND IDENTIFICATION UNDER STATIC AND CYCLIC LOADS Luiz Kawashita (University of Bristol), Mark Eaton (Cardiff University), Carol Featherston (Cardiff University)
3220-1 TEMPERATURE CONTROLLED HEATED 3-POINT BENDING SET-UP FOR ELEVATED TEMPERATURES Rudi Velthuis (ABB Switzerland - Corporate Research), Jan Van Loon (ABB Switzerland - Corporate Research), Udo Lang (HSLU-Lucerne University of Applied Sciences and Arts)
3215-2 EFFECT OF INTERFACIAL SHEAR STRENGTH ON MECHANICAL PROPERTY OF 4D CARBON/CARBON COMPOSITES Yingqiang Liao (Xi’an aerospace composites research institute)
3217-2 NECKING BEHAVIOUR OF FLATTENED TUBULAR BRAIDED COMPOSITES Mayank Gautam (University of Manchester), Prasad Potluri (University of Manchester), Stephen Ogin (University of Surrey)
average stiffness increases when interfacial shear strength increases , and axial elastic modulus is essentially in accord with experiment test result when the interfacial shear strength is 10.0MPa.
M3 3216 Fracture and Damage - Delamination 6
3216-2 BRIDGE EFFECTS OF Z-PIN ON DAMAGE EVOLUTION OF Z-PIN REINFORCED COMPOSITE T-JOINT: EXPERIMENT AND SIMULATION Yu E Ma (Northwestern Poltechnical University), Rong Hua Du (School of Aeronautics), Pan Fu Xu (Northwestern Polytechnical University)
A new analytical method is developed and subsequently used to predict the pseudo-ductile, metal-like stress-strain responses of thin ply CFRP angle-ply laminates with a central zero ply.
3218-1 FIRE STRUCTURAL PERFORMANCE OF FLAX FIBRE REINFORCED LAMINATES Tanmay Bhat (RMIT University), Venkata Chevali (RMIT University), Adrian Mouritz (RMIT University) The fire structural performance of a flax reinforced polymer matrix composite is experimentally assessed in this paper. Strength loss mechanisms in flax fibres at high temperatures are investigated.
3218-2 CHARACTERISATION OF COMPOSITE MATERIAL BEHAVIOUR UNDER MECHANICAL LOADING AND FIRE EXPOSURE Abdelkibir BENELFELLAH (Institut Pprime UPR 3346 – CNRS – ENSMA – Université de Poitiers), Thi Hai Yen The paper presents a cohe- QUACH (Institut Pprime UPR sive study of effect of braid 3346 – CNRS – ENSMA angle, effect of tow bound- – Université de Poitiers), Both unpinned and z-pinned ary conditions and effect Damien HALM (Institut composite T-joints were of axial tow insertion upon Pprime UPR 3346 – CNRS tested under tension load- mechanical performance – ENSMA – Université de ing. The ultimate strength of flattened tubular braided Poitiers), Thomas ROGAUME and displacements were composites. (Institut Pprime UPR measured, and failure 3346 – CNRS – ENSMA – modes were analyzed. Université de Poitiers), Denis BERTHEAU (Institut Pprime UPR 3346 – CNRS – ENSMA – Université de Poitiers)
programme M8 3221 Multifunctional Composites - Adaptive Response and Reconfiguration 1 3221-1 ACTIVE COMPOSITES AND 4D PRINTING Kai Yu (Georgia Institute of Technology), Yiqi Mao (Georgia Institute of Technology), Martin Dunn (Singapore University of Design and Technology), H. Jerry Qi (Georgia Institute of Technology)
We present the paradigm of printed active composites Techniques for scale-up The paper shows the design and 4D printing where the of hierarchical composite and construction of a heat- shape of a printed 3D object manufacture are presented. able 3-point bending set-up can change upon external Including plasma function- in order to enable faster and stimuli, thus offering one alization of MWCNT and more accurate determina- additional dimension, time. graphene and liquid infusion tion of flexural properties at of stiffened panels up to 0.9 elevates temperatures (to x 0.55m in size. 210 °C).
3219-2 FULL-FIELD THROUGH-TRANSMISSION ULTRASONIC WAVE PROPAGATION IMAGING FOR NONDESTRUCTIVE COMPOSITE INSPECTION Seung-Chan Hong (LANLCBNU Engineering Institute Korea), Jung-Ryul Lee (Korea Advanced Institute of Science and Technology)
3220-2 CRITICAL STRAIN DETERMINATION BASED ON THE EULER-FRESNEL JIG Sotiris Koussios (Delft University of Technology), Katrin Tazelaar (Composites), Bert Rozen (Catholic University of Leuven ), Adriaan Beukers (Delft University of Technology), Rene In this study, full-field pulse- Alderliesten (Delft University echo ultrasonic wave prop- of Technology) agation imaging (UWPI) for nondestructive composite In this paper we present a inspection visualizes the de- novel method for the deterfects induced in composite mination of critical strain structures. on composite strip-formed specimens. The definition “critical strain” reflects here on the strain level at which the fi
3221-2 MATERIALS WITH VARIABLE STIFFNESS Angelika Bachinger (Swerea SICOMP AB), Peter Hellström (Swerea SICOMP AB), Erik Marklund (Swerea SICOMP AB), Gaurav Vyas (Swerea SICOMP AB), Leif E. Asp (Swerea SICOMP AB) Different stiffness-modifiable composite materials were evaluated regarding their mechanical and thermal properties as well as their feasibility for traffic safety applications.
Hydrogen is expected to be valuable energy carrier for the future. To exploit its benefits, a study of thermal degradation property and influence of a fire on residual mechanical behavior is proposed.
63
Scientific programme · Wednesday 22 July Congress Hall A 12:00 3201-3 EFFECTS OF LAYUP ON THE LASER ASSISTED FIBER PLACEMENT PROCESS Thijs Kok (University of Twente), Remko Akkerman (University of Twente), Laurent Warnet (University of Twente), Wouter Grouve (TPRC)
Auditorium 15 3202-3 INFLUENCE OF CARBON NANOTUBES ON HEATING EFFICIENCY OF THE AU NANOPARTICLES SMALL HEAT SOURCE Rongguo Wang (Harbin Institute of Technology ), Chengqin Dai (Harbin Institute of Technology ), Lifeng Hao (Harbin Institute of Technology The interlaminar bond ), Qi Wang (Harbin Institute of strength of laser assisted fiber Technology ), Zhenxing Cao placement produced lami(Harbin Institute of Technology nates is tested. The effects of ), Ping Peng (Harbin Institute laser power and ply orienta- of Technology ), Dongyao tion on fracture toughness are Wang (Harbin Institute of assessed. Technology ), Wenbo Liu (Harbin Institute of Technology ), Weicheng Jiao (Harbin Institute of Technology ), Fan Yang (Harbin Institute of Technology )
We studied the thephotothermal effect of the AuNP in a polymer composites by finite element simulation. Primary research the influence of CNT added to Near the AuNP on temperature distribution. 3202-4 IMPROVING 12:20 3201-4 EFFICIENT POST-MACHINING AND TOUGHNESS AND AUTOMATED REPAIR ELECTRICAL CONDUCTIVITY PREPARATION USING OF EPOXY ADHESIVE ADAPTIVE MACHINING COMPOSITE JOINTS TECHNOLOGY USING ALIGNED CARBON Claus Bremer (BCT GmbH) NANOFIBRES Chun Wang (Sir Lawrence During FRP manufacturing Wackett Aerospace Research and repair, deviations of Centre-RMIT University), Raj composite components from Ladani (Sir Lawrence Wackett nominal shape play a decisive Aerospace Research Centrerole. Adaptive machining RMIT University), Shuying demonstrates great potential Wu (Sir Lawrence Wackett for improved efficiency and Aerospace Research Centrequality. RMIT University), Kamran Ghorbani (RMIT University), Adrian Mouritz (Sir Lawrence Wackett Aerospace Research Centre-RMIT University), Anthony Kinloch (Imperial College)
Auditorium 10 3203-3 MIXED-MODE DEBOND FRACTURE CHARACTERIZATION OF FOAM CORE SANDWICH COMPOSITES UNDER ARCTIC LOW TEMPERATURE CONDITIONS Arash Farshidi (Technical University of Denmark), Christian Berggreen (Technical University of Denmark) Mixed-mode I/II fracture characterization of low temperature fracture properties for typical naval foam core sandwich composites has been carried out using the mixed mode bending (MMB) test fixtrure.
The paper focuses on a new method to evaluate the fatigue strength of thick unidirectional laminates to be applied in spar caps. Therefore, a width-tapered bending specimen was developed and tested.
3204-3 EFFECT OF HIGH TEMPERATURE ON THE FATIGUE LIFE OF A PLAIN WEAVE CFRP LAMINATE UNDER TENSION-TENSION LOADING Martin Cardonne (École de Technologie Supérieure (ÉTS)), Mohamed Khay (École de Technologie Supérieure (ÉTS)), Pierre-Luc Vachon (École de Technologie Supérieure (ÉTS)), Martine Dubé (École de Technologie Supérieure (ÉTS)), Anh Dung Ngô (École de Technologie Supérieure (ÉTS))
Auditorium 12 3205-3 MULTI-MATERIALS SELECTION USING GENETIC ALGORITHM Baracchini Paul (CNRS-I2MUMR 5295), Guillebaud Claire (Univ. Bordeaux-I2M-UMR 5295), Kromm Francois-Xavier (Univ. Bordeaux-I2M-UMR 5295), Wargnier Hervé (Univ. Bordeaux-I2M-UMR 5295) The aim of this study is to propose a multi-material design method allowing a simultaneous selection of architectures and materials using genetic algorithm.
3205-4 STRUCTURAL DESIGN AND STRENGTH ANALYSIS OF THE NEW TANK-CONTAINER WITH COMPOSITE TANK FOR MULTIMODAL TRANSPORTATIONS OF CHEMICALLY AGGRESSIVE FLUIDS AND PETROCHEMICAL PRODUCTS I. Sergeichev (Skoltech), A. Ushakov (Skoltech), A. Safonov (Skoltech), B. Fedulov (Skoltech), W. Brouwer This paper presents exper(Lightweight Structures B.V.), imental results from cyclic M. Timofeev (ApATeCh Co), crack propagation tests Yu. Klenin (ApATeCh Co), A. performed on sandwich spec- In this study, the experimental Fedorenko (Skoltech) imens with glass/epoxy face characterization of the effect sheets and PVC foam cores of a high temperature on A complete cycle of design, using the G-control method. the delamination onset of a manufacturing and finite eleplain weave CFRP laminate is ment strength analysis of the presented. tank-container with fiberglass Aligning carbon nanofillers by composite tank for multimodexternal electric or magnetic al transportation of chemically field can dramatically improve aggressive fluids and pe the mechanical and electric properties of epoxy nanocomposites.
64
3203-4 MIXEDMODE G-CONTROL DEBOND FATIGUE CHARACTERIZATION OF SANDWICH COMPOSITES WITH PVC FOAM CORES Marcello Manca (DTU - Technical University of Denmark), Christian Berggreen (DTU - Technical University of Denmark), Leif A. Carlsson (FAU - Florida Atlantic University)
Auditorium 11 3204-2 FATIGUE LIFE EVALUATION OF SPAR CAP MATERIALS BY FOUR POINT BENDING TEST ON WIDTHTAPERED SPECIMENS Volker Trappe (BAM Federal Institute for Materials research and Testing), Ricardo Basan (Siemens)
Meeting room 18 3206-3 MODELING OF MESO-SCALE VOID FORMATION IN AN ARBITRARY RESIN IMPREGNATION ANGLE OF VARTM Masaki Naito (Tokyo University of Science), Ryosuke Matsuzaki (Tokyo University of Science), Daigo Seto (Tokyo Institute of Technology), Akira Todoroki (Tokyo Institute of Technology)
Meeting room 19 3207-3 NUMERICAL STUDY OF THE INFLUENCE ON THE MAX TEMPERATURE INSIDE THE RESIN MATRIX COMPOSITES WITH DIFFERENT THICKNESS DURING THE EXOTHERMIC CURING PROCESS Fei Sun (Huazhong University of Science and Technology), Dunming Liao (Huazhong University of Science and Technology), Yongzhen Jia (Huazhong University of For the inhibition of the forScience and Technology), Liu mation of void, we evaluated Cao (Huazhong University of the void formation during Science and Technology), Tao VaRTM experiments. Based Chen (Huazhong University of on the experiments, analytical Science and Technology) model developed for predicting the void fraction. Some numerical simulations for resin matrix composites are conducted. The temperature and degree of cure fields are obtained. The max temperature during the exothermic curing is discussed.
3206-4 POROSITY CONTROL BY PROCESS PARAMETERS Cédric PUPIN (École Polytechnique), Annie ROSS (École Polytechnique), Edu RUIZ (Formerly ERFT Composites), Martine DAUCHIER (HERAKLES), Nicolas VERNET (SAFRAN Composites), Bruno DAMBRINE (SNECMA SAFRAN Group) A resol phenolic resin was investigated by TGA. Injection process parameters were chosen based on the results. The appearance of defects were observed directly through the RTM mold window.
3207-4 BENDING OF FIBRE-REINFORCED THERMOPLASTIC TUBES Jan Böcking (University of Siegen), Bernd Engel (University of Siegen)
Meeting room 20 3208-3 WHAT DOES NANOCELLULOSE DO TO THE PROPERTIES OF THERMOPLASTIC NATURAL FIBRE COMPOSITES? Marta Fortea Verdejo (Institute of Materials Chemistry and Research-Faculty of Chemistry), Elias Bumbaris (Institute of Materials Chemistry and ResearchFaculty of Chemistry), KoonYang Lee (Imperial College London), Alexander Bismarck (Imperial College London)
Meeting room 17 3209-3 SURFACE PROPERTIES OF CARBON FIBERS: IMPACT ON THE MECHANICAL PERFORMANCE OF SHORT FIBER REINFORCED POLYPROPYLENE COMPOSITES Christoph Unterweger (Kompetenzzentrum Holz GmbH (Wood K plus)), Jiri Duchoslav (Johannes Kepler University (JKU) Linz), David Stifter (Johannes Kepler University (JKU) Linz), Christian Fürst Bacterial cellulose was shown (Kompetenzzentrum Holz to improve the tensile propGmbH (Wood K plus)) erties of PLA/flax composites by acting as a melt support Impact of carbon fiber surface for PLA. The effect of nanocel- properties and coupling agent lulose on PP/flax composites content on the mechanical was also investigated. performance of short carbon fiber reinforced polypropylene composites
3208-4 NANOFIBRE COMPOSITES FROM CAPRINE BIOMASS Nurul Ain Mohd Kamal (Imperial College London), Koon-Yang Lee (Imperial College London), Alexander A bending process for endless Bismarck (University of fibre reinforced thermoplastic Vienna) tubes is presented. Heating tests are performed and used The demand of milk, meat for validation of a thermal FE and other livestock products analysis. Bending tests are increases every year due to performed and analysed. population growth, urbanization and increasing income in developing countries. This results in a significant increase
3209-4 A 3D MULTISCALE COHESIVE ZONE MODEL ACCOUNTING FOR FRICTION, DAMAGE AND INTERLOCKING Marco Albarella (Universita’ degli studi del Sannio), Roberto Serpieri (Universita’ degli studi del Sannio), Giulio Alfano (Brunel University), Elio Sacco (Università di Cassino e del Lazio Meridionale)
Meeting room 16 3210-2 STATIC AND IMPACT TESTING OF COMPOSITE FAN BLADE LEADING EDGE SUBCOMPONENT DEMONSTRATING IMPROVED DAMAGE TOLERANCE THROUGH THERMOPLASTIC POLYURETHANE INTERLEAVE Sandi Miller (NASA Glenn Research Center), Gary Roberts (NASA Glenn Research Center), Lee Kohlman (NASA Glenn Research Center), Paula Heimann (Ohio Aerospace Institute), Michael Pereira (NASA Glenn Research Center), Charles Ruggeri (NASA Glenn Research Center), Richard Martin (Cleveland State University) The intent of this paper is to evaluate the influence of a thermoplastic polyurethane veil interleave on the static and dynamic performance of composite test articles.
3210-3 MODELLING THE MECHANICAL PROPERTIES OF WRINKLED COMPOSITES FROM NDT DATA Ningbo Xie (University of Bristol), Robert Smith (University of Bristol), Supratik Mukhopadhyay (University of Bristol), Stephen Hallett (University of Bristol)
This paper introduced the process that FE models were This paper presents the latest created to investigate the advances in the development mechanical performance of of CZMs that are able to wrinkled composites, based account for damage, friction on the NDT data obtained and interlocking, including in from 3D-characterisation particular their extension to a techniques. general 3D case.
Wednesday 22 July · Scientific Meeting room 5 3211-3 OLU-PREG® TEXTILE-BASED THERMOPLASTIC NCFCOMPOSITES Stefanie Schindler (Technische Universität Chemnitz), Frank Helbig (Technische Universität Chemnitz), Mike Scheika (SKM – Schwergewebe Konfektion Moers GmbH)
Meeting room 6 3212-3 OPTIMISATION OF THE IN-SITU EXFOLIATION/ DISPERSION PROCESSING PARAMETERS OF GRAPHENE NANOPLATELETS IN EPOXY FOR ENHANCED MECHANICAL AND ELECTRICAL PROPERTIES Yan Li (Queen Mary University of London), Han Zhang (Queen Mary The OLU-Preg® technology University of London), offers lightweight materials Emiliano Bilotti (Queen for large series production Mary University of London), that meet demands for Oliver Picot (Queen Mary structural variability, freeUniversity of London), Ton dom of design, process Peijs (Queen Mary University compatibility - reproducible of London) and recyclable.
Meeting room 7 3213-3 IMPROVED MANUFACTURING METHOD OF P-DCPD USING W, MO OR RU TYPE CATALYSTS IN AIR CONDITION Joung-Man Park (Gyeongsang National University), Zuo-Jia Wang (Gyeongsang National University), Dong-Jun Kwon (Gyeongsang National University), Pyeong-Su Shin (Gyeongsang National University), Jin-Yeong Choi (Gyeongsang National University), Jung-Chan Ha (Doha industry Co.-LTD.), Gyu-Sang Jeong (Doha industry Co.-LTD.), Lawrence DeVries (Doha industry Co.-LTD.)
M2 3215-3 GENERATION OF VIRTUAL FIBER ARCHITECTURES IN STONE WOOL USING A MODIFIED FORCE-BIASED ALGORITHM Lucie Chapelle (Rockwool International A/S), Povl Brøndsted (Technical University of Denmark), Yukihiro Kusano (Technical University of Denmark), Mathilde R. Foldschack (Rockwool International A/S)
M3 3216-3 EFFICIENT FINITE ELEMENT MODELLING OF Z-PIN REINFORCED COMPOSITES USING THE BINARY MODEL Matthew Blacklock (RMIT University), Mathew Joosten (RMIT University), Adrian Mouritz (RMIT University)
M4 3217-3 MODELLING THE NON-LINEAR MECHANCIAL BEHAVIOUR OF TRIAXIAL BRAIDED COMPOSITES Tobias Wehrkamp-Richter (Technische Universität München), Silvestre T. Pinho (Imperial College London), Roland Hinterhölzl (Technische Universität München)
M5 3218-3 FIRE PROTECTED CARBON FIBER REINFORCED PLASTICS FOR STRUCTURAL AIRCRAFT COMPONENTS Imke Roese-Koerner (DLR German Aerospace Center), Benjamin Schuh (DLR German Aerospace Center), Jens Bachmann (DLR German Aerospace Center), Peter Wierach (DLR German Aerospace Center)
M6 3219-3 MECHANICAL TESTING AND FINITE ELEMENT ANALYSIS OF LATTICE STRUCTURE FUSELAGE PROTOTYPE Amirhossein Hajdaei (Element Materials Technology), Vladimir Matěják (Element Materials Technology), Stefanos Giannis (Element Materials Technology)
M7 3220-3 DEVELOPMENT OF A TESTING METHOD FOR VIBRATION FATIGUE AT RESONANCE Fabrizio Magi (University of Bristol), Dario Di Maio (University of Bristol), Ibrahim Sever (Rolls Royce)
3215-4 SEMI-ANALYTIC SOLUTION OF NONREGULARIZED UNFOLDING STRESSES IN COMPOSITE BEAMS EMPLOYING A SERIES APPROXIMATION BASED ON LEGENDRE POLYNOMIALS Juan Manuel GonzálezThe work proposes a non Cantero (FIDAMC), Enrique local damage model and a Graciani (Universidad de numerical scheme for the Sevilla), Federico París analysis of the debonding (Universidad de Sevilla), process of quasi-brittle Bernardo López-Romano adhesives subjected to uni- (FIDAMC), Daniel MeizosoThe investigation aims at lateral contact and friction Latova (Airbus) the development of thereffects. moplastic PPS-PESU blends Semi-analytic solution of with properties comparable non-regularized unfolding to PEEK. The focus is set on stresses in composite the improvement of thermo beams employing a series mechanical properties and approximation in the chem. resistance. displacements based on Legendre polynomials and higher-order moments
3216-4 MODE I, MODE II AND FIXED RATIO MIXED I/ II FATIGUE DELAMINATION OF DIFFERENT CARBON FIBER REINFORCED COMPOSITE LAMINATES Steffen Stelzer (Montanuniversitaet Leoben), Andreas Brunner (EMPA-Swiss Federal Laboratories for Materials Science and Technology), Gerald Pinter (Montanuniversitaet Leoben)
3217-4 ENERGY DISSIPATION IN WEBFLANGE JUNCTIONS OF PULTRUDED GFRP DECKS Sonia Yanes (Ecole Polytechnique Fédérale de Lausanne (EPFL)), Julia de Castro (Ecole Polytechnique Fédérale de Lausanne (EPFL)), Thomas Keller (Ecole Polytechnique Fédérale de Lausanne (EPFL))
3218-4 HIGH TEMPERATURE BEHAVIOR OF PPSBASED COMPOSITES FOR AERONAUTICAL APPLICATIONS: INFLUENCE OF FIRE EXPOSURE ON TENSILE AND COMPRESSIVE BEHAVIORS Aurélien PETIT (Institut National des Sciences Appliquées de Rouen), Benoit VIEILLE (Institut National des Sciences Appliquées de Rouen), Alexis COPPALLE (Institut National des Sciences Appliquées de Rouen), Fabrice BARBE (Institut National des Sciences Appliquées de Rouen)
3219-4 ANISOGRID LATTICE STRUCTURE FOR AN INNOVATIVE COMPOSITE USV FUSELAGE Giovanni Totaro (CIRAItalian Aerospace Research Center), Felice De Nicola (CIRA-Italian Aerospace Research Center)
3220-4 INVESTIGATION OF FRACTURE BEHAVIOR OF CARBON FIBER REINFORCED THERMOPLASTICS BY 3-POINT BENDING IMPACT TEST Fumiaki Yano (Shimadzu Corporation), Wataru Nagatsuka (The University of Tokyo), Tsuyoshi Matsuo (The University of Tokyo)
The DCPD fabricated in air condition possibly, the best parameters were with 15 psi at 80 °C until 12 hours exposure time. However, it is good to fabricate as soon as possible. 3211-4 IMPROVING AND MODELLING THE ELECTRICAL CONDUCTIVITY OF NCFREINFORCED CFRP Johannes Rehbein (German Aerospace Center (DLR))
3212-4 GRAPHENEBASED POLYMER NANOCOMPOSITES: THE EFFECT OF FILLER ORIENTATION AND DISTRIBUTION ON THE ELECTRICAL AND MECHANICAL PROPERTIES Silver coated knitting yarn Giovanni Santagiuliana is used in NCF textiles. The (Queen Mary University z-conductivity of CFRP lam- of London), Luca Rubini inates produced from these (University of Trento), textiles is up to 100-times Olivier T. Picot (Queen higher than in laminates Mary University of London), with non-conductive yarn. Ettore Barbieri (Queen Mary University of London), Nicola M. Pugno (Queen Mary University of London), Emiliano Bilotti (Queen Mary University of London), Ton Peijs (Queen Mary University of London)
3213-4 DEVELOPMENT OF COST EFFECTIVE THERMOPLASTIC COMPOSITES FOR ADVANCED AIRFRAME STRURCTURES Tim Krooß (Institut für Verbundwerkstoffe GmbH), Martin Gurka (Institut für Verbundwerkstoffe GmbH), Viktor Dück (Institut für Verbundwerkstoffe GmbH), Ulf Breuer (Institut für Verbundwerkstoffe GmbH)
M1 3214-3 ON THE STRENGTH OF COMPOSITES WITH HETEROGENEOUS REINFORCEMENT Rostislav Rypl (Brno University of Technology), Rostislav Chudoba (RWTH Aachen University), Miroslav Vořechovský (Brno University of Technology)
programme
M8 3221-3 ACTIVE AERODYNAMIC COMPONENTS FOR AUTOMOTIVE APPLICATIONS – FRP REAR SPOILER WITH INTEGRATED SMA ACTUATION Moritz Hübler (Institute A testing methodology for for Composite Materials), This study investigates the characterizing the fatigue Sebastian Nissle (Institute The contribution describes feasibility of the compubehaviour of composite for Composite Materials), a semi-analytical probatationally efficient binary A framework for predicting components under resonant Martin Gurka (Institute bilistic multiscale model model for textile composites the non-linear response of A scaled down prototype conditions is described. A for Composite Materials), of the tensile response of in predicting the mode highly compacted triaxial Investigation on hybrid of a CFRP lattice fuselage temperature based critical Ulf Breuer (Institute for unidirectional brittle-matrix A numerical model for the I fracture toughness of braids with meso FE contin- carbon fibre reinforced section was tested under event is defined as the fail- Composite Materials) composites with heteroge- generation of the fibers z-pin reinforced composite uum unit cells is proposed. plastics materials for struc- pure bending (30 kN.m) ure criterion. neous reinforcement and its architectures is presented laminates. Nesting effects,delaminatural aircraft components by to evaluate its mechanical This contribution focuses on validation. here. Non-overlapping fibers tion,damage and plasticity incorporated flame protec- response and validate the the application potential of with complex shapes and are investigated tion layers and powdered developed FE models via the active fiber reinforced polcontrolled orientation and additives. recorded strains. ymer (FRP) structures with bending are achieved in integrated shape memory this work. alloy (SMA) elements for new aerodynamic functions.
3214-4 A NON LOCAL DAMAGE MODEL FOR ADHESIVE INTERFACES Marcelo Krajnc Alves (Universidade Federal de Santa Catarina), David Roza José (Universidade Federal de Santa Catarina)
Monotonic and cyclic mixed mode I/II delamination tests of IM7/977-2 and AS4/8552 were carried out. Fatigue results are analyzed with a modified Hartman-Schijve approach for threshold estimation.
The energy dissipation capacity resulting from progressive cracking of the web-flange junctions of a pultruded GFRP deck system was experimentally investigated through web-cantilever experiments.
An approach to the optimal design of complex double curvature anisogrid lattice structures for the cold fuselage of an unmanned space reentry vehicle (USV) being developed at CIRA.
3221-4 SHAPE MEMORY BEHAVIOURS OF CARBON FIBRE REINFORCED POLYURETHANE COMPOSITES Xinying Cheng (The University of Sydney), Lin Ye (The University of Sydney)
The mechanical properties and shape memory recovery behaviours of carbon fibre reinforced shape memory In this study, we performed polyurethanes were studied 3-point bending impact test and compared with pure of two kinds of carbon fiber polyurethanes. reinforced thermoplastic composites (CFRTP) and evaluated strain-rate and temperature-dependent characteristics.
Fire exposure influence on the high-temperature residual tensile and compressive behaviors of CFRP has been investigated. It is more detrimental to compressive properties than to tensile ones
65
Scientific programme · Wednesday 22 July Congress Hall A 12:40 3201-5 BONDED REPAIR OF COMPOSITE STRUCTURES Aris Khechen (Laval university), Marie-Laure Dano (Laval university), Augustin Gakwaya (Laval university), Chun Li (National Research Council Canada)
Auditorium 15 3202-5 DISBOND MONITORING OF COMPOSITE ADHESIVE JOINTS WITH DC RESISTANCE TECHNIQUE UTILIZING ALIGNED CARBON NANOFIBRE NETWORK Raj Ladani (Sir Lawrence Wackett Aerospace Research Centre-RMIT University), This study focuses on testing Shuying Wu (Sir Lawrence and modeling of bonded Wackett Aerospace Research scarf-stepped composite joint Centre-RMIT University), under tensile loading. Effects Adrian Mouritz (Sir Lawrence of temperature and scarf an- Wackett Aerospace Research gle on the bonded repair per- Centre-RMIT University), formance were investigated. Anthony Kinloch (Imperial College), Kamran Ghorbani (RMIT University), Chun Wang (Sir Lawrence Wackett Aerospace Research CentreRMIT University) This paper focuses on the ability of carbon nanofibre (CNF) networks for in-situ monitoring of fatigue induced disbond damage in carbon fibre adhesive bonded joints.
13:00 Lunch in the Exhibition 3302 Nano Composites 8 14:00 3301 Processing Manufacturing Technology 8
14:00 3301-1 MICROHOLE MACHINING ON PRECISION CFRP COMPONENTS USING ELECTRICAL DISCHARGING MACHINING Soo-Hyun Park (Yonsei University), Gyuho Kim (Yonsei university), Byung-Kwon Min (Yonsei University), Seok-Woo Lee (KITECH), Tae-Gon Kim (KITECH) Micro-EDM drilling of microhole with CFRP has been studied. Effects of the electrical discharging machining parameters on tool wear ratio and machining quality were investigated.
66
3302-1 STRENGTHENING BEHAVIOR OF FEW-LAYERED GRAPHENE/ALUMINUM COMPOSITES Seeun Shin (Yonsei University), Donghyun Bae (Yonsei University) Strengthening behaviour of composite containing discontinuous reinforcement is strongly related with load transfer at the reinforcement– matrix interface. Few-layer graphene (FLG) as a reinforcing agen
Auditorium 10 3203-5 SHAPE MEMORY COMPOSITE SANDWICH WITH SELF-HEALING PROPERTIES FOR MARINE APPLICATIONS Loredana Santo (University of Rome “Tor Vergata”), Fabrizio Quadrini (University of Rome “Tor Vergata”)
Meeting room 18 Meeting room 19 3206-5 NOVEL METHODS OF ASSESSING INTER-PLY PROPERTIES OF TOUGHENED PREPREGS IN APPLICATION TO THE ANALYSIS OF FIBRE PATH DEFECTS Dmitry Ivanov (University of Bristol), Julien Volatier (ECOLE A higher-order theory is used NATIONALE SUPERIEURE to tailor the full 3D stress field DE MECANIQUE ET In this study, the feasibility within laminated beams by D’AEROTECHNIQUE), Jonathan of the production of a shape using variable stiffness plies. Belnoue (University of Bristol), memory composite (SMC) An optimisation scheme is Stephen Hallett (University sandwich with self-healing This paper presents an exper- then used to minimise the of Bristol), Kevin Potter properties for marine applica- imental study on the damage chance of delaminations. (University of Bristol) tions is discussed. tolerance of stepped and ply-drop tapered skin doubler The paper discusses a new repairs when subjected to experimental technique for fatigue loading. measuring interply adhesion properties of uncured prepregs. The advantages include high resolution and a natural assessment of defect modes.
Meeting room 20 Meeting room 17 3208-5 EFFECT OF THROUGH-THE-THICKNESS STITCHING AND FIBER ARCHITECTURE ON THE INTERLAMINAR AND IMPACT FRACTURE PROPERTIES OF FLAX/EPOXY LAMINATES M. Ravandi (National University of Singapore), W. S. Teo (Singapore Institute of Manufacturing Technology), M. S. Yong (Singapore Institute of Manufacturing Technology), T. E. Tay (National University of Singapore)
3303 ONR Special Symposium on Marine Composites 3
3304 Fatigue 8
3305 Structural Analysis and Optimization 8
3306 Process Induced Effects 7
3307 Process Modelling 8
3308 Biocomposites 7
3303-1 MOISTURE DIFFUSION UNDER PRESSURE IN COMPOSITES Corentin Humeau (Ifremer), Peter Davies (Ifremer), Frédéric Jacquemin (GeM)
3304-1 FATIGUE CRACK PROPAGATION MECHANISMS OF CORE-SHELL RUBBER MODIFIED EPOXY RESINS Satoshi Matsuda (University of Hyogo), Yoshio Furukawa (Kaneka Corporation), Hajime Kishi (University of Hyogo)
3305-1 DAMAGE PREDICTION DUE TO SIMULTANEOUS MULTIPLE IMPACTS IN COMPOSITES USING PERIDYNAMICS Erdogan Madenci (University of Arizona), Atila Barut (University of Arizona), Nam Phan (Naval Air Systems Command (NAVAIR)-Patuxent River-MD 20670 )
3306-1 A STUDY OF PROCESS INDUCED VOIDS IN RESISTANCE WELDING OF THERMOPLASTIC COMPOSITES Huajie Shi (Delft University of Technology), Irene Fernandez Villegas (Delft University of Technology), Harald Bersee (Delft University of Technology)
3307-1 EFFECTS OF DISORDERED TOUGHENING PARTICLES ON UNIDIRECTIONAL FIBER REINFORCEMENT PERMEABILITY Timothy Luchini (Michigan State University), Alfred Loos (Michigan State University), Stephen Sommerlot (Michigan State University )
The study focuses on the influence of hydrostatic pressure on water uptake in composites, and reaveals an influence of the microstructure on water diffusion under pressure.
Auditorium 11 3204-4 FATIGUE TEST ON SKIN DOUBLER SPECIMENS WITH STEPPED AND PLYDROP TAPERED DOUBLERS Chao Wu (Monash University), Andrew Gunnion (2Cooperative Research Centre for Advanced Composite Structures Ltd.), Bernard Chen (Monash University), Wenyi Yan (Monash University)
Auditorium 12 3205-5 LOCAL FULL-FIELD STRESS TAILORING IN VARIABLE STIFFNESS BEAMS Rainer M J Groh (University of Bristol), Paul M Weaver (University of Bristol)
The influences of throughthe-thickness stitching on the in-plane tensile properties, delamination growth as well as impact energy absorption behavior were experimentally studied.
3308-1 LIFE CYCLE ASSESSMENT OF HIGH PERFORMANCE NANOCELLULOSEREINFORCED ADVANCED FIBRE COMPOSITES Martin Hervy (University College London), Sara Evangelisti (University College Effect of core-shell rubber London), Paola Lettieri particles on the fatigue (University College London), threshold of the epoxy Koon-Yang Lee (University composite depended on the This study demonstrates the The mechanisms of void Investigations into the effects College London) molecular weight between application of peridynamics formation in welding of woven of particles and fibers on crosslinks of the epoxy matrix. to predict damage initiation fabric reinforced thermoplas- micro-scale permeability. In the work, the environmental and progression in composite tic composites were investi- Particle and fiber volume frac- impacts of bacterial cellulose laminates subjected to simul- gated. The void fraction, void tions are varied to see their (BC)- and nanofibrillated celtaneous multiple impacts. distribution and strategies for effects on steady state, single lulose (NFC)-reinforced epoxy void reduction were studied. phase, permeability. composites were evaluated using life cycle assessment (LCA).
Meeting room 16 3210-4 A FINITE ELEMENT STUDY ON THE EFFECTS OF TOUGHNESS AND PERMANENT OUT-OF-PLANE DEFORMATION ON POSTIMPACT COMPRESSIVE STRENGTH Daniel Bull (University of Southampton), Mark Spearing (University of Southampton), Ian Sinclair (University of Southampton) Finite element models were used to study the role of the undamaged cone, extent of permanent indentation and toughness on residual compressive strength. Models included delamination growth using VCCT.
3309 Recycling of Composites and Sustainability 1
3310 Damage Tolerance of Composite Structures 3
3309-1 COMPRESSION FAILURE MODES OF CARBON FIBRE FABRIC SCRAPS EPOXY LAMINATES Carlos V. Opelt (ITA Technological Institute of Aeronautics), Christiane S. R. Souza (ITA - Technological Institute of Aeronautics), José M. F. Marlet (EMBRAER S.A.), Geraldo M. Cândido (UNIFESP - Federal University of São Paulo), Mirabel C. Rezende (UNIFESP - Federal University of São Paulo)
3310-1 EVALUATING THE STRUCTURAL PERFORMANCE OF MAGNESIUM OXIDE (MGO) BOARD FOR IMPLEMENTATION IN THE CONSTRUCTION INDUSTRY Haider Al Abadi (La Trobe University)
This paper investigates the bending capacity of Magnesium Oxide boards in composite with Fibre Reinforced Polymers component as an attempt for Uncured prepreg scraps from the development of portable the production waste were bushfire shelters. used to fabricate laminates. The compression test specimens showed shear and interlaminar failure modes, in addition to a mixed mode of failure.
Wednesday 22 July · Scientific Meeting room 5
Meeting room 6
Meeting room 7 3213-5 INTERFACIAL ADHESION AND MECHANICAL PROPERTIES OF THERMOPLASTIC ACRYLIC POLYMER MATRIX CARBON FIBER REINFORCED COMPOSITES Hajime Kishi (University of Hyogo), Nozomu Nakao (University of Hyogo), Shiho Kuwashiro (University of Hyogo), Satoshi Matsuda (University of Hyogo)
M1 M2 3214-5 HIERARCHICAL SIMULATION OF STRENGTH AND DAMAGE ACCUMULATION IN FIBREREINFORCED COMPOSITES UNDER LONGITUDINAL TENSION Marco Nicolo Coccon (Imperial College London), Soraia Pimenta (Imperial College London), Ugo Galvanetto (University of Padova)
Several functional acrylic monomers were co-polymerized with the MMA. HEAA copolymer improved the interfacial adhesion to CFs, which gave the two-fold flexural strength on the acrylic CFRTP.
We model the composite as a “bundle of sub-bundles” (grouping fibres 2-by-2 up to 7-by-7) and run MonteCarlo analyses based on fibre-strength distribution and matrix shear-lag near fibre breaks
3312 Graphene, Graphene- 3313 Matrix Materials 3 Based Composites 8
3314 Fracture and Damage - Materials Scale 2
3315 Models Homogenization – Micro to Macro 3
3311-1 SYMMETRIES AND MATERIAL CHARACTERISATION Shuguang Li (University of Nottingham)
3312-1 DIRECT OBSERVATION OF GRAPHENE OXIDE CONFORMATION AND POLYMER RADIUS OF GYRATION WITHIN NANOCOMPOSITES: A SCATTERING AND RHEOLOGICAL STUDY. Stephen Boothroyd (Durham University), David Johnson (Durham University), Mike Weir (Sheffield University), Nigel Clarke (Sheffield University), Richard Thompson (Durham University), Karl Coleman (Durham University)
3314-1 DETERMINATION OF THE THROUGHTHICKNESS STRENGTH PROPERTIES TO PREDICT THE FAILURE OF THICKWALLED COMPOSITE LUGS Marco Hoffmann (Airbus Group Innovations), Kristian Zimmermann (Airbus Group Innovations), Peter Middendorf (Universität Stuttgart)
3315-1 DISTORTIONAL DEFORMATION OF MATRIX IN OPEN-HOLE TENSION COMPOSITES: EXPERIMENTAL INVESTIGATION Don Lee (Toray Composites (America)), Kenichi Yoshioka (Toray Composites (America))
Rotations are found to have the same effect as reflections for material characterization. A 3D 4-axial braid is orthotropic, and so is a twill weave but the principal axes are not aligned with fibres.
Our paper studies composites of graphene oxide (GO) and polystyrene (PS), looking at the dispersion and The impact behaviour of stability of the GO within the composites based on a polymer during processing. thermoplastic matrix (PEN) and different reinforcing fibres (carbon, basalt and polymeric fibres) has been investigated and results have been compared.
M5
We simulate the determination of cohesive laws by a J-integral approach for materials having non-linear stress-strain behavior by the use of a DCB sandwich specimen loaded with pure bending moments.
M6 M7 3219-5 AN INTEGRATIVE ANALYSIS OF SPACE TELESCOPE COMPOSITE STRUCTURES Jae-Hung Han (KAIST), JaeSan Yoon (KAIST) Measurement method for the thermal and out-gassing deformation of the composite and data-based integrated analysis are proposed for the preliminary design phase of space telescope composite structures
M8 3221-5 DOUBLE NEGATIVE CHARACTERISTICS OF METACOMPOSITES COMPRISED OF FERROMAGNETIC MICROWIRES AND POLYMER-BASED COMPOSITES Yang Luo (University of Bristol), Faxiang Qin (National Institute for Materials Science), Fabrizio Scarpa (University of Bristol), Mihail Ipatov (Universidad del Pais Vasco), Arkady Zhukov (Universidad del Pais Vasco), Jorge Carbonell (Universitat Politècnica de Valencia), Hua-Xin Peng (Zhejiang University) Conventional metamaterials are structures and their manufacturing costs are rather high. We design and fabricate a composite metamaterial with multifunctional properties via an engineering strategy.
3311 Textile-Based Composites and Fibre Architecture 8
3313-1 POLY(ETHYLENE 2,6-NAPHTHALATE) (PEN) AS THERMOPLASTIC MATRIX FOR HIGH PERFORMANCE WOVEN COMPOSITES. Davi de Vasconcellos (Institute for PolymersComposites and Biomaterials - CNR), Luigi Sorrentino (Institute for Polymers-Composites and Biomaterials - CNR), Marco d’Auria (Institute for Polymers-Composites and Biomaterials - CNR), Salvatore Iannace (Institute for Polymers-Composites and Biomaterials - CNR), Fabrizio Sarasini (Università di Roma “La Sapienza”)
M3 M4 3216-5 THE APPLICATION OF J INTEGRAL TO MEASURE COHESIVE LAWS IN MATERIALS UNDERGOING LARGE SCALE YIELDING Bent F. Sørensen (DTU Wind Energy), Stergios Goutianos (DTU Wind Energy)
programme
3316 Nanocomposites for Structural Lightweight Modelling and Testing 2
3316-1 A MOLECULAR DYNAMICS STUDY ON THE STRAIN RATE DEPENDENCE FOR ELASTO-PLASTIC RESPONSE OF CROSSLINKED EPOXY Hyungbum Park (Seoul National University), Byungjo Kim (Seoul National University), Hyunseong Shin The present work was per- (Seoul National University), formed to demonstrate the Joonmyung Choi (Seoul A new specimen geomprocess of homogenization/ National University), etry to determine the dehomogenization between Seunghwa Yang (Dong-A through-thickness tensile micro- and macro-scale University), Manyoung strength of composites is models and to employ the Lee (Agency for Defense presented. The determined Onset Theory in the assess- Development), Euigyung strength is validated by DCB ment of OHT tests. Jeong (Agency for Defense and unfolding tests in comDevelopment), Maenghyo bination with FEA. Cho (Seoul National University)
3317 Ductile and Pseudo- 3318 Fire Resistance 3 ductile Composites 4
3319 Applications - Civil Engineering 1
3320 New Structural Testing Methods 3
3317-1 PSEUDO-DUCTILE CARBON/EPOXY HYBRID COMPOSITES Gergely Czel (Budapest University of Technology and Economics), Meisam Jalalvand (University of Bristol), Michael Wisnom (University of Bristol)
3319-1 MODELLING OF STEEL-FRP SINGLE-LAP JOINTS UNDER FREEZETHAW CYCLING Ankit Agarwal (University of New South Wales), Ehab Hamed (University of New South Wales), Stephen J Foster (University of New South Wales)
3320-1 MECHANICAL TESTING OF ADHESIVELY JOINED SANDWICH STRUCTURES Malte Mund (Technische Universität Braunschweig), Michael Griese (Technische Universität Braunschweig ), Fabian Fischer (Technische Universität Braunschweig), Klaus Dilger (Technische Universität Braunschweig)
3318-1 POLYFURFURYL ALCOHOL THERMOSETS RESINS IN FIRE RESISTANT COMPOSITE APPLICATIONS Pietro Di Modica (Newcastle University), Geoff Gibson (Newcastle University), Geroge Kotsikos (Newcastle University), Hans Hoydonckx (TransFurans Chemicals UD interlayer hybrids made bvba), Marco Monti of different grades of carbon (Proplast), Ivan Sanchez fibres were studied. The (Gaiker), Jens Bachmann best configuration showed (DLR) pseudo-ductile failure and 1% strain margin between The presentation will feathe first fracture and final ture results coming from failure. FIRERESIST project where Polyfuryl alcohol resins were investigated for there use in fire proof composite applications.
Impact of freeze-thaw cycles on steel-FRP lap-joints is examined numerically, and it has been found that the interfacial stresses in the adhesive layer increase with increase in the number of cycles.
3321 Multifunctional Composites - Adaptive Response and Reconfiguration 2 3321-1 MODELING OF LOW-FREQUENCY BROAD-BAND VIBRATION MITIGATION USING ZIGZAG INSERTS AND AN E-DAMPING CONCEPT. Katherine Reichl (University of Michigan), Daniel Inman (University of Michigan)
This research examines a multifunctional composite metastructure designed to Test methods for adhesively provide broadband vibration joined sandwich structures suppression without inare presented and evaluated creasing the overall weight concerning their ability to of the structure. determine the strength of the joint and the influences of joining parameters.
Deformation mechanisms of epoxy polymer was investigated using well-defined molecular dynamics simulations, considering crosslink density and strain rates dependency.
67
Scientific programme · Wednesday 22 July Congress Hall A 14:20 3301-2 ALUMINUM/ CUBIC BORON NITRIDE FUNCTIONALLY GRADED GRINDING WHEEL FOR DRILLING CFRP FABRICATED BY THE CENTRIFUGAL MIXED-POWDER METHOD Yoshimi Watanabe (Nagoya Institute of Technology), Yuta Suzuki (Nagoya Institute of Technology), Hisashi Sato (Nagoya Institute of Technology)
Auditorium 15 3302-2 MECHANICAL PROPERTIES OF CARBON NANOMATERIALS BASED MACROSCOPIC ARCHITECTURES Luqi Liu (National Center for Nanoscience and Technology-CHINA), Zhaohe Dai (National Center for Nanoscience and TechnologyCHINA), Jun Kuang (National Center for Nanoscience and Technology-CHINA), Zhong Zhang (National Center for Nanoscience and TechnologyCHINA)
Auditorium 10 3303-2 EFFECTS OF HUMIDITY ON THE FRACTURE BEHAVIOR OF POLYMERIC MATRIX MATERIAL UNDER DYNAMIC LOADING Orlando Delpino Gonzales (University of Southern California), Veronica Eliasson (University of Southern California)
The effects of water sorption on the dynamic fracture of Al matrix cubic boron nitride notched polymeric matrix (cBN) particles dispersed materials were examined. functionally graded grinding The materials used were vinyl wheels for the gyro-driving To utilize individual carbon ester resin and poly-methyl grinding wheel system have nanomaterials excellent prop- methacrylate (PMMA). been fabricated by the centrif- erties at macroscopic level, ugal mixed-powder method. graphene based paper and CNT based sponge are fabricated, and their mechanical properties are investigated. 3302-3 IMPROVEMENT OF 3303-3 INFLUENCE OF 14:40 3301-3 BEHAVIOUR OF THERMOPLASTIC INTERLAMINAR FRACTURE WATER ABSORPTION ON COMPOSITES WITH HOLES TOUGHNESS IN CARBON LONG-TERM STRENGTHS IN MACHINED USING A FIBRE/EPOXY COMPOSITES VARIOUS DIRECTIONS OF THERMALLY-ASSISTED WITH CARBON NANOTUBES/ UNIDIRECTIONAL CFRP FOR PIERCING PROCESS POLYSULFONE (CNTS/PSF) MARINE USE Nicholas Brown (TWI Ltd.), INTERLEAVES Yasushi Miyano (Kanazawa Chris Worrall (TWI Ltd.), Steve Nan Zheng (The University Institute of Technology), Ogin (University of Surrey), of Sydney), Jiefeng Gao Masayuki Nakada (Kanazawa Paul Smith (University of (The University of Sydney), Institute of Technology) Surrey) Hong-Yuan Liu (The University of Sydney), Yudong The influence of water Results are discussed that Huang (Harbin Institute of absorption on the long-term show the possible strength Technology), Yiu-Wing Mai strengths in various directions improvement of CF/PEEK (The University of Sydney) of unidirectional CFRP for specimens with holes marine use which consists of machined using a Thermally- A vacuum filtration method vinylester resin as a matrix Assisted Piercing process as was used to fabricate carbon was cleared. opposed to a drilling process. nanotube/polysulfone (CNT/ PSF) paper as an interleaf to improve the interlaminar fracture toughness of CF/EP composite laminates.
68
Auditorium 11 3304-2 SIMULATION METHODS FOR HIGHCYCLE FATIGUE-DRIVEN DELAMINATION USING COHESIVE ZONE MODELS – FUNDAMENTAL BEHAVIOR AND BENCHMARK STUDIES Brian Bak (Aalborg University), Esben Lindgaard (Aalborg University), Erik Lund (Aalborg University) A novel CZM based method for simulating fatigue-driven delamination under cyclic loading and new benchmark studies with four other comparable methods are presented.
3304-3 MODELLING FATIGUE CRACK INITIATION IN COMPOSITE LAMINATES IN THE PRESENCE OF MICROSIZED VOIDS Lucio Maragoni (University of Padova), Paolo Andrea Carraro (University of Padova), Marino Quaresimin (University of Padova)
Auditorium 12 3305-2 DESIGN OF A CARBON FIBER REINFORCED PLASTIC SHAFT FOR A HIGH SPEED FLYWHEEL ROTOR Stefan Hartl (Vienna University of Technology), Alexander Schulz (Vienna University of Technology), Manfred Kaltenbacher (Vienna University of Technology) A new flywheel rotor design containing a CFRP hollow shaft with a hoop wound inertia mass is optimized using FE method, manufactured and validated using a laser scanning vibrometer.
3305-3 POSTBUCKLING OF PRE-PRESSURE–LOADED COMPOSITE LAMINATED CYLINDRICAL PANELS RESTING ON ELASTIC FOUNDATIONS SUBJECTED TO AXIAL COMPRESSION IN THERMAL ENVIRONMENTS Hai Wang (Shanghai Jiao Tong University), Hui-Shen Shen (Shanghai Jiao Tong University)
Meeting room 18 3306-2 SIMULATION AND VERIFICATION OF CUREINDUCED DEFORMATION FOR INTEGRATED COMPOSITE STRUCTURES Kai Liu (Beihang University), Jinrui Ye (Beihang University), Boming Zhang (Beihang University), Lijie Jia (Shanghai Aircraft Manufacuring Co) A multi-level simulation method for cure process of composite integrated structure was developed to simplify calculation and improve accuracy of prediction.
3306-3 CHARACTERIZING, MODELING, AND VALIDATING THE PROCESSING OF OUTOF-AUTOCLAVE ORGANIC MATRIX COMPOSITES AS A FUNCTION OF CURE CYCLE Tara Storage (Materials and Manufacturing Directorate), Brent L. Volk (Materials and Manufacturing Directorate), C.w. Lee (University of Dayton The influence of micro-sized Research Institute), Ray voids on crack initiation and Coomer (University of Dayton evolution under fatigue is A postbuckling analysis is Research Institute), Robert studied, and a model based presented for shear-deforma- Brockman (University of on a RVE is proposed to pre- ble laminated cylindrical pan- Dayton Research Institute) dict crack initiation in absence els resting on elastic foundaand presence of voids. tions subjected to combined Experimental (angle bracket uniform lateral pressure and spring-in) and computacompressive edge loads. tional (mechanical, unit cell composite, and constituent property model) efforts toward predicting the processing of OMCs are presented.
Meeting room 19 3307-2 MEASUREMENT AND NUMERICAL ANALYSIS OF THROUGH-THICKNESS RESIN FLOW AND HEAT TRANSFER DURING OOA PROCESSING OF THICK-SECTION WIND OR TIDAL TURBINE BLADES James Maguire (University College Cork), Conchúr Ó Brádaigh (University College Cork) Resin characterisation of powder-epoxy for the numerical modelling of through-thickness resin flow during OOA processing of thick-section wind or tidal turbine blades.
3307-3 A COSSERAT CONTINUUM MODEL FOR PREDICTING THE ONSET OF WRINKLES DURING THE PROCESSING OF COMPOSITE LAMINATES Richard Butler (University of Bath), Tim Dodwell (University of Bath), Samuel Erland (University of Bath) A Cosserat continuum for uncured composite laminates is presented, demonstrating application to layer-wise mechanics on the macroscale. Effective modelling of wrinkle defects is highlighted.
Meeting room 20 3308-2 IMPROVING THE MECHANICAL PROPERTIES OF WOOD-PLASTICS COMPOSITES BY PARTICLE SURFACE TREATMENT IN SOLUTION Ambre Verdaguer (Université Laval), Denis Rodrigue (Université Laval)
Meeting room 17 3309-2 FUTURE DIRECTIONS IN THE RECYCLING OF COMPOSITE MATERIALS Geraldine Oliveux (University of Birmingham), Luke Dandy (University of Birmingham), Gary Leeke (University of Birmingham), Jean-Luc Bailleul (Laboratoire de Thermocinetique de Nantes)
Wood-plastic composites were prepared by dry-blending of linear medium density polyethylene and maple wood flour with and without a surface treatment. The samples were produced by compression molding.
Different technologies based on solvolysis were applied to degrade epoxy resins. The carbon fibres recovered after the most efficient solvolysis treatment were then reused in a new material.
3308-3 ENVIRONMENTAL RESISTANCE OF FLAX/ BIO-BASED EPOXY AND FLAX/POLYURETHANE COMPOSITES MANUFACTURED BY RESIN TRANSFER MOULDING Nils Cuinat-Guerraz (McGill Univeristy), Pascal Hubert (McGill Univeristy), MarieJosée Dumont (McGill Univeristy)
3309-3 STUDY ON RECYCLING OF CARBON FIBRE THERMOPLASTIC PREPREG WASTE Kawashima Masaya (Doshisha University), Tanaka Tatsuya (Doshisha University ), Arao Yoshihiko (Doshisha University ), Okuyama kento (Doshisha University), Ishikawa Takeshi (MITSUBISHI RAYON), Tomioka Masao (MITSUBISHI RAYON)
This study compares the evolution of the physical properties two biocomposites aged at 90%RH and 30°C: (1) a flax/bio-based epoxy and (2) a flax/polyurethane.
We propose the recycling method of prepreg wastes and characterize the recycled material. Furthermore, the recycled material were investigated the potency.
Meeting room 16 3310-2 INFLUENCE OF STRUCTURAL STITCHING ON COMPOSITE T-JOINT STRENGTH Michael Magin (Institute for Composite Materials), Nicole Motsch (Institute for Composite Materials) Structural stitching of CFRPT-joints containing glass fiber gusset fillers showed improvements of the failure resistance of this design commonly used in aerospace design.
3310-3 3D FLOATING NODE METHOD FOR MODELLING PROGRESSIVE DAMAGE Bo-Yang Chen (National University of Singapore), TongEarn Tay (National University of Singapore), Silvestre Pinho (Imperial College London), Nelson Carvalho (National Institute of Aerospace), Pedro Baiz (Imperial College London), Vincent Tan (National University of Singapore) This paper develops a 3D Floating Node Method to model explicitly the matrix crack, delamination and their intersection, such that the matrix crack/delamination interaction can be captured accurately.
Wednesday 22 July · Scientific Meeting room 5 3311-2 CUTTING STRATEGIES OF LONG FIBER PATCH PREFORMS FOR STRUCTURES WITH COMPLEX FIBER ARCHITECTURE Bernhard Horn (Technische Universität München), Christoph Ebel (Technische Universität München), Klaus Drechsler (Technische Universität München) Load path optimized layup design using fiber patches requires special patch shapes to avoid gaps and overlaps. A study on the influence of different patch geometries on mechanical properties is shown.
3311-3 INFLUENCE OF TEST RIG CONFIGURATION AND EVALUATION ALGORITHMS ON OPTICAL 2D PERMEABILITY MEASUREMENT: A BENCHMARK EXERCISE David Christian Berg (Clausthal University of Technology), Ewald Fauster (Montanuniversität Leoben), Harald Grössing (Montanuniversität Leoben), Dieter Meiners (Clausthal University of Technology), Ralf Schledjewski (Montanuniversität Leoben), Gerhard Ziegmann (Clausthal University of Technology) This study investigates the influence of experimental setup as well as evaluation algorithms on radial-flow permeability experiments by benchmarking the tests rigs of the involved institutions.
Meeting room 6 3312-2 FRACTURE MECHANICS SIMULATIONS OF GRAPHENE COMPOSITES USING A 3D MESHFREE HIERARCHICAL MODEL Lucas Brely (università di torino), Federico Bosia (università di torino), Nicola pugno (University of Trento)
M1 3314-2 AN INVESTIGATION OF IN-PLANE PERFORMANCE OF ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENE FIBRE COMPOSITES Mark Hazzard (University of Bristol), Paul Curtis (University of Bristol), Lorenzo Iannucci (Imperial College London), Stephen Here, we develop a multiHallett (University of Bristol), scale numerical model to Richard Trask (University simulate the mechanisms Preparation method of micro of Bristol) involved in damage progres- scale epoxy fiber specimen sion and energy dissipation for tensile test was develIn-plane mechanical properat different size scales in oped to evaluate matrix res- ties of Ultra-High Molecular hierarchical graphene nano- in mechanical properties at Weight Polyethylene fibre composites. length scales representative Dyneema® composites, of matrix resin in CFRP. typically used for impact applications, were investigated at low strain rates.
M2 3315-2 CHARACTERISATION OF MICRO-SCALE MECHANICAL BEHAVIOUR OF COMPOSITES USING STOCHASTIC BOUNDARY VALUE PROBLEM SOLUTIONS Mikhail Tashkinov (Perm National Research Polytechnic University), Natalia Mikhailova (Perm National Research Polytechnic University)
3312-3 INVESTIGATION OF THE EFFECT OF MULTI-WALLED CARBON NANOTUBES AND GRAPHENE NANO-PLATELETS ON INTERLAMINAR FRACTURE TOUGHNESS OF CFRP Christina Kostagiannakopoulou (University of Patras), Xenia Tsilimigkra (University of Patras), George Sotiriadis (University of Patras), Vassilis Kostopoulos (University of Patras)
3315-3 DETERMINATION OF STRAIN AMPLIFICATION FACTORS FOR SIFT THEORY BASED ON RVE MODELS CONSIDERING PERIODICAL BOUNDARY CONDITIONS Jian Zhao (Shanghai Jiaotong University), Hai Wang (Shanghai Jiaotong University), Xinying Lv (Shanghai Jiaotong University), Xiuhua Chen (Shanghai Jiaotong University)
The aim of this article is to investigate the toughening mechanisms of MWCNTs and GNPs in CFRP laminates. Mode I & mode II tests were performed in order to study the fracture behavior of composites.
Meeting room 7 3313-2 THE ROLE OF MATRIX RESIN MICROSCALE PROPERTIES ON THE AXIAL TENSILE STRENGTH OF CFRP Jun Misumi (Toray Industries Inc.), Raja Ganesh (University of Delaware), Subramani Sockalingam (University of Delaware), John W. Gillespie, Jr. (University of Delaware)
3313-3 FRACTURE BEHAVIOR OF ACRYLIC THERMOPLASTIC POLYMER / CARBON FIBER COMPOSITES IN RELATION TO MATRIX TOUGHNESS Tommaso Pini (Politecnico di Milano), Francesco BriaticoVangosa (Politecnico di Milano), Roberto Frassine (Politecnico di Milano), Marta Rink (Politecnico di Milano)
3314-3 INVESTIGATION ABOUT TEMPERATURE DEPENDENCE OF UNIDIRECTIONAL COMPRESSIVE STRENGTH OF CARBON FIBER REINFORCED THERMOPLASTIC COMPOSITES Tsuyoshi Matsuo (The University of Tokyo), Kazuro Kageyama (The University of Tokyo)
M3 3316-2 NANO-SCALE REINFORCEMENT FOR HIERARCHICAL AEROSPACE COMPOSITE LAMINATES Richard Li (Massachusetts Institute of Technology), Mark Payne (Massachusetts Institute of Technology), Brian Wardle (Massachusetts Institute of Technology)
Carbon nanotubes were radially grown on carbon This work offers a mathefibers without degrading matical model that combine in-plane strengths, thus several approaches of the enabling hierarchical comstochastic mechanics to posites with the potential for create an analytical tool for improved inter- and intralaassessment of micro-scale minar properties. stress and strain in multiphase composites
3316-3 MECHANICAL PROPERTIES OF GRAPHENE NANOPLATELET/CARBON FIBER/EPOXY HYBRID COMPOSITES: MULTISCALE MODELING AND EXPERIMENTS Cameron Hadden (Michigan Technological University), Danielle Klimek-McDonald (Michigan Technological University), Julia King (Michigan Technological Interlaminar fracture A novel test method and University), Alex toughness of an acrylic kink band failure model for Reichanadter (Michigan thermoplastic resin / carbon compressive strength of Efforts are taken to improve Technological University), fibre composite produced by unidirectional thermoplastic the precision of strain Ibrahim Miskioglu (Michigan infusion molding in relation CFRP were proposed and amplification factors and Technological University), to matrix toughness and verified its temperature thermal strain vectors for Gregory Odegard (Michigan viscoelastic behaviour dependence influenced by SIFT by introducing period- Technological University) shear property. ical boundary conditions to RVE models An experimentally validated multiscale modeling strategy (molecular dynamics and micromechanics) is used to predict the bulk behavior of graphene nanoplatelet/carbon fiber/epoxy composites.
M4 3317-2 PSEUDODUCTILITY IN MULTIDIRECTIONAL HYBRID LAMINATES Meisam Jalalvand (University of Bristol), Gergely Czel (University of Bristol), Michael R. Wisnom (University of Bristol) The tensile behaviour of multi-directional hybrid laminates made with UD hybrid sub-laminates is studied. The final goal is to introduce pseudo-ductility to layups with wider industrial applications.
3317-3 THE EFFECT OF FIBER CUTS ON THE TENSILE BEHAVIOR OF HYBRID CARBON FIBER/ SELF-REINFORCED POLYPROPYLENE COMPOSITES Yannick Meerten (KU Leuven), Yentl Swolfs (KU Leuven), Mengdie Yang (KU Leuven), Jan Ivens (KU Leuven), Larissa Gorbatikh (KU Leuven) Partial fibre cuts were introduced into the carbon fibre layers of carbon fibre/ self-reinforced polypropylene hybrids. Their effect on the tensile behaviour was analysed.
programme
M5 3318-2 BIO-RESIN FOR NEW BIO-COMPOSITE PASSIVE FIRE PROTECTION FOR OFF-SHORE APPLICATION Pietro Di Modica (Newcastle University), Geoff Gibson (Newcastle University), George Kotsikos (Newcastle University), Hans Hoydonckx (TransFurans Chemicals bvba (TFC))
M6 3319-2 PLASTIC HINGE RELOCATION OF DAMAGED PRECAST RC COLUMNS USING CFRP SHELLS Dylan Brown (University of Utah), Joel Parks (Univresity of Utah), Mohammad Ameli (University of Utah), Chris Pantelides (University of Utah)
M7 3320-2 COMPRESSION AFTER IMPACT TEST METHOD FOR THIN LAMINATES Marina Remacha (FIDAMC), Sonia Sánchez-Sáez (Carlos III University of Madrid), Enrique Barbero (Carlos III University of Madrid), Bernardo López (FIDAMC)
M8 3321-2 3D PRINTING OF METASTRUCTURES FOR PASSIVE BROADBAND VIBRATION SUPPRESSION Jared D. Hobeck (University of Michigan), Charles M. V. Laurent (Catholic Institute of Arts and Crafts), Daniel J. Inman (University of Michigan)
A repair technique has been developed to relocate the A small propane burner was column plastic hinge of used to compare fire protec- severely damaged precast tion performance of a new reinforced concrete bridge furan resin against a phecolumns, using a combinanolic composite and simple tion of a CFRP shell, epoxy Kaowool. The bio composite anchored headed st performed as good as the phenolic one.
Application thickness range of a developed CAI (Compression After Impact) device to test thin composite laminates was analysed. Intact and undamaged specimens were tested and simulated.
This research presents experimentally validated analytical and finite element models focused on suppressing axial vibration of a 3D-printed metastructure rod with 10 internal resonators.
3318-3 MODELLING THE THERMOMECHANICAL BEHAVIOR OF AERONAUTICAL COMPOSITE MATERIALS EXPOSED TO FIRE. Denis BERTHEAU (Pprime Institute), Eric LAINE (Pprime Institute), Damien MARCHAND (Pprime Institute), Rocio DE VICENTE SUGUE (University of Sevilla)
3319-3 SHEAR AND BUCKLING STRENGTHENING OF STEEL BRIDGE GIRDERS USING SMALL DIAMETER CFRP STRANDS Hamid Kazem (Construction and Environmental Engineering), Lucas Guaderrama (Construction and Environmental Engineering), Sami Rizkalla (Construction and Environmental Engineering), Akira Kobayashi (Nippon Steel & Sumikin Material Co.)
3320-3 BUCKLING TEST OF A THIN-WALLED SLENDER COMPOSITE SLIT TUBE Gregory Sanford (LoadPath), Jeremy Banik (AFRL)
Composite structures are subjected simultaneously to flame (75 to 200kW/ m²) and mechanical stress (bending). The correlation results testing / numerical simulations with Abaqus® will be presented.
This paper presents the results of a comprehensive research programme undertaken to investigate the use of small-diameter CFRP strands for strengthening steel structures and bridges. The proposed CFRP s
3321-3 PORO-VASCULAR COMPOSITES WITH SURFACE ROUGHNESS CONTROL James Thomas (US Naval Research Laboratory), Testing and evaluation of Marriner Merrill (US Naval Storable Tubular Extendible Research Laboratory), Members (STEMs) made Raymond Auyeung (US from thin composite lamiNaval Research Laboratory), nates. The research focuses Alberto Pique (US Naval on STEMs to be used in Research Laboratory) numerous spacecraft applications. Report on current Naval Research Laboratory R&D of multifunctional “poro-vascular composites” (PVCs) with the capability for both structure and active-addressable surface roughness control.
69
Scientific programme · Wednesday 22 July Congress Hall A 15:00 3301-4 DELAMINATION ANALYSIS OF LAMINATED COMPOSITES IN DRILLING AND QUASI-STATIC PENETRATION Navid Zarif Karimi (University of Bologna), Parnian Kianfar (University of Bologna), Giangiacomo Minak (University of Bologna) In this paper, the effect of machining parameters, feed rate and cutting speed, on delamination in drilling process and quasi-static penetration were investigated.
Auditorium 15 3302-4 ULTRASONICATION AND MECHANICAL PROPERTIES OF NANOCLAY/ POLY(ETHYLENE TEREPHTHALATE) COMPOSITES Kazuaki Sanada (Toyama Prefectural University), Makoto Kawagoe (Toyama Prefectural University), Wataru Mizuno (Toyama Industrial Technology Center)
Auditorium 10 3303-4 DAMAGE EVOLUTION IN CARBON FIBER VINYL ESTER MARINE COMPOSITES AND SEA WATER EFFECTS Akawut Siriruk (University of Tennessee), Dayakar Penumadu (University of Tennessee), Kenneth Thomas (University of Tennessee)
This paper presents a fundamental study on the damage Mechanical properties of evolution of composite nanoclay/poly(ethylene tere- materials being considered phthalate) (PET) composites by US Navy made of T700 produced via ultrasonication based carbon fiber fabric and and melt processing have vinyl ester resin using VARTM been investigated experimen- process. tally and analytically.
Auditorium 11 3304-4 MULTI-SCALE MODELING OF THE FATIGUE BEHAVIOR OF SHORT GLASS FIBER REINFORCED POLYAMIDE NOTCHED SPECIMENS Enrico Belmonte (University of Padova ), Matthias De Monte (Robert Bosch GmbH), Marino Quaresimin (University of Padova) This paper presents a multi-scale strategy for the lifetime prediction, in terms of crack initiation, of short fiber reinforced polyamide notched specimens.
Auditorium 12 3305-4 OPTIMAL DESIGN OF POLYMERIC LAMINATES FOR MAXIMUM ENERGY DISSIPATION UNDER LOWVELOCITY IMPACT Romesh Batra (Virginia Polytechnic Institute and State University), G. O. Antoine (Virginia Polytechnic Institute and State University)
Meeting room 18 3306-4 STRUCTURAL ANALYSIS OF COMPOSITE BULKHEAD CONSIDERING VARIABILITY DUE TO VARTM PROCESS Atsushi Kondo (Tokyo Metropolitan University), Yutaka Iwahori (JAXA), Hirotaka Igawa (JAXA), Naoyuki Watanabe (Tokyo Metropolitan University)
Meeting room 19 3307-4 DEVELOPMENT OF SIMULATION MODEL FOR REPRODUCIBLE 3D MULTILAYERED WOVEN FABRICS SUITABLE IN LIGHTWEIGHT ENGINEERING Knut Großmann (TU DresdenIWM), Michael Löser (TU Dresden-IWM), Chokri Cherif (TU Dresden-ITM), Gerald Hoffmann (TU Dresden-ITM), Adil Mountasir (TU DresdenITM)
Meeting room 20 3308-4 ULTRASTRUCTURAL AND MECHANICAL ANALYSIS OF THE STOMATOPOD DACTYL CLUB EXOCUTICLE Nicholas Yaraghi (University of California-Riverside), Lessa Grunenfelder (University of Southern California), Nobphadon Suksangpanya (Purdue University), Steven Herrera (University of California-Riverside), A bulkhead for aircraft Christopher Salinas (University structure was fabricated with of California-Riverside), VaRTM process and effect of A simulation model of weav- Garrett Milliron (Max Planck the manufacturing process on ing spacer preforms for com- Institute for Colloids and structural characteristics were posites is used to optimize Interfaces), Isaias Gallana experimentally and numerimachine parameters with the (Purdue University), Kenneth cally investigated. aim to limit maximum forces Evans-Lutterodt (Brookhaven acting on reinforcing fibres National Lab), Elaine DiMasi during the weaving process. (Brookhaven National Lab), Steven Nutt (University of Southern California), Pablo Zavattieri (Purdue University), David Kisailus (University of California-Riverside) We investigate the multi-scale structural and compositional features as well as the mechanical properties of an impact-resistant biological composite material
15:20 Coffee in the Exhibition
70
Meeting room 17 3309-4 RECYCLING OF WOVEN CARBON FIBER PATCHES FROM LAMINATED CFRP BY MEANS OF INDUCTION HEATING Anna Schneller (University of Augsburg), Wolfgang M. Mueller (University of Augsburg), Simone Richler (University of Augsburg), Siegfried Horn (University of Augsburg) Selective heating of CFs in a laminated CFRP by induction heating to affect the fiber matrix interface and recycle well-defined patches of CF fabric while preserving the mechanical properties.
Meeting room 16 3310-4 DAMAGE ESTIMATION IN NONLINEAR LAMINATES SUBJECTED TO A TRANSVERSE CONCENTRATED LOAD Hiroshi Suemasu (Sophia University), Michael Wisnom (University of Bristol), Stephen Hallett (University of Bristol), Xiao Sun (University of Bristol) An analytical study on damage growth of nonlinear laminated plates subjected to a transverse concentrated load is conducted to give an expression for a rough estimate of the damage.
Wednesday 22 July · Scientific Meeting room 5 3311-4 MECHANICAL PROPERTIES OF FRP WITH BRAIDED COMPOSITES LATERAL COMPRESSIONAL BEHAVIORS OF GROUND TUBE Takeshi Saito (Kyoto Institute of Technology), AKIO OHTANI (Gifu University ), Asami Nakai (Gifu University) This study deals with the braided composite tube and its properties . The influence of lateral compression on load and stress caused by grinding was clarified .
Meeting room 6 3312-4 AROMATIC POLYAMIDE/GRAPHENE NANOCOMPOSITES : EFFECT OF THE EXPANDED GRAPHITE SURFACE TREATMENT ON THE MATERIALS PROPERTIES Jean-Marie Raquez (University of Mons), Alexis Bobenrieth (University of Mons), Philippe Dubois (University of Mons)
Meeting room 7 3313-4 MODELLING CHARACTERISATION OF A FAST CURING SILICA NANOPARTICLE MODIFIED EPOXY Andre Keller (FHNW University of Applied Sciences and Arts Northwestern Switzerland), Kunal Masania (FHNW University of Applied Sciences and Arts Northwestern Switzerland), Ambrose Taylor (Imperial College London), Clemens Dransfeld (FHNW University of Applied Sciences and Arts Northwestern Switzerland) The rheology and kinetics of a fast-curing epoxy were modelled. The temperature overshoot due to exotherm and variation in the Tg over the thickness were predicted and validated with experiments
M1 3314-4 CHARACTERISATION OF FAILURE PROCESSES OF COMPOSITE PLIES UNDER TRANSVERSE LOADING Christian Marotzke (BAM), Titus Feldmann (BAM)
M2 3315-4 MEAN FIELD HOMOGENIZATION OF DISCONTINUOUS LONG FIBER REINFORCED POLYMERS AND PARAMETER IDENTIFICATION OF BIAXIAL TENSILE TESTS The dependence of the fail- THROUGH INVERSE ure mode on the specimen MODELING length and the off axis angle Malte Schemmann (KIT), taking place in standard off Barthel Brylka (KIT), axis tests is studied experi- Loredana Kehrer (KIT), mentally as well as by finite Viktor Müller (KIT), Thomas element analyses. Böhlke (KIT)
M3 3316-4 3D TRANSMISSION ELECTRON MICROSCOPY TO QUANTIFY MORPHOLOGY OF ALIGNED NANOFIBER NANOCOMPOSITES Brian L. Wardle (Massachusetts Institute of Technology), Bharath Natarajan (National Institute of Standards and Technology), Noa Lachman (Massachusetts Institute of Technology), Thomas Lam (National Institute of Standards and Technology), Biaxial tensile test of disDouglas Jacobs continous fiber reinforced (Massachusetts Institute polymers, inverse parameter of Technology), Christian identification with a Gauss- Long (National Institute of Newton procedure, comStandards and Technology), parison with homogenized Minhua Zhao (National material parameters based Institute of Standards and on CT analysis Technology), Renu Sharma (National Institute of Standards and Technology), J. Alexander Liddle (National Institute of Standards and Technology)
M4 3317-4 ALIGNED UNIDIRECTIONAL PLA/ BACTERIAL CELLULOSE NANOCOMPOSITE FIBRE REINFORCED PDLLA COMPOSITES VIA MELT AND SOLUTION BLOW SPINNING Jonny Blaker (University of Manchseter), Koon-Yang Lee (University College London), Alexander Bismarck (University of Vienna)
M5 3318-4 USE OF EXPANDABLE MULTILAYER METAL LAMINATES AS FIRE PROTECTION FOR ALUMINIUM AND CFRP AEROSPACE STRUCTURES Geoff Gibson (Newcastle University), Sandra Christke (Newcastle University), Sheila Wan-Jusoh (Newcastle University), George Kotsikos (Newcastle University), Adrian Mouritz (RMIT University)
M6 3319-4 FIRE EXPERIMENTS OF THIN-WALLED CFRP PRETENSIONED HIGH STRENGTH CONCRETE SLABS UNDER SERVICE LOAD Giovanni Pietro Terrasi (Empa), Jing Gao (Xiamen University), Cristiàn Maluk (University of Edinburgh), Luke Bisby (University of Edinburgh)
Sustainable precast concrete elements are emergExperimental study about a ing utilizing high-perfornovel method of expandable mance, self-consolidating, polymer-metal laminates fibre-reinforced concrete for effective fire protection (HPSCC) reinforced with of temperature-sensitive high-strength, lightweight, and mechanically loaded and non-corroding prest aerospace structures
programme
M7 3320-4 QUASI-STATIC ROLLER AND BALL TEST FOR COMPOSITE PLATES Ivonne Bartsch (German Aerspace Center (DLR)) An indention test for two different test bodies (roller and ball) based on the IATA ULD Regulations has been derived. These tests are neceassary to find new materials fir Unit Load Devices.
M8 3321-4 BIO-INSPIRED REVERSIBLE CROSSLINKING, USING CHELATING POLYMERS AND METAL ION BINDING, FOR USE AS SOFT ACTUATION AND SELECTIVE GROWTH Anna Baker (University of Bristol), Duncan Wass (University of Bristol), Richard Trask (University of Bristol) Ionoprinting has been used to create 3D polygons and origami shapes from flat homogeneous hydrogels; morphing trianglar based pyramid, a cube, an octahedron and an “umbrella” have all been created.
We present three-dimensional transmission electron microscopy quantification of the nanoscale morphology of polymer nanocomposites containing up to 20% volume fraction of aligned carbon nanotubes.
71
Scientific programme · Wednesday 22 July Congress Hall A Auditorium 15 3402 Nano Composites 9 15:40 3401 Processing Manufacturing Technology 9 15:40 3401-1 ANALYSIS OF PROCESSING CONDITIONS FOR A NOVEL 3D-COMPOSITE PRODUCTION TECHNIQUE Martin Eichenhofer (ETH Zürich), Jesus Maldonado (ETH Zürich), Florian Klunker (ETH Zürich), Paolo Ermanni (ETH Zürich)
3402-1 PREPARATION AND PROPERTIES OF MOS2 NANOSHEETS AND MOS2 NANOSHEETS/EPOXY COMPOSITES Rongguo Wang (Harbin Institute of Technology), Yafei He (Harbin Institute of Technology), Chengqin Dai (Harbin Institute of Technology), Ning A novel manufacturing proDing (Harbin Institute cess for a continuous fiber of Technology), Lifeng lattice fabrication (CFLF), Hao (Harbin Institute of inspired by 3D-printing, pro- Technology), Qi Wang (Harbin vides continuously extruded Institute of Technology), free form structures of rein- Ping Peng (Harbin Institute forced thermoplastic material. of Technology), Xiaolong Lu (Harbin Institute of Technology), Wenbo Liu (Harbin Institute of Technology), Weicheng Jiao (Harbin Institute of Technology), Fan Yang (Harbin Institute of Technology)
Prepare MoS2 nanosheets suspension and MoS2 nanosheets reinforced epoxy composites and study the absorbance, photoluminescence, morphology, annealing property and tensile property of them. 3402-2 EPOXY 16:00 3401-2 ADDITIVE MANUFACTURING OF HIGH NANOCOMPOSITES WITH TEMPERATURE GLASS AND TWO-DIMENSIONAL CARBON REINFORCED PEEK TUNGSTEN DISULFIDE COMPOSITES ADDITIVES Yuan Wang (University of Yukun Wang (Beihang Exeter), Oana Ghita (University University), Yan Zhao (Beihang of Exeter), Richard Davies University), Xiao Han (Beihang (University of Exeter) University), Muchun Liu (Beihang University) This study presents recent developments in high temIn this study, we chose the perature laser sintering of tungsten disulfide with nanocomposites with focus on sheet structure as a reinforceglass filled PEK (PEK/GB) and ment for the resin matrix. The graphite platelet filled PEEK results showed that tungsten (PEEK/GP) materials. disulfide was a significant reinforcement for epoxy.
72
Auditorium 10 3403 ONR Special Symposium on Marine Composites 4 KEYNOTE
Auditorium 11 3404 Fatigue 9
Auditorium 12 3405 Structural Analysis and Optimization 9
3404-1 FATIGUE BEHAVIOR OF WOOD 3403-1 CHARACTERIZATION FILLED POLYPROPYLENE OF SINGLE CARBON FIBER COMPOSITE MATERIALS MECHANICAL BEHAVIOR BY Mohd Nur Azmi Nordin NANO-TENSILE TESTING (Yamaguchi University), Matthew Kant (University Yuki Matsuda (Yamaguchi of Tennessee), Dayakar University), Koichi Goda Penumadu (University of (Yamaguchi University), Tennessee) Hirokazu Ito (Toclas Corporation ) This work demonstrates a novel approach to single fiber This work includes the develtensile testing for measuring opment of woods as reinforcaxial, elastic properties with ing fillers for polymeric matrix high fidelity using small am- to form an environmentally plitude harmonic loading. friendly composite material, i.e. wood-plastic composites (WPCs).
3405-1 BUCKLING AND FIRST-PLY FAILURE OPTIMIZATION OF STIFFENED VARIABLE ANGLE TOW PANELS Momchil Jeliazkov (IMDEA Materials Institute), Claudio Lopes (IMDEA Materials Institute), Mostafa Abdalla (Delft University of Technology), Daniel Peeters (Delft University of Technology)
3404-2 MEAN-FIELD BASED FATIGUE DAMAGE MODELING OF COMPOSITES REINFORCED WITH SHORT STRAIGHT AND WAVY FIBERS Yasmine Abdin (KU Leuven), Atul Jain (KU Leuven), Ignace Verpoest (KU Leuven), Stepan V. Lomov (KU Leuven)
3405-2 DESIGN OF PASSIVE MORPHING WING STRUCTURES USING ELASTIC INSTABILITIES Falk Runkel (ETH Zurich), Andres Felipe Arrieta Diaz (ETH Zurich), Paolo Ermanni (ETH Zurich)
Meeting room 18 3406 Experimental Methods for Process Characterisation 1 3406-1 THE COMPACTION BEHAVIOUR OF PREPREGS UNDER PROCESSING CONDITIONS Oliver Nixon-Pearson (University of Bristol), Jonathan Belnoue (University of Bristol), Dmitry Ivanov (University of Bristol), Stephen Hallett (University of Bristol)
Meeting room 19 3407 Short Fibre Composites 1 3407-1 A VALIDATION METHODOLOGY FOR QUANTITATIVE PREDICTION OF ANISOTROPIC MECHANICAL BEHAVIOR IN FIBER REINFORCED THERMOPLASTICS Amin Sedighiamiri (SABIC Innovative Plastics), Tim van Erp (SABIC Innovative Plastics), Julien Cathelin (SABIC Innovative Plastics), Dave Brands (SABIC Innovative Plastics)
Characterisation of compaction behaviour of toughened prepregs was undertaken to The current work presents aid the understanding of mana computationally efficient ufacturing processes covering Fiber reinforced thermoplastwo-level design methodolAFP deposition, hot debulking, tics offer potential for weight ogy for the optimization of and autoclave conditions. reduction and cost out but stiffened compression loaded show anisotropic mechanical panels having variable stiffbehavior. This has to be ness panels as their skin. accounted for during the development of such part.
3406-2 OPTICAL PERMEABILITY MEASUREMENT ON TUBULAR BRAIDED REINFORCING TEXTILES Christian Schillfahrt (Montanuniversität Leoben), Ewald Fauster (Montanuniversität Leoben), Ralf Schledjewski (Montanuniversität Leoben)
This investigation presents a concept of utilising local In this paper modelling elastic instabilities for passive approach is proposed for bending-twisting shape A novel approach for measurpredicting the quasi-static adaptation of compliant wing ing the unsaturated 1D perand fatigue behavior of short structures. meability of braided textiles is random fiber reinforced introduced. Furthermore, the composites in the framework influence of the compaction of mean-field homogenization pressure on the impregnation techniques. behavior is investigated.
3407-2 DAMAGE TOLERANT TOW-BASED DISCONTINUOUS COMPOSITES Soraia Pimenta (Imperial College London), Akshaya Ahuja (Imperial College London), Aik Yong Lau (Imperial College London) The properties and failure mechanisms of several high-performance discontinuous composites are analysed, revealing higher fracture toughnesses than in continuous CFRP and a notch insensitive response.
Meeting room 20 3408 Biocomposites 8
Meeting room 17 3409 Recycling of Composites and Sustainability 2 3408-1 THE EFFECT OF 3409-1 RECYCLABILITY PHYSICAL ADHESION OF RANDOMLY-ORIENTED PROMOTION TREATMENTS STRAND THERMOPLASTIC ON INTERFACIAL ADHESION COMPOSITES IN CELLULOSE-EPOXY Dominic Leblanc (McGill COMPOSITE University), Benoit Landry Sanna Siljander (Tampere (McGill University), Marek University of Technology), Jancik (McGill University), Jani Lehmonen (VTT), Essi Pascal Hubert (McGill Sarlin (Tampere University of University) Technology), Jyrki Vuorinen (Tampere University of This paper compares two Technology) recycling approaches for carbon/PEEK randomly-oriIn this study we treated foam ented strand composites formed cellulose fibre sheets manufactured by compression with plasma and atomic layer moulding and their impact on deposition (ALD) treatments flexural properties. to achieve better adhesion between cellulose fibres and epoxy matrix.
3408-2 BENDING FATIGUE AND CREEP PROPERTIES OF KENAFFIBER MAT REINFORCED THERMOSETTING PLASTIC COMPOSITE Yuqiu Yang (Donghua University), Bing Xiao (Donghua University), Toshihiko Hojo (Kyoto Institute of Technology)
3409-2 REGENERATION OF THERMALLY RECYCLED GLASS FIBRE FOR COSTEFFECTIVE COMPOSITE RECYCLING : THE EFFECT OF FIBRE REGENERATION AND MATRIX MODIFICATION Ulf Nagel (University of Strathclyde), Eduardo Saez Rodriguez (University of Strathclyde), Chih-Chuan Kao (University of Strathclyde), Liu Yang (University of Strathclyde), James Thomason (University of Strathclyde) Different approaches to maximise the reinforcement potential of thermally recycled glass fibres were compared. The fibre regeneration was found to be more effective than matrix modification.
Meeting room 16 3410 Damage Tolerance of Composite Structures 4 3410-1 TRACTION SEPARATION RESPONSE OF A UNIDIRECTIONAL CARBON/EPOXY COMPOSITE IN INTRALAMINAR MODE I FRACTURE; EXPERIMENTAL AND NUMERICAL RESULTS. Georgios Pappas (ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE-EPFL), John Botsis (ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE-EPFL) Studies in intralaminar Mode I fracture & bridging mechanisms of a unidirectional CFRP composite. A semi-experimental method uses FBG strains to optimize FE models with an objective bridging profile.
3410-2 NUMERICAL MODELING OF FRACTURE IN TEXTILE COMPOSITES BY VTMS/BSAM X-FEM David Mollenhauer (AFRL), Eric Zhou (University 0f Dayton Reserach Institute), Endel Iarve (University 0f Dayton Reserach Institute) Textile PMC models were generated by VTMS.Stress analysis was accomplished through the BSAM. Delamination and cracks were modeled via an Rx-FEM method
Wednesday 22 July · Scientific Meeting room 5 3411 Textile-Based Composites and Fibre Architecture 9 3411-1 DENSITY DEPENDENT MATERIAL PROPERTIES OF GLASSFIBRE REINFORCED COMPOSITES MADE OF NON-WOVEN FABRICS Matthias Klaerner (Technische Universität Chemnitz), Sebastian Iwan (Technische Universität Chemnitz), Lothar Kroll (Technische Universität Chemnitz)
Meeting room 6 3412 Foams, Cellular and Lattice Materials 4
M1 3414 Fracture and Damage - Materials Scale 3 3412-1 DIRECTLY MASS- 3413-1 EXPLORATORY 3414-1 PREDICTION OF PRODUCTION GROWING STUDY ON THE BEHAVIOUR TENSILE STRENGTH OF METHOD OF CNT AEROGEL OF GLASS/PDCPD UNIDIRECTIONAL CARBON WITH SUPERB LIQUIDCOMPOSITES FIBER COMPOSITES ABSORPTION CAPABILITY Katleen Vallons (KULeuven), CONSIDERING THE Han Wang (Beihang Renata Drozdzak (Telene INTERFACIAL SHEAR University), Min Li (Beihang SAS), Mathieu Charret STRENGTH University), Weibang Lv (Telene SAS), Stepan V. Wonjin Na (Seoul National (Suzhou Institute of NanoLomov (KULeuven) University), Geunsung Lee Tech and Nano-Bionics), (Seoul National University), Yizhou Gu (Beihang Properties of glass fibre Minchang Sung (Seoul University), Shaokai Wang composites based on a National University), Mi(Beihang University), tough thermoset PDCPD Young Kim (Seoul National Qingwen Li (Suzhou Institute and a standard epoxy were University), Heung Nam Han Fibre-reinforced composites of Nano-Tech and Nanocompared. GIc, tensile and (Seoul National University), based on non-woven fabrics Bionics), Zuoguang Zhang compressive properties Woong-Ryeol Yu (Seoul offer a wide range for the (Beihang University) and impact and CAI were National University) modification of elastic/ investigated, dynamic properties like A kind of CNT aerogel, In this research the tensile stiffness, strength and grown by floating catalyst strength of unidirectional damping by varying level of chemical vapor deposition fiber composites was consolidation. method, has great capability predicted considering its of oil-absorption, which can interfacial shear strength. absorb more than 90 times The composite strength of its own weight of oil. was calculated considering the IFSS.
M2 3415 Models Homogenization – Micro to Macro 4 3415-1 A MICROMECHANICS BASED CONSTITUTIVE MODEL FOR PROGRESSIVE DAMAGE ANALYSIS OF COMPOSITE MATERIALS Van Vu (The University of Adelaide), Abdul Hamid Sheikh (The University of Adelaide), Giang Nguyen (The University of Adelaide)
3411-2 MECHANICAL CHARACTERIZATION OF A THERMOPLASTIC CROSSPLY PREPREG FOR HELMET PREFORM MANUFACTURE Lisa Dangora (University of Massachusetts), James Sherwood (University of Massachusetts)
3415-2 DETERMINATION OF EFFECTIVE THERMAL AND THERMO-ELASTIC PROPERTIES OF WOVEN TEXTILE COMPOSITES USING VOXEL BASED VARIATIONAL ASYMPTOTIC UNIT CELL HOMOGENIZATION METHOD Rajeev G Nair (Indian Institute of Technology Bombay), B. Sivasubramonian (Vikram Sarabhai Space Centre), P. J. Guruprasad (Indian Institute of Technology Bombay)
3412-2 THE INFLUENCE OF THE META-ARAMID/EPOXY NANOFIBER MATS ON THE ADHESION STRENGTH AT CRYOGENIC ENVIRONMENTS Seung A Song (Chonbuk national university), Seong Su Kim (Chonbuk national university), Seung Yoon Characterization of tempera- On (Chonbuk National ture-dependent mechanical University) behaviors of a thermoplastic cross-ply to investigate the the influence of the material for use in fabricat- meta-aramid/epoxy nanoing helmet preforms. fiber mats on the adhesion strength at cryogenic environment. Residual strain was measured by FBG sensor with OFDR and FEA was performed
Meeting room 7 3413 Matrix Materials 4
3413-2 STRUCTURE AND PROPERTIES OF SINTERED MATRIX MATERIALS USED FOR FABRICATION OF DIAMOND AND CBN IMPREGNATED TOOLS Elżbieta Bączek (The Institute of Advanced Manufacturing Technology), Barbara Staniewicz-Brudnik (The Institute of Advanced Manufacturing Technology)
3414-2 APPLICATION OF ONSET THEORY TO ONSET OF TRANSVERSE CRACKING IN FABRIC COMPOSITES Shen Hin Lim (UNSW Australia), Garth Pearce (UNSW Australia), Don Kelly (UNSW Australia), Gangadhara Prusty (UNSW Australia), Alan Crosky (UNSW Australia)
The work presents the possibility of application of hybrid of CuSn–base with glass-crystalline materials from the ZnO-B2O3-SiO2PbO system in the production of sintered diamond tools.
A failure theory based on critical strain invariants (Onset Theory) is applied to predict damage locations and failure strain for plain weave fabric specimens manufactured from two material systems.
M3 3416 Nanocomposites for Structural Lightweight Modelling and Testing 3 3416-1 MODELLING AND TESTING OF THE SNAPTHROUGH PROCESS OF CROSS-PLY COMPOSITES Faustino Mujika (UNIVERSITY OF THE BASQUE COUNTRY), M.asuncion CANTERA (UNIVERSITY OF THE BASQUE COUNTRY), Itziar ADARRAGA (UNIVERSITY OF THE BASQUE COUNTRY), Jesús M. ROMERA A new micromechan(UNIVERSITY OF THE ics-based constitutive model BASQUE COUNTRY) is developed for fibre reinforced polymer matrix com- The load-displacement posites having unidirectional curve of bi-stable unsymfibre orientations which metric cross-ply square can incorporate elastic and composite plates supported inelastic responses at four points and loaded by a central concentrated force are analyzed experimentally and numerically.
3416-2 MECHANICAL EFFECTS OF THE INJECTION-CVD NANOSTRUCTURATION OF CARBON-FIBRE COMPOSITES INVESTIGATED BY BUNDLE TENSILE TEST AND DMA Ludovic Chevallier (Institut Clément Ader), Quentin Govignon (Institut Clément Ader), Philippe Olivier (Institut Clément Ader), Gérard Bernhart (Institut Clément Ader), Martine Mayne-L’Hermite (Laboratoire Francis Perrin (CNRS URA 2453))
M4 M5 M6 3417 Manufacturing Up3418 Sensors in 3419 Applications - Civil Scaling and Automation 1 Experimental Mechanics 1 Engineering 2 3417-1 TACK CHARACTERIZATION OF OUT-OF-AUTOCLAVE PREPREGS FOR AFP APPLICATIONS Sanjeev Rao (Khalifa University), Rehan Umer (Khalifa University), Wesley Cantwell (Khalifa University) In this study, the peel resistance of unidirectional out-of-autoclave (OOA) prepregs tapes has been evaluated using floating roller peel tests and Design of Experiments.
3417-2 CURE DEGREE MONITORING OF AN INFUSION PROCESS BY DEFORMABLE ELECTRONIC CIRCUIT WITH INTEGRATED CAPACITIVE SENSORS Yang Yang (Center for Microsystems Technology), Gabriele Chiesura (Ghent University), Thomas Vervust (Center for Microsystems Technology), Frederick Bossuyt (Center for Microsystems Technology), Geert Luyckx (Ghent University), Markus Kaufmann (Sirris Leuven Gent Composites Application Development of voxel based Lab), Joris Degrieck (Ghent variational asymptotic The purpose of this paper is University), Jan Vanfleteren method (VAM) homogenito investigate the effects of (Center for Microsystems zation technique as applied the injection-CVD synthesis Technology) to woven composites to on the mechanical strength determine their thermal/ and more specifically the in- in this paper, we present our thermo-elastic properties. terlaminar shear strength of latest progress in applying nanostructured composites. deformable electronic circuit for the in situ cure degree monitoring of a resin infusion process.
3418-1 ULTRASONIC STRUCTURAL HEALTH MONITORING OF CFRP BY USING NOVEL OPTICAL FIBER SENSING SYSTEMS Qi Wu (the University of Tokyo), Yoji Okabe (the University of Tokyo) We proposed three novel ultrasonic optical fiber sensors based on fiber Bragg grating and erbium fiber laser, and demonstrated their performances in structural health monitoring of composites.
3419-1 COMPRESSION BEHAVIOR OF CONCRETE CYLINDERS EXTERNALLY CONFINED BY FLAX FIBER REINFORCED POLYMER COMPOSITES Guijun Xian (Harbin Institute of Technology), Yuanyuan Xia (Harbin Institute of Technology), Hui Li (Harbin Institute of Technology) Concrete cylinders were confined by FRP tubes wound with flax or hybrid of flax and basalt fibers. A remarkable enhancement of the compressive stress and strain was realized.
programme
M7 3420 New Structural Testing Methods 4
M8 3421 Multifunctional Composites - Smart Structures 1 3420-1 APPLICABILITY OF 3421-1 DESIGN, THE SINGLE CANTILEVER FABRICATION, AND BEAM TEST FOR CHARACTERIZATION OF CHARACTERIZATION OF MULTIFUNCTIONAL WINGS SANDWICH MATERIALS TO HARVEST SOLAR WITH VERY THIN ENERGY IN ROBOTIC FACESHEETS - FRACTURE BIRDS MECHANICAL ANALYSIS Hugh Bruck (university of AND TEST IMPROVEMENT maryland), Satyandra K. Ralf Schaeuble (Fraunhofer Gupta (university of maryInstitute for Mechanics land), Ariel Perez-Rosado of Materials IWM), Anne (university of maryland) Geyer (Fraunhofer Institute for Mechanics of Materials We developed multifuncIWM), Marianne John tional compliant wings with (Fraunhofer Institute for solar cells for flapping wing Mechanics of Materials air vehicles (FWAVs) to IWM), Ralf Schlimper harvest energy, to increase (Fraunhofer Institute for flight time, and to enable Mechanics of Materials recharging without external IWM) sources. A simple and robust SCB test procedure for fracture-mechanical characterization of facesheet/core disbonding of honeycomb core sandwich material is numerically and experimentally analysed.
3418-2 CARBON FIBER EPOXY ATHERMAL STRUCTURES FOR OPTICAL FIBER GRATING WAVELENGTH STABILIZATION C S Shin (National Taiwan University), Yen-Chang Huang (National Taiwan University), Shien-Kuei Liaw (National Taiwan Univ of Science and Technology)
3419-2 SMART COMPOSITE DEMONSTRATOR DECID2 CONCEPT & RESULTS Monssef Drissi-Habti (IFSTTAR)
3420-2 FROM MEASUREMENTS ERRORS TO A NEW STRAIN GAUGE DESIGN FOR COMPOSITE MATERIALS Lars Pilgaard Mikkelsen (Technical University of A large smart composite Denmark), Sanita Zike platform prototype was (Technical University of modeled numerically and Denmark), Jacopo Gili simulations run for three(Technical University of point bending loads in static Denmark) conditions to determine a Stable wavelength is stress damage threshold for Strain gauges is found to required of fiber Bragg grat- future experiments. over-estimate the material ings. Carbon fiber reinforced stiffness with 1-10% for fiblaminate structure is proer rienforced polymers. An posed as a low cost, easy over-estimation depending to mass produce devices significantly on the present to offset their thermally of a soft gelcoat or biax. induced drift.
3421-2 ON MECHANICALLY COUPLED TAPERED LAMINATES WITH BALANCED PLAIN WEAVE AND NON-CRIMP FABRICS Christopher York (University of Glasgow), Mohd Shamsudin (University of Kuala Lumpur) Tapered designs for Balanced Plain Weave and Non-Crimp Fabric laminates is presented which has consistent mechanical coupling characteristics and immunity to thermal warping distortion are preserved.
73
Scientific programme · Wednesday 22 July Congress Hall A 16:20 3401-3 HIGH TEMPERATURE ADDITIVE MANUFACTURING FOR FOR RAPID MANUFACTURE, MODIFICATION AND ADAPTATION OF BESPOKE MILITARY EQUIPMENT Richard Davies (University of Exeter)
Auditorium 15 3402-3 SYNERGY EFFECT IN CARBON NANOTUBES/ONION LIKE MIXED COMPOSITES. Jan Macutkevic (Vilnius university), Ieva Kranauskate (Vilnius university), Juras Banys (Vilnius university), Olga Shenderova (International Technology Center), Nicholas Nunn (International This paper presents an inves- Technology Center) tigation into the use of netshaped reinforced PEEK/CNT The dielectric/electric composites in additive man- properties of polyurethane ufacturing technologies, also composites filled with carbon known as Fused Deposition nanotubes (CNT), onion-like modelling (FDM). carbon (OLC) and mixed OLC/ CNT are compared across a wide frequency range.
16:40
3402-4 MODELLING NANOSCALE GRAPHENE STRUCTURES USING A MULTI-PHYSICS MOLECULAR-DYNAMICS FINITE-ELEMENT METHOD Silvestre Pinho (Imperial College London), Andre Wilmes (Imperial College London)
Auditorium 10 3403-2 FABRICATION AND PERFORMANCE OF CARBON/ EPOXY COMPOSITES WITH HYBRID OF NANOCLAY AND MWCNTS Mahesh Hosur (Tuskegee University), Tanjheel Mahdi (Tuskegee University), Md. Ekramul Islam (Tuskegee University), Alfred TcerbiNarteh (Tuskegee University), Shaik Jeelani (Tuskegee University)
Auditorium 11 3404-3 DAMAGE AND FRACTURE OF LAMINATES UNDER VARIOUS LOADS Christian Hochard (CNRS), Juliette Payan (CNRS), Noel Lahellec (CNRS), Aurore Girardot (CEA), Sandrine Le Roch (CEA)
Auditorium 12 3405-3 COMPOSITE TUBES WITH NOVEL BEND-TWIST COUPLING Sean Rohde (University of Florida), Avinash Jonnalagadda (University of Florida), Aniruddha Savant (University of Florida), Peter Ifju (University of Florida), The paper presents a fracture Bhavani Sankar (University model for UD and woven ply of Florida) laminates under static and fatigue loads, based on the A novel composite tube reduction of strength in the with bend-twist coupling is This paper presents results of fibre direction depending on discussed. A formula for the experimental investigations the transverse damage. distance of the shear center on the inclusion of nanoclay/ from the tube axis in terms of MWCNTs hybrids in enhancmaterial properties and tube ing the performance of carlength is derived. bon/epoxy composites.
Meeting room 18 3406-3 EXPERIMENTALLY VALIDATED MANUFACTURING RELIABILITY FOR COMPOSITE STRUCTURES Douglas Cairns (Montana State University), Michael Bauer (Montana State University)
3403-3 IMPLOSION OF CYLINDRICAL COMPOSITE STRUCTURES SUBJECTED TO UNDERWATER IMPULSIVE LOADS Sid Avachat (Georgia Institute of Technology), Min Zhou (Georgia Institute of Technology)
3404-4 ASSESSMENT OF FATIGUE DAMAGE ONSET AND GROWTH IN PLAIN WEAVE COMPOSITES WITH EMBEDDED FLAWS Ahmed Maslouhi (Université de sherbrooke), Braisaz Paul (Université de sherbrooke), Nassim Kanouni (Université de sherbrooke)
3406-4 NON-CONTACT HOLISTIC MEASUREMENT OF AEROSPACE FASTENER HOLES WITH RING LASER ADAPTIVE OPTICS George Bullen (Northrop Grumman-Ret.)
3405-4 DESIGN AND TESTING OF BI-STABLE DEPLOYABLE BOOMS FOR SPACE APPLICATIONS Mark Pankow (North Carolina State University)
Design and development of deployable structures for small satellite applications. The response of filament This paper examines how A new MDFEM with reactive/ cylindrical carbon-fiber/epoxy The paper proposes an these structures can be decharge force fields is procomposite structures subject- experimental approach using signed and fabricated along posed, including rotational ed to underwater impulsive acoustic emission to generate with the deployment mechaBCs, bending properties of loads is analyzed experimen- lifetimes curves and to predict nism for deploy pillared graphene, graphene tally and computationally. the onset of fatigue damage fracture toughness, virtualand the propagation of an ly-designed porous graphene embedded artificial flaw in sensor. CFRP.
17:15 General Assembly
74
This paper will describe, illustrate, and define new non-contact laser inspection methods for assessing the acceptability of countersinks and holes in aerospace parts made from composite materials.
Meeting room 19 3407-3 A NOVEL HIGH TEMPERATURE SINGLE POLYMER COMPOSITE Mingming Yu (Shanghai university), Bin Feng (Shanghai university), Wang Xie (Shanghai university), Lin Fang (Shanghai university), Liqi liu (Shanghai university), Musu ren (Shanghai university), Jinliang sun (Shanghai university), Xiaofeng wang (Shanghai Tanlon Fiber Co.-Ltd.)
Meeting room 20 3408-3 STRONG AND TOUGH FUNGAL BASED CHITINGLUCAN THIN FILM Wan Mohd Fazli Wan Nawawi (Imperial College London), Koon Yang Lee (Imperial College London), Eero Kontturi (Imperial College London), Alexander Bismarck (University of Vienna)
Meeting room 17 3409-3 RECOVER: REGENERATING THE STRENGTH OF GLASS FIBRES THERMALLY RECYCLED FROM END-OFLIFE COMPOSITES James Thomason (University of Strathclyde), Eduardo Saez-Rodriguez (University of Strathclyde), Chih Chuan Kao (University of Strathclyde), This study investigate the Liu Yang (University of chemical, morphological, and Strathclyde) mechanical properties of thin film made from fungi chitin- Cost-effective treatments The SPC based on polysulous extract. The extract were to restore the massive loss fonamide was prepared, from common mushroom and in strength of glass fibres and the experiments results tree bracket fungi. thermally recycled from endindicated that the SPC had of-life composites have been good thermal properties since developed and investigated. its Tg was over 300oC and decomposition temperature was over 400oc
Meeting room 16 3410-3 IMPROVING THE DAMAGE TOLERANCE OF COMPOSITE JOINTS WITH TUFTING James Kratz (University of Bristol ), Harry Clegg (The National Composites Centre), Giuseppe Dell’Anno (The National Composites Centre), Ivana Partridge (University of Bristol)
3407-4 FORMULATION ABOUT TIME- AND TEMPERATURE- DEPENDENT FLEXURAL MODULUS OF DISCONTINUOUS CARBON FIBER MAT REINFORCED THERMOPLASTICS Wataru NAGATSUKA (The University of Tokyo), Tsuyoshi MATSUO (The University of Tokyo), Fumiaki YANO (Shimadzu Corporation), Kenichi FURUKAWA (Suzuki Motor Corporation), Jun TAKAHASHI (The University of Tokyo)
3408-4 AN INVESTIGATION ON COMPOSITE CONSTITUTED OF PAPER AND RESIN BY VENT-TYPE INJECTION MOLDING MACHINE Keisuke Kitai (Kitai Seisakusyo Co.-Ltd.), Satoshi Harada (Kitai Seisakusyo Co.-Ltd.), Takanori Kitamura (Daiwa Itagami Co.-Ltd.), Mitsunori Suda (Daisankogyo Co.-Ltd.), Zhiyuan Zhang (Daiwa Itagami Co.-Ltd.), Hiroyuki Hamada (Kyoto Institute of Technology)
3410-4 3D WOVEN COMPOSITES FOR ENERGY ABSORBING APPLICATIONS Harun Bayraktar (Albany Engineered Composites), David Ehrlich (Albany Engineered Composites), Jon Goering (Albany Engineered Composites), Michael McClain (Albany Engineered Composites)
It was clarified that the timeand temperature-dependence of flexural modulus of CFRTP is caused by Young’s modulus and out-of-plane modulus influenced from viscoelastic property of matrix resin.
The objective of this research is using composite combining with plastic and paper materials to relieve the depending on timber from ecological thinning.
3409-4 THERMOSET COMPOSITE RECYCLING: TENSILE STRENGTH PROPERTIES OF RECOVERED GLASS FIBER Justine Beauson (DTU), Jakob Ilsted Bech (DTU), Povl Brøndsted (DTU), Helga Nørgaard Petersen (DTU) Four different recycling processes, mechanical, burn off, pyrolysis and glycolysis are selected and compared based on the properties of the glass fiber recovered.
Tufting was used to increase the delamination resistance of T-stiffened panels by inserting carbon threads at the stringer tip. The failure mode changed from skin-stringer separation to web splitting.
This study shows that under three-point bending, a 3D woven composite side intrusion beam has 37% higher specific energy absorption than a similar high-strength steel beam.
Wednesday 22 July · Scientific Meeting room 5 3411-3 A DISCRETE MESOSCOPIC FINITE ELEMENT MODEL USED TO LINK THE MANUFACTURING PROCESS TO THE FINAL PART STIFFNESS Cynthia Mitchell (University of Massachusetts Lowell), James Sherwood (University of Massachusetts Lowell)
Meeting room 6 3412-3 ARCHITECTURE AND PROPERTIES OF STOCHASTIC FOAM MODELS Stefan Hallström (Royal Institute of Technology (KTH)), Joonas Köll (Royal Institute of Technology (KTH))
Meeting room 7 3413-3 CRACK ONSET IN A POLYMER MATRIX WITH OPEN-HOLE CONFIGURATION AND VISCOELASTIC BEHAVIOR. APPLICATION OF THE FINITE FRACTURE MECHANICS COUPLED CRITERION. Afonso Leite (Escuela Recent results from a Técnica Superior de numerical study of the mi- Ingeniería-University of This paper presents a crostructure and constitutive Seville), Vladislav Mantič methodology to link the properties of equilibrium (Escuela Técnica Superior structural properties of a foams are presented and de Ingeniería-University textile-reinforced composite discussed focussing on of Seville), Federico París components and structures relations between topology (Escuela Técnica Superior to deformations seen in the and properties. de Ingeniería-University of textile during forming. Seville) Fracture of stretched openhole PMMA plates is made by Finite Fracture Mechanics using Finite Elements with a linear viscoelastic material model. Predictions of the size effect are made and compared.
M1 3414-3 FAILURE PREDICTION MODEL FOR NCF LAMINATES LOADED IN COMPRESSION AND THE EFFECT OF OFF-AXIS LOADING Anton Shipsha (KTH Royal Institute of Technology), Magnus Burman (KTH Royal Institute of Technology), Johan Ekh (KTH Royal Institute of Technology) Compressive strength of NCF laminates at various off-axis angles was studied experimentally for different lay-ups. Effect of stacking sequence was studied as well. Strength criterion was proposed.
3414-4 EVALUATION OF CORRELATION BETWEEN IMPACT-INDUCED CRACK GROWTH BEHAVER AND INTERLAMINAR FRACTURE TOUGHNESS IN CFRP LAMINATES Yasuhiro KOICHI (Kanazawa Institute of Technology), Hiroshi SAITO (Kanazawa Institute of Technology), Isao KIMPARA (Kanazawa Institute of Technology)
M2 3415-3 IMPACT OF THE NUMERICAL MODEL ASSUMPTIONS ON THE WATER DIFFUSION KINETICS OF A UD COMPOSITES Yoann JOLIFF (MAPIEM SeaTech - Université de Toulon), Lénaïk BELEC (MAPIEM - SeaTech Université de Toulon), JeanFrançois CHAILAN (MAPIEM - SeaTech - Université de Toulon) This work deals with the impact of the numerical models assumptions on the diffusion kinetics of a unidirectional composite. Numerical results are compared with experimental values (from µ-TA).
3415-4 PREDICTION OF CRACK TORTUOSITY IN FIBER REINFORCED COMPOSITE MICROSTRUCTURES Timothy Breitzman (US Air Force Research Laboratory), Eric Zhou (University of Dayton Research Institute)
M3 3416-3 OUT-OF-OVEN CURING OF COMPOSITE LAMINATES VIA RESISTIVE MICROHEATERS COMPRISED OF ALIGNED CARBON NANOTUBE NETWORKS. Jeonyoon Lee (Massachusetts Institute of Technology), Itai Stein (Massachusetts Institute of Technology), Seth Kessler (Metis Design Corporation), Brian Wardle (Massachusetts Institute of Technology) An in siu curing technique for polymer matrix composite using a resistive heating film comprised of an aligned carbon nanotube network enables highly efficient curing while adding multifunctionality.
3416-4 INTERFACIAL DECOHESION IN FIBER RICE HUSK POWDER FAILURE EPOXY COMPOSITE Anil Saigal (Tufts University), Alvaro Del Solar (Tufts University)
M4 3417-3 ASSESSING THE STRUCTURAL RESPONSE OF AFP COMPOSITE STRUCTURES WITH GAPS AND OVERLAPS BY MEANS OF NUMERICAL APPROACHES Falk Heinecke (German Aerospace Center (DLR)), Wouter van den Brink (National Aerospace Laboratory (NLR)), Tobias Wille (German Aerospace Center (DLR)) Focusing on the automated dry fibre placement technique (AFP) the effect on stiffness and strength of manufacturing induced gaps and overlaps are assessed to enable a so called “asbuilt” analysis.
3417-4 STRUCTURAL HEALTH MONITORING AND PROCESSING OF COMPOSITE STRUCTURES USING PHOTONIC SENSING TECHNOLOGY Gangadhara Prusty (UNSW Australia), Ginu Rajan (UNSW Australia), Ebrahim The paper deals with 2D Oromiehie (UNSW Australia), This paper considers the analysis of a biocomposite Paul Compston (Australian tortuosity of a minimal consisting of 30 vol. percent National University) energy fracture surface of rice husk powder in an through a fiber reinforced epoxy resin matrix in which Utilizing FBG sensors for In this study, we compared microstructure with variable the interfacial decohesion structural health monitoring mapping of fracture mode in fiber volume fractions and failure initiates between of composite laminates CFRP laminates after impact material fracture properties. 1-2% strain. and demonstrate their and the result of numerical capabilities for for on-line simulation, and identified monitoring of lay-up process consistency between these. in the advanced robotic composites.
M5 3418-3 HEALTH MONITORING OF WOVEN COMPOSITE STRUCTURES BY STRAIN FIELD METHODS: COMPARISON BETWEEN FIBRE BRAGG GRATING SENSORS ARRAYS AND DIGITAL IMAGE CORRELATION. Md Kharshiduzzaman (Politecnico di Milano), Andrea Bernasconi (Politecnico di Milano), Lorenzo Comolli (Politecnico di Milano) In this work the response of fiber Bragg grating (FBG) sensors is studied for non-uniform strain field present in woven composites for strain based SHM applications and compared with DIC results.
M6 M7 3419-3 IN-PLANE STRUCTURAL BEHAVIOR OF MASONRY WALLS STRENGTHENED WITH AN INNOVATIVE HEMP-BASED COMPOSITE SYSTEM Costantino Menna (University of Naples Federico II), Domenico Asprone (University of Naples Federico II), Massimo Durante (University of Naples Federico II), Alberto Zinno (Stress S.c.a r.l.), Anna Bozza (University of Naples Federico II), Andrea Prota (University of Naples Federico II) The in-plane structural behavior of masonry panels strengthened with an innovative hemp-based composite system was assessed by means of diagonal compression tests. A good performance was achieved. 3419-4 MECHANICAL BEHAVIOR OF BFRP-STEEL COMPOSITE PLATE UNDER AXIAL TENSION Yanlei Wang (Dalian University of Technology), Yunyu Li (Dalian University of Technology)
programme M8 3421-3 NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF THIN-WALLED NEUTRALLY STABLE DEPLOYABLE COMPOSITE BOOMS Yang Liuyi (Harbin Institute of Technology), Tan Huifeng (Harbin Institute of Technology), Cao Zongsheng (Harbin Institute of Technology) A neutrally stbale boom was investigated trhough an analytical model and numerical method. The coiling process was simulated, the strain enerygy of two methods agree well with each other.
A novel BFRP-steel composite plate (BSP) is proposed, where a steel plate is sandwiched between two outer BFRP laminates. The performance of the proposed BSP under uniaxial tension was investigated.
75
Scientific programme · Thursday 23 July Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 8:30 From fibres to tapes, from synthetic to natural fibres: a new generation of textile composites and their applications Ignaas Verpoest, Katholieke Universiteit Leuven, Belgium 4102 Nano Composites 10 4103 ONR Special 4104 Multifunctional 4105 Structural Analysis 4106 Experimental 9:30 4101 Processing Manufacturing Technology Symposium on Marine Composites - Self-Healing and Optimization 10 Methods for Process 10 Composites 5 and Bio-inspired Designs 1 Characterisation 2 9:30 4101-1 OPTIMUM PROCESSING PARAMETERS FOR HOT DRAPE FORMING OF OUT-OF-AUTOCLAVE PREPREG OVER COMPLEX SHAPE USING DOUBLE DIAPHRAGM TECHNIQUE Hassan Alshahrani (Concordia Center for CompositesConcordia University-), Mehdi Hojjati (Concordia Center for Composites-Concordia University-) A double-diaphragm set-up for forming flat prepreg into complex shapes was developed. Formability of out-of-autoclave (OOA) prepregs and the effects of processing parameters were studied.
4102-1 MECHANICAL AND TRIBOLOGICAL PERFORMANCE OF CARBON NANOTUBE BUCKYPAPER REINFORCED EPOXY COMPOSITE Jinhua Han (National Center for Nanoscience and Technology-China), Hui Zhang (National Center for Nanoscience and TechnologyChina), Zhong Zhang (National Center for Nanoscience and Technology-China)
4104-1 SELF-HEALING OF SKIN-STIFFENER DEBOND SPECIMENS UNDER FATIGUE CONDITIONS Rafael Luterbacher (University of Bristol), Richard S. Trask (University of Bristol), Ian P. Bond (University of Bristol)
4105-1 OPTIMAL DESIGN OF VARIABLE THICKNESS COMPOSITE STRUCTURES MADE BY PATCHES USING STACKING SEQUENCE TABLES François-Xavier Irisarri (ONERA), Cédric Julien (ONERA), Dimitri Bettebghor (ONERA)
Intralaminar damage within cross-ply laminates and skin-stiffener debond speci- A bi-level optimization stratmens is addressed via a vas- egy is presented in which cular self-healing approach. stacking sequence tables PIV is used to experimentally are used to link thickness Carbon nanotube buckypaper/ investigate the asymmetric variations to stiffness varicomposites (285 mm in water impact of a rigid wedge. ations within a continuous diameter) with remarkable The effect of a geometric optimization. mechanical and tribological asymmetry on the flow properties, as well as lightning physics and pressure field is strike protection performance studied. have been conducted.
9:50 4101-2 ADVANCED SMC-PROCESSING WITH CONTINUOUS FIBER REINFORCEMENT Florian Gortner (Institut für Verbundwerkstoffe), Luisa Medina (Institut für Verbundwerkstoffe ), Peter Mitschang (Institut für Verbundwerkstoffe)
4102-2 ENCAPSULATION OF MULTIWALL CARBON NANOTUBE VIA SELF-POLYMERIZED POLYDOPAMINE: THE IMPROVEMENT ON PROPERTIES OF ELASTOMERIC POLYURETHANE NANOCOMPOSITES WITH ULTRALOW NANOTUBE The combination of textile LOADINGS reinforcement with a conChenzhong Mu (Nanyang ventional short fiber Sheet Technological University), Molding Compound (SMC) en- Liying Zhang (Nanyang ables the production of com- Technological University), Yujie plex component geometries Song (Nanyang Technological with increased mechanical University), Ming Liu (Nanyang properties. Technological University), Xiao Hu (Nanyang Technological University) A facile and eco-friendly method employing polydopamine (PDA) as a surface treatment agent was used to modify the CNTs surfaces and the influences of PDA-CNTs on nanocomposites were studied as well.
76
4103-1 WATER ENTRY OF ASYMMETRIC WEDGES THROUGH PARTICLE IMAGE VELOCIMETRY Adel Shams (New York University Polytechnic School of Engineering), Mohammad Jalalisendi (New York University Polytechnic School of Engineering), Maurizio Porfiri (New York University Polytechnic School of Engineering)
4103-2 FAILURE MECHANICS OF SANDWICH PANELS SUBJECTED TO WATER SLAMMING Mark Battley (University of Auckland), Tom Allen (University of Auckland)
4104-2 ADDITIVE LAYER MANUFACTURING OF VASCULAR NETWORKS FOR REPEATED SELF-HEALING FUNCTIONALITY Isabel Qamar (University of Bristol), Richard Trask (University of Bristol)
4105-2 STRUCTURAL OPTIMIZATION TO PREVENT CRACK PROPAGATION FOR CFRP CRYOGENIC TANK Hayato Fukui (Tokyo University of Science), Akinori Yoshimura (Japan Aerospace Exploration Agency), Ryosuke Matsuzaki (Tokyo University of Science)
4106-1 INFLUENCE OF PROCESS PARAMETERS ON THE EFFICIENCY OF TRANSVERSE IMPREGNATION OF TEXTILES David Becker (Institut fuer Verbundwerkstoffe GmbH), Joachim Broser (Institut fuer Verbundwerkstoffe GmbH), Peter Mitschang (Institut fuer Verbundwerkstoffe GmbH) By combining transverse permeability measurement with online-compaction monitoring, the influence of pressure drop, flow rate & flow acceleration on the textile impregnation behavior was investigated.
4106-2 INFLUENCE OF COMPACTION BEHAVIOR OF CARBON NCF ON PREFORM MECHANICS FOR CONTINUOUS PROFILE PREFORMING Timo Grieser (Institute fuer Verbundwerkstoffe GmbH), Peter Mitschang (Institute fuer Verbundwerkstoffe GmbH)
Meeting room 19
Meeting room 20
Meeting room 17
Meeting room 16
4107 Fibres 1
4108 Biocomposites 9
4109 Liquid Composites Moulding 1
4110 Sandwich Structures and Materials 1
4107-1 VISCOELASTIC BEHAVIOUR OF SINGLE HEMP FIBRE UNDER CONSTANT AND CYCLIC HUMIDITY ENVIRONMENT - EXPERIMENT AND MODELLING. Vincent Placet (FEMTOST), Ousseynou CISSE (FEMTO-ST), Violaine GUICHERET-RETEL (FEMTOST), Frédérique TRIVAUDEY (FEMTO-ST), Lamine BOUBAKAR (FEMTO-ST)
4108-1 DEGRADATION OF NFC SANDWICH PANELS DUE TO ACCELERATED WEATHERING Benjamin Hornblow (FORCE Technology)
4109-1 VACUUM INFUSION PROCESSING OF CELLULOSE NANOFIBRE NETWORKS Yvonne Aitomäki (Luleå University of Technology), Sergio Moreno Rodríguez (Luleå University of Technology), Staffan Lundström (Luleå University of Technology), Kristiina Oksman (Luleå University of Technology)
4110-1 COMPARING UNREINFORCED AND PINREINFORCED CFRP/PMI FOAM CORE SANDWICH STRUCTURES REGARDING THEIR DAMAGE TOLERANCE BEHAVIOUR Marianne John (Fraunhofer IWM), Anne Geyer (Fraunhofer IWM), Ralf Schlimper (Fraunhofer IWM), Ralf Schäuble (Fraunhofer IWM)
The aim of this study is to investigate and model the time-dependent tensile behaviour of single hemp fibres in view of their integration in composite materials.
4107-2 DEVELOPING MULTIFILAMENT DRAWING FACILITIES FOR PHOSPHATE GLASSES Andrew Parsons (University of Nottingham), Nusrat Sharmin (University of Nottingham), Sharifah Failure mechanics of foam Shaharuddin (International core sandwich panels subAdditive Manufacturing techIslamic University Malaysia), jected to water slamming are niques are used to develop We conducted structural optiIfty Ahmed (University of characterised demonstrating porous vascular networks mizations for CFRP cryogenic The influence of process and Nottingham), Martyn Marshall significant differences in for self-healing applications, propellant tank by using ge- material parameters on com- (Glass Technology Services), damage evolution and permitting multiple healing netic algorithm, and proposed paction behavior of singly-ply Tim Kermeen (Valmiera strength depending on the cycles by keeping the network the structure, which can pre- and multi-ply carbon fiber Glass UK Ltd.), Chris Rudd type of material. intact. vent crack propagation. NCF preforms was investigat- (University of Nottingham) ed to improve stationary and continuous preforming. A prototype multi-filament fibre drawing system was developed to produce bound threads of resorbable phosphate glass fibre. These threads were then used to produce a phosphate glass woven textile.
Epoxy/flax-fibre sandwich panels were shown to be a suitable alternative to birch plywood for the carrying box of a cargo bicycle. UV resistant coating proved effective at preventing colour change. Cellulose nanofibre networks of different porosity are made from fibrillated pulp with the aim of allowing vacuum infusion to be used to manufacture nanocomposites from these networks.
4108-2 WASTE SILK/WOOL HYBRID BIOCOMPOSITES WITH PBS MATRIX: PROCESSING, PROPERTIES AND ELECTRON BEAM TREATMENT EFFECT Donghwan Cho (Kumoh National Institute of Technology), Hwi Yong Lee (Kumoh National Institute of Technology)
4109-2 PERMEABILITY ENHANCEMENT WITH DIFFERENT GLASS FIBER QUASI-UD STRUCTURE ARRANGEMENTS FOR RTMTP PROCESS Guillaume Cazaux (Laboratoire Ondes et Milieux Complexes - Université du Havre), Laurent Bizet (Laboratoire Ondes et Milieux Complexes - Université du Havre), Joël The study is focusing on pro- Bréard (Laboratoire Ondes cessing hybrid biocomposites et Milieux Complexes with waste silk/wool fibers Université du Havre), Moussa and PBS and on characteris- Gomina (Centre National de ing the electron beame treat- Recherche Technologique ment effect on the thermal Materiaux - ENSICAEN), Elena and mechanical properties. Syerko (Ecole Centrale de Nantes), Sebastien ComasCardona (Ecole Centrale de Nantes), Christophe Binetruy (Ecole Centrale de Nantes), Gilles Orange (Solvay) The common work of TAPAS project members propose an in-plane permeability comparison of three different glass fiber fabrics structures, characterized by experiments and analytical/numerical models.
The SCB-test is used to determine the Energy Release Rate (ERR) as a characteristic value of the Damage Tolerance behavior of unreinforced and pin-reinforced CFRP/PMI foam core sandwich structures.
4110-2 STRAIN VISUALISATION OF COMPOSITE SANDWICH STRUCTURES WITH DIFFERENT CORE MATERIALS FOR WIND TURBINE BLADES Cihan Kaboglu (Imperial College London), Soraia Pimenta (Imperial College London), Andy Morris (EDF Energy), John P. Dear (Imperial College London) This work studies the effect of grading the density of the core material of sandwich structures. It is shown that a uniform core maximises flexural strength, but a graded core may delay final failure.
Thursday 23 July · Scientific Meeting room 5
Meeting room 6
Meeting room 7
4111 Multifunctional Composites - Adaptive Response and Reconfiguration 3 4111-1 COMPARING DIFFERENT NANOPARTICLE EMBEDDING IN A POLYMERIC MATRIX TOWARD MULTIFUNCTIONALITY Biswajit Basu (Trinity College), Fabio Casciati (University of Pavia), Sara Casciati (University of Catania), Biqiong Chen (University of Sheffield), Andrea Spagnoli (University of Parma)
4112 Composites with Metallic Components 1
4112-1 SYNERGISTIC STRENGTHENING EFFECT IN THE GRAPHENECARBON NANOTUBE HYBRID-REINFORCED ALUMINUM MATRIX COMPOSITES Genlian Fan (Shanghai Jiao Tong University), Zan Li (Shanghai Jiao Tong University), Zhanqiu Tan (Shanghai Jiao Tong University), Zhiqiang Li (Shanghai Jiao Tong University), Qiang Guo Graphene Nanoparticles (Shanghai Jiao Tong Embedded in a Polymeric University), Di Zhang Matrix for Added/value (Shanghai Jiao Tong Multifunctionality. This paper University) reports some aspects of a work-in-progress. Scenarios of extreme environmental conditions.
M1
M2
M3
M4
4113 Ductile and Pseudo- 4114 Models ductile Composites 5 Homogenization – Micro to Macro 5
4115 Identification using Full-Field Measurements
4116 Dynamic Fracture 2
4117 Manufacturing Up4118 Multiscale Modelling 4119 Applications - Wind, 4120 Sensors in 4121 Multifunctional Scaling and Automation 2 of Structures 1 Wave and Tidal Energy 1 Experimental Mechanics 2 Composites - Smart Structures 2
4113-1 ALIGNED SHORT FIBRE COMPOSITES WITH DUCTILE BEHAVIOUR Hana Yu (University of Bristol), Marco Longana (University of Bristol), Gael Grail (Imperial College London), Soraia Pimenta (Imperial College London), Paul Robinson (Imperial College London), Michael Wisnom (University of Bristol), Kevin Potter (University of Bristol)
4115-1 ULTRA-HIGH SPEED FULL-FIELD DEFORMATION MEASUREMENTS TO IDENTIFY THE HIGH STRAIN RATE BEHAVIOUR OF COMPOSITES Haibin Zhu (University of Technology of Troyes), Fabrice Pierron (University of Southampton), Clive Siviour (University of Oxford)
4116-1 EXPERIMENTAL ASSESSMENT AND MODEL DEVELOPMENT OF FIBRE REINFORCED COMPOSITE SANDWICH PANELS SUBJECTED TO OUT-OFPLANE IMPACT LOADING Ingrid Schipperen (TNO)
4114-1 NON-CONFORMAL FINITE ELEMENT HOMOGENIZATION APPLIED TO WOVEN COMPOSITES WITH COMPLEX TEXTILE ARCHITECTURES Benoit Wucher (Cenaero), Stefan Hallström (Royal Institute of Technology (KTH)), David Dumas (Cenaero), Thomas Pardoen (Université catholique de Louvain), Christian Bailly (Université catholique de Highly aligned short fibre Louvain), Philippe Martiny composites with fibre length (e-Xstream engineering), close to the critical value, Frédéric Lani (Université which can bring a nonlinear catholique de Louvain) behaviour, are manufactured and the results are comA simple finite element pared with the analytical procedure is developed for solution. the homogenization of highly-compacted woven textiles, using non-conformal meshing and penetration compensation. 4111-2 SHAPE 4112-2 ON THE 4113-2 EFFECT OF 4114-2 MULTISCALE MEMORY POLYMER BEHAVIOUR OF FIBRE FIBER LENGTH ON THE ANALYSIS FOR NEGATIVE NANOCOMPOSITES: NANO- REINFORCED METAL TENSILE STRENGTH THROUGH-THE-THICKNESS REINFORCEMENT AND MATRIX COMPOSITES OF UNIDIRECTIONALLY POISSON’S RATIO OF MULTIFUNCTIONALIZATION UNDER LOADING AND ARRAYED CHOPPED ELASTIC-VISCOPLASTIC Haibao Lu (Harbin Institute THERMAL CYCLING STRANDS ANGLE-PLY CFRP of Technology), Jinsong CONDITIONS Ichiro Taketa (Toray LAMINATES Leng (Harbin Institute Haofeng Chen (University of Industries-Inc.) Tetsuya Matsuda (University of Technology), Shanyi Strathclyde) of Tsukuba), Keita Goto Du (Harbin Institute of A newly-proposed equa(University of Tsukuba), Technology) The paper investigates the tion closely reflects the Nobutada Ohno (Nagoya shakedown and ratchetting relation between tensile University), Yusuke Research and development behaviour of an idealised strength and fiber length on Kawasaki (Marubeni of shape memory polymer fiber-reinforced MMC that unidirectional composites Information Systems Co.nanocomposites from consists of a square array with a stagger-structure of Ltd.), Shintaro Miyashita nano-reinforcement and of fibers in an aluminium chopped strands (UACS). (Marubeni Information multi-functional will be matrix. Systems Co.-Ltd.) reviewed and discussed in this work. A multiscale analysis for the negative through-thethickness Poisson’s ratio of angle-ply CFRP laminates in the viscoplastic region is performed based on a homogenization theory.
M5
M6
M7
programme
4117-1 AUTOMATION OF COMPOSITE MANUFACTURING USING OFF-THE-SHELF SOLUTIONS; THREE INDUSTRIAL CASES FROM THE AEROSPACE INDUSTRY Andreas Björnsson The behaviour of FRP sand- (Linköping University), Marie wich panels under impact Jonsson (Swerea Sicomp), was studied both experiKerstin Johansen (Linköping This communication prementally and numerically. University) sents a new methodology to It was shown that design obtain composite stiffness for impact and analysis of The paper explores how components at high strain impact loaded panels is off-the-shelf solutions, derate, based on ultra-high possible. veloped for other purposes speed imaging, full-field than composite manufacmeasurements and inverse turing, can be used to build identification. systems for automated composite manufacturing.
4118-1 INTEGRATED MULTI-SCALE MODELLING OF 3D WOVEN STRUCTURES Bassam El Said (University of Bristol), Dmitry Ivanov (University of Bristol), Andrew Long (University of Nottingham), Stephen Hallett (University of Bristol)
4120-1 MANUFACTURING OF HIGH PRESSURE COMPOSITE VESSEL WITH INTEGRATED OPTICAL FIBER SENSORS. LIMITATIONS AND BENEFITS Pawel Gasior (Wroclaw University of Technology), Jerzy Kaleta (Wroclaw University of Technology), A novel integrated Radosław Rybczyński multi-scale modelling In order to study the through (Wroclaw University of framework that allows the thickness variation of Technology) designer to virtually weave, lamina properties in thick compact and simulate the laminates, 60-70mm thick mechanical performance unidirectional GFRP infused of 3D woven composites panels were divided in structures. sub-laminates and tested (static & fatigue).
4121-1 DAMAGE MONITORING OF SANDWICH PANELS BASED ON IMPACT FORCE IDENTIFICATION USING RADIATED SOUNDS Satoshi Atobe (Tohoku University), Masato Muramoto (Tohoku University), Hisao Fukunaga (Tohoku University)
4115-2 IDENTIFICATION OF FAILURE MECHANISMS IN CFRP LAMINATES USING 3D DIGITAL IMAGE CORRELATION Nora Schorer (University of Augsburg), Markus G. R. Sause (University of Augsburg)
4118-2 MULTISCALE ANALYSES OF WOVEN POLYMER MATRIX COMPOSITES: DAMAGE MODELING. Christian Fagiano (ONERA), Aurelien Doitrand (ONERA), Martin Hirsekorn (ONERA), Vincent Chiaruttini (ONERA)
4121-2 EXPERIMENTAL AND NUMERICAL STUDY ON INFLUENCE OF EMBEDDED INTERROGATOR GEOMETRY ON STRUCTURAL PERFORMANCE OF FIBER REINFORCED COMPOSITES Nicolas Lammens (UGent), Geert Luyckx (UGent), Wim Van Paepegem (UGent), Joris Degrieck (UGent)
4116-2 SOFT IMPACT RESPONSE OF LAMINATED GLASS PLATES Iman Mohagheghian (Imperial College London), Yi Wang (Imperial College London), Jie Zhou (Imperial College London), Xintao Guo (Beijing Institute of Aeronautical Materials), The local strain concentra- Maria Charalambides tion of artificially introduced (Imperial College London), defects in unidirectional John Dear (Imperial College composites is investigated London) experimentally and compared to a validated finite Damage development in element modelling. laminated glass plates with different types of polymer inter-layer is investigated under low and high velocity soft impact.
4117-2 IN-LINE QUALITY CONTROL SYSTEM FOR THE INDUSTRIAL PRODUCTION OF MULTIAXIAL NON-CRIMP FABRICS Marcel Haeske (Institut fuer Textiltechnik (ITA) of RWTH Aachen University), Bahoz Abbas (Institut fuer Unternehmenskybernetik e.V. (IfU)), Tobias Fuertjes (Werkzeugmaschinenlabor (WZL) of RWTH Aachen University), Thomas Gries (Institut fuer Textiltechnik (ITA) of RWTH Aachen University) A new approach is presented, in which a real-time system for error detection is developed in order to enable the inline quality control during the production process of NCF.
4119-1 STATIC AND DYNAMIC THROUGH THICKNESS LAMINA PROPERTIES OF THICK LAMINATES Francisco Lahuerta (Knowledge Centre WMC), Rogier Nijssen (Knowledge Centre WMC ), Frans van der Meer (TU Delft (CITG)), Bert Sluys (TU Delft (CITG))
M8
4119-2 DESIGN AND TESTING OF THREE-DIMENSIONAL COMPOSITES FOR FLYWHEEL ROTOR Noboru Hiroshima (The Graduate University for Advanced Studies School of Physical Sciences), Masashi Koyama (MEISEI A finite element strategy University), Hiroshi is proposed to evaluate Hatta (Japan Aerospace the effects of mesoscale Exploration Agency), Yuichi damage on the macroscopic Nagura (Tokyo University of mechanical properties of Science), Ken Goto (Japan woven polymer matrix Aerospace Exploration composites. Agency), Yasuo Kogo (Tokyo University of Science) Carbon fiber reinforced three-dimensional composites were applied to a high speed rotation disk. Based on its optimum design, three types of prototype rotor were made and evaluated by spin test.
4120-2 REAL-TIME PROCESS MONITORING OF 3D PRINTED MULTILAYERED STRUCTURES USING OPTICAL FIBER BRAGG GRATING SENSORS Charoula Kousiatza (University of Piraeus), Dimitrios Karalekas (University of Piraeus) The present work investigates the incorporation of optical fiber Bragg grating sensors for real-time monitoring of strain build up during the fabrication process of 3D printed multilayered structures.
This paper presents a method for identifying impact forces acting on sandwich panels, and also detecting the impact-induced damage using the information obtained by the impact force identification.
This work presents a F.E. technique to model the resin pocket surrounding any inclusion in composites, and the effect on structural performance of the composite host, and is validated by experiments.
77
Scientific programme · Thursday 23 July Congress Hall A 10:10 4101-3 APPLICATIONS AND CHALLENGES OF PREPREG FORMING TECHNOLOGIES IN AIRCRAFT INDUSTRY Jan Christoph Kako (Airbus Operations GmbH)
Auditorium 15 4102-3 CARBON NANOTUBEBASED CONDUCTIVE FILMS FOR INDUCTION WELDING OF THERMOPLASTIC POLYMERS AND COMPOSITES Rouhollah Dermanaki Prepreg Forming is widely Farahani (École de technolapplied in manufacturing of ogie supérieure), Martine reinforced panels in aircraft Dube (École de technologie production. Recently progress supérieure) was made on understanding and description of the proIn this work, two conductive cess, still challenges remain. nanotube-based films are fabricated and tested as new types of heating elements for welding of thermoplastic polymers using microwave and induction welding processes.
10:30 4101-4 INTRODUCTION OF A PRODUCTION TECHNOLOGY FOR THE PRE-ASSEMBLY OF MULTI-MATERIALPREFORMS AIMING AT A LARGE SCALE PRODUCTION Raphael Schnurr (Technische Universität Braunschweig), Christian Löchte (Technische Universität Braunschweig), Franz Dietrich (Technische Universität Braunschweig), Klaus Dröder (Technische Universität Braunschweig), Kristian Lippky (Technische Universität Braunschweig), Fabian Fischer (Technische Universität Braunschweig), Klaus Dilger (Technische Universität Braunschweig)
4102-4 SELF-ASSEMBLED “BRICK-AND-MORTAR” NANOSTRUCTURE INSPIRED BY NATURE: A ROUTE TOWARDS HIGH MECHANICAL PERFORMANCE NANOCOMPOSITES Francois De Luca (Imperial College London), Robert Menzel (Imperial College London), Jonny Blaker (Imperial College London), Milo Shaffer (Imperial College London), Alexander Bismarck (Imperial College London)
A hybrid nanostructure was assembled via Layer-by-Layer assembly to produce a “brickand-mortar” (LDH/PSS)n coatAutomated pre-assembly ap- ing similar to nacre, but with proach for hybrid preforms in all dimensions scaled down to the scenario of a large scale the nanometre lengthscale. production. Development of a first demonstration process for feasibility tests is presented. 10:50 Coffee in the Exhibition
78
Auditorium 10 4103-3 BLAST MITIGATION USING ELASTIC METAMATERIALS WITH DESIGNABLE MULTIDAMPERS Guoliang Huang (University of Missouri)
Auditorium 11 4104-3 THERMAL REGULATION OF VASCULARIZED POLYMER MATRIX COMPOSITES FOR ENHANCED THERMOMECHANICAL PERFORMANCE Anthony M Coppola Elastic metamaterials have (University of Illinois at been intensively studied in re- Urbana-Champaign), Nancy R cent years due to their unusu- Sottos (University of Illinois at al properties in manipulating Urbana-Champaign), Scott R elastic waves which are not White (University of Illinois at readily available in nature. In Urbana-Champaign) the paper, an elastic me Results from thermomechanical testing of actively cooled vascularized polymer matrix composites are presented and compared to non-cooled composites. Performance is greatly enhanced by active cooling.
4103-4 FUNCTIONALLY GRADED COMPOSITES WITH VERTICALLY ALIGNED CARBON NANO-TUBE (VACNT) EMBEDDED LAYERS FOR ENERGY ABSORPTION Prabhakar Mantena (UNIVERSITY OF MISSISSIPPI), Veera Boddu (ERDC) Dynamic Mechanical Analysis and high strain-rate SHPB compression response of woven fiber-glass polyester/polyurethane matrix composites with embedded VACNT forest layers, is presented.
Auditorium 12 4105-3 IN-PLANE MATERIAL CONTINUITY FOR THE DISCRETE MATERIAL OPTIMIZATION METHOD René Sørensen (Aalborg University), Erik Lund (Aalborg University)
Meeting room 18 4106-3 A COMPARISON OF TWO MEASUREMENT TECHNIQUES FOR DETERMINING THE 2D PERMEABILITY CHARACTERISTICS OF REINFORCING TEXTILES Ewald Fauster In this work, we present in(Montanuniversität plane material filters for mul- Leoben), Harald Grössing ti-material topology optimi(Montanuniversität zation. The filters can impose Leoben), Ralf Schledjewski a minimum length scale onto (Montanuniversität Leoben) the optimized design without the use of a patch approach Two well-known techniques for 2D permeability characterization based on radial flow experiments are investigated in terms of sources for systematic deviations inherent to the results obtained.
Meeting room 19 4107-3 DEVELOPMENTS IN HOLLOW POLYACRYLONITRILE (PAN) AND PAN/CARBONNANOTUBE- (CNT-) BASED CARBON FIBERS Thomas Tsotsis (The Boeing Company), Satish Kumar (Georgia Institute of Technology), Han Gi Chae (Georgia Insititute of Technology), Prabhakar Gulgunje (Georgia Institute of Technology), Bradley Newcomb (Georgia Institute of Technology), Kishor Gupta (Georgia Insititute of Technology) Hollow polyacrylonitrile (PAN) and PAN/carbon nanotube- (CNT-) based carbon fibers were processed using bi-component fiber spinning yielding fibers with moduli exceeding standard-modulus fibers.
Meeting room 20 4108-3 NOVEL BIOPOLYMER COMPOSITES BASED ON WS2 INORGANIC NANOTUBES Mohammed Naffakh (Escuela Técnica Superior de Ingenieros IndustrialesUniversidad Politécnica de Madrid (ETSII-UPM)), Tyler Silverman (Escuela Técnica Superior de Ingenieros Industriales-Universidad Politécnica de Madrid (ETSII-UPM)), Ana M. García (Escuela Técnica Superior de Ingenieros IndustrialesUniversidad Politécnica de Madrid (ETSII-UPM)), Diego A. Moreno (Escuela Técnica Superior de Ingenieros Industriales-Universidad Politécnica de Madrid (ETSIIUPM)), Carlos Marco (Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC)), Gary Elllis (Instituto de Ciencia y Tecnología de Polímeros (ICTP-CSIC)), Alla Zak (Holon Institute of Technology)
The aim of this investigation is to highlight the latest findings on the use of tungsten disulphide (WS2) inorganic nanotubes in the development of novel biopolymer composite materials. 4104-4 INTERLAMINAR 4105-4 CONCURRENT 4106-4 IMPROVED 4107-4 EFFECTS OF 4108-4 DEVELOPMENT FRACTURE OF CF/EP MULTI-SCALE OPTIMIZATION ANISOTROPIC COMBINED TREATMENT ON OF HIGH PERFORMANCES COMPOSITE CONTAINING DESIGN OF COMPOSITE PERMEABILITY THE PROPERTIES OF PBO AND MULTI-FUNCTIONAL A DUAL-COMPONENT FRAME STRUCTURES USING CHARACTERIZATION FIBER AND ITS COMPOSITES PLANT FIBER REINFORCED MICROENCAPSULATED HEAVISIDE PENALIZATION IN UNIDIRECTIONAL Shi Gang (National University COMPOSITES SELF-HEALING SYSTEM DISCRETE MATERIAL INJECTIONS BASED ON of Defense Technology), Zhang Yan Li (Tongji University) Habibah Ghazali (University OPTIMIZATION FLOW FRONT ANGLE Jianwei (National University of Sydney), Lin Ye (University Zunyi Duan (Dalian MEASUREMENTS of Defense Technology), Jiang of Sydney), Ming Qiu Zhang University of Technology), Claudio Di Fratta (ETH Zürich), Dazhi (Changsha) (Zhongshan University) Jun Yan (Dalian University François Trochu (École of Technology), Guozhong Polytechnique de Montréal), Combined treatment of γ-ray An experimental study on Zhao (Dalian University of Paolo Ermanni (ETH Zürich) radiation, PPA etching and self-healing ability of carTechnology) coupling agent coating to bon fibre/epoxy composite The work illustrates simple PBO fibers was proposed (Vf=65%) with microencapWith considering specific and cost-effective strategies and effects on mechanical sulated epoxy and mercaptan manufacturing constraints to accurately characterize properties of the PBO and as healant. Recovery of 80% representative actual indus- in-plane permeability by 1D PBO/epoxy composites were original fracture toughness trial requirement, the paper injections along only one or investigated. was achieved. realizes the concurrent mul- two textile directions, instead ti-scale design optimization of of the conventional three. composite frame structure.
Meeting room 17 4109-3 CAPILLARY WICKING IN FLAX FIBERS REINFORCEMENTS; ORTHOTROPIC ISSUES AND COMPARISON WITH CARBON REINFORCEMENTS Monica Francesca Pucci (Ecole des Mines de SaintEtienne), Pierre-Jacques Liotier (Ecole des Mines de Saint-Etienne), Sylvain Drapier (Ecole des Mines de SaintEtienne)
Meeting room 16 4110-3 VIRTUAL TESTING OF NOMEX HONEYCOMB SANDWICH PANEL INSERTS Ralf Seemann (Institute of Product Development and Mechanical Engineering Design-Technische Universität Hamburg-Harburg (TUHH)), Dieter Krause (Institute of Product Development and Mechanical Engineering Design-Technische Universität Hamburg-Harburg (TUHH))
Capillary wicking in treated and untreated flax fibers reinforcements. Orthotropic issues in capillary pressure characterization and comparison with carbon reinforcements.
The study develops a detailed progressive failure model based on the Finite Element Method (FEM) for the widely used fully potted threaded sandwich insert under pullout loading.
4109-4 MANUFACTURING AND TESTING OF CURVED FIBER COMPOSITES USING VACUUM ASSISTED RESIN TRANSFER MOULDING (VARTM) AND FDMTECHNOLOGY Jens Schuster (University of Applied Sciences), Monis Kazmi (University of Auckland), Johannes Lutz (University of Applied Sciences Kaiserslautern)
4110-4 STATIC RESPONSE OF SANDWICH BEAMS USING A VARIABLE STIFFNESS HONEYCOMB CORE Qing Ai (Univeristy of Bristol), Paul Weaver (Univeristy of Bristol), Mahdi Azarpeyvand (Univeristy of Bristol)
A novel sandwich beam model is proposed and the effect of stiffness variation in the core on static response of 3D-printing is used to produce the sandwich beam has been single and double curved investigated parametrically molds for vacuum assisted using the present formulation. resin transfer molding (VARTM). The produced parts were evaluated in terms of thickness variations and shear strength.
Thursday 23 July · Scientific Meeting room 5 4111-3 MAGNETOMECHANICAL ACTUATION OF FERROMAGNETIC SHAPE MEMORY ALLOY COMPOSITES Susanne Glock (EPFL), Luis Canal (EPFL), Veronique Michaud (EPFL)
Meeting room 6 4112-3 HIGH STRENGTH AND SUPERIOR OXIDATION RESISTANCE OF HYBRID (TIC+TIB)/TI6AL4V COMPOSITES WITH NOVEL NETWORK ARCHITECTURE Lujun Huang (Harbin Institute of Technology), Shaolou Wei (Harbin We investigated the magInstitute of Technology), neto-mechanical actuation Wei Ren (Harbin Institute behaviour of composites of Technology), Lin made with Ni-Mn-Ga single Geng (Harbin Institute of crystalline rods embedded Technology) into epoxy, and compared with a FE analysis.
4111-4 EMERGENT MECHANICAL ADAPTIVITY: CONTROLLING ACTUATION AND LOCOMOTION THROUGH GEOMETRYCOMPOSITION-GRADIENT CORRELATIONS IN COMPOSITE MATERIAL SYSTEMS Richard A. Vaia (Air Force Research Laboratory), Phil Buskohl (Air Force Research Laboratory), David Wang (Air Force Research Laboratory), Loon-Seng Tan (Air Force Research Laboratory) The design of semi-autonomous materials comprised of active-nodes in an inactive-matrix is demonstrated using polyimides that exhibit motion via energy harvesting from a vapour gradient.
4112-4 MICROSTRUCTURE AND PROPERTIES OF IN-SITU TIB2 PARTICLE REINFORCED AL-4.5CU COMPOSITES Qi Gao (Huazhong University of Science and Technology), Shusen Wu (Huazhong University of Science and Technology), Shulin LÜ (Huazhong University of Science and Technology), Xuecheng Duan (Huazhong University of Science and Technology) 5vol% TiB2/Al-4.5Cu composites were prepared by the salt-metal reactions . The size of TiB2 particles is under 0.4μm. extremely refined equiaxial grains are formed. mechnical properties have improved.
Meeting room 7 4113-3 EXPERIMENTAL STUDY OF THE STRESS TRANSFER IN DISCONTINUOUS COMPOSITES ON THE BASIS OF A UNIT CELL MODEL Benjamin Bachmann (University of Applied Sciences and Arts Northwestern Switzerland), Jeremias Blum (University of Applied Sciences and Arts Northwestern Switzerland), Lian Giger (University of Applied Sciences and Arts Northwestern Switzerland), Kunal Masania (University of Applied Sciences and Arts Northwestern Switzerland), Clemens Dransfeld (University of Applied Sciences and Arts Northwestern Switzerland), Jesus Maldonado (ETH Zürich)
M1 4114-3 ACCOUNTING FOR FIBER BENDING EFFECTS IN HOMOGENIZATION OF LONG FIBER REINFORCED COMPOSITES Konstantinos Poulios (Technical University of Denmark), Christian Niordson (Technical University of Denmark)
M3 4116-3 IMPACT DAMAGE RESPONSE OF CARBON FIBRE-REINFORCED AEROSPACE COMPOSITE PANELS Hamed Yazdani Nezhad (Irish Centre for Composites Research-Materials and Surface Science InstituteUniversity of Limerick), Anthony Auffray (Limerick), A homogenized finite-eleConor McCarthy (Irish ment model is presented, Centre for Composites which captures the miResearch-Materials and cro-mechanical behavior of Surface Science Institutelong fiber reinforced com- A two-scale identification University of Limerick), posites accurately, including strategy based on the mod- Ronan O’Higgins (Irish the contribution of the fiber ified constitutive relation Centre for Composites bending stiffness. error is proposed to find Research-Materials and heterogeneous properties at Surface Science Institutethe measurement level and University of Limerick) homogeneous ones at the specimen level. This research looks into the damage response and energy absorption behaviour of carbon fibre-reinforced thermoplastic and thermoset The stress-strain response polymer composite panels of thermoplastic composites subjected to low-velocity with a discontinuous ‘brickimpact events. and-mortar’ archi-tecture was determined experimentally and compared to shear-lag stress transfer model predictions.
4114-4 MODELING CHAIN FOR HOMOGENISATION AT MESOSCOPIC SCALE: APPLICATION FOR COMPOSITE MATERIALS WITH 3D WOVEN FABRICS Julien SCHNEIDER (SNECMA), Yanneck WIELHORSKI (SNECMA), Gaëtan HELLO (LMEE), Damien DURVILLE (LSSMAT (ECP))
M2 4115-3 MULTI-SCALE IDENTIFICATION USING M-CRE BASED ON FULLFIELD MEASUREMENTS Shaojuan Huang (Laboratoire RobervalUniversité de Technologie de Compiègne), Pierre Feissel (Laboratoire RobervalUniversité de Technologie de Compiègne), Pierre VILLON (Laboratoire RobervalUniversité de Technologie de Compiègne)
4115-4 ASSESSING 3D MECHANICAL PROPERTIES OF COMPOSITES BASED ON DIGITAL IMAGE CORRELATION Guillaume Seon (University of Texas Arlington), Andrew Makeev (University of Texas Arlington), Julia Cline (University of Texas Arlington), Erian Armanios (University of Texas Arlington)
4116-4 DELAMINATIONS AND ULTRASOUND ASSISTED REPAIR OF BALLISTICALLY LOADED GFRP Mikhail Zhikharev (South Ural State University), Sergei Vaulin (South Ural State University), Sergei Sapozhnikov (South Ural State University)
M4 4117-3 ADDITIVE MANUFACTURE OF MULTIFUNCTIONAL COMPOSITE STRUCTURES Konstantine Fetfatsidis (Aurora Flight Sciences), Christopher Hansen (University of Massachusetts Lowell), Andrew Burke (University of Massachusetts Lowell), Bradford Olson (University of Massachusetts Lowell), Harshal Tarar (University of Massachusetts Lowell)
M5 4118-3 A NEW METHOD OF SHEAR STIFFNESS PREDICTION OF PERIODIC TIMOSHENKO BEAMS Liang Xu (Dalian University of Technology), Gengdong Cheng (Dalian University of Technology), Sinan Yi (Dalian University of Technology)
M6 4119-3 EVALUATION OF SIMPLIFIED LOADING MODELS FOR FINITE ELEMENT ANALYSIS OF COMPOSITE WIND TURBINE BLADES Rosemary Barnes (UNSW), Evgeny Morozov (UNSW), Krishna Shankar (UNSW)
M7 4120-3 DYNAMIC DEFORMATION MONITORING OF GFRP BEAM USING OPTICAL FIBER DISTRIBUTED SENSING SYSTEM BASED ON OPTICAL FREQUENCY DOMAIN REFLECTOMETRY Daichi Wada (The University of Tokyo), Hideaki Murayama (The University of Tokyo), Tetsuo Tamaoki (The University of Tokyo), Daichi Ogawa (The University of Tokyo)
This paper presents a presents a new method of shear stiffness prediction of periodic heterogeneous beams based on the new numerical implementation Automated Fiber Placement of AH method which the auand 3D Printing are used thors developed earlier. to fabricate multifunctional composites using aerospace-grade carbon fiber prepreg with autoclave and out-of-autoclave thermoset epoxy resin systems.
3 loading approximations used in wind turbine blade analysis were compared: CFD load, uniform pressure and tip force. An FEA model was analysed and topological optimisation was This paper demonstrates performed for each. the dynamic identification of the deformation of GFRP in the state of vibration using an optical fiber distributed sensing system. A measurement rate was more than 800S/s.
4117-4 IN-SITU CONSOLIDATION OF PEEK COMPOSITES BY AUTOMATED PLACEMENT TECHNOLOGIES Fernando Rodriguez-Lence (FIDAMC AIRBUS GROUP INNOVATION)
4119-4 BRIDGING THE GAP BETWEEN COUPON TESTS AND FULL-SCALE BLADE TESTS Arno Van Wingerde (Fraunhofer IWES), Simon Pansart (DNV-GL), Florian Sayer (Fraunhofer IWES), Eric Putnam (Fraunhofer IWES)
4118-4 MULTISCALE MODELLING APPROACH FOR FLEXIBLE RISERS Sridhar Narayanaswamy (Institute of High Performance Computing), Tianfu Guo (Institute of High Performance Computing), Zhiqian Zhang (Institute FIDAMC has developed a of High Performance thermoplastic fibre placeComputing), Pham Dinh ment technology based on Chi (Institute of High There were studied the laser beam heating that will Performance Computing), factors influenced on the enable in-situ consolidation Ben Edmans (Lloyd’s Simultaneous assessment rheological properties of the of the thermoplastic materi- Register GTC), Graham of stress-strain curves in matrix in terms of capillary al out of the autoclave. Stewart (Lloyd’s Register all principal material planes effects for repair of delamiEnergy) using a unidirectional small- nation at the length up to 20 plate torsion specimen and mm for 1.5 min. We present developments a full-field strain optimizain the linking of small scale tion method based on DIC local nonlinear structural and FEM behavior with large scale global dynamic analysis and demonstrate its application for unbonded flexible riser pipes.
The rotor blade industry lacks subcomponent tests in its development cycle, needed to lower development costs and improve overall reliability. DNV-GL and Fraunhofer IWES are establishing such tests.
programme M8 4121-3 RIGIDITY TUNABLE MULTIFUNCTIONAL COMPOSITES FOR SOFT ROBOTICS Wanliang Shan (University of Nevada-Reno), Carmel Majidi (Carnegie Mellon University) Methods for rigidity tuning in soft robotics through multilayered composite that is directly powered with electrical current; Potential applications are demonstrated with a soft pneumatic finger
4121-4 ACTIVE WING SHAPE RECONFIGURATION USING A VARIABLE CAMBER COMPLIANT WING SYSTEM James Joo (US Air Force Research Laboratory ), Christopher Marks (University of Dayton Research Institute), Lauren Zientarski (University of Dayton Research Institute) US Air Force Research Lab designed and fabricated a Variable Camber Compliant Wing and demonstrated a new capability and technology for an active wing camber change without discrete control surfaces.
79
Scientific programme · Thursday 23 July Congress Hall A 11:20 4201 Processing Manufacturing Technology 11
Auditorium 15 4202 Nano Composites 11
11:20 KEYNOTE
4202-1 DENSIFYING EFFECT ON THE PROPERTIES OF 4201-1 IMPREGNATION CARBON NANOTUBE FILM PERFORMANCE OF NONYanjie Wang (Beihang ISOBARIC PROCESSES University), Min Li (Beihang Peter Mitschang (Institut für University), Yizhuo Gu Verbundwerkstoffe GmbH), (Beihang University), Xiaohua Marcel Christmann (Simona Zhang (Suzhou Institute of AG), Luisa Medina (Institut für Nano-Tech and Nano-Bionics), Verbundwerkstoffe GmbH) Shaokai Wang (Beihang University), Qingwen Li Scope of the paper is to (Suzhou Institute of Nanointroduce a process model, Tech and Nano-Bionics), which is capable to predict Zuoguang Zhang (Beihang the impregnation performance University) for non-isobaric process conditions. The effects of densifying process parameters and densifying methods on the mechanical properties of CNT film fabricated from spinnable array were studied.
11:40
4202-2 STRUCTURE AND PERFORMANCE OF SILICON-CONTAINING POLYARYLACETYLENEATTAPULGITE NANOCOMPOSITES Jiadong Zhan (East China University of Science and Technology), Qiaolong Yuan (East China University of Science and Technology), Farong Huang (East China University of Science and Technology), Lei Du (East China University of Science and Technology) Rod-like attapulgite particles (ATT) were used to reinforce the silicon-containing polyarylacetylene resin (PSA). The particle networks constructed in ATT/PSA affect the property of the nanocomposite
80
Auditorium 10 4203 ONR Special Symposium on Marine Composites 6
Auditorium 11 4204 Multifunctional Composites - Self-Healing and Bio-inspired Designs 2
Auditorium 12 4205 Structural Analysis and Optimization 11
Meeting room 18 4206 Experimental Methods for Process Characterisation 3
4203-1 EXTENDED HIGH ORDER THEORY FOR SANDWICH PANELS AND COMPARISON WITH ELASTICITY George Kardomateas (Georgia Institute of Technology), Yeoshua Frostig (Technion-Israel Institute of Technology), Nunthadech Rodcheuy (Georgia Institute pf Technology)
4204-1 LIGHT WEIGHT AND IMPACT RESISTANT BIOMIMETIC COMPOSITES David Kisailus (University of California)
4205-1 COMPOSITE AIRCRAFT FUSELAGE STRUCTURE BLUNT IMPACT DAMAGE PREDICTION METHODOLOGY Hyonny Kim (University of California San Diego), Zhi Ming Chen (University of California San Diego)
KEYNOTE
The paper presents the response of a curved sandwich panels, within the framework of the EHSAPT model, i.e. where with the circumferential rigidity of the core is considered.
4203-2 ANALYSIS OF FINITE DEFORMATIONS OF THICK PLATES WITH THIRD ORDER SHEAR AND NORMAL DEFORMABLE THEORY (TSNDT) Romesh Batra (Virginia Polytechnic Institute and State University), Arka Chattopadhyay (Virginia Polytechnic Institute and State University)
4204-2 SELF-HEALING COMPOSITES: IN-SITU REPAIR SOLUTIONS? Tim Coope (University of Bristol), Rafael Luterbacher (University of Bristol), Daniel Turkenburg (TNO Materials), Amirhossein Hajdaei (Element Materials Technology), Stefanos Giannis (Element Materials Technology), Konstantinos Kitsianos (GMI Aero), Hartmut Fischer (TNO Materials), Ian Bond (University of Bristol)
Meeting room 20 4208 Biocomposites 10
Meeting room 17 4209 Liquid Composites Moulding 2
Meeting room 16 4210 Sandwich Structures and Materials 2
4207-1 MULTI-SCALE ANALYSIS OF THE AGEING 4206-1 MULTI-SCALE OF A REINFORCED MATERIAL AND PROCESS POLYAMIDE 66 IN ETHANOLCHARACTERIZATION FOR BASED FUELS RESIN TRANSFER MOLDING: Camilo Cruz (Robert Bosch CASE STUDY FOR A GmbH), Enrico Belmonte BLENDED EPOXY/PHENOLIC (Robert Bosch GmbH), RESIN Alexander Lux (Robert Bosch Jonathan Lo (University GmbH), Matthias De Monte This paper presents modeling of Southern California), (Robert Bosch GmbH), Marino development for predicting Mark Anders (University Quaresimin (University of progressive damage to com- of Southern California), Padova) posite aircraft fuselage-type Timotei Centea (University of panels subject to wide area Southern California), Steven Softening by fuel diffusion and blunt impact. Nutt (University of Southern polymer hydrolysis have been California) found as the most relevant degradation mechanisms We describe and demonstrate triggered by an ethanol-based a comprehensive methodolo- fuel on injection-moulded gy for characterizing the prop- fibre reinforced PA66 comerties and complex in-mold posites behavior of a thermoset RTM resin in various temperature and pressure conditions.
4208-1 RAYLEIGH-TAYLOR SPIKES IN HARD AND SOFT NATURAL FIBER COMPOSITES Katharina Resch (University of Delaware), Xintian Su (University of Delaware), Shijin Gong (University of Delaware), Richard P. Wool (University of Delaware)
4209-1 CHARACTERISATION OF FLOW KINETICS AND VOID MIGRATION IN RFI PROCESS Simon B. Gosselin (University of Ottawa), François Robitaille (University of Ottawa)
4210-1 RESIN FILLET FORMATION IN HONEYCOMB SANDWICH STRUCTURES Matt Jennings (Deakin University), Mandy de Souza (Deakin University), Claudia Creighton (Deakin University), Anthony Pierlot (CSIRO), Steven Agius (Deakin University), Bronwyn Fox (Deakin University)
4205-2 CONSIDERATION OF ADHESIVE JOINTS FOR A MULTI-MATERIAL TOPOLOGY OPTIMIZATION APPROACH Paul Falkenberg (Technische Universität Braunschweig), Thilo Franke (Volkswagen AG), Sierk Fiebig (Volkswagen AG), Thomas Vietor (Technische Universität Braunschweig)
4208-2 PREDICTION OF LINEAR DISSIPATIVE PROPERTIES OF FLAX FIBRES REINFORCED LAMINATES WITH VIBRATION ANALYSIS Marouane Belaïd (ISAT Université de Bourgogne), Ali El Hafidi (ISAT - Université de Bourgogne), Stéphane Fontaine (ISAT - Université de Bourgogne), Papa-Birame Gning (ISAT - Université de Bourgogne), Benoît Piezel (ISAT - Université de Bourgogne)
4209-2 A FAST MARCHINGLEVEL SETS APPROACH FOR THE DISTANCE FIELD COMPUTATION AND ITS APPLICATION IN LIQUID COMPOSITE MOLDING PROCESS PERFORMANCE INDICATORS Luis Domenech (University CEU Cardenal Herrera), Fernando Sanchez (University CEU Cardenal Herrera), Victor García (University CEU Cardenal Herrera), Enrique Cortes (Aerox Advanced Polymers), Elias Cueto (University of Zaragoza), Francisco Chinesta (Ecole Centrale Nantes)
The challenge lies in integrating the design of adhesive joints in the multi-material topology optimization process. Two modelling and a mechanA novel epoxy resin containing ical stress-based optimization reversible bondable Dielsapproach are shown. Alder structures is developed and implemented into FRP composites to provide a self-healing functionality.
Meeting room 19 4207 Short Fibre Composites 2
4207-2 DEFORMATION AND FRACTURE BEHAVIOR OF INJECTION-MOLDED GLASS FIBER/POLYAMIDE 66 COMPOSITES WITH HIGH VOLUME FRACTION OF GLASS FIBER Kazuya Mizumoto (YKK Corporation), Kazuaki Sanada (Toyama Prefectural University), Makoto Kawagoe (Toyama Prefectural University), Mai Mizubayashi (YKK Corporation) The effects of the fiber orientation and fiber volume fraction on the tensile and fracture properties of glass fiber/polyamide 66 composites produced via injection molding were investigated.
Direct observations of resin flow and void formation during fabrication of composites Morphology and properties of produced using the resin film eco-leather, a highly innova- infusion (RFI) process are This study discusses the tive soft composite based on presented. effect of heating rate during natural fibers and bio-based cure on the size and shape liquid molding resins are of resin fillets in honeycomb discussed. sandwich structures using null hypothesis significance testing.
Experimental and numerical approaches to identify the viscoelastic properties of flax fibre reinforced epoxy comA technique that computes posite laminates are proposed numerically approximate in this study. distance fields by invoking computational geometry is presented to relate the distance of the flow path to the filling time in LCM processes.
4210-2 CREEP BEHAVIOUR OF GEOMETRICALLY NONLINEAR SOFT CORE SADNWICH PANELS Ehab Hamed (University of New South Wales), Yeoshua Frostig (Technion – Israel Institute of Technology) The paper investigates the effects of creep of the core material on the global geometrically nonlinear behavior of sandwich panels under axial and lateral loading conditions.
Thursday 23 July · Scientific Meeting room 5 4211 Multifunctional Composites - Coupled Properties and Multiphysics Models 1 KEYNOTE 4211-1 MULTI-SCALE COMPUTATIONAL MODELING FRAMEWORK FOR COUPLED ELECTROMAGNETICS AND MECHANICAL SIMULATIONS IN MULTIFUNCTIONAL MATERIALS Somnath Ghosh (Johns Hopkins University)
programme
Meeting room 6 4212 Composites with Metallic Components 2
Meeting room 7 M1 4213 Hybrid Composites 1 4214 Fracture and Damage - Materials Scale 4
M2 4215 Digital Image Correlation 1
M3 M4 M5 M6 M7 M8 4216 Durability, Creep and 4217 Manufacturing Up4218 Multiscale Modelling 4219 Applications - Wind, 4220 Sensors in 4221 Multifunctional Agressive Environment 1 Scaling and Automation 3 of Structures 2 Wave and Tidal Energy 2 Experimental Mechanics 3 Composites - Smart Structures 3
4212-1 NANO TITANIUM CARBIDE PARTICLE REINFORCED ALUMINUM COMPOSITE MATERIALS PREPARED BY BALL MILLING FOLLOWED BY REACTIVE SINTERING Hiroki Kurita (CEA Saclay), Nassim Samer (University of Claude Bernard Lyon 1), Jérôme Andrieux (University of Claude Bernard Lyon 1), Olivier Dezellus (University of Claude Bernard Lyon 1), Sophie Gourdet (Airbus Group Innovations), Takamichi Miyazaki (Tohoku University), Olivier Martin (Mecachrome), Laurent Chaffron (CEA Saclay)
4213-1 TENSILE PROPERTIES OF CARBON NANOTUBES-SHEETS/ CARBON FIBERS/ EPOXY AND CARBON NANOTUBES-GRAFTED CARBON FIBERS/EPOXY HYBRID COMPOSITES Kimiyoshi Naito (National Institute for Materials Science), Vikum Premalal (Shizuoka University), Hiroyuki Oguma (National Institute for Materials Science), Yoshinobu Shimamura (Shizuoka University), Yoku Inoue (Shizuoka University)
4215-1 INVESTIGATION OF THICKNESS EFFECTS ON SHEAR CHARACTERISATION OF COMPOSITES MATERIALS FOR AIRCRAFT STRUCTURES Kuangyi Zhang (Imperial college London), Long Yu (Imperial College London), Yuming Jia (Aviation Industry Corporation of China), Bamber Blackman (Imperial College London), John Dear (Imperial College London), Gordon Williams (Imperial College London)
4216-1 ON THE ADHESIVE PROPERTIES OF NANOSILICA/EPOXY BONDED SINGLE-LAP JOINTS Helezi Zhou (University of Sydney)
4214-1 DAMAGE EVOLUTION OF CARBON EPOXY LAMINATES FOR TIDAL BLADES APPLICATION Nicolas Carrere (LBMS/ Ensta-Bretagne), Nicolas Tual (LBMS/Ensta-Bretagne), Peter Davies (IFREMER)
The tensile properties of carbon fiber reinforced The ultimate tensile strength polymer matrix composites of Al–34 vol% nano TiC incorporating CNT-sheets composite fabricated with- (CNT-sheets/carbon fibers) out the use of nanometric and CNT-grafted carbon powders as a starting ma- fibers were investigated. terial was 628 MPa with a failure elongation of 4.2 %.
4212-2 MECHANICAL PROPERTIES OF CAST ALUMINIUM MATRIX COMPOSITES REINFORCED WITH SIC AND AL2O3 PARTICLES Kim-Niklas Antin (Aalto University) Cast aluminium alloys can be particle reinforced, but the processing route is difficult. We report mechanical properties of different die cast MMCs and the effect of heat treatment on them.
4213-2 RATIONAL DESIGN OF HYBRID COMPOSITES: A GLOBAL LOAD SHARING ANALYSIS Varun Rajan (Ecole Polytechnique Federale de Lausanne), William Curtin (Ecole Polytechnique Federale de Lausanne)
4214-2 MEASUREMENT OF TENSILE PROPERTIES OF FIBRES USING A DCBSPECIMEN Anders Biel (Technical University of Denmark), Ulf Stigh (University of Skövde)
4217-1 MECHANICAL PROPERTIES OF THERMOPLASTIC COMPOSITES MADE BY AUTOMATED FIBER PLACEMENT Suong Hoa (Concordia This study investigated the University), Minh Duc Hoang effects of nano-silica on the (Concordia University), adhesive properties of epoxy Jeffrey Fortin Simpson by lap-shear test under qua- (Concordia University) si-static and cyclic loading, including the influence of This paper presents the hygrothermal treatment. results of an investigation to determine the mechanical properties of flat coupons made of carbon/PEEK and using Automated Fiber This paper reviews the state Placement. of the art in composite shear testing. The main focus of this research is the effect of thickness and out-ofplane properties on shear strength.
4215-2 NUMERICAL MODELLING AND FULLFIELD MEASUREMENT OF COMPOSITE LAMINATES UNDER BLAST LOADS Mohamed Abderaouf Louar (Royal Military Academy), Hamza Ousji (Royal A novel method is proposed Military Academy), Bachir to perform tensile tests Belkassem (Royal Military using a double cantilever Academy), Lincy Pyl (Vrije beam specimen. Similar Universiteit Brussel), John results are achieved with Vantomme (Royal Military the present method as with Academy) more standardized methods. The results of a series of blast tests on fully clamped square glass fibre reinforced epoxy panels using an explosive driven shock tube are presented and compared to FE simulations.
4216-2 MOISTURE AGING CHARACTERIZATION OF GLASS FIBER REINFORCED POLYAMIDE COMPOSITE Hassan Obeid (GeMUniversité de NantesCentrale Nantes-UMR CNRS 6183), Pascal Casari (GeM-Université de NantesCentrale Nantes-UMR CNRS 6183), Alexandre Clement (GeM-Université de NantesCentrale Nantes-UMR CNRS 6183), Sylvain Freour (GeM-Université de NantesCentrale Nantes-UMR CNRS 6183), Frederic Jacquemin (GeM-Université de NantesCentrale Nantes-UMR CNRS 6183) Due to their excellent specific properties, composite materials are increasingly used in various domains. During their lifetime, these materials can be subjected to aggressive environments including m
4217-2 LASER-VISION INSPECTION SYSTEM FOR AUTOMATED FIBER PLACEMENT (AFP) PROCESS Farjad Shadmehri (Bombardier), Octavian Ioachim (Bombardier), Olivier Pahud (Bombardier), Jean-Evrard Brunel (Bombardier), Alain Landry (Bombardier), Suong V. Hoa (Concordia University), Mehdi Hojjati (Concordia University) A new inspection technique, Laser-Vision inspection system, is presented for inspection of a composite ply manufactured using automated fiber placement (AFP) process.
KEYNOTE 4218-1 STOCHASTIC VIRTUAL TESTS FOR FIBER COMPOSITES Brian Cox (Teledyne) We review micron-scale 3D imaging of a microstructure, statistical analysis of images, a generator of stochastic virtual specimens, and a computational model that tracks discrete damage events
4219-1 A CRITICAL EVALUATION OF STRUCTURAL ANALYSIS TOOLS USED FOR THE DESIGN OF LARGE COMPOSITE WIND TURBINE ROTOR BLADES UNDER ULTIMATE AND CYCLE LOADING D. J. Lekou (Centre for Renewable Energy Sources (CRES)), K. C. Bacharoudis (Centre for Renewable Energy Sources (CRES)), A. B. Farinas (National Renewable Energy Center (CENER)), K. Branner (DTU Wind Energy), P. Berring (DTU Wind Energy), A. Croce (Politecnico di Milano), T. P. Philippidis (University of Patras), G. de Winkel (Knowledge Centre Wind turbine Materials and Constructions (WMC)) Comparison of stiffness and strength predictions under ultimate and cycling load of structural analysis tools for 10-20MW rotor blades from 6 organizations and estimation of modelling uncertainty. 4219-2 COMPARING FATIGUE LIFE ESTIMATIONS OF COMPOSITE WIND TURBINE BLADES UNDER VARIOUS LOAD CASES AND FATIGUE METHODS Oscar Castro (Technical University of Denmark), Matthew Lennie (TU Berlin), Kim Branner (Technical University of Denmark), George Pechlivanoglou (Smart-Blade), Povl Brøndsted (Technical University of Denmark), Christian Navid Nayeri (TU Berlin), Christian Oliver Paschereit (TU Berlin)
4220-1 STRUCTURAL HEALTH MONITORING METHOD FOR WIND TURBINE TRAILING EDGE: CRACK GROWTH DETECTION USING FIBRE BRAGG GRATING SENSOR EMBEDDED IN COMPOSITE MATERIALS Gilmar Pereira (Technical University of Denmark), Lars Mikkelsen (Technical University of Denmark), Malcolm McGugan (Technical University of Denmark) Novel method to assess a crack growing/damage event in composite material using embedded Fibre Bragg Grating (FBG) sensors and application into a composite material structure.
4220-2 COMPOSITE PATCH STRENGTHENED I-BEAM – LONG-TERM PERFORMANCE AND CONDITION MONITORING Jon Harald Lambert Grave (Norwegian University of Science and Technology (NTNU)), Andreas T. Echtermeyer (Norwegian University of Science and Technology (NTNU))
4221-1 EFFECT OF NICKEL COATED CARBON FIBER AND NICKEL COATED GRAPHITE PARTICLES ON INDUCTION HEATING Muhammad Muddassir (Institut für Verbundsvwerkstoffe), Martin Gurka (Institut für Verbundsvwerkstoffe) Induction heating is a contact less joining technique that can be used to join non-conductive thermoplastic composite sheets with the help of susceptor sheet. The susceptor sheet not only gives better
4221-2 ELECTROINDUCED SHAPE MEMORY POLYMER COMPOSITES INCORPORATED WITH CARBON FIBER FELT Xiaobo Gong (Harbin Institute of Technology), Yanju Liu (Harbin Institute of Technology), Liwu Liu (Harbin Institute of Technology), Jinsong Leng (Harbin Institute of Technology)
The paper describes damage development under cyclic fatigue in metal I-beams strengthened with composite patches. Damage is monitored with embedded optical fibers.
In this paper, fatigue lifetime prediction of NREL 5MW reference wind turbine is presented. The fatigue response of selected blade cross sections was obtained by applying macroscopic fatigue models.
81
Scientific programme · Thursday 23 July Congress Hall A 12:00 4201-2 OVERJACKETING EXTRUSION OF UHMWPE MULTI-FILAMENT FIBER FOR THE DEVELOPMENT OF ULTRA-LIGHT, FULLY-THERMOPLASTIC COMPOSITES A. Andres Leal (Empa-Swiss Federal Laboratories for Materials Science and Technolgy), Kathrin Häfliger (Empa-Swiss Federal Laboratories for Materials Science and Technology), Joshi Veeramachaneni (EmpaSwiss Federal Laboratories for Materials Science and Technology), Rudolf Hufenus (Empa-Swiss Federal Laboratories for Materials Science and Technology) A novel approach for the development of ultra-light, fully-thermoplastic fiber reinforced composites is presented. The composite has a fiber volume fraction of 0.54 and a density of 0.93 g/c^cm3.
82
Auditorium 15 4202-3 VOLUMETRIC COMPOSITION OF NANOCOMPOSITES Bo Madsen (Technical University of Denmark), Hans Lilholt (Technical University of Denmark), Juha Mannila (VTT Technical Research Centre of Finland), Rangika Thilan De Silva (Monash University), Pooria Pasbakhsh (Monash University)
Auditorium 10 4203-3 WAVE PROPAGATION IN MULTILAYER STRUCTURES AND ADVANCED STRUCTURAL THEORIES Serge Abrate (Southern Illinois University), Roberta Massabo (Unversity of Genova)
Auditorium 11 4204-3 CARBON FIBRE REINFORCED POLYMER WITH A DISCRETE AND INTEGRATED SELF-HEALING FUNCTION Patryk Jarzynka (University of Bristol ), Ian Bond (University of Bristol ), Duncan Wass (University of Bristol ), Richard Trask (University of Bristol)
Auditorium 12 4205-3 ANISOTROPIC COUPLING EFFECTS USED IN AN ALL-NEW SHAFT/ HUB-JOINT FOR PRINTING APPLICATIONS MADE OF REINFORCED PLASTICS Joerg Kaufmann (Technische Universität Chemnitz), Lothar Kroll (Technische Universität Chemnitz), Lutz Engisch (HTWK Leipzig)
Meeting room 18 4206-2 IN-LINE MONITORING AND NUMERICAL VERIFICATION OF RESIN TRANSFER MOULDING PROCESS WITH CYCOM® 890 RTM RESIN SYSTEM Cristian Lira (The National Composites Centre), Miroslav Stojkovic (The National Composites Centre), Josh Simpson (The National Composites Centre), Kevin Potter (University of Bristol), George Maistros (ADVISE)
Meeting room 19 4207-3 FATIGUE OF GLASS FIBERS REINFORCED POLYAMIDES: MEAN STRESS EFFECTS AS A FUNCTION OF GLASS FIBERS ORIENTATION Gilles Robert (Solvay Engineering Plastics), Olivier Moulinjeune (Solvay Engineering Plastics), Michel Houba (Solvay R&I center Brussels)
Meeting room 20 4208-3 A CHECKLIST FOR THE DESCRIPTION OF NATURAL (BAST) FIBRE REINFORCED COMPOSITES John Summerscales (University of Plymouth), Antoine Le Duigou (University of South Brittany), Christophe Baley (University of South Brittany)
Meeting room 17 4209-3 AUTOCLAVE INFUSION OF AEROSPACE RIBS BASED ON PROCESS MONITORING AND CONTROL BY ULTRASOUND SENSORS Nico Liebers (DLR), Markus Kleineberg (DLR)
Meeting room 16 4210-3 DISTINGUISHING BETWEEN STRAIN MEASUREMENT PROCEDURES DURING COMPRESSIVE TESTING OF FOAM MATERIALS Moeen S Rajput (Kungliga Tekniska Högskolan), Magnus Ultrasonic process monitoring Burman (Kungliga Tekniska The dynamics laminated of an autoclave based infusion Högskolan), Stefan Hallström structures with relative motion with a network of 24 low cost (Kungliga Tekniska Högskolan) in the tangential and normal A fully integrated microcapThis paper proposes a check- sensors. Resin flow, laminate directions at the interfaces is sule – catalyst self-healing Based on analytical analysis, This study is focused on mean list for data which should thickness and cure evlolution The out-of-plane compressive A methodology for the deter- studied using a wave propa- systems is demonstrated and a complex FE-analysis and stress effects observed on be included in any future were monitored and fed into properties of foam materials mination and analysis of the gation approach. evaluated for mode I recovery comprehensive experimental short glass fibers reinforced bio-composites publications, the process control. are investigated using difvolumetric composition of in a high performance CFRP studies an all-new FRP graPA6.6. They have been stud- albeit with the recognition that ferent test methodologies. A nanocomposites is presented, composite. vure printing system was de- The paper describes and ied on several glass fibers ori- it may not always be possible recommendation on strain using cellulose/epoxy and veloped that is now available demonstrates the effectiveentation with great attention to provide every item. measurements for foam ness of simulation technology paid to thermal effects. aluminosilicate/polylactate in the printing market. core compression testing is nanocomposites as case applied to the Resin Transfer proposed. Moulding (RTM) manufacturmaterials. ing process using in-line dielectric sensors for validation.
Thursday 23 July · Scientific Meeting room 5 4211-2 HARNESSING BIOMIMETIC CATCH BONDS TO CREATE MECHANICALLY ROBUST NANOPARTICLE NETWORKS Anna Balazs (University of Pittsburgh)
Meeting room 6 4212-3 ON THE THERMO CYCLING OF FIBER METAL LAMINATES Bernhard Müller (Delft University of Technology), Sofia Teixeira De Freitas (Delft University of Technology), Jos Sinke (Delft University of Technology)
Meeting room 7 4213-3 EFFECT OF BASALT FIBRE HYBRIDIZATION ON HIGH VELOCITY IMPACT BEHAVIOUR OF CARBON/ EPOXY COMPOSITES Jacopo Tirillò (La Sapienza University of Rome), Fabrizio Sarasini (La Sapienza University of Rome), Luca Using computer simulaFerrante (La Sapienza tions, we investigate the The design of a thermal University of Rome), Teodoro mechanical properties of a cycling setup is presented Valente (La Sapienza network of polymer-grafted and discussed which allows University of Rome), Luca nanoparticles (PGNs) that the thermal cycling of fiber Lampani (La Sapienza are interlinked by labile metal laminates with and University of Rome), Enrique “catch” bonds. Unlike “slip” without embedded heater Barbero (Universidad bonds, the life ti elements. First results are Carlos III de Madrid), Sonia presented. Sanchez (Universidad Carlos III de Madrid), Paolo Gaudenzi (La Sapienza University of Rome) The positive role of basalt fibre hybridization on carbon/ epoxy laminates subjected to high velocity impacts is confirmed by experimental data and analytical method.
M1 4214-3 MANUFACTURING AND TESTING OF A CRUCIFORM SPECIMEN FOR BIAXIAL TRANSVERSE TESTS Federico París (University of Seville), Elena Correa (University of Seville), Alberto Barroso (University of Seville), Serafín Sánchez (University of Seville) This study deals with the manufacturing of cruciform coupons to be tested under tensile biaxial transverse loads. The manufacturing process and the results of checking transverse tests are presented.
M2 4215-3 INTER- AND INTRA-LAMINAR DYNAMIC FRACTURE OF CFRPS WITH AND WITHOUT CNT MODIFICATION OF EPOXY: AN EXPERIMENTAL STUDY Hareesh Tippur (Auburn University), Robert Bedsole (Auburn University)
M3 4216-3 EXPRESS PROCEDURE FOR EVALUATION OF DURABILITY OF COMPLEX SHAPE PULTRUDED COMPOSITE PROFILES Andrey Aniskevich (Institute of Polymer MechanicsUniversity of Latvia), Vladimir Kulakov (Institute Mode-I inter- and intra-lam- of Polymer Mechanicsinar dynamic fracture University of Latvia) behaviors of carbon fiber reinforced plastics (CFRPs) Analytical express procedure have been studied. Thick for evaluation of durability unidirectional composites of complex shape pultruded were processed using neat composite profiles and and carbon nanotube reinforcing rods subjected to aggressive environmental factors is development.
M4 4217-3 VISCOELASTIC ANALYSIS OF PROCESSINDUCED STRESSES IN MANUFACTURING OF THERMOPLASTIC COMPOSITES BY AUTOMATED FIBER PLACEMENT TECHNOLOGY Hossein Ghayoor (Concordia University), Suong V. Hoa (Concordia University)
M5 4218-2 MICROSTRUCTURESENSITIVE ENVIROMECHANICAL RESPONSE CHARACTERIZATION AND SIMULATION IN SIC/ SIC CERAMIC MATRIX COMPOSITES Craig Przybyla (Air Force Research Laboratory), Stephan Bricker (University of Dayton), Jeff Simmons A model for the develop(Air Force Research ment of stresses (consider- Laboratory), Russell Hardie ing both stress generation (University of Dayton), and relaxation) arising dur- Michael Uchic (Air Force ing the processing of ther- Research Laboratory), moplastic composites using Ramanathan Krishnamurthy automated fiber placement (UES-Inc.), Pavel Mogilevsky is presented. (UES-Inc.), Michael Braginsky (University of Dayton Research Institute), Travis Whitlow (Universal Technology Corporation), Triplicane Parthasarathy (UES-Inc.), Nick Engel (Southwest Ohio Council for Higher Education (SOCHE)), Eric Jones (Air Force Research Laboratory), Randy Hay (Air Force Research Laboratory), Jennifer Pierce (University of Dayton Research Institute), Larry Zawada (Air Force Research Laboratory)
M6 4219-3 EFFECT OF TRAILING EDGE DAMAGE ON FULL-SCALE WIND TURBINE BLADE FAILURE Philipp Ulrich Haselbach (Technical University of Denmark), Kim Branner (Technical University of Denmark)
M7 4220-3 MONITORING THE MANUFACTURING PROCESS AND THE MECHANICAL PERFORMANCE OF A FULL-SIZED AIRCRAFT TAILCONE ASSEMBLY MADE FROM ALLCOMPOSITE MATERIAL USING EMBEDDED FIBRE Numerically applied fracture OPTIC SENSORS mechanics approaches Edmon Chehura (Cranfield were used to investigate the University), Stephen James effect of trailing edge failure (Cranfield University), on full-scale wind turbine Stephen Staines (Cranfield blade failure under comUniversity), Chris bined loading condition. Groenendijk (National Aerospace Laboratory (NLR)), Denis Cartie (Coriolis Composites Technologies SAS), Stephanie Portet (DAHER Aerospace), Michael Hugon (DAHER Aerospace), Ralph Tatam (Cranfield University)
programme M8 4221-3 FABRICATION AND FINITE ELEMENT ANALYSIS OF SMART MANDREL BASED ON SHAPE MEMORY POLYMER Liwu Liu (Harbin Institute of Technology), Haiyang Du (Harbin Institute of Technology), Fanlong Chen (Harbin Institute of Technology), Yanju Liu (Harbin Institute of Technology), Jinsong Leng (Harbin Institute of Technology)
Monitoring the manufacturing process and the mechanical performance of a full-sized all carbon fibre composite aircraft tailcone assembly using embedded fibre optic sensors
This study seeks to understand the influence of microstructure on the response in SiC/SiC ceramic matrix composites through various enviro-mechanical damage models with experimental validation.
83
Scientific programme · Thursday 23 July Congress Hall A Auditorium 15 12:20 4201-3 INVESTIGATION OF DEFORMATION BEHAVIOUR IN PRESS FORMING OF SADDLE SHAPE U BEAM USING CFRTP LAMINATE AND SHEAR CUTTING BEHAVIOUR Daichi Tatsuno (Kanazawa University), Takeshi Yoneyama (Kanazawa University), Shoji Hineno (Kanazawa University), Masaki Kimura (Kanazawa University), Keisuke Shiozaki (Kanazawa University), Kiichirou Kawamoto (Komatsu Industries Corp.), Masaya Nakagawa (Komatsu Industries Corp.), Masayuki Okamoto (Komatsu Industries Corp.) The continuous CFRTP sheet was press-formed into a U beam shape and the fibre deformation was analysed. In addition, shear cutting of CFRTP was preformed, and shear cutting behaviour was analysed.
12:40 4201-4 MANUFACTURING METHOD OF A THERMOPLASTIC SEMIFINISHED PRODUCT AS REINFORCEMENT IN LAMINATE THICKNESS DIRECTION Andreas Mierzwa (Technische Universität München-Faculty of Mechanical Engineering), Christoph Ebel (Technische Universität München-Faculty of Mechanical Engineering), Michael Brand (Technische Universität München-Faculty of Mechanical Engineering), Klaus Drechsler (Technische Universität München-Faculty of Mechanical Engineering)
Auditorium 10 4203-4 DETERMINE INTERIOR STRAIN FIELDS IN COMPOSITES USING A 3D DIGITAL SPECKLE PHOTOGRAPHY TECHNIQUE Fu-Pen Chiang (Stony Brook University), Lingtao Mao (China University of Mining & Technology( Beijing))
Auditorium 11 4204-4 BIOINSPIRED MICROVASCULAR NETWORKS FOR MULTIFUNCTIONAL COMPOSITES Jason Patrick (University of Illinois at Urbana-Champaign), Brett Krull (University of Illinois at Urbana-Champaign), Mayank Garg (University of The 3D deformation field of Illinois at Urbana-Champaign), a composite beam under Jeffrey Moore (University of three-point bending has been Illinois at Urbana-Champaign), mapped using the newly Nancy Sottos (University of developed technique called Illinois at Urbana-Champaign), Digital Volumetric Speckle Scott White (University of Photography combined with Illinois at Urbana-Champaign) X-ray CT Advancements in a vascularization technique for fiber-composites are provided as a pathway to imbue these synthetic, structural materials with multifunctional attributes found in biological systems.
4203-5 INFLUENCE OF MONTMORILLONITE NANOCLAY, GRAPHENE NANOPLATELETS AND COMBINED NANOCLAY/ GRAPHENE HYBRID ON PROPERTIES OF EPOXY COMPOSITE Alfred Tcherbi-Narteh (Tuskegee University), Md. Nuruddin (Tuskegee University), Mahesh Hosur (Tuskegee University), Raju Gupta (Tuskegee University), Allyson Lattimore (Tuskegee University), Shaik Jeelani (Tuskegee University) Influence of montmorillonite nanoclay, graphene nanoplatelets and combined binary nanoparticles of the two on flexural, viscoelastic and thermal properties of epoxy SC780 composites was investigated.
4204-5 THERMALLY ACTIVATED HEALING IN HIGH PERFORMANCE CARBON FIBRE/EPOXY COMPOSITES Khomkrit Pingkarawat (RMIT University), Mel Dell’olio (Commonwealth Scientific and Industrial Research Organisation (CSIRO)), Adrian Mouritz (RMIT University), Russell Varley (Commonwealth Scientific and Industrial Research Organisation (CSIRO)) Investigation of thermally activated healing in high performance carbon fibre/epoxy composites using poly(ethylene-co-methacylic acid) (EMAA) as a thermoplastic healing agent
Auditorium 12 4205-4 ANALYSIS OF CARBON FIBER COMPOSITE COIL/RINGS FOR OFFLOADING HOSES SUBJECTED TO CRUSHING LOAD Maikson Luiz Passaia Tonatto (Federal University of Rio Grande do Sul), Maria Madalena de Camargo Forte (Federal University of Rio Grande do Sul), Ricardo Araújo Teles (PETROBRAS), Sandro Campos Amico (Federal University of Rio Grande do Sul)
Meeting room 18 4206-3 CHARACTERISATION OF PREPREG TACK ON DIFFERENT SURFACES TO AID AUTOMATED MATERIAL PLACEMENT Andreas Endruweit (University of Nottingham), Davide De Focatiis (University of Nottingham), Sayata Ghose (The Boeing Company), Brice Johnson (The Boeing Company), Douglas Younkin (The Boeing Company), Nicholas Warrior (University of Nottingham)
Meeting room 19 4207-4 INFLUENCE OF THE SERVICE ENVIRONMENT ON THE MATERIAL PROPERTIES OF SHORT- AND ENDLESSFIBER REINFORCED THERMOPLASTICS Constantin Bauer (Institute for Composite Materials), Magin Michael (Institute for Composite Materials), Thomas Schalk (ZF Friedrichshafen AG)
4206-4 DETECTION AND MODELLING OF THERMAL AND RHEOLOGICAL TRANSITIONS OF A 2-STAGE THERMOSET USING DIELECTRIC AND STANDARD MEASURING TECHNIQUES Alexander Chaloupka (Fraunhofer Institute for Chemical Technology ICT), Renato Bezerra (Fraunhofer Institute for Chemical Technology ICT), André Wedel (Fraunhofer Institute for Chemical Technology ICT), Vinay Madaksira (Fraunhofer Institute for Chemical Technology ICT)
4207-5 EFFECT OF FIBRE ORIENTATION AND NOTCH RADIUS ON THE IMPACT BEHAVIOUR OF SHORT GLASS FIBRE REINFORCED POLYPROPYLENE Michael Jerabek (Borealis Polyolefine GmbH), Anna Hartl (Johannes Kepler University Linz), Reinhold Lang (Johannes Kepler University Linz)
The influence of different thawing salt solutions on the static and fatigue properties Prepreg tack on steel, preof SFRP and the effect of difThis study aims to investigate preg and FEP surfaces was ferent conditioning methods the substitution of the coil characterised experimentally. on the tensile strength of steel of offloading hoses Employing time-temperature EFRP is investigated. for composite materials. superposition allowed the The composite coil showed feed rates for maximum tack specific stiffness and strength at any temperature to be higher than that of the steel. predicted.
Dielectric measurement The paper presents a manresults show a strong correufacturing method for a stalation to differential scanning ple-like pin made of carbon calorimetric data. Because of fiber reinforced thermoplastic physical principles there is a for reinforcing laminates in connection between dielectric thickness direction and rheology, too. 13:00 Lunch in the Exhibition 14:00 Stimulus-responsive polymer composites: a path towards active shape changing structures Jinsong Leng, Harbin Institute of Technology, People’s Republic of China
84
Meeting room 20 4208-4 HIGH PERFORMANCE COMPOSITES BASED ON NANOPAPERS Andreas Mautner (University of Vienna), Jessica Lucenius (Aalto University), Monika Österberg (Aalto University), Alexander Bismarck (University of Vienna) A new type of nanopapers was developed by introducing polysaccharides into the matrix of a CNF film. These nanopapers were processed into high-loading composites via lamination with an epoxy-resin.
Meeting room 17 4209-4 SIMULATION OF MOLD FILLING IN RESIN TRANSFER MOLDING CONSIDERING THE LOCAL FIBER ARCHITECTURE AFTER THE PREFORMING PROCESS Dino Magagnato (Karlsruhe Institute of Technology), Frank Henning (Karlsruhe Institute of Technology)
Meeting room 16 4210-4 BONDED REPAIRS OF HONEYCOMB SANDWICH STRUCTURES: IN SITU PROCESS MONITORING AND QUALITY ASSESSMENT Mathieu Préau (McGill University), Pascal Hubert (McGill University)
A modified adhesive is used for bonded scarf repairs of sandwich panels. Air channels A special interface between in the adhesive is found to draping simulation and mold significantly reduce repair filling simulation is developed patch and bondline porosto improve the modelling of ity under vacuum bag only resin transfer molding. The pressure interface is designated for unidirectional fabrics.
4210-5 THE MECHANICAL PROPERTIES OF SANDWICH STRUCTURES BASED WITH COMPOSITE COLUMN CORES H. Z. Jishi (Khalifa University of Science-Technology and Research (KUSTAR)), R. Umer (Khalifa University of ScienceTechnology and Research (KUSTAR)), Z. Barsoum (Khalifa University of ScienceTechnology and Research (KUSTAR)), W. J. Cantwell (Khalifa University of ScienceTechnology and Research (KUSTAR)) Composite sandwich structures containing high-performance core materials based on vertical composite columns have been manufactured using a lost-mold technique.
Thursday 23 July · Scientific Meeting room 5 4211-3 STRUCTURAL MAGNETIC COMPOSITES FOR USE IN ELECTROMECHANICAL APPLICATIONS Laura E. Edwards (University of Bristol), Jason M. Yon (University of Bristol), Ian P. Bond (University of Bristol), Phil H. Mellor (University of Bristol)
Meeting room 6 4212-4 FABRICATION OF TIAL MATRIX COMPOSITE SHEETS WITH CONTROLLED MICRO-LAMINATED ARCHITECTURE BY A SOLID-LIQUID REACTION Xiping Cui (Harbin Institute of Technology), Lin Geng (Harbin Institute of Technology), Guohua Fan (Harbin Institute of Technology), Yuanyuan Gao (Harbin Institute of Technology), Songhe Meng (Harbin Institute of Technology)
A fibre reinforced polymer composite laminate with both magnetic and mechanical functionality was developed. Particle-resin films were incorporated as a means of increasing mag- TiB-TiAl composites prenetic permeability. pared by foil metallurgy sintering display unique multi-layered structure and enhanced tensile properties and thus have potential for high-temperature structural applications.
4211-4 MECHANICAL AND THERMAL PROPERTIES OF HEAT GENERATED COMPOSITE BOARD MADE OF WASTE OF CARBON FIBER Teruo Kimura (Kyoto Institute of Technology), Masaki Yoshida (Kyoto Institute of Technology), Naoya Kurahashi (Kyoto Prefectural Institute for Northen Industry), Katsunori Osako (L&R Corporation)
4212-5 TENSILE PROPERTIES OF AN INFILTRATED INTERPENETRATING POROUS SIC MMC Matthias Merzkirch (KIT), Volker Walter (KIT), Kay André Weidenmann (KIT)
Meeting room 7 4213-4 INTRALAYER HYBRIDISATION TO COMBINE THE DUCTILITY OF SELF-REINFORCED POLYPROPYLENE WITH THE STIFFNESS OF CARBON FIBRE Yentl Swolfs (KU Leuven), Larissa Gorbatikh (KU Leuven), Ignaas Verpoest (KU Leuven)
M1 4214-4 INDUCING FAILURES IN COMPOSITE FLYWHEELS- A STUDY USING 3 & 4 POINT BENDING Jennifer Lenz (Imperial College London), Bamber Blackman (Imperial College London)
Composite beam specimens with no defects and with inCarbon fibre/self-reinforced serted defects of transverse polypropylene hybrids or inter-laminar nature were achieved a unique combina- tested to failure in 3-point tion of stiffness and failure bending and modeled using strain. The tensile, flexural finite element analysis. and impact behaviour revealed the importance of bonding.
4213-5 EXPERIMENTAL CHARACTERIZATION OF HYBRID MATERIAL SYSTEMS CONSISTING OF SHEET METAL AND ADVANCED COMPOSITES Michael Dlugosch (Fraunhofer Ernst-MachInstitute-EMI), Dirk The current paper deals Lukaszewicz (BMW Group), with the producibility of SiC Jens Fritsch (Fraunhofer preforms and their infiltra- Ernst-Mach-Institutetion. In addition it could be EMI), Stefan Hiermaier shown that tensile sample (Fraunhofer Ernst-Machcan be manufactured in Institute-EMI) The high-strength/lightminiature dimensions. weight composite reinforced Hybrid coupon specimens by waste carbon fiber was comprised of sheet metal tried to mold by extruding and cfrp/gfrp have been molding method. The tested under quasistatic mechanical properties of tension and 3-point-bending composite heated by carbon to study the effects of major fiber were discussed. design parameters and hybrid mechanisms
M2 4215-4 INNOVATIVE METHODOLOGY BY USING DIC TO IDENTIFY INTRALAMINAR DAMAGE ON CFRP WITHIN AN INDUSTRIAL CONTEXT Nicolas SWIERGIEL (AIRBUS GROUP INNOVATIONS), Benjamin LEBOIME (AIRBUS GROUP INNOVATIONS), Ana Cristina GALUCIO (AIRBUS GROUP INNOVATIONS), François HILD (LMT Cachan), Caroline PETIOT (AIRBUS GROUP INNOVATIONS), Stéphane ROUX (LMT Cachan), Prisca VINCENT (AIRBUS GROUP INNOVATIONS)
M3 4216-4 DURABILITY OF CARBON EPOXY COMPOSITES MATERIAL FOR TIDAL TURBINE BLADE APPLICATIONS. Nicolas Tual (LBMS), Nicolas Carrere (LBMS), Peter Davies (Ifremer) Results from mechanical tests after seawater ageing and a diffusion model to account for water ingress are presented. These are used to estimate long term behaviour of a tidal turbine blade.
For quantifying transverse cracking in layered composites, global Digital Image Correlation (DIC) is applied during tensile tests. 2 trustworthy methodologies are proposed for use at industrial level.
4214-5 GEOMETRY DEFINITION FOR THE NORMAL AND SHEAR STRENGTH OF BIMATERIALS USING THE IOSIPESCU SPECIMEN WITHOUT STRESS SINGULARITIES. Alberto Barroso (University of Seville), Alberto Martín (University of Seville), Vladislav Mantic (University of Seville), Federico París (University of Seville) Modified tensile and Iosipescu test samples of bimaterial joints with composites are proposed to evaluate the tensile and shear strength removing the stress singularities at the interface free-edges.
M4 4217-4 MANUFACTURING CHARACTERISTICS OF THE CONTINUOUS MULTI-TOW SHEARING FOR HIGHVOLUME MANUFACTURING OF TOW-STEERED COMPOSITES Evangelos Zympeloudis (University of Bristol), Byung Chul Kim (University of Bristol)
M5 4218-3 PROGRESSIVE FAILURE ANALYSIS OF THE OPEN-HOLE COMPOSITES LAMINATES USING SFEM METHOD AND TEST VALIDATION Xiuhua Chen (Shanghai Jiao Tong University), Yin Yu (Shanghai Jiao Tong University), Hai Wang (Shanghai Jiao Tong University), Jian The concept of CMTS offers Zhao (Shanghai Jiao Tong the potential to dramatically University) increase fibre steering capabilities by utilising the The example of the openmaterial shear deformation, hole composite plates well while enhancing productivity proves that the proposed by employing multiple tows. methodology based on SFEM significantly reduces modeling difficulty and computational memory usage.
M6 M7 4219-4 MATERIAL DESIGN AND RELIABILITY OF ADVANCED COMPOSITE MATERIALS Jens Zangenberg (LM Wind Power), Torben Jacobsen (LM Wind Power), Rasmus Østergaard (LM Wind Power), Michael Koefoed (LM Wind Power) The design and reliability aspects of glass fibres and non-crimp fabrics used for the main load-carrying beam of a wind turbine rotor blade are addressed.
programme M8 4221-4 NANOSTRUCTURED ‘SKIN’ FOR MECHANICAL SENSING Yinhu Deng (Leibniz - Institut für Polymerforschung Dresden e.V.), Jianwen Liu (Leibniz - Institut für Polymerforschung Dresden e.V.), Edith Mäder (Leibniz - Institut für Polymerforschung Dresden e.V.), Gert Heinrich (Leibniz - Institut für Polymerforschung Dresden e.V.), Christina Scheffler (Leibniz - Institut für Polymerforschung Dresden e.V.), Uwe Gohs (Leibniz - Institut für Polymerforschung Dresden e.V.), Shanglin Gao (Leibniz - Institut für Polymerforschung Dresden e.V.) An integration of optic performance and piezoresistive behaviour on glass fibres to realise strain sensor for traditional fibre reinforcement composites.
4216-5 FINITE ELEMENT MODEL OF GALVANIC CORROSION IN A POLYMER COMPOSITE CORE CONDUCTOR Eva Hakansson (University of Denver), Paul Predecki (University of Denver), Maciej Kumosa (University of Denver)
4217-5 THERMOPLASTIC MATRIX COMPOSITES: XTRA COMPLEX, XTRA QUICK, XTRA EFFICIENT MANUFACTURING ADVANCED COMPOSITES FOR THE A350 XWB AND BEYOND Angelos Miaris (Premium AEROTEC GmbH), Klaus Edelmann (Premium A numerical model of the AEROTEC GmbH), Sven atmospheric galvanic corSperling (Premium AEROTEC rosion between carbon fiber GmbH) reinforced composite and aluminium in new design of Premium AEROTEC manan overhead transmission ufactures in a highly autoline conductor. mated facility in Bremen 5000 CFRP –Parts for every A350 XWB. Quality, costs and on time delivery are the major key issues for the sucess of the projekt.
4219-5 MULTI-AXIAL SUB-STRUCTURE FATIGUE TESTING OF A 34M WIND TURBINE BLADE Jacob Waldbjørn (Technical University of Denmark), Christian Berggreen (Technical University of Denmark), Henrik Stang (Technical University of Denmark)
85
Scientific programme · Thursday 23 July Congress Hall A 15:00 4301 Processing Manufacturing Technology 12 15:00 4301-1 APPLICATION OF WATERJET WITHOUT ABRASIVES TO SURFACE TREATMENT OF CFRP Hirohito Hira (Daido University), Tomoyuki SUZUKI (Kyoto Institute of technology)
Auditorium 15 4302 Nano Composites 12
4302-1 MECHANICAL PROPERTIES OF CARBON NANOTUBE /EPOXY COMPOSITE LAMINATES PROCESSED USING PREPREG METHOD Toshio Ogasawara (JAXA), Sook-Young Moon (JAXA), Application of fan shape Takeshi Ogawa (Aoyamawaterjet to the pretreatment Gakuin University), Yoshinobu of painting and repair of CFRP Shimamura (Shizuoka was studied. Good results University), Yoku Inoue were obtained for painting of (Shizuoka University) PA66 matrix CFRP and for repair of epoxy matrix CFRP. This study examined the processing and mechanical properties of aligned MW-CNT /epoxy lamina and laminates processed using a hot-melt prepreg method. On-axis and off-axis tensile tests (0°, 45°, 90°)
Auditorium 10 4303 ONR Special Symposium on Marine Composites 7
Auditorium 11 4304 Multifunctional Composites - Self-Healing and Bio-inspired Designs 3
4303-1 STATISTICAL PREDICTION OF TENSILE CREEP FAILURE TIME FOR UNIDIRECTIONAL CFRP Masayuki Nakada (Kanazawa Institute of Technology), Yasushi Miyano (Kanazawa Institute of Technology)
4304-1 EFFECT OF LOW TEMPERATURE ON SELF HEALING PERFORMANCE OF CARBON/EPOXY COMPOSITES Mohammad Asgar Khan (Concordia University), Suong Van Hoa (Concordia University)
Auditorium 12 4305 Applications - Bio & Medical 2
Meeting room 19 4307 Short Fibre Composites 3
4306-1 INTEREST OF A RHEOKINETIC STUDY FOR THE DEVELOPMENT OF THERMOPLASTIC COMPOSITES BY THERMOPLASTIC - RESIN TRANSFER MOLDING Matthieu Thomassey (CetimCermat), Dimitri LERAY (Cetim-Cermat), Frédéric RUCH (Cetim-Cermat), Julia SCHELL (Cetim), Michel BOUQUEY (Institut Charles Sadron)
4307-1 FAST PREDICTION OF THE FATIGUE BEHAVIOR OF SHORT FIBER REINFORCED THERMOPLASTICS FROM HEAT BUILD-UP MEASUREMENTS: FROM THE SAMPLE TO THE STRUCTURE Leonell Serrano Abello (LBMS), Yann Marco (LBMS), Vincent Le Saux (LBMS), Pierre Charrier (TrelleborgVibracoustic), Gilles Robert (Solvay engineering plastics)
Meeting room 20 4308 Biocomposites 11
4308-1 STRUCTURAL, MORPHOLOGICAL AND MICROMECHANICAL CHARACTERIZATION OF GELATIN-BACTERIAL CELLULOSE COMPOSITES Franck Quero (Universidad de los Andes), Abigail Coveney (University of Bristol), Anna Lewandowska (University of Exeter), Robert Richardson (University of Bristol), Paulo Díaz Calderón (Universidad de los Andes), Ashraf Alam (University of Bristol), KoonTo a better control of T-RTM This paper aims at describing Yang Lee (University College injection process, a rheolog- a method based on thermal London), Stephen Eichhorn ical, physical and chemical measurements that reduces (University of Exeter), Javier study of the different phenom- substantially the characteri- Enrione (Universidad de los enons is proposed. This study zation duration of the fatigue Andes) is completed with a numerical properties for two families of simulation of injections. samples The effect of adding bacterial cellulose (BC) to gelatin was investigated. The results showed that by adding 10 wt.% UV opacity was increased by ~40 %, compared to gelatin. 4302-2 NOVEL STIFF 4303-2 EXPERIMENTAL 4304-2 EFFECT OF 4305-2 THE ATTACHMENT 4306-2 DEVELOPMENT OF 4307-2 SHORT FIBRE 4308-2 SUSTAINABLE 15:20 4301-2 ABRASIVE VIBRATIONS-BASED WATERJET MACHINING AEROGEL-AEROGEL EMBEDDED CATALYTIC OF TENDON TO BONE: IMPROVED METHODS FOR POLYAMIDE UNDER COMPOSITES FROM OF SMALL FEATURES IN COMPOSITES FOR THERMAL CHARACTERIZATION SELF-HEALING ON CARBON STRATEGIES FOR CHARACTERISING THE CURE COMBINED SHEAR AND BIOCHAR AND ENGINEERING COMPOSITE MATERIALS INSULATION APPLICATION OF A COMPOSITE FIBRE REINFORCED MECHANICALLY ROBUST OF COMPOSITE MATERIALS TENSILE LOADING: A NON- PLASTIC Jeff Schwartzentruber Jessica Laskowski (German STIFFENED CURVED PANEL POLYMER COMPOSITES CONNECTIONS BETWEEN Ana Yong (National Physical DESTRUCTIVE EVALUATION Amar Mohanty (University (Ryerson University), Marcello Aerospace Center (DLR)), MANUFACTURED AS ONE Daniel Everitt (University of DISSIMILAR MATERIALS Laboratory), Graham Sims OF MICRO DAMAGE of Guelph), Singaravelu PIECE FOR THE HULL OF A Papini (Ryerson University), Barbara Milow (German Bristol), Ian Bond (University Stavros Thomopoulos (National Physical Laboratory), EVOLUTION Vivekanandhan (VHNSN FAST BOAT Jan Spelt (University of Aerospace Center (DLR)), of Bristol), Duncan Wass (Washington University) Paul Smith (University Karoline Metzkes (BAM College), Andrew Anstey Toronto) Lorenz Ratke (German Ioannis Georgiou (National (University of Bristol), Richard of Surrey), Stephen Ogin Federal Insitute for Materials (University of Guelph), Aerospace Center (DLR)) Technical University of Trask (University of Bristol) The attachment of tendon to (University of Surrey) Research and Testing), Volker Manjusri Misra (University of The research examined the Athens ) bone is a significant mechanTrappe (BAM Federal Insitute Guelph) cut surface morphology of Non-fragile and stiff aeroThe successful inclusion of a ical challenge. Developing The Tg of CFRP materials for Materials Research and three composite materials gel-aerogel composites This work uses few sensors catalytic epoxy curing agent strategies for effectively at four states of cure was Testing) Biochar filled nylon 6 compos(two CFRP and one GFRP) consisting of highly insulating to collect dense space-time within a fibre reinforced connecting the two tissues measured using DMA, DSC ites were fabricated through acceleration databases in using a prototype micro-abra- granular aerogels (silica or polymer is demonstrated. will have significant clinical and TMA by a new method The evolution of micro dam- melt extrusion process. The composite ship structures for Subsequent repair of damsive waterjet nozzle to maRF) and a cellulosic aerogel impact. that aims to eliminate thermal age in short fibre polyamide effect of biochar loading on chine small features. matrix were synthesized and multi-scale damage detection aged FRP specimens is carlag, often cited as a cause of is focus on. Tube samples are their mechanical properties and system identification by ried out using the embedded characterized. disagreement between these subjected to biaxial fatigue was investigated. advanced data processing. catalyst. techniques. loadings. The evolution of micro damage is analysed by X-ray refraction analysis.
86
4305-1 CHARACTERIZATION OF A COMPOSITE MATERIAL TO MIMIC HUMAN CRANIAL BONE Thomas Plaisted (United States Army Research Laboratory), Jared Gardner (United States Army Research Laboratory), Jeffrey Gair A prediction method for the (United States Army Research statistical creep failure time Effect of low temperature on Laboratory), Michael Leadore of polymer composites using self healing of carbon/epoxy (United States Army Research the statistical static strengths composites were investigated Laboratory) of polymer composites meas- in this work. Epoxy incorured at various temperatures porated with microcapsules We report on the characis proposed. containing 5-ethylideneterization of a composite 2-Norbornene (5E2N) and material to mimic the meGrubbs cataly chanical response of human cranial bones and serve as a surrogate for human tissue during testing of protective measures.
Meeting room 18 4306 Experimental Methods for Process Characterisation 4
Meeting room 17 4309 Recycling of Composites and Sustainability 3
Meeting room 16 4310 Fibres 2
4309-1 STRENGTH OF THEMERALLY CONDITIONED GLASS FIBRE: DEGRADATION, RETENTION, AND REGENERATION Liu Yang (University of Strathclyde), Peter Jenkins (University of Strathclyde), John Liggat (University of Strathclyde), James Thomason (University of Strathclyde)
4310-1 MICROSCOPIC INVESTIGATION OF THE MICRO-STRUCTURE OF FIBRILS OF TECHNICAL POLYACRYLNITRILE FIBERS SEPARATED BY ULTRASONIC ETCHING Christina Kunzmann (University of Augsburg), Judith Moosburger-Will (University of Augsburg), Siegfried Horn (University of Augsburg)
The aim of this study is to verify the concept of regenerating thermally degraded glass fibres for a potential closed-loop recycling of glass fibre thermosetting composites.
4309-2 COMPRESSIVE STRENGTH AND MIX BEHAVIOUR OF RUBBERISED CONCRETE Istvan Pocklington (Kingston University London), Hsein Kew (Kingston University London), Ted Donchev (Kingston University London), Mukesh Limbachiya (Kingston University London) Compressive strength reductions as a result of both uniform and variable factors are discussed. Research suggests hydrocarbon contamination of rubber particles as but one of these causes.
Different morphologies of separated fibrils coexist in the same fiber. Based on FESEM, AFM and TEM analysis we derive a model showing the relationship of the microstructures and polymer chain folding.
4310-2 A STUDY ON THE LENGTH EFFECT INFLUENCING THE MECHANICAL STRENGTH OF GLASS FIBRE FILAMENTS Alexander Maier (Processing of composites), Ralf Schledjewski (Processing of composites) In the present work a possible length dependency for dry glass fibre bundles was investigated. These analyses are based on the needs for continuous composites manufacturing processes.
Thursday 23 July · Scientific Meeting room 5 4311 Multifunctional Composites - Adaptive Response and Reconfiguration 4 4311-1 MODELLING OF TEXTILE COMPOSITES WITH VARIABLE STIFFNESS Erik Marklund (Swerea SICOMP AB), Gaurav Vyas (Swerea SICOMP AB), Peter Hellström (Swerea SICOMP AB)
Meeting room 6 4312 Composites with Metallic Components 3
4312-1 STRUCTURE AND PROPERTIES OF THE AK7SIC COMPOSITES AFTER MACHINING Jolanta Cyboron (Institute of Advanced Manufacturing Technology), Małgorzata Karolus (Institute of Advanced Manufacturing Technology), Piotr Putyra In this work the macroscop- (Institute of Advanced ic stiffness response of a Manufacturing Technology), short thermoplastic comMaciej Dyzia (Silesian posite beam during impact University of Technology), at various temperatures is Lucyna Jaworska (Institute evaluated experimentally of Advanced Manufacturing and supported by simuTechnology) lations. The effects of addition silicon carbide on the phase composition, crystallite size, microstructure, residual stress and physical and mechanical properties on aluminum matrix alloy were investigated.
4311-2 ELECTROSTATIC ADHESION FOR ADDED FUNCTIONALITY OF COMPOSITE STRUCTURES Callum Heath (University of Bristol), Ian Bond (University of Bristol), Kevin Potter (University of Bristol)
4312-2 MECHANICAL AND MICROSTRUCTURE EVALUATION OF INSITU TITANIUM MATRIX COMPOSITE PROCESSED BY SEVERE PLASTIC DEFORMATION Weijie Lu (Shanghai Jiao Tong University), An overview of the potenYuanfei Han (Shanghai tial use of Electrostatic Jiao Tong University), adhesion, as a reversible Jiuxiao Li (Shanghai Jiao attachment mechanism, to Tong University), Guangfa introduce variable stiffness Huang (Shanghai Jiao capability into FRP sandwich Tong University), Yuting structures lv (Shanghai Jiao Tong University) In situ synthesized titanium matrix composite with a strongly clustered TiB fibers and TiC particles distribution is successfully subjected to equal channel angular pressing.
programme
Meeting room 7 M1 4313 Hybrid Composites 2 4314 Simulation of Progressive Failure 1
M2 4315 Digital Image Correlation 2
M3 M4 M5 M6 M7 4316 Durability, Creep and 4317 Impact and Dynamic 4318 Multiscale Modelling 4319 Applications - Ships 4320 Thermography 1 Agressive Environment 2 Structural Analysis 1 of Structures 3 and Boats
M8 4321 Multifunctional Composites - Processing and Integration 1
4313-1 NEW MULTIFUNCTIONAL HYBRID POLYMER COMPOSITES REINFORCED BY CARBON AND STEEL FIBERS Benedikt Hannemann (Institute for Composite Materials (IVW GmbH)), Sebastian Backe (University of Kaiserslautern), Sebastian Schmeer (Institute for Composite Materials (IVW GmbH)), Frank Balle (University of Kaiserslautern), Ulf Paul Breuer (Institute for Composite Materials (IVW GmbH))
4315-1 CHARACTERIZING QUASI-STATIC IMPACT EVENTS ON COMPOSITE MATERIALS WITH DIC Bob Desnoo (Carleton University), Calvin Rans (Delft University of Technology), Xiao Huang (Carleton University)
4316-1 DIRECTIONAL DIFFUSION OF MOISTURE IN CARBON FIBRE / EPOXY COMPOSITES: EXPERIMENTS AND MODELLING Feras Korkees (Swansea University), Sue Alston (Swansea University), Cris Arnold (Swansea University)
4321-1 MULTIFUNCTIONAL COMPOSITES REINFORCED WITH FUNCTIONALIZED NANOMATERIALS: INTERPHASE CHARACTERIZATION AND APPLICATIONS Qi An (University of Delaware), Andrew Rider (Defence Science and Technology Organization), Narelle Brack (La Trobe University), Erik Thostenson (University of Delaware)
A carbon and steel fiber reinforced epoxy is investigated. Tests are conducted on coupons with different metal fiber volume fractions to demonstrate the electrical and mechanical material potentials. 4313-2 DURABILITY OF FLAX-BASALT HYBRID COMPOSITES FOR MARINE APPLICATIONS Vincenzo Fiore (University of Palermo), Tommaso Scalici (University of Palermo), Luigi Calabrese (University of Messina), Antonino Valenza (University of Palermo), Giuseppe La Bella (University of Messina) In the present paper a study on the influence of basalt fibre layers on aging durability under salt spray exposition of flax/epoxy laminates is presented
4314-1 A CONTINUUM DAMAGE MECHANICS MODEL FOR UD COMPOSITES WITH THE EVOLUTION LAW BASED ON THE DAMAGE DRIVING FORCE CONCEPT Tianhong Yu (University of Nottingham), Shuguang Li (University of Nottingham), Elena Sitnikova (University of Nottingham)
Directional diffusion of moisture in composites was studied to measure the diffusivity in all directions, and a multi-scale modelling approach was developed to predict these diffusivities.
The present paper is the implementation of previous CDM theory with necessary extension, which further develops the theoretical model for UD composites into a functional material subroutine for FEA.
4314-2 REPRESENTING MATRIX CRACKS THROUGH DECOMPOSITION OF THE DEFORMATION GRADIENT TENSOR IN CONTINUUM DAMAGE MECHANICS METHODS Frank Leone (NASA Langley Research Center) Presentation and demonstration of a new means of tracking matrix crack orientations in continuum damage mechanics material models for use in progressive damage analysis finite element models.
4315-2 IN-PLANE SHEAR PROPERTIES OF CARBON FIBER REINFORCED THERMOPLASTIC COMPOSITES BY USING V-NOTCHED SPECIMEN AND DIGITAL IMAGE CORRELATION Takashi MURAKAMI (Shimadzu Corporation), Tuyoshi MATSUO (Tokyo University) In-plane shear properties of carbon fiber reinforced thermoplastic composites (CFRTP) were investigated by the digital image correlation (DIC) analysis under the V-Notched Rail Shear Method.
4316-2 ESTIMATION OF THE EFFECT THAT SPACE ENVIRONMENT ROAD GIVES IN THERMAL AND MECHANICAL PROPERTY OF CFRP Satomi Asai (Japan Aerospace Exploration Agency ), Ken Goto (Japan Aerospace Exploration Agency), Satoshi Yoneyama (Aoyama Gakuin University), Shuichi Arikawa (Aoyama Gakuin University), Satoshi Kobayashi (Tokyo Metropolitan University) This study searches relation of damage of laminate by thermal cycle and the changes in Young’s modulus and CTE of CFRP laminate by experimental observations.
4317-1 THE SIMULATION OF THE IMPACT TESTS OF COMPOSITE STRUCTURES WITH MIXED ELEMENT TYPE ANALYSIS Weiyi Kong (University of Nottingham), Richard Brooks (University of Nottingham), Shuguang Li (University of Nottingham), Elena Sitnikova (University of Nottingham)
4318-1 A MICROMECHANICAL APPROACH TO MODELING THE EFFECT OF IMPACT INDUCED DAMAGE ON THE VIBRATION RESPONSE OF CFRP LAMINATES Marco A. Pérez (Universitat Politècnica de Catalunya - BarcelonaTech), Lluís Gil (Universitat Politècnica de Catalunya - BarcelonaTech), A mixed finite element type Sergio Oller (Universitat analysis, involving solid, Politècnica de Catalunya thin shell elements and - BarcelonaTech), Carlos their coupling has been de- A. Felippa (Center for velop to reduce the cost of Aerospace Structuresmodelling large composite University of Colorado at structures under impact Boulder) loading, This work deals with modeling the effect of low-velocity impact damage upon the vibration response of CFRP laminates through a micro-mechanical description of the induced internal damage. 4317-2 IMPACT 4318-2 MULTISCALE PERFORMANCE OF MODELING OF LAMINATED COMPOSITE SANDWICH STRUCTURES STRUCTURE UNDER HIGH Roberta Massabo (University VELOCITY IMPACT of Genova), Marco Pelassa Long Yu (Imperial (University of Genova) College London), Iman Mohagheghian (Imperial The influence of interfaCollege London), Bamber cial imperfections on the Blackman (Imperial College dynamic characteristics London), John Dear of multilayered plates is (Imperial College London) studied using a multiscale approach which couples a The energy absorption for single-layer theory and a uniform and graded foam cohesive-crack model. core composite sandwich structures was investigated under low and high velocity impact by using drop-weight tower and gas gun.
4319-1 COMPOSITE HATCH COVER FOR BULK CARRIERS Philippe Noury (DNV GL), Ragnar Hansen (HEAC), Bjørn Høyning (FiReCo)
4320-1 IMPROVEMENT OF DETECTION OF DEFECTS OF CFRP IN THE INFRARED PULSE PHASE THERMOGRAPHY Masashi Koyama (Meisei university), Masashi Strength and fire risk Ishikawa (Tokyo University assessments carried out to of Science), Haruki assess technical, regulatory Kitamura (Tokyo University and economic feasibility of of Science), Hirhoshi GRP composite hatch cover Hatta (Japan Aerospace showed that a GRP design Exploration Agency), Yasuo was feasible and had equiv- Kogo (Tokyo University of alent fire safet Science) Pulse phase thermography (PPT) is one of the infrared thermography techniques. we tried to improve of detection of defect in the concrete structures using PPT with the heating by the halogen lamp.
4319-2 EFFECT OF FLEXIBILITY ON THE PERFORMANCE OF POLYMERIC FOAMS IN SANDWICH CONSTRUCTION HULL PANELLING UNDER SLAMMING LOADS Tom Allen (Unviersity of Auckland), Mark Battley (University of Auckland) This paper explores experimentally how the stress state in polymeric foam cores varies as a result of flexibility in hull paneling during water impacts.
This research based on a novel processing technique to hybridize carbon nanotubes with advanced fibers to prepare multifunctional composites, with focusing on characterizing interphases.
4320-2 MONITORING AND REPAIR TECHNIQUE FOR INTERFACIAL DEBONDING IN CARBON FIBER REINFORCED THERMOPLASTICS BY MEANS OF INDUCTION HEATING Takushi Miyake (Gifu University), Kazuya TAKENAKA (Gifu University)
4321-2 THREEDIMENSIONAL PRINTING OF POLYVINYLIDENE FLUORIDEBARIUM TITANATE NANOCOMPOSITE SENSORS Sampada Bodkhe (Ecole Polytechnique de Montreal), Daniel Therriault (Ecole Polytechnique de Montreal), Frederick Gosselin (Ecole A novel method for monitor- Polytechnique de Montreal) ing and repair the interfacial debonding in injection mold- A novel fabrication approach ed CFRTP parts was proto create 3D piezoelectric posed with MHz-frequency polyvinylidene fluoride induction heating which (PVDF) – barium titanate enable to heat carbon fibers (BaTiO3) nanocomposite very rapidly. sensors by solvent-cast 3D printing is presented.
87
Scientific programme · Thursday 23 July Congress Hall A 15:40 4301-3 EFFECT OF TEMPERATURE AND CLEARANCE ON SHEAR CUTTING BEHAVIORS IN CFRP LAMINATES Keiji Ogi (Ehime University), Shigeki Yashiro (Shizuoka University)
Auditorium 15 Auditorium 10 4302-3 PREPARATION AND PROPERTIES OF CNTS WEB/ EXOXY COMPOSITES Lulu Shen (Tongji University), Ling Liu (Tongji University)
In the present study, the carbon nanotube (CNT) buckypapers (BPs) were prepared by The purpose of the present positive pressure filtering prostudy is to optimize the shear cess and then were infiltrated cutting conditions (tempera- with epoxy resin by using of ture and clearance) of therimproved preparation proce mosetting and thermoplastic CFRP cross-ply laminates.
16:00 4301-4 MICRO-MECHANICAL MODEL AND MATERIAL REMOVAL MECHANISM OF MACHINING CARBON FIBER REINFORCED POLYMER COMPOSITE Bin Niu (Dalian University of Technology), Rui Yang (Dalian University of Technology)
4302-4 EFFECT OF FUNCTIONALIZATION AND ADDING METHOD OF CARBON NANOTUBE ON INTERLAMINAR PROPERTY OF CARBON FIBER/EPOXY COMPOSITE Mengsi Zhang (Beihang University), Yizhuo Gu (Beihang University), Yujiao The present paper studies the Fan (Beihang University), material removal mechanism Min Li (Beihang University), of machining composites by a Shaokai Wang (Beihang micro-mechanical model, and University), Zuoguang Zhang analytically derives cutting (Beihang University) forces based on a two-parameter elastic foundation beam. The effect of functionalization and adding methods of carbon nanotube on interlaminar property of carbon fiber/epoxy composite were studied, including the effect on resin and interface properties.
Auditorium 11 4304-3 EVALUATION OF SELF-HEALING PERFORMANCE IN EPOXY/ GLASS FIBER COMPOSITES MANUFACTURED USING VARTM Siddharth Dev (University of Massachusetts Lowell), Christopher Hansen (University of Massachusetts Lowell)
88
Meeting room 18 4306-3 DETERMINATION OF GEOMETRICAL PARAMETERS FOR ELECTRICAL CHARACTERIZATION OF A CFRP DURING CURING Sonia Sassi (Institut Clément Ader), Philippe Marguerès (Institut Clément Ader), Rébecca Le Begue (Institut Clément Ader), Philippe Olivier (Institut Clément Ader)
Resin solvent healing using pre-synthesized solvent loaded double shell walled microcapsules is investigated for implementation into The goal of this paper is to epoxy-based fiber-reinforced develop a novel magnetic biocomposite materials. composite scaffold made of Bombyx mori silk fibroin and magnetite nanoparticles for wound dressing applications.
Title: DETERMINATION OF GEOMETRICAL PARAMETERS FOR ELECTRICAL CHARACTERIZATION OF A CFRP DURING CURING. Keywords: CFRP T70/M21, cure monitoring, geometrical parameters, electrical proprieties.
4304-4 TOUGH, SELF-REPORTING, BIOCOMPOSITES USING SILK AND NANOCELLULOSE FIBERS: TOUGHENING, INTERFACE MODIFICATION AND NEW MULTIFUNCTIONAL INTERFACE IMAGING PROBES Jeffrey Gilman (NIST), Jeremiah Woodcock (Georgetown University), Fritz Vollrath (Oxford University), Chelsea Davis (NIST), Ning Chen (Georgetown University), Stephan Stranick (NIST), Ryan Beams (NIST), J. Alexander Liddle (NIST), Iulia Sacui (University of Maryland), Danielle Grolman (University of Akron), Alamgir Karim (University of Akron), Muzhou Wang (NIST), Darshil Shah (Oxford University)
4306-4 PROCESS MONITORING OF GLASS REINFORCED POLYPROPYLENE LAMINATES USING FIBER BRAGG GRATINGS Matthieu Mulle (King Abdullah University of Science and Technology (KAUST)), Husam Wafai (King Abdullah University of Science and Technology (KAUST)), Arief Yudhanto (King Abdullah University of Science and Technology (KAUST)), Gilles Lubineau (King Abdullah University of Science and Technology (KAUST)), Warden Schijve (SABIC), Nikhil Verghese (SABIC)
We will describe the surface functionalization methods developed to demonstrate new mechanically-activatable fluorescent probes (mechanophores) and UV/water activatable fluorescent probes (aquafluor). 16:20 Coffee in the Exhibition
Auditorium 12 4305-3 DEVELOPMENT OF NOVEL SILK FIBROIN-MAGNETITE BIOCOMPOSITES FOR TISSUE ENGINEERING Catalin Zaharia (University Politehnica of Bucharest), Paul Stanescu (University Politehnica of Bucharest), Bianca Galateanu (University of Bucharest), MihaelaCristina Bunea (University Politehnica of Bucharest), Eugenia Vasile (University Politehnica of Bucharest)
The hot press process of glass reinforced polypropylene is monitored with FBGs. UD0 and UD90 laminates are investigated for 2 cooling rates. Transition phases, residual strains and CTEs are estimated.
Meeting room 19 4307-3 MODELLING ELASTICITY OF INJECTION MOULDED SHORT FIBRE REINFORCED POLYMERS: COMPARISON BETWEEN EXPERIMENTAL AND ANALYTICAL APPROACHES Andrea Bernasconi (Politecnico di Milano), Edoardo Conrado (Politecnico di Milano), Francesca Cosmi (Università desgli Studi di Trieste), Peter Hine (University of Leeds) Elastic constants of a short fibre reinforced polyamide are evaluated by two methods: one based on process simulation and mean field homogenization and one based on the Cell Method and micro–CT.
4307-4 A NOVEL TECHNOLOGY FOR SHORT FIBER REINFORCED COMPOSITE –DFFIMRyosuke Nakao (Kyoto Institute of Technology)
Meeting room 20 4308-3 COMPRESSIVE PROPERTIES OF NATURAL FIBRE COMPOSITES Aart Willem Van Vuure (KU Leuven), Joris Baets (KU Leuven), Kimberly Wouters (KU Leuven), Kevin Hendrickx (KU Leuven) Compressive properties of 3 different uni-directional natural fibre composites have been evaluated, based on flax, bamboo and coir fibres. Compressive properties reach 60-80% of tensile properties.
4308-4 CONDUCTIVE AND STRONG NANOCOMPOSITES BASED ON NANOFIBRILLATED CELLULOSE AND CARBON NANOTUBES Alireza Hajian (KTH Royal It is found that the CFRP made Institute of Technology), Lars of carbon prepregs which Berglund (KTH Royal Institute impregnated nylon 66 resin in of Technology) advanced had better bonding properties based on the Single-wall carbon nanotubes tensile test and detailed SEM can be dispersed with the observations. aid of cellulose nanofibrils in aqueous medium and the dispersions can be utilized into making highly conductive nanocomposites.
Meeting room 17 4309-3 ECO-EFFICIENCY EVALUATION ON THE WASTE TREATMENT OF CARBON FIBRE REINFORCED POLYMER Xiang Li (The University of Nottingham), Jon McKechnie (The University of Nottingham), Ruibin Bai (The University of Nottingham) Life cycle costing and environmental assessment methods are applied in this study to quantify the financial and environmental impacts of alternative waste CFRP treatment routes.
4309-4 SUSTAINABLE AND RECYCLABLE THERMOPLASTIC SIZING BASED ON AQUEOUS DISPERSION Aurelie Malho Rodrigues (Laboratoire des IMRCP), Sophie Franceschi (Laboratoire des IMRCP), Emile Perez (Laboratoire des IMRCP), Isabelle Giraud (Institut Carnot CIRIMATPhysiques des polymères), Eric Dantras (Institut Carnot CIRIMAT - Physiques des polymères), Colette Lacabanne (Institut Carnot CIRIMAT - Physiques des polymères) This work will illustrate how we succeeded to optimize, by QSPE method and artificial neural network, an eco-friendly (REACH) aqueous dispersion for thermoplastic sizing at industrial scale.
Meeting room 16 4310-3 TENSILE STRENGTH OF PANBASED CARBON FIBRES AND NANOSTRUCTURE DEVELOPMENT Haruki Okuda (TORAY Industries-Inc.), Jun Watanabe (TORAY Industries-Inc.), Fumihiko Tanaka (TORAY Industries-Inc.), Tomonaga Okabe (Tohoku University), Robert Young (University of Manchester) Tensile failure phenomena of the PAN-based carbon fibres and their potential will be discussed on the basis of a newly developed test technique which combines the loop test and in-situ Raman analysis.
4310-4 INVESTIGATION OF THE STATISTICAL DISTRIBUTIONS OF FRACTURE STRENGTHS FOR FLAX FIBERS USING THE TOW TESTING TECHNIQUE Jacques Lamon (CNRS/ENS), Mohamed R’Mili (INSA LYON)
Thursday 23 July · Scientific Meeting room 5 4311-3 ADAPTIVE MULTIFUNCTIONAL MATERIALS FOR ADDITIVE LAYER MANUFACTURING Richard Trask (University of Bristol), Marc Scholz (University of Bristol), Tom Llewellyn-Jones (University of Bristol), Laura Beckett (University of Bristol), Robert Allen (University of Bristol), Bruce Drinkwater (University of Bristol)
4311-4 STIMULI RESPONSE, STRUCTURAL RECONFIGURATION, AND PROPERTY CONTROL IN CROSS-LINKED POLYMER Michael Aldridge (University of Michigan), Katherine Sebeck (University of Michigan), Weimin Wang (University of Michigan), Andrew Bielawski (University of Michigan), John Kieffer (University of Michigan) Structural developments in spatially confined epoxybased materials systems have been investigated using a combination concurrent Raman and Brillouin scattering experiments and atomistic simulations.
Meeting room 6 4312-3 TENSILE STRESSSTRAIN BEHAVIOUR OF MULTIAXIAL METAL MATRIX COMPOSITES Gerald Watt (University of Surrey), Stephen KyleHenney (TISICS Ltd), Andy Crocombe (University of Surrey), Stephen Ogin (University of Surrey)
Meeting room 7 4313-3 HYBRID LAYERED COMPOSITES FOR HIGH TOUGHNESS H Daniel Wagner (Weizmann Institute of Science)
A review of the ambient temperature tensile stressstrain behaviour of uniaxial and multiaxial metal matrix composites and a simple model to predict non-linear tensile behaviour.
4312-4 IN-SITU THERMAL STRESS MEASUREMENT OF TUNGSTEN FIBER REINFORCED TITANIUM COMPOSITE BY HIGH-LOW TEMPERATURE X-RAY DIFFRACTION Masayuki Nishida (Kobe City College of Technology), Taisei Doi (Student of Advanced Course-Kobe City College of Technology), Tatsuya Matsue (Niihama National College of Technology), Takao Hanabusa (The University of Tokushima)
4313-4 STEEL FOIL REINFORCED COMPOSITES: STUDY OF STRENGTH, PLASTICITY AND PLY SIZE EFFECTS Kunal Masania (University of Applied Sciences and Arts Northwestern Switzerland), Roman Geissberger (University of Applied Sciences and Arts Northwestern Switzerland), Daniel Stefaniak (German Aerospace Centre ), Clemens Dransfeld (University of Applied Sciences and Arts Northwestern Switzerland)
The thermal residual stress alteration of W/Ti composite was estimated by the x-ray diffraction with the cryogenic cooling system, temperature from 25oC to -250 oC
Steel foil and carbon fibre epoxy laminates were studied using ply level hybridisation and thin plies to delay onset of damage circa 30%; failure modes varied significantly with laminate composition.
M1 4314-3 DAMAGE EVOLUTION DURING HIGHTEMPERATURE OXIDATIVE AGING OF COMPOSITES Kishore Pochiraju (Stevens Institute of Technology), Jianyong Liang (Stevens Institute of Technology)
M2 4315-3 DIGITAL IMAGE CORRELATION AND FINITE ELEMENT ANALYSIS APPLIED TO FIBERREINFORCED COMPOSITES AT THE MICRO-SCALE Mahoor Mehdikhani (KU Leuven), Mohammadali Aravand (KU Leuven), Baris A high-resolution Sabuncuoglu (KU Leuven), chemo-mechanics-damage Michaël G. Callens (KU model is used to predict the Leuven), Stepan V. Lomov degradation of high-tem(KU Leuven), Larissa perature polymer matrix Gorbatikh (KU Leuven) composites under long-term thermo-oxidative aging The application of miconditions. cro-scale DIC to fiber-reinforced composites is explored. Validating against FEA, it shows promises for further mechanical investigation at the micro-scale.
M3 4316-3 EFFECTS OF TEMPERATURE ON STATIC AND FATIGUE STRENGTH OF WIND TURBINE COMPOSITES Sibrand Raijmaekers (Knowledge Centre WMC), Iuri Rocha (Knowledge Centre WMC), Rogier Nijssen (Knowledge Centre WMC)
4314-4 MICROMECHANICAL STUDY OF UNIDIRECTIONAL HIGH FIBER CONTENT COMPOSITE UNDER TRANSVERSE COMPRESSIVE, TENSILE AND SHEAR LOADINGS Hai Qing (Nanjing University of Aeronautics & Astronautics)
4316-4 GAMMA IRRADIATION AGING OF BASALT FIBER REINFORCED COMPOSITES Ran Li (Beihang University)
A new theoretical model is developed to perform more detail theoretical analysis on the stress transfer between fibre and matrix, and distributions of stress, strain and displacement in composites.
4315-4 DATA-RICH CHARACTERISATION OF DAMAGE PROPOGATION IN COMPOSITE MATERIALS AFTER INTERMEDIATE STRAIN RATE LOADING Janice Dulieu-Barton (University of Southampton), Gary Battams (University of Southampton)
M4 4317-3 THE LOW VELOCITY IMPACT RESPONSE OF SANDWICH STRUCTURES WITH GRADED FOAM CORES Jin Zhou (University of Liverpool), Zhongwei Guan (University of Liverpool), Rehan Umer (Khalifa University of ScienceTechnology and Research The effect of temperature on (KUSTAR)), Wesley Cantwell the mechanical behaviour of (Khalifa University of wind turbine composites is Science-Technology and evaluated. Damage mech- Research (KUSTAR)) anisms, such as physical ageing and thermal stresses The low velocity impact are described and analysed. response of sandwich structures with graded foams cores have been investigated both experimentally and numerically. Sandwich structures, based on graded foams, were fabricated
4317-4 INVESTIGATION ON THE ENERGY ABSORPTION CAPABILITY OF COMPOSITE CRASHBOX WITH RECYCLABLE THERMOPLASTIC Gamma irradiation aging MATERIAL of E-glass fiber reinforced Simonetta Boria (University epoxy matrix composite is of Camerino), Alessandro investigated in this study. Scattina (Politecnico di The composite were treated Torino) A novel methodology for with a 60Co gamma irradisimultaneously capturing ation dose up to 2.0MGyStarting from information DIC and TSA IR image data Ran Li obtained in the first experfrom CFRP specimens imental tests, the energy during fatigue loading is deabsorption capacity of therscribed and validated iusing moplastic impact attenuaX-ray CT. tors made as thin wall tubes of circular cross section is investigated
M5 4318-3 NUMERICAL MODELS WITH LAYERED ELEMENTS FOR NOMEX HONEYCOMB CORE UNDER FLATWISE COMPRESSION Longquan Liu (Shanghai Jiao Tong University), Hai Wang (Shanghai Jiao Tong University), Zhongwei Guan (University of Liverpool) Different modelling methods of the Nomex honeycomb sandwich structures under flatwise compression were proposed and developed based on the structural features of the Nomex honeycomb cell walls.
M6 4319-3 DESIGN AND ANALYSIS OF A COMPOSITE PATCH REINFORCEMENT SYSTEM FOR A MARINE APPLICATION CASE Pablo Yarza (AIMENTechnology Center), Arijana Milat (as2con), Tomislav Tomac (as2con), Giovanni Risso (CETENA) The aim of this study was to find the optimal configuration of a composite patch for a marine application case, whose objective is to increase fatigue life of a typical detail of balcony opening.
M7 4320-3 DELAMINATION DETECTION IN LAMINATED GLASSY POLYMERS AND POLYMERIC COMPOSITES BY MEANS OF STRAIN SOLITONS Irina Semenova (Ioffe Physical Technical Institute), Galina Dreiden (Ioffe Physical Technical Institute), Alexander Samsonov (Ioffe Physical Technical Institute)
programme M8 4321-3 DEVELOPMENT OF EXTREME-ENVIRONMENT ELECTRONIC INTERFACES THROUGH A COMBINATORIAL MATERIAL OPTIMIZATION AND ADDITIVE MATERIAL DEPOSITION APPROACH Thomas Reitz (The United States Air Force Research Laboratory), Evan Thomas (University of Dayton Research Institute), Kevin Yost (The United States Air Force Research Laboratory), Jared McCoppin (National Research Council)
The paper presents an approach aimed for delamination detection in layered structures made of glassy polymers and composites based on the propagation Homogeneous and hetand optical detection of bulk erogeneous tape casts of strain solitons. Nb-doped CaMnO3 were fabricated into multilayer piles as a strategy to suppress phonon transport and enhance the bulk thermoelectric properties at high T. 4319-4 RETROFITTING THE 4320-4 THE 4321-4 NANOSPRING SUPERSTRUCTURE OF A CHARACTERISATION OF FILMS FOR LARGE PASSENGER SHIP NOTCHED 3D WOVEN MULTIFUNCTIONAL USING COMPOSITES - A COMPOSITES USING INTERFACES DEMONSTRATION THERMO-ELASTIC STRESS Ryan Mott (University Vasileios Karatzas (Technical ANALYSIS AND DIGITAL of Illinois at UrbanaUniversity of Denmark), IMAGE CORRELATION Champaign), Ioannis Niels Hjørnet (Niels Hjørnet Paul Cunningham Chasiotis (University Yacht Design), Christian (Loughborough University), of Illinois at UrbanaBerggreen (Technical Shuo Dai (Loughborough Champaign) University of Denmark) University) 10-micron high Cu nanosThe superstructure of a The paper is concerned with pring films were studied for RoPax ferry has been rethe investigation of notched their mechanical compliance designed using composite versus un-notched strength and reversible compressimaterials and the new using DIC, and the fatigue bility as a function of seed design has been compared damage progression using spacing that varied in the to the existing steel super- TSA, of two 3D woven com- range of 2000-3200 nm. structure. posite specimen types.
89
Scientific programme · Thursday 23 July Congress Hall A 16:40 4401 Processing Manufacturing Technology 13
Auditorium 15 4402 Nano Composites 13
16:40 4401-1 ECO-EFFICIENTLY CURED AND HALOGEN FREE FIRE RETARDANT COMPOSITES Frederik Goethals (Centexbel), Myriam Vanneste (Centexbel), Ralf Lungwitz (STFI), Martina Janickova (Inotex), Jan Marek (Inotex)
4402-1 FABRICATION AND APPLICATIONS OF MULTI-FUNCTIONAL NANOCOMPOSITES FILLED WITH CARBON BASED NANOMATERIALS Soon Hyung Hong (Korea Advanced Institute of Science and Technology (KAIST)), Ho Jin Ryu (Korea Advanced Eco-efficiently cured and hal- Institute of Science and ogen-free fire retardant com- Technology (KAIST)) posites are obtained by using UV-curable fire retardant The experimental results on oligomers as matrix material the characterization of strucand glass UD fabrics as fibre tural and functional properties reinforcement. of CNT- or graphene-reinforced nanocomposites with various inorganic and organic matrices are reviewed.
17:00 4401-2 USING A NEW DEVELOPED DIE AND DIFFERENT TYPES OF THERMOSETTING RESINS TO PRODUCE U200 PROFILES BY PULTRUSION Joao Pedro Nunes (Polymer Engineering Dept / Minho University), David Melo (Minho University), Miguel Vasconcelos (VIDROPOL SA)
Auditorium 11 4404 Multifunctional Composites - Self-Healing and Bio-inspired Designs 4
4403-1 VIRTUAL TESTING OF FOLDCORES MADE OF POLYETHYLENE TEREPHTHALATE Yong Hao (Shenyang Engine Design & Research Institute), Shixi Zang (Shanghai Jiao Tong University), Xiuhua Chen (Shanghai Jiao Tong University), Hai Wang (Shanghai Jiao Tong University), Zhong You (University of Oxford), Xiang Zhou (Shanghai Jiao Tong University)
4404-1 OPTIMISED VASCULAR SYSTEMS FOR THE IN-SITU REPAIR OF COMPOSITE T-JOINTS Jack Cullinan (University of Bristol), Michael Wisnom (University of Bristol), Ian Bond (University of Bristol)
Auditorium 12 4405 Applications - Bio & Medical 3
4405-1 BIOMIMETIC ORGANIC-INORGANIC COMPOSITE COATINGS FOR BIOINERT METAL IMPLANTS USED IN ORTHOPEDICS AND DENTISTRY. PREPARATION AND CHARACTERIZATION Helga Furedi Milhofer (the Hebrew University of Presentation on the use of Jerusalem), Alon Elyada vascules (micro-channels) (the Hebrew University of to repair complex composite Jerusalem), Maja Dutour structures in-situ. Preliminary Sikiric (Rudjer Boskovic work on the potential of Institute), Ronald Schade Cyanoacrylate for composite (Institute for Bioprocessing repairs has also been preand Analytical Measurement A virtual test method based sented. Techniques (iba)), Steffi on the dynamic finite element Grohmann (Institute for simulation was developed Bioprocessing and Analytical to simulate the mechanical Measurement Techniques properties of polyethylene (iba)), Klaus Liefeith (Institute terephthalate foldcores. for Bioprocessing and Analytical Measurement Techniques (iba)), Nissim Garti (the Hebrew University of Jerusalem), Herbert P. Jennissen (University of Duisburg-Essen)
4403-2 FAILURE ANALYSIS OF SANDWICH COMPOSITES WITH CHOPPED FIBER REINFORCEMENT UNDER INPLANE COMPRESSION Shiyong Sun (Dalian University of Technology), Lingbing Xing (Dalian University of Technology), Jin Wang (Shenyang Aircraft Design & Research Institute), Xiaoshan Unexpected largely enhanced Xu (Dalian University of This work concerns the ductility was achieved in Technology) study and optimisation of PVDF/CNTs composites and the production of U200 GRP mechanism was explored. It The experimental test and pultrusion profiles. A steel is believed the phase transfinite element model are heated die was designed and formation and CNTs pinning employed to study the failure processing variables studied are responsible for this phe- process of sandwich composfor 4 different resins and nomenon. ites with reinforcement under catalysts. in-plane compression load.
90
4402-2 POLY (VINYLIDENE FLUORIDE)/MULTI-WALLED CARBON NANOTUBE COMPOSITES: POLYMORPHS TRANSFORMATION INDUCED DUCTILITY Xuelong Chen (Nanyang Technological University), Ming Yin (Nanyang Technological University)
Auditorium 10 4403 Sandwich Structures and Materials 3
Organic-inorganic composite coatings - polyelectrolyte multilayers with CaP - were prepared on glass and Ti surfaces. Calcification increases the mechanical stability and stiffness of the coatings. 4404-2 HEALING OF 4405-2 BIOMIMETIC EARLY STAGE DAMAGE IMPLANT COATINGS FOR OF IONOMER COMPOSITE LOCAL DELIVERY OF INTERLAYERS BY LOCALIZED GROWTH FACTORS AND HEATING UPON MAGNETIC ANTIBIOTICS INDUCTION Steffi Grohmann (Institute for Wouter Post (Technical Bioprocessing and Analytical University of Delft), Santiago measurements (iba)), Garcia (Technical University Manuela Menne (Institute for of Delft), Olivier Bou Matar, Bioprocessing and Analytical Koen Van Den Abeele measurements (iba)), (Catholic University of Leuven Holger Rothe (Institute for ), Sybrand Van Der Zwaag Bioprocessing and Analytical (Technical University of Delft) measurements (iba)), Klaus Liefeith (Institute for Early stage matrix healing Bioprocessing and Analytical of particulate ionomer measurements (iba)) composites was achieved by local particle heating upon The most challenging issues induction. The potential for with bone implants i) stable the restoration of fatigue and osseointegration and ii) impact damage is shown. prevention of a possible implant-associated infection are adressed with a bioactive, biomimetic nano-coating.
Meeting room 18 4406 Experimental Methods for Process Characterisation 5 4406-1 CHARACTERISATION OF RESIN DEGREE OF IMPREGNATION OF OUT-OFAUTOCLAVE PREPREG Marc Palardy-Sim (McGill University), Pascal Hubert (McGill University) Investigation of three methods used to characterize the initial degree of impregnation of out-of-autoclave prepreg: micro-CT, water pick-up, and active thermography.
Meeting room 19 4407 Textile-Based Composites and Fibre Architecture 10
Meeting room 20 4408 Biocomposites 12
Meeting room 17 4409 Recycling of Composites and Sustainability 4
Meeting room 16 4410 Fibres 3
4408-1 ADVANCED BIOCOMPOSITES MADE FROM METHACRYLATED EPOXIDIZED SUCROSE SOYATE RESIN REINFORCED WITH FLAX FIBERS Ali Amiri (North Dakota State University), Nassibeh Hosseini (North Dakota State University), Chad Ulven (North Dakota State University), Dean Webster (North Dakota State University)
4409-1 ALIGNED SHORT FIBRE HYBRID COMPOSITES WITH VIRGIN AND RECYCLED CARBON FIBRES Marco Luigi Longana (University of Bristol), Hana Yu (University of Bristol), Kevin Potter (University of Bristol)
4410-1 EVOLUTION OF CRYSTALLINE PARAMETERS DURING STABILIZATION OF POLYACRYLONITRILE FIBERS Ray Frenzel (University of Augsburg), Judith Moosburger-Will (University of Augsburg), Siegfried Horn (University of Augsburg)
Flax fiber composites were processed with a Methacrylated Epoxidized Sucrose Soyate (MESS) resin and properties were compared agains those of Flax/ Vinyl Ester resin composite.
4406-2 PRACTICAL DEMONSTRATION OF FIBRE EVANESCENT WAVE SPECTROSCOPY FOR CURE MONITORING POLYMER MATRIX COMPOSITES USING NOVEL H3-GLASS FIBRES. Peter Wilson (The University of Sheffield), Simon Hayes (The University of Sheffield), Russell Hand (The University of Sheffield) The development and practical demonstration of a reinforcing style, evanescent wave, fibre sensor for cure monitoring of epoxy resins.
4408-2 FORMING OF NATIVE STARCH/WOOD COMPOSITES Arnaud Regazzi (CNRS), Maxime Teil (CNRS), Pierre Dumont (CNRS), Barthélémy Harthong (CNRS), Didier Imbault (CNRS), Robert Peyroux (CNRS), Jean-Luc Putaux (CNRS) This study deals with the manufacturing of starch/ softwood composites made by thermal and ultrasonic compression moulding while preserving the interesting native properties of their constituents
Intermingled hybrid composites with aligned virgin and recycled short carbon fibres were manufactured with a novel fibre alignment method to increase the availability of recycled carbon fibres.
Textile polyacrylonitrile fibers showing different effective diameters were stabilized under air. The evolution of crystalline parameters of these fibers during stabilization was investigated.
4409-2 RECYCLED GLASS FIBRE/POLYESTER COMPOSITES – PROCESSING AND MECHANICAL CHARACTERIZATION Durai Prabhakaran Rt (University of strathclyde), James Thomason (University of strathclyde)
4410-2 SYNERGISTIC STRENGTHENING OF SISAL FIBER WITH ALKALI TREATMENT AND CELLULOSE NANOCRYSTALS MODIFICATION Yan Li (Tongji University), Zhongsen Zhang (Tongji University)
The present article demonstrate the recycling and reuse of waste glass fibre fabrics. The recycled regenerated long glass fibres are impregnated with polyester resin to study the mechanical properties
This study investigated the synergistic strengthening effect of sisal fiber with alkali treatment and cellulose nanocrystals modification by experiments and theories.
Thursday 23 July · Scientific Meeting room 5 4411 Multifunctional Composites - Adaptive Response and Reconfiguration 5 4411-1 SYNTHESIS AND CHARACTERIZATION OF BISMALEIMIDE BASED THERMOSET TRIPLESHAPE POLYMERIC SYSTEM Qiwei Zhang (Harbin Institute of Technology), Yanju Liu (Harbin Institute of Technology), Jinsong Leng (Harbin Institute of Technology)
Meeting room 6 4412 Composites with Metallic Components 4
Meeting room 7 M1 4413 Hybrid Composites 3 4414 Simulation of Progressive Failure 2
4412-1 EFFECT OF MICROSTRUCTURE CONTROL ON THERMAL AND ELECTRICAL CONDUCTIVITIES OF CNF/ AL COMPOSITES Gen Sasaki (Hiroshima University), Yusuke Omuro (Hiroshima University), Yongbum Choi (Hiroshima University), Kenjiro Sugio (Hiroshima University), Kazuhiro Matsugi (Hiroshima University)
4413-1 CHEMICAL AND MECHANICAL PROPERTIES OF CO-CURED HYBRID COMPOSITE/ALUMINIUM STRUCTURES Sébastien MERCIER (ONERA), Romain AGUOGUE (ONERA), Anne MAVEL (ONERA), Pilippe NUNEZ (ONERA)
This paper is related to the mechanical and chemical This paper concerns the properties of Aluminium/ synthesis and characterCFRP hybrid materials. It ization of bismaleimide Fiber direction in CNF/Al concerns the influence based triple-shape memory composites by sintering was of the aluminium surface polymers. The author finds controlled by rolling in order treatment on the interface it necessary to introduce to improve the electrical and properties diisocyanate into polymeric thermal conductibity. These system. propertes was affected by the fiber orientasion, density.
4411-2 DEVELOPMENT OF NOVEL COMPOSITE SANDWICH STRUCTURES WITH INTEGRATED SHOCK ABSORBING FUNCTIONALITY Simon Bates (University of Bristol), Richard Trask (University of Bristol), Ian Farrow (University of Bristol)
4412-2 EVALUATION OF ALUMINA AS PROTECTIVE COATING FOR CARBON FIBERS IN MAGNESIUMBASED COMPOSITES Alfaferi Zainal Abidin (Fraunhofer IKTS), Mario Krug (Fraunhofer IKTS), Michel Wolf (Technical University Dresden), Rafał Kozera (Faculty of Materials A parametric study to Science and Engineering assess the compressive Warsaw University of behaviour of 3D printed, Technology), Martin Knaut thermoplastic polyurethane (Technical University cellular architectures, deDresden), Ingolf Endler signed to be integrated into (Fraunhofer IKTS), Alexander energy absorbing sandwich Michaelis (Fraunhofer IKTS) panel composites. Alumina thin layer can be used as protective coating in the Cf/AZ91 system. No interfacial reaction is observed at the fiber-matrix interface and furthermore the layer promote wetting with AZ91.
4413-2 FALLING-WEIGHT IMPACT AND POST-IMPACT FLEXURAL PERFORMANCE OF HYBRID FLAX/CARBON LAMINATES Fabrizio Sarasini (Sapienza University of Rome), Carlo Santulli (Università degli Studi di Camerino), Jacopo Tirillò (Sapienza University of Rome), Teodoro Valente (Sapienza University of Rome), Luca Lampani (Sapienza University of Rome), Paolo Gaudenzi (Sapienza University of Rome) Hybrid carbon(C)/flax (F) fiber laminates have been investigated under impact up to 30 J measuring BVID and post-impact flexure and considering the respective merits of CFC and FCF configurations.
M2 4415 Digital Image Correlation 3
4414-1 FAILURE ANALYSIS OF NOTCHED FIBERREINFORCED COMPOSITE MATERIALS Guangyan Liu (Beijing Institute of Technology), Kaili Tang (Beijing Institute of Technology), Hongchen Bao (Beijing Institute of Technology)
4415-1 MEASUREMENT OF THE INTERNAL STRAIN DISTRIBUTION IN A REINFORCED RUBBERMATRIX COMPOSITE USING DIGITAL VOLUME CORRELATION Hubert Schreier (Correlated Solutions-Inc.), David Mollenhauer (US Air Force Research Laboratory), Progressive failure analysis Andrew Makeev (University of notched composite of Texas Arlington), Eric laminates was performed by Jones (US Air Force introducing surface-based Research Laboratory), Sirina cohesive contact to model Safriet (University of Dayton the longitudinal splitting. Research Institute) A rubber-matrix composite specimen was investigated using digital volume correlation to assess bias and noise from the technique and compare experimental results to strain from finite element model.
4414-2 MODELING OF DAMAGE AND SCALING EFFECTS IN COMPOSITE PIPES SUBJECTED TO LOW-VELOCITY IMPACTS. Ana Nieto (Petroleum Institute), Fahad Almaskari (Petroleum Institute)
4415-2 DYNAMIC ANALYSIS OF ADHESIVELY BONDED COMPOSITE SINGLE LAP JOINTS USING FULL-FIELD MEASUREMENT TECHNIQUES George Crammond (University of Southampton), The results of the effect of J M Dulieu-Barton geometrical properties in (University of Southampton), the initiation and propaga- S W Boyd (University of tion of damage in composite Southampton) pipes under low-velocity impact are presented and Full-field evaluation of the analyzed. strains in an adhesively bonded composite single lap joint under quasi-static and high rate loading using high speed Digital Image Correlation (DIC).
M3 4416 Dynamic Fracture 3
M4 M5 M6 4417 Impact and Dynamic 4418 Multiscale Modelling 4419 Applications - Civil Structural Analysis 2 of Structures 4 Engineering 3
4416-1 PERMISSIBLE LOW VELOCITY IMPACT DEFECTS IN ORGANIC INTERLOCK WOVEN COMPOSITE Myriam Kaminski (ONERA), Adrien Elias (ONERA), Frédéric Laurin (ONERA)
4417-1 OPTIMIZATION OF AN AUTOMOTIVE COMPOSITE BUMPER BEAM WITH OPEN SECTION FOR PRODUCTION AND STRUCTURAL PERFORMANCE Alem Tekalign Beyene (Politecnico Di Torino), A two-step simulation apGiovanni BELINGARDI proach has been proposed (Politecnico Di torino), Giada and has consisted in preFalcinelli (Politecnico Di dicting the damage induced Torino) by an impact in order to estimate the residual strength GMT bumper beam has of the specimen. been considered for light weight and better crash worthiness . Open section beam were chosen for production viability . FE cross-sectional and ribs optimization has conducted.
4418-1 INTERLAMINAR STRESSES IN CORRUGATED STRUCTURES MADE FROM ANISOTROPIC MATERIALS Claudia Thurnherr (ETH Zürich), Gerald Kress (ETH Zürich), Paolo Ermanni (ETH Zürich) The present study investigates the influence of geometry and material anisotropy on the interlaminar shear and through-thickness stress in corrugated laminates.
KEYNOTE 4419-1 LONG TERM RELIABILITY OF CFRP IN BRIDGE ENGINEERING Urs Meier (EMPA-Swiss Federal Laboratories for Materials Science & Technology), Rolf Brönnimann (EMPA), Peter Anderegg (EMPA) Starting from 1991 pilot projects with CFRP applications have been initiated in bridge construction. Most noticeable is the Verdasio Bridge with a sustained stress of 1610 MPa in the CFRP cables.
programme
M7 4420 Thermography 2
M8 4421 Multifunctional Composites - Processing and Integration 2
4420-1 FULL FIELD INSPECTION OF COMPOSITE COMPONENTS USING NATURAL FREQUENCY EXCITATION Rachael Waugh (University of Southampton), Janice Dulieu-Barton (University of Southampton), Simon Quinn (University of Southampton)
KEYNOTE
Thermoelastic stress analysis and digital image correlation (DIC) give different but complimentary information. To enable both to monitor cyclically loaded panels a lock-in DIC approach is introduced.
4421-1 MULTIFUNCTIONAL MICROVASCULAR COMPOSITES Scott White (University of Illinois at UrbanaChampaign), Stephen Pety (University of Illinois at Urbana-Champaign), Anthony Coppola (University of Illinois at UrbanaChampaign), Kevin Hart (University of Illinois at Urbana-Champaign), Jason Patrick (University of Illinois at Urbana-Champaign), Ryan Gergely (University of Illinois at UrbanaChampaign), Nancy Sottos (University of Illinois at Urbana-Champaign), Jeff Moore (University of Illinois at Urbana-Champaign) Complex multidimensional vascular polymers and composites are seamlessly fabricated by using sacrificial material templates based on poly(lactide) polymers treated with a tin catalyst.
4416-2 AN ASSESSMENT OF THE ARAMID FELT HIGH VELOCITY IMPACT RESISTANCE Natalia Dolganina (National Research South Ural State University), Oleg Kudryavtsev (National Research South Ural State University), Sergey Sapozhnikov (National Research South Ural State University) Non-woven needle-punched aramid felt “Twaron® Felt No.9” impacting by 6.35 mm steel ball was studied numerically and experimentally for better understanding of the main energy dissipation mechanisms.
4417-2 CAI DAMAGE MECHANISM CHARACTERISATION Yu Yang (Nottingham University), Shuguang Li (Nottingham University)
4418-2 YARN-SCALE ANALYSIS OF NOVEL TEXTILE COMPOSITES LACKING AN ELEMENTARY REPRESENTATIVE ELEMENT Yann Le Cahain (University Parametric study about of Bristol-ACCIS (Advanced damage mechanism of Composites Centre for CAI reveals multiplicity of Innovation and Science)), delaminations is the major Dmitry Ivanov (University factor. For CAI stress conof Bristol-ACCIS (Advanced centration is the main failure Composites Centre for mechanism. Innovation and Science)) A novel manufacturing technique based on 3D printing of liquid resin into a dry textile reinforcement is presented. Tensile tests are carried out and a pragmatic modelling approach is developed.
91
Scientific programme · Thursday 23 July Congress Hall A 17:20 4401-3 A NEW SYNTACTIC FOAM MANUFACTURING METHOD AND STUDY ON ITS PROPERTIES Qiyong Yu (Beihang University), Yan Zhao (Beihang University), Zhian Mi (Beijing Institute of Aeronautical Materials), Yuan Chen (Beihang University)
Auditorium 15 4402-3 ENHANCED DIELECTRIC PROPERTIES IN A THREE-PHASE COMPOSITE INDUCED BY MICROSTRUCTURE TAILORING Zhang Zhenchong (BeiHang University), Yi Zhuo Gu (BeiHang University), Shao Kai Wang (BeiHang University), Min Li (BeiHang University), The present study focuses on Zuo Guang Zhang (BeiHang a new manufacturing method University) involving syntactic foams. Syntactic foams of 500kg/m3 A novel three-phase compos～600kg/m3 were produced ite with high dielectric permitand the compressive property tivity and low loss is proposed is from 35MPa to 49MPa. by introducing barium titanate in polyvinylidene fluoride matrix filled with silicon carbide whisker.
17:40
4402-4 HYBRID TOUGHENING OF EPOXY WITH RUBBER AND NANOSILICA PARTICLES: EXPERIMENTS AND MODELLING Tasnuva Khaleque (Imperial College London-South Kensington Campus), Soraia Pimenta (Imperial College London-South Kensington Campus), Ambrose C. Taylor (Imperial College LondonSouth Kensington Campus)
Auditorium 10 4403-3 PREDICTION OF THE RESIN FILLET SIZE IN CO-CURED HONEYCOMB SANDWICH STRUCTURES Chao Chen (Beihang University), Yanxia Li (Beihang University), Yizhuo Gu (Beihang University), Min Li (Beihang University), Zuoguang Zhang (Beihang University) The research provides a promising way to predict forming quality of honeycomb sandwich structure composites and guidance for the optimization of process conditions and control of processing quality.
4403-4 EXPERIMENTAL ANALYSIS OF STRESSES IN SANDWICH STRUCTURES DUE TO THE BRAZIER EFFECT Carl-Johan Lindholm (Diab Sweden AB), Anders T. Johansson (Chalmers University of Technology), Johan Hedlund (DIAB Sweden AB)
Auditorium 11 4404-3 SELF COOLING FUNCTIONALITY VIA VASCULAR CHANNEL HEAT TRANSIT IN AN EPOXY MATRIX Brendan Dalton (Ulster University ), Edward Archer (Ulster University ), Alistair McIlhagger (Ulster University ) Vascular polymers have been developed via the removal of sacrificial fibres. Components have then been trialled to determine their ability for temperature control through dynamic physical testing.
4404-4 SIMULATION OF SIMULTANEOUS REPAIR AND DEGRADATION PROCESSES IN SELF-HEALING MATERIALS Federico Bosia (University of Torino), Nicola Pugno (University of Trento)
In this work we extend previous Hierarchical Fibre Bundle models for self-healing to Experimental study of curved more general cases where sandwich beams using five tissue growth/degradation is different grades of core mate- considered, and derive overall Epoxies modified by different rial captured several different mechanical behaviour contents of nanosilica and failure modes. Non-linear FEA core-shell rubber particles are agreed fairly well with the characterised. The effect of test results plasticity, particle debonding and tri-axial stresses are studied through FE.
92
Auditorium 12 4405-3 SILKFIBROINCA-P COMPOSITE BONE REPLACEMENT MATERIAL FOR GUIDED BONE GROWTH Feride Sermin Utku (Yeditepe University), Nazan Ebru Aksu (Yeditepe University), Nermin Yuksel (Yeditepe University) Pure silk fabric, boiled in NaCO3 was Ca-P coated in 7 sequential immersion steps in Ca and HPO4, pH 7.4. Brushite crystals, analyzed with XRD, FTIR and SEM were transformed into HA using ECD.
Meeting room 18 Meeting room 19 4406-3 PERMEABILITY MEASUREMENTS AND PROCESS SIMULATION OF LARGE SANDWICH STRUCTURES FOR INDUSTRIAL WIND TURBINE BLADES Allan Roulund Gersborg (LM Wind Power A/S) Experimental characterization sandwich parts for wind turbine blades produced with the VARTM process. A poor quantitative fit with Darcy’s law is found which limits the value of commercial software.
4406-4 COMPARATIVE STUDY ON INTERNAL AND EXTERNAL RELEASE AGENTS – EVALUATION OF PROCESS PARAMETER VARIATION ON DEMOLDING STRESSES Maximilian Schaefer (Technical Universtiy of Munich), Swen Zaremba (Technical Universtiy of Munich), Klaus Drechsler (Technical Universtiy of Munich) The demolding stress is investigated dependent on process parameter: amount of release agent, temperature of mold-surface, number of demoldings, and the kind of a reinforcement structure.
Meeting room 20 4408-3 FEEDSTOCK AND PROCESSING EFFECTS ON THE PERFORMANCE OF NATURAL FIBER THERMOSET COMPOSITES John Wolodko (Alberta Innovates - Technology Futures) In this comprehensive study, the mechanical performance of various natural fibre thermoset composites is compared. The effect of fibre type, fibre processing and composite fabrication method were investigated. Mechanical testing results include tensile strength, tensile modulus, elongation and charpy impact.
4408-4 EXPERIMENTAL EVALUATION OF THE MECHANICAL PROPERTIES OF THE PLA-PAPER COMPOSITE Fernando Ramirez (Universidad de los Andes), Mateo Jimenez (Universidad de los Andes) In the present work, the mechanical properties of a laminated composite made of paper and PLA laminae (PLAPER) were determined experimentally, indicating its potential application in many areas.
Meeting room 17 4409-3 A THERMOCHEMICAL MODEL FOR THE MECHANICAL PROPERTIES OF RECYCLED CARBON FIBRES Joseph Heil (University of Nottingham), Thomas Turner (University of Nottingham), Stephen Pickering (University of Nottingham)
Meeting room 16 4410-3 USE OF FOAMED POLYPROPYLENE FIBERS TO IMPROVE FIBER/MATRIX BOND FOR CEMENTITIOUS COMPOSITES Bartolomeo Coppola (University of Salerno), Luciano Di Maio (University of Salerno), Paola Scarfato (University of Salerno), Loredana Incarnato (University of Salerno), Luc Courard (University of Liège)
A computational model using heat flow and reaction kinetics is used to determine the mass loss and thermal profile For cementitious composite of a composite as it undermaterials fiber/matrix bond goes recycling. is extremely important. This work is aimed to produce fibers with improved surface roughness produced by foam extrusion process.
4409-4 PREPARATION AND CHARACTERIZATION OF LEATHER POLYMER COMPOSITES Meenakshisundaram Omkumar (Colleg of Engineering Guindy), Annamalai Suresh Babu (College of Engineering Guindy), Anbiah Jacob Moses (College of Engineering Guindy) This work proposes utilization of industrial leather wastes such as PVB and milk pouches to prepare a composite material with Green cost based objectives suiting to various industrial applications
Thursday 23 July · Scientific Meeting room 5 4411-3 RESONANCE TUNING OF RF DEVICES THROUGH ORIGAMI FOLDING Kazuko Fuchi (Wright State Research Institute), Philip Buskohl (UES-Inc.), Gregory Reich (Air Force Research Laboratory), Richard Vaia (Air Force Research Laboratory), James Joo (Air Force Research Laboratory) Investigation of the impact of origami folding patterns on reconfigurable RF devices. Sensitivity of resonance characteristics of frequency selective surfaces to fold angles on tessellated structures.
4411-4 TRIPLE-SHAPE MEMORY EFFECT OF POLYSTYRENE BASED POLYMER Wenbing Li (Harbin Institute of Technology), Jinsong Leng (Harbin Institute of Technology), Yanju Liu (Harbin Institute of Technology) In summary, we obtained a new polystyrene-based triple shape memory system, which showed an excellent triple-shape memory effect and could be potentially used in sensors and actuators.
Meeting room 6 4412-3 TAILORABLE CERAMIC CONTENT ALUMINIUM-MATRIX COMPOSITES BY SPONTANEOUS INFILTRATION Matteo Pavese (Politecnico di Torino), Xiang Chen (Politecnico di Torino), Claudio Badini (Politecnico di Torino), Sara Biamino (Politecnico di Torino), Paolo Fino (Politecnico di Torino)
Meeting room 7 4413-3 FRACTURE AND DAMAGE OF CARBON NANOTUBE MODIFIED HYBRID COMPOSITES Rico Zeiler (University of Bayreuth), Zhe Zeng (University of Bayreuth), Dirk-Jacques Dijkstra (Bayer Material Science AG), Volker Altstädt (University of Bayreuth)
Carbon nanotubes are added as matrix reinforcement A spontaneous infiltration in carbon fiber reinforced technique is presented, to composites produced by obtain MMCs with any alloy resin transfer molding. or preform. The theoretical Fracture toughness, impact model is discussed, valiresistance and damage dated in the Al-TiB2-SiO2 tolerance are assessed. system, and the composites characterized.
4412-4 DRAWABILITY OF CFRP/HSS HYBRID COMPOSITE MATERIAL Min-Sik Lee (Pusan National University), Sung-Jin Kim (Pusan National University), Ok-Dong Lim (R&D CenterAutogen), Chung-Gil Kang (Pusan National University) In this study, the formability of the CR340LA/CFRP hybrid composite material is evaluated during square cup deep drawing by considering the process parameters. The experimental results show a decrease
M1 4414-3 EFFECT OF FIBRE ORIENTATIONS ON PROGRESSIVE DAMAGE OF NOTCHED [Θ/0°/-Θ/90°]S COMPOSITE LAMINATES Muhammad Ridha (National University of Singapore), Tong Earn Tay (National University of Singapore), Alan Nettles (NASA)
M2 4415-3 AN EVALUATION OF TEST METHODS FOR DETERMINING ADHESIVE SHEAR STRESS-STRAIN PROPERTIES Kara Storage (Air Force Research Laboratory), Brett A. Bolan (Air Force Research Laboratory), Kevin A. Tienda (University of Dayton Research Institute), Jeffrey A progressive damage A. Smith (University of simulation method was Dayton Research Institute), developed to predict the David H. Mollenhauer (Air behaviour of [θ/0/-θ/90] lam- Force Research Laboratory), inates with fiber orientation Kevin H. Hoos (University of θ varied from 0 to 90 under Dayton Research Institute) open-hole tests. This effort evaluated a variety of strain measurement techniques (digital image correlation, moiré interferometry, and contact extensometers) and generated comparative adhesive property data. 4414-4 A LEVEL SET MODEL FOR THE NUMERICAL MODELING OF COMPOSITES DELAMINATION WITH NONCONFORMING MESH AND MINIMAL REMESHING Elia Picault (Ecole Centrale de Nantes-GeM Institut-UMR CNRS 6183), Patrick Rozycki (Ecole Centrale de NantesGeM Institut-UMR CNRS 6183), Bastien Tranquart (Safran Composites) Progressive delamination of multilayered composite laminates is investigated using a level set model with nonconforming mesh. The case of several crack fronts evolving simultaneously is considered.
M3 4416-3 LOW-VELOCITY IMPACT AND COMPRESSION AFTER IMPACT RESPONSE OF THIN PLY BASED COMPOSITE LAMINATES Emilio V. Gonzalez (Universitat de Girona), Albert Soto (Universitat de Girona), José Ramón Sainz de Aja (Aernnova Engineering Solutions Ibérica S.A.), Federico Martin de la Escalera (Aernnova Engineering Solutions Ibérica S.A.) The work presented is an experimental study of drop-weight impact tests and Compression After Impact (CAI) tests on thin ply laminates. These tests are performed on two type of laminates.
M4 M5 4417-3 UNDERSTANDING THE SEQUENCE OF DAMAGE IN COMPLEX HYBRID COMPOSITEMETALLIC STRUCTURES SUBJECT TO OUT-OFPLANE LOADING USING COMPUTED TOMOGRAPHY Trevor Allen (University of Southampton), Warren Hepples (University of Southampton), Philippa Reed (University of Southampton), Ian Sinclair (University of Southampton), Mark Spearing (University of Southampton)
The progression of damage in a hybrid composite-metallic structure subject to out-of-plane loading has been examined throughout an interrupted quasi-static-indentation test using micro-focus CT 4416-4 TESTING AND 4417-4 SIMULATION COMPARISON OF ENERGY OF THE INTERMEDIATE ABSORPTION FOR CRASH VELOCITY IMPACT TUBES WITH DIFFERENT BEHAVIOUR OF WOVEN FIBRE ARCHITECTURES COMPOSITE LAMINATES AND MATRICES APPLYING PROGRESSIVE Sindy Engel-Watzek (BMW DAMAGE MODELS FOR Group), Dirk Lukaszewicz PLIES AND INTERFACES (BMW Group), Christian Martin Schwab (Vienna Boegle (BMW Group) University of Technology), Melanie Todt (Vienna Rectangular CFRP tubes University of Technology), were tested for their energy Heinz E. Pettermann (Vienna absorption. Parameters such University of Technology) as resin, geometry and layup were studied. The results A main feature of the preshow relevant trends for sented modelling approach effective crash structures. is that the contributions of individual failure mechanisms to the total energy absorption of the laminate can be quantitatively predicted.
programme
M6 M7 4419-2 FUNCTION INTEGRATED ARCH BRIDGE IN A RESOURCE-EFFICIENT LIGHTWEIGHT DESIGN Enrico Rudolph (Institution of Lightweight Structures), Andreas Ehrlich (Institution of Lightweight Structures), Sandra Gelbrich (Institution of Lightweight Structures), Meike Röhrkohl (Institution of Lightweight Structures), Lothar Kroll (Institution of Lightweight Structures)
M8 4421-2 „MULTIFUNCTIONAL FIBRE-REINFORCED METAL MATRIX COMPOSITES WITH INTEGRATED OPTICAL FIBRE SENSORS” Piotr Malczyk (Technische Universität Dresden), Maik Gude (Technische Universität Dresden), Jerzy Kaleta (Wroclaw University of Technology), Anna Szczurek (Wroclaw University of Technology)
Within the scope of a research project innovative, functional integrated, modular support structures in GFRP sandwich design have been developed for the application in new lightweight arch bridges.
This paper contributes to the understanding of hampering phenomena occurring during the integration of Fibre Optic Sensors in the structure of Metal Matrix Composites via casting processes.
4419-3 RESPONSE OF FRPSTRENGTHENED SLENDER RC COLUMNS UNDER CYCLIC COMPRESSION Ghaithan Al-Amri (King Saud University), Yousef Al-Salloum (King Saud University), Nadeem Siddiqui (King Saud University), Husain Abbas (King Saud University)
4421-3 ADDITIVE LAYER MANUFACTURING OF COMPOSITE COMPONENTS: COMBINING SHORT FIBRE COMPOSITE FEEDSTOCKS WITH CURVED LAYER FUSED FILAMENT FABRICATION Robert Allen (University of Bristol), Thomas LlewellynJones (University of Bristol), Richard Trask (University of Bristol)
The available studies on FRP-confined slender RC columns under cyclic loading are very limited. The present study investigates the effect of cyclic compression on FRP-confined slender RC columns.
Investigations are conducted into the potential of constructing short fibre composite materials with tailored reinforcement through curved layer fused filament fabrication (CLFFF).
93
Scientific programme · Friday 24 July Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 8:30 Materials for future aerospace technologies: Challenges and opportunities Richard A. Vaia, Air Force Research Laboratory, Ohio, USA 5102 Nano Composites 14 5103 Sandwich Structures 5104 Fatigue 10 9:30 5101 Processing Manufacturing Technology and Materials 4 14 9:30 5101-1 ASSEMBLY METHOD USED IN MANUFACTURING 3D AUXETIC CELLULAR STRUCTURES Xintao Wang (Harbin Institute of Technology), Li Ma (Harbin Institute of Technology), Jinshui Yang (Harbin Institute of Technology), Qi Shi (Harbin Institute of Technology) A novel manufacturing method of one type of 3D auxetic structure was briefly introduced. Negative Poisson’s ratio character of the structure was numerically demonstrated .
9:50 5101-2 INTERFACIAL PROPERTIES OF CARBON FIBER REINFORCED POLYMER LAMINATES JOINED BY A NOVEL PARTIAL CROSS-LINKING PROCESS Judith Moosburger-Will (University of Augsburg), Markus G. R. Sause (University of Augsburg), Michael Greisel (University of Augsburg), Robert Horny (University of Augsburg), Siegfried Horn (University of Augsburg), Jochen Scholler (Premium AEROTEC GmbH), Llorenç Llopart Prieto (Premium AEROTEC GmbH) The interface region of joined partially cross-linked and fresh epoxy resin is analyzed by nanoindentation. A mismatch of material properties is found which is favorable for enhanced bonding quality.
94
5102-1 LOW VISCOSITY PROCESSING TO FORM ELECTRICALLY CONDUCTIVE EPOXY RESIN COMPOSITES USING NOVEL HYBRID CNTCOATED SILICA PARTICLES Arthur Wilkinson (University of Manchester), Ian Kinloch (University of Manchester), Raja Othman (University of Manchester) Presents a rheological study of hybrid silica-multiwall CNT particles used to produce conductive epoxy-carbon composites. These particles are shown to give low viscosity processing compared to CNT.
5102-2 EFFECT OF STRUCTURAL FACTOR AND MWCNTS ON MECHANICAL RESPONSE OF FILAMENT WOUND CFRP CYLINDERS Xiaolong Jia (Beijing University of Chemical Technology), Wenbin Li (Beijing University of Chemical Technology), Xiaoping Yang (Beijing University of Chemical Technology)
5103-1 NUMERICAL MODELLING OF FATIGUE CRACK GROWTH AND ARREST IN SANDWICH BEAMS INCLUDING CRACK STOPPERS Georgios Martakos (Aalborg University), Jens H. Andreasen (Aalborg University), Christian Berggreen (Technical University of Denmark), Ole T. Thomsen (University of Southampton)
5104-1 ELECTRICAL MONITORING OF FATIGUE IN CARBON FIBRE REINFORCED COMPOSITES Peter Bailey (Instron) Investigating the variation in electrical resistivity of carbon fibre composites during cyclic loading, with a view to improved monitoring of fatigue damage accumulation.
A novel crack arresting device is implemented in sandwich beams and tested under fatigue loads. An FE model of the set up is used to effectively simulate and predict the fatigue life of the specimens.
5103-2 FRACTURE TESTING OF HONEYCOMB CORE SANDWICH COMPOSITES USING THE DCB-UBM TEST Vishnu Saseendran (Technical University of Denmark ), Christian Berggreen (Technical University of Denmark ), Leif Carlsson (Florida Atlantic University)
A novel test-rig exploiting the double cantilever beam-unEffect of structural factor and even bending moments amide various multi-walled (DCB-UBM) concept is used carbon nanotubes (MWCNTs) to determine the fracture on mechanical response of toughness of aircraft type filament wound CFRP cylinder honeycomb core sandwich was examined in this study. composites.
5104-2 THE CONCEPT OF FATIGUE FRACTURE TOUGHNESS IN FATIGUE DELAMINATION GROWTH BEHAVIOR Liaojun Yao (Delft University of Technology), René Alderliesten (Delft University of Technology), Rinze Benedictus (Delft University of Technology) This paper provides a study on mode I fatigue delamination growth in composite laminates. The stress ratio effect on fatigue crack growth is physically interpreted using the energy principles.
Meeting room 18
Meeting room 19
Meeting room 20
Meeting room 17
Meeting room 16
5106 Manufacturing UpScaling and Automation 4
5107 Processing Manufacturing Technology 16
5108 Short Fibre Composites 4
5109 Process Induced Effects 8
5110 Fibres 4
5108-1 MICROMECHANICALLY BASED MODELLING OF THE FAILURE BEHAVIOR OF SHORT FIBER REINFORCED POLYPROPYLENE COMPONENTS UNDER IMPACT LOADING Martin Reiter (Johannes Kepler University / IPPE), Michael Jerabek (Borealis Polyolefine GmbH), Zoltan Major (Johannes Kepler University / IPPE)
5109-1 UNDERSTANDING THE FLOW PROPERTIES OF A THERMOPLASTICTOUGHENED EPOXY RESIN FILM THROUGH MODELBASED ANALYSIS Claudia Creighton (Deakin University), Christian Weimer (Airbus Group Innovations), Patricia P. Parlevliet (Airbus Group Innovations), Bronwyn L. Fox (Deakin University)
5110-1 PART 1: COMPARATIVE STUDY BETWEEN ELECTROLYTIC OXIDATION AND AIR PLASMA TREATMENT OF UNTREATED/UNSIZED FIBRES Racim Radjef (Swinburne University), Sally McArthur (Swinburne University), Bronwyn Fox (Deakin University)
The through-thickness flow characteristics of a toughened epoxy resin film are modelled for cure cycle optimisation. This presentation also describes the new Carbon Nexus research facility.
A comparative study between electrolytic oxidation and air plasma treatment has been performed. Both fibre treatments were compared to untreated/unsized fibres and surface treated/sized fibres.
5108-2 FINITE ELEMENT ANALYSIS OF LINEAR AND NONLINEAR BEHAVIOR OF SHORT FIBER REINFORCED COMPOSITES Mohamed Amine Tiar (UTC), Hocine Kebir (UTC), Rezak Ayad (URCA), Wajdi Zouari (URCA)
5109-2 HIGH ACCURACY CURE PROCESS SIMULATION OF COMPOSITES BASED ON INTERNAL STRAIN MEASUREMENT Shoma Niwa (The University of Tokyo), Kazunori Takagaki (The University of Tokyo), Shu Minakuchi (The University of Tokyo), Nobuo Takeda (The University of Tokyo)
5106-1 ON AN INTEGRATED PROCESS AND MACHINERY CONCEPT FOR ECONOMIC INDUSTRIALIZED PRODUCTION OF HIGHER QUALITY WIND TURBINE ROTOR BLADES Christian Doersch, Oliver Bagemiel (Fraunhofer Institute for Wind Energy and Energy System Technology IWES Northwest)
5107-1 EFFECT OF HEATING CONDITIONS ON MECHANICAL PROPERTIES OF MOLDED PRODUCT IN HYBRID MOLDING Masaki Ohishi (Advanced Fibro-Science-Kyoto Institute of Technology), Tadashi Uozumi (Gifu University Composite Materials CenterGifu University), Akio Ohtani (Gifu University Composite Materials Center-Gifu FhG IWES identified by a cost University), Asami Nakai model cost drivers in blade (Department of Mechanical manufacturing. Development Engineering Faculty of of innovative prefoming and Engineering-Gifu University) blade finish in combination with CAD-CAE-Tools offer high In the hybrid molding, the potential for cost reduction. heating condition and the ejection resin temperature investigated the effect of mechanical properties of the molding articles in the molded parts having rib structure. 5106-2 EFFECT OF 5107-2 A NOVEL TOOL FOR PROCESSING CONDITIONS CONTINUOUS PROCESSING ON THE QUALITY OF OUTOF POLYMER-METALOF-AUTOCLAVE LAMINATES HYBRIDS MADE BY AUTOMATED Stefan Mörl (University of FIBER PLACEMENT Bayreuth), Volker Altstädt Anqi Dong (Concordia (University of Bayreuth) University), Suong Hoa (Concordia University), Yan The presented design shows Zhao (Beihang University) a novel tool for the processing of metal-polymer-hybrids. By The combination of inserting the metal foil directly Automated Fiber Placement into the extrusion die, a comand Out-of-Autoclave techpletly continuous process has nology can not only increase been developed. manufacturing rate but also help deliver parts of superior quality.
5110-2 INVESTIGATION OF THE STRENGTH OF THERMALLY CONDITIONED BASALT AND E-GLASS FIBRES Peter Jenkins (University of Strathclyde), Eduardo Sáez-Rodríguez (University of Strathclyde), Liu Yang (University of Strathclyde), Nonlinear projected fiber apJames Thomason (University proach for the analysis of geof Strathclyde), Sara Riopedre ometric nonlinear behavior of A cure process is determined Méndez (University of random short fiber reinforced based on a lot of trial manStrathclyde) composites based on Total ufacture, which is costly Lagrangian Formulation. and time-consuming. We A study of the mechanical developed an advanced cure properties of epoxy comsimulation method based on posite compatible E-glass in-situ measurement by FBG and basaslt fibres following sensors. heat treatment at 300 – 600 °C, and thermal analysis of the degradation of the fibre sizings.
Friday 24 July · Scientific Meeting room 5
Meeting room 6
Meeting room 7
M1
5111 Multifunctional Composites - Coupled Properties and Multiphysics Models 2 5111-1 COMPUTATIONAL DESIGN AND PERFORMANCE ASSESSMENT OF MICROVASCULAR COMPOSITE PANELS FOR BATTERY COOLING Philippe H. Geubelle (University of Illinois), Stephen Pety (University of Illinois), Marcus Tan (University of Illinois), Ahmad Najafi (University of Illinois), Scott R. White (University of Illinois)
5112 Tribology and Wear
5113 Damage Tolerance of 5114 Simulation of Composite Structures 5 Progressive Failure 3
5115 Durability, Creep and 5116 Dynamic Fracture 4 Agressive Environment 3
5112-1 PENETRATION BEHAVIOR OF ELECTROLYTE SOLUTION THROUGH CARBON FIBER REINFORCED THERMOPLASTICS (CFRTP) MATERIAL USING IN AUTOMOTIVE STRUCTURAL APPLICATION Patarapon Palungvachira (Tokyo Institute of Technology), Masatoshi Kubouchi (Tokyo Institute of Technology), Shinsuke Katayama (JFE TechnoResearch Corporation), Hiroyuki Ogata (JFE TechnoResearch Corporation)
5113-1 DESIGN OF FRACTURE RESISTANT COMPOSITES BY UTILIZING SPATIAL MATERIAL PROPERTY VARIATIONS Masoud Sistaninia (Erich Schmid Institute of Materials Science-Austrian Academy of Sciences), Otmar Kolednik (Erich Schmid Institute of Materials Science-Austrian Academy of Sciences)
5115-1 EFFECT OF JUTE ON THE HYDROLYTIC DEGRADATION OF POLY(LACTIC ACID)(PLA) Ning Jiang (Tongji University-China), Tao Yu (Tongji University-China), Yan Li (Tongji UniversityChina)
5114-1 A PHANTOMNODE-BASED COHESIVE ELEMENT FORMULATION WITH COUPLED PLASTICITY FOR THE SIMULATION OF ADHESIVE JOINTS Carlos Sarrado (University of Girona), Joris J. C. Remmers (Eindhoven University of Technology), Albert Turon (University of Girona)
M2
M3
5116-1 MODELLING OF WOUND, THICK UD COMPOSITES FOR HIGHSPEED IMPACTS AND SUBSEQUENT DAMAGE EVALUATION Ralf Matheis (Forschungsgesellschaft Kraftfahrwesen mbH), Helmi Murnisya This paper focuses on the (Forschungsgesellschaft effect of jute fibre on the hy- Kraftfahrwesen mbH), drolysis of poly(lactic acid) Thomas Johansson In the current study, it is A new cohesive element for (PLA) in deionized water un- (DYNAmore Nordic AB) demonstrated that how a the simulation of adhesive der 60 ºC. Water absorption, structure consisting of bulk joints is presented. The mechanical properties and As a part of a virtual testing This collaborative compumaterial and soft interlayers element is based on the so on were characterized. methodology for crash analtational and experimental becomes fracture resistant, phantom node method and ysis, a modelling approach study focuses on the design, if the composite architecture allows the simulation of for wound Type IV CNG manufacture and assessIn this study, the penetration fulfills certain design rules. coupled plasticity and damtanks is proposed that takes ment of microvascular behavior of water and other age of the interface. several failure mechanisms composite panels used for electrolytic solution through into account. the active cooling of Li-ion Carbon Fiber Reinforced car batteries. Thermoplastics (CFRTP) has been investigated. 5111-2 COMPUTATIONAL 5112-2 WEAR PROPERTIES 5113-2 DAMAGE 5114-2 ANALYSIS OF 5115-2 HYDROTHERMAL 5116-2 INTEGRATION AND EXPERIMENTAL OF NANO-SI-CARBON/ TOLERANCE OF COMPOSITES USING THE AGEING OF GLASS/EPOXY OF SHAPE MEMORY STUDIES ON THE CARBON COMPOSITES DISPERSED-PLY VOXEL FINITE ELEMENT COMPOSITES FOR WIND ALLOY WIRES IN FIBER TRANSPORT WITH BACTERIAL LAMINATES METHOD WITH STRESS TURBINE BLADES REINFORCED POLYMERS PROPERTIES OF HYBRID CELLULOSE AND BAMBOO Peyman Mouri Sardar Abadi AVERAGING Iuri Rocha (Knowledge FOR ENDLESS CRASH NANOCOMPOSITES BASED CHARCOAL ADDITIVE (IMDEA Materials Institute), Guodong Fang (Harbin Centre WMC), Sibrand ABSORBER STRUCTURES ON CARBON NANOTUBES Yoshihito Ozawa (Fukushima Claudio Lopes (IMDEA Institute of Technology), Raijmaekers (Knowledge Sebastian Nissle (Institute AND GRAPHITE University), Uugansuren Materials Institute ), Mostafa Stephen Hallett (University Centre WMC), Rogier Nijssen for Composite Materials), NANOPLATELETS Lkhagvasuren (Fukushima Abdalla (Delft University of Bristol), Bassam EI Said (Knowledge Centre WMC) Moritz Hübler (Institute Mnasoud Safdari (University University), Hiroki Sato of Technology), Daniel (University of Bristol), Dmitry for Composite Materials), of Illinois at Urbana(Fukushima University), Peeters (Delft University of Ivanov (University of Bristol) A glass/epoxy system used Martin Gurka (Institute Champaign), Marwan Tokio Kikuchi (Fukushima Technology) in wind turbine blades is hy- for Composite Materials), Al-Haik (Virginia Tech), M Technology Centre) The stress averaging tech- drothermally conditioned for Sebastian Schmeer (Institute Yousuff Hussaini (Florida Current work presents the nique is an effective method 4800h and the incurred ma- for Composite Materials) State University) The fabrication method of design of a quasi-isotropic to correct the spurious terial damage is investigatSiC/C/C composites with laminate employing disper- stresses introduced by the ed. Results from composites We present a theoretical Bacterial Cellulose and sion of ply orientations. A stepped block-liked interand neat resin specimens extrapolation of the behavior Bamboo Charcoal Powder two-pheromone ant colony face at material junctions in are compared of new hybrid structures additive and their wear optimization algorithm is voxel finite element models. under tensile loading, give properties were investigated used to find an optimum an estimation of their potenand the effects of SiC addi- laminate for CAI. tial and demonstrate a first tive were discussed. experimental validation.
M4
M5
M6
M7
5117 Impact and Dynamic 5118 Applications Structural Analysis 3 Automotive and Rail 3
5119 Applications - Civil Engineering 4
5120 Ultrasound and Acoustic Emission
5117-1 PERFORMANCE OF COMPOSITE FUSELAGE AFTER MULTI-SITE IMPACTS Spyridon Psarras (Imperial College London), Paul Robinson (Imperial College London), Mazdak Ghajari (Imperial College London), Raul Muñoz (Imperial College London), Lorenzo Iannucci (Imperial College London)
5119-1 FULL SCALE FORM FINDING: INTRODUCING FABRIC MATERIALITY IN FRP FABRICATION FOR ARCHITECTURAL ELEMENTS Arielle Blonder (technion), Yasha Grobman (technion)
5120-1 HYGROTHERMAL EFFECTS ON FATIGUE BEHAVIOR OF NATURAL FIBERS COMPOSITES Kossi Sodoke (Université du Québec à Trois-Rivières), Lotfi Toubal (Université du Québec à Trois-Rivières), Luc Laperrière (Université du Québec à Trois-Rivières)
5118-1 EVALUATION OF THE STATIC AND DYNAMIC PERFORMANCE OF ALUMINIUM AND COMPOSITE JOINTS FOR RAIL APPLICATIONS Udayanga Galappaththi (University of Nottingham), Mike Johnson (University of Nottingham)
Limited knowledge in the area of composite joining technologies acts as a This research investigates barrier for using modular the post-impact behaviour construction principles for of composite fuselage the rail applications. The stiffened panels subjected study is focused to develop to multi-site low-velocity aluminium-carbon fibre impacts by comparing FE composite frictional grip models with tests. joint. This would enable effective use of modular construction principle for composite integration in rail vehicles. 5117-2 EXPERIMENTAL 5118-2 HEAT TRANSFER AND NUMERICAL ANALYSIS OF A CHARACTERIZATION OF COMPOSITE EXHAUST HIGH-VELOCITY IMPACT SYSTEM FOR AUTOMOTIVE DAMAGE IN CFRP APPLICATIONS LAMINATES Niels Reurings (Delft Shigeki Yashiro (Shizuoka University of Technology), University ), Keiji Ogi Sotiris Koussios (Delft (Ehime University), Akinori University of Technology), Yoshimura (Japan Aerospace Karel Vergote (Bosal Exploration Agency (JAXA)), ECS), Otto Bergsma (Delft Yoshihisa Sakaida (Shizuoka University of Technology) University) A new test method is Mechanisms of damage presented to assess the extension in CFRP laminates heat transfer to composite due to high-velocity impact shells lined with a fibrous, will be discussed based on permeable, insulation. This the experiments and predic- will aid in the design optimitions by smoothed particle zation for high-temperature hydrodynamics (SPH). applications.
FRP’s (fiber reinforced polymers) unique material properties have led to its wide application across industries in the past decades. Although we witness a growing interest in the material in the archi
5119-2 MECHANICAL PROPERTIES AND WATER UPTAKE OFPULTRUDED CARBON FIBER REINFORCED POLYURETHANE PLATES Hong Bin (Ministry of Education), Xian Guijun (Ministry of Education), Li Hui (Ministry of Education) Water absorption and thermal-mechanical properties of PU resin and pultruded carbon fiber reinforced PU plates were studied through immersion of specimens in distilled water at different temperatures.
programme M8
The aim of this work is to determine the influence of hygrothermal ageing on the mechanical proprieties and fatigue proprieties of natural fiber composite specifically of quasi-isotropic flax/epoxy
5120-2 A REVIEW OF REFERENCE METHODS FOR AUTOMATED ULTRASONIC EVALUATION OF COMPOSITE STRUCTURES Steen Arnfred Nielsen (FORCE Technology) The paper discusses automated ultrasonic testing of large composite structures like a wind rotor blade and reviews six different reference methods for evaluating the ultrasonic images.
95
Scientific programme · Friday 24 July Congress Hall A 10:10 5101-3 INTEGRATION OF TEXTILE REINFORCEMENTS IN THE INJECTIONMOULDING PROCESS FOR MANUFACTURING AND JOINING THERMOPLASTIC SUPPORT-FRAMES Michael Stegelmann (Technische Universtität Dresden), Michael Krahl (Technische Universtität Dresden), Christian Garthaus (Technische Universtität Dresden), Werner Hufenbach (Technische Universtität Dresden)
Auditorium 15 5102-3 MECHANICAL PROPERTIES AND BIOCOMPATIBILITY OF FUNCTIONALIZED CARBON NANOTUBES FILLED POLYPROPYLENE COMPOSITES FOR ORTHOPEDIC BONE IMPLANTS APPLICATION Jing Ma (Taiyuan University of Technology), Xi Nan (Taiyuan University of Technology)
Auditorium 10 5103-3 IMPACT BEHAVIOUR OF BIO-INSPIRED KAGOME SANDWICH CORE STRUCTURES MANUFACTURED THROUGH SELECTIVE LASER MELTING Inam Ullah (RMIT University), Milan Brandt (RMIT University), Stefanie Feih (Singapore Institute of Manufacturing Technology (SIMTech))
This study investigates the efficiency of carbon nanotubes (CNTs) as reinforcement for polypropylene (PP) for orthoAs part of the research project pedic bone implants applicaTherMobility the project part- tion as a function of different ners developed an innovative surface functionalization design for thermoplastic support-frame-structures that can be manufactured highly automated.
SLM manufactured 3D Kagome truss structures outperform conventional sandwich core structures in static compression and shear. The superior static properties translate into superior impact performance.
10:30 5101-4 CFRP BONDING PRETREATMENT USING M-IR LASER RADIATION Stefan Kreling (Institute of joining and welding-TU Braunschweig), David Blass (Institute of joining and welding-TU Braunschweig), Fabian Fischer (Institute of joining and welding-TU Braunschweig), Klaus Dilger (Institute of joining and welding-TU Braunschweig)
5102-4 DEVELOPMENT OF NANOCOMPOSITE MATERIAL FILMS AND INTEGRATION INTO CFRPS FOR THE DEVELOPMENT OF MULTIFUNCTIONAL STRUCTURES. Athanasios Masouras (University of Patras/Applied Mechanics Laboratory), Antonios Vavouliotis (University of Patras/Applied Mechanics Laboratory), Athanasios Baltopoulos (University of This publication focuses on Patras/Applied Mechanics the application of CO2 laser Laboratory), Vassilis radiation in the M-IR for the Kostopoulos (University of bonding pre-treatment of Patras/Applied Mechanics CFRP utilizing the high abLaboratory), Laurent sorption of the matrix resin for Pambaguian (European Space this wavelength. Agency/ESA) Development of nano - composite films with high content of nano-particles and integration of them to CFRP composites with enhanced electrical and thermal conductivity through the thickness direction.
10:50 Coffee in the Exhibition
96
Auditorium 11 Auditorium 12 5104-3 MODE I FATIGUE CRACK PROPAGATION OF UNIDIRECTIONAL CFRP LAMINATE TOUGHENED WITH CNF INTERLAYER Masahiro Arai (Nagoya University), Jun-Ichi Hirokawa (Shinshu University), Masaki Hojo (Kyoto Universtty), Marino Quaresimin (University of Padova) Wwe implemented an alternative way to increase the interlaminar fracture toughness and fatigue property of CFRP laminates by inserting carbon nanofibers between the unidirectional CFRP laminates.
5103-4 VISCOELASTIC BEHAVIOR OF TWO-LAYER COMPOSITE BEAM IN BENDING Miroslav J. Cerny (Czech Technical University in Prague), Pavel Slapak (Czech Technical University in Prague)
5104-4 TROUGH PROCESS MODELLING FOR THE FATIGUE LIFE ASSESSMENT OF INJECTED NOTCHED SAMPLES: DIFFERENT APPROACHES FOR THE FATIGUE CRITERION APPLICATION Carole Nadot-Martin (Institut Pprime - CNRS - ENSMA A theory of viscoelastic Université de Poitiers-UPR bending for two-layer beams 3346), Sylvie Castagnet subjected to arbitrary loading (Institut Pprime - CNRS has been given. The beam - ENSMA - Université de has generally unsymmetrical Poitiers-UPR 3346), Andrea structure with both viscoelas- Bernasconi (Polytechnics), tic layers. Edoardo Conrado (Polytechnics) Simulated fatigue lives of injected notched samples (3 radii and 2 injection geometries) are compared to experiments. Results show the TPM ability to distinguish notch and microstructure effects.
Meeting room 18 5106-3 NON-CRIMP TUBULAR PREFORMING WITH AUTOMATION SYSTEM AND HIGH PRODUTIVITY Tadashi Uozumi (Gifu Universtiy), Motohiro Tanigawa (MURATA MACHINERY-LTD.), Tatsuhiko Nishida (MURATA MACHINERY-LTD.), Takahiro Miura (MURATA MACHINERY), Akio Ohtani (Gifu Universtiy), Asami Nakai (Gifu Universtiy)
Meeting room 19 5107-3 INFLUENCES OF PROCESS PARAMETERS ON THE MECHANICAL PROPERTIES OF HYBRID SHEET METALFRP-COMPOSITES MANUFACTURED BY PREPREG PRESS TECHNOLOGY Christian Lauter (University of Paderborn), Zheng Wang (University of Paderborn), Isabel Koke (University of A multi-supply filament wind- Paderborn), Thomas Troester ing machine was developed (University of Paderborn) based on the concept of high productivity of produce non- The prepreg press techcrimp tubular fiber preforms nology is an approach to with full automation system. manufacture sheet-metal-FRP structures with expected cycle times of less than five minutes, for instance for automotive lightweight applications.
Meeting room 20 5108-3 FLOW CHARACTERISTICS OF CARBON FIBRE SHEET MOULDING COMPOUNDS Anthony Evans (University of Nottingham), Connie Qian (University of Nottingham), Lee Harper (University of Nottingham), Nicholas Warrior (University of Nottingham), Paul Brookbank (University of Exeter), Luke Savage (University of Exeter)
5106-4 IN-SITU MEASUREMENT OF RESIN STATE AND CURE FOR EFFICIENT NON-AUTOCLAVE MANUFACTURING Daniel Kim (University of Southern California), Timotei Centea (University of Southern California), Steven Nutt (University of Southern California)
5108-4 INTEGRATED NONLINEAR MULTI-SCALE MATERIAL MODELLING OF FIBER REINFORCED PLASTICS WITH DIGIMAT – PRESSURE AND RATEDEPENDENT MATERIAL BEHAVIOURS. Laurent Adam (MSC Software Belgium), Samuel Melchior (MSC Software Belgium), Marc Duflot (e-Xstream engineering Sarl)
5107-4 OPTIMIZATION OF THE INTRINSIC MANUFACTURING PROCESS OF METAL-FRPSTRUCTURAL AUTOMOTIVE COMPONENTS BY RESIN TRANSFER MOULDING CONCERNING BOND STRENGTH Zheng Wang (Chair for Automotive Lightweight Construction), Christian The study clarifies the coupled Lauter (Chair for Automotive effect of out-time and expo- Lightweight Construction), sure to humid environments Thomas Troester (Chair for for a representative thermoset Automotive Lightweight resin, and confirms the use- Construction), Carolin Zinn fulness of in-situ dielectric (Materials Science), Mirko property monitoring. Schaper (Materials Science)
In-mould flow characteristics of carbon/epoxy Directed Fibre Compounds (DFC) compared with Press Formed Compounds (PFC) and benchmark commercial Carbon Fibre Sheet Moulding Compounds (CF-SMC)
Presentation of Digimat which bridges the gap between process and structural modeling via nonlinear multi-scale material models. Focus on pressure sensitive behavior of fiber reinforced plastics.
Meeting room 17 5109-3 INTERNAL STRESS AND DAMAGE ASSESSMENT IN THICK EPOXY BY LASER INDUCED SHOCK WAVE: EFFECTS OF THE PLASTICITY Christian Jochum (ENSTA Bretagne), Michel Arrigoni (ENSTA Bretagne)
Meeting room 16 5110-3 LARGESCALE B, N-CODOPED HIERARCHICALLY NANOPOROUS CARBON NANOFIBERS AS EFFICIENT METAL-FREE CATALYSTS FOR ORR Yongpeng Lei (National University of Defense Thermo-mechanical coupling Technology), Qi shi (National predicts mechanical charac- University of Defense teristics, in thick epoxy, aand Technology), Hongliang their dependance on the de- Yuan (National University of gree of cure. A contactless la- Defense Technology), Yingde ser induced shock inspection wang (National University of evidences this dependence. Defense Technology) B, N-codoped carbon nanofibers (5.25 at% B, 6.68 at% N, 306.3 m2 g-1) were massively prepared, showing good cycling stability, methanol tolerance and direct four-electron pathway for ORR.
5109-4 LAMINATE PROCESSING EFFECT ON MICROVOIDS AND HYDRAULIC FLUID ABSORPTION OF QUARTZ/ BMI LAMINATES Keith R. Hurdelbrink II (University of Oklahoma), Gorkem E. Guloglu (University of Oklahoma), Zahed Siddique (University of Oklahoma), M. Cengiz Altan (University of Oklahoma)
Friday 24 July · Scientific Meeting room 5 5111-3 OPTIMIZING MICROSTRUCTURES FOR CONDUCTIVE NANOCOMPOSITES Gilles Lubineau (King Abdullah University of Science and Engineering (KAUST)-Physical Science and Engineering DivisionCOHMAS Laboratory), Fei Han (King Abdullah University of Science and Engineering (KAUST)Physical Science and Engineering DivisionCOHMAS Laboratory), Angel Mora (King Abdullah University of Science and Engineering (KAUST)Physical Science and Engineering DivisionCOHMAS Laboratory)
Meeting room 6 5112-3 EROSION TESTING OF FILLED VINYLESTERS IN WATER AT ELEVATED TEMPERATURE Sanna Siljander (Tampere University of Technology), Meri Kiviniemi (Tampere University of Technology), Reija Suihkonen (Tampere University of Technology), Mari Lindgren (Outotec Research Center), Essi Sarlin (Tampere University of Technology), Jyrki Vuorinen (Tampere University of Technology)
Meeting room 7 5113-3 PROGRESSIVE DAMAGE MODELLING OF COMPOSITE STRUCTURES Reza Vaziri (The University of British Columbia), Ofir Shor (The University of British Columbia), Mina Shahbazi (The University of British Columbia)
M1 5114-3 DAMAGE INDUCED PLASTICITY AND LOW VELOCITY IMPACT BEHAVIOR OF COMPOSITES Harpreet Singh (Indian institute of Technology Delhi), Puneet Mahajan (Indian Institute of Technology Delhi)
M2 5115-3 EFFECT OF ACCELERATED AGING ON CARBON FIBER / EPOXY COMPOSITES AND NEAT EPOXY RESIN Ana Paula Cysne Barbosa (Federal University of Rio Grande do Norte), Ana Paula Pereira Fulco (Federal University of Rio An adaptive discrete model- An elasto plastic damage Grande do Norte), Maria ling approach is combined model for FRP composites Carolina Burgos Costa with a continuum damage is proposed. A user defined do Nascimento (Federal modelling methodology to subroutine is developed and University of Rio Grande do simulate the progression finite element (FE) simuNorte), José Daniel Diniz of inter- and intra-laminar lations are performed of a Melo (Federal University of damage modes in compos- laminate subjected to low Rio Grande do Norte) Slurry erosion of vinyl ester ite materials. velocity impacts. matrix composites; the efEvaluation of effects of fect of resin, filler and glass aging on carbon-epoxy fibre reinforcement was composites and neat epoxy studied at elevated tempersubjected to accelerated atures. Erosion testing was aging in an aging chamber done in pilot-scale reactor. with controlled conditions of temperature, humidity and UV-radiation. 5112-4 MECHANICAL 5113-4 DELAMINATION 5115-4 COMBINED BEHAVIOUR OF HIGH PROPAGATION UNDER CHARACTERIZATION OF PERFORMANCE FIBER FATIGUE LOADING THE EFFECTS OF HOT /WET ROPES IN TECHNICAL IN BONDED-BOLTED AGING ON PULTRUDED APPLICATIONS COMPOSITE STRUCTURES FRP PLATE Markus Michael (TU Luke Richard (University of Sotirios Grammatikos Chemnitz), Thorsten Heinze Washington), Kuen Y. Lin (University of Bath), Richard (TU Chemnitz), Annett (University of Washington) Ball (University of Bath), Schmieder (TU Chemnitz) Mark Evernden (University Composite delamination of Bath) During the last years, fiber arrest by fasteners is anaropes have proven to be an lyzed under both static and This paper presents a option to replace steel wire fatigue loading in order to ‘complete’ characterization ropes in many technical develop predictive capabilistudy of the hot/wet aging applications. Especially for ties for the design of primaeffects on a commercially hoisting applications or ry aircraft structures. available pultruded Glass winch-based applications, Fibre Reinforced Polymer fiber ropes (GFRP).
M3 5116-3 THE IMPACT DAMAGE ANALYSIS OF 2.5D BRAIDED COMPOSITES Yongqi Yang (Harbin Institute of Technology), Licheng Guo (Harbin), Jiuzhou Zhao (Harbin Institute of Technology), Yidong Zhang (China)
M4 5117-3 EQUIVALENT IMPACT SET-UP FOR LIGHTNING STRIKE DAMAGE ON COMPOSITE COUPONS Floriane Soulas (ISAE), Christine Espinosa (ISAE), Frederic Lachaud (ISAE), Stéphane Guinard (Airbus Group Innovations), Bruno Lepetit (Airbus Group Innovations), Ivan Revel (Airbus Group Innovations) The paper presents the work done to design an equivalent mechanical impact to lightning strike. The methodology, equivalent tests and results are analyzed in order to validate the equivalent method.
5117-4 EXPERIMENTAL AND NUMERICAL ANALYSIS OF A LAMINATED BASALT COMPOSITE PLATE SUBJECTED TO BLAST LOAD Süleyman Baştürk (Turkish Air Force Academy), Sedat Süsler (İstanbul Technical University), Halit S. Türkmen (İstanbul Technical University), Valentina Lopresto (University of Naples Federico II), Silvio Genna (University of Naples Federico II), Zafer Kazancı (Turkish Air Force Academy)
M5 5118-3 IMPLEMENTING OF THE OPTIMIZED TRUCK SEAT PLATE MADE OF THERMOPLASTIC GF/PP COMPOSITE Edgars Labans (Riga Technical University), Kapsars Kalnins (Riga Technical University), Eduards Skukis (Riga Technical University), Philippe Lefort (Volvo Group Trucks Technology), Clement Dufour (GEMTEX), Wolfgang Trümper (TU Dresden), Tim Callin (TU Dresden)
M6 M7 5119-3 UPGRADING SHEAR-STRENGTHENED RC BEAMS IN FATIGUE USING EXTERNALLYBONDED CFRP Georges El-Saikaly (University of Quebec-École de Technologie Supérieure (ÉTS)), Omar Chaallal (University of Quebec-École de Technologie Supérieure (ÉTS))
programme M8
The effectiveness of two externally-bonded carbon fiber-reinforced polymer (EB-CFRP) systems in In current research design, extending the service life of optimisation and prototyping RC T-beams shear-strengthof truck cabin seat plate ened for fatigue upgrade made of thermoplastic GF/ has been examined. PP composite was performed. Prototyped part has been validated by NDE and bolt pull-out test 5118-4 BALLAST IMPACT EFFECT ON FATIGUE RESISTANCE OF COMPOSITE BASED CARBODYSHELLS IN RAILWAYS Mohamed Rachik (UTC), Pengcheng Cheng (UTC), Abdelouahed Laksimi (UTC) The aim of this study is to integrate ballast impact influence in fatigue assessment for carbodyshell design. Lifetime of damaged structures can be estimated according to S-N curve of undamaged one.
The use of the advanced laminated composites is become more important in the structures of many engineering applications such as space stations, aerospace vehicles, automotives and marine structures.
97
Scientific programme · Friday 24 July Congress Hall A 11:20 5201 Processing Manufacturing Technology 15
Auditorium 15 5202 Nano Composites 15
Auditorium 10 5203 Sandwich Structures and Materials 5
Auditorium 11 5204 Multifunctional Composites - Self-Healing and Bio-inspired Designs 5
11:20 5201-1 MATERIAL CHARACTERIZATION FOR DETERMINING THE CONSOLIDATION PROPERTIES OF CARBON FIBER TAPES WITH PA 6 MATRIX Philipp Schaefer (Technische Universitaet Muenchen), Swen Zaremba (Technische Universitaet Muenchen), Klaus Drechsler (Technische Universitaet Muenchen)
5202-1 FRACTURE TOUGHNESS MODELLING OF POLYMER MATRIX MODIFIED WITH NANO-RUBBER AND MICRO-INORGANIC FILLERS Bernd Lauke (Leibniz-Institut für Polymerforschung Dresden e.V.)
5203-1 FAILURE BEHAVIOR OF CORRUGATED STIFFENED PANEL UNDER OUT-OFPLANE LOADING Kenan Çınar (Namik Kemal University), Fatih E. OZ (Bogazici University), Nuri Ersoy (Bogazici University)
KEYNOTE
Auditorium 12 5205 Structural Design Criteria, Safety and Reliability
5205-1 PROBABILISTIC JUSTIFICATION OF 5204-1 SINGLE CHANNEL COMPOSITE AIRFRAME INMICROVASCULAR DELIVERY SERVICE INSPECTIONS FOR SELF-HEALING Martin Gaitonde (Aircraft POLYMER COMPOSITES Manufacturer) Brett Krull (University of Illinois ), Yelizaveta Fedonina A probabilistic approach is (University of Illinois), Scott described. It has been used A hybrid composite consisting Acoustic emission monitoring White (University of Illinois), to verify in-service inspection of a brittle polymer matrix technique was used to inves- Nancy Sottos (University of tasks for composite aircraft and two filler components tigate the failure modes of a Illinois) structures, such as those on are considered. An analytical stiffened panel with a novel A380 and A350, per damage equation for the composite corrugated core design under We present a microfluidic de- tolerance requirements. Carbon fiber reinforced tapes fracture toughness was three-point bending tests. vice that accomplishes in-situ with a PA 6 matrix a charac- obtained. mixing of two-part healing terized with respect to their agents through a single consolidation properties. The microvascular channel in polfiber-matrix viscosity and the ymer matrix composites. tapes’ surface characteristics are determined.
11:40 5201-2 IMPREGNATION AND MECHANICAL PROPERTY OF TEXTILE COMPOSITE MADE FROM PRE-IMPREGNATED COMMINGLED YARN Toshihiro Motochika (Gifu university), Akio Ohtani (Gifu university), Asami Nakai (Gifu university), Mitsuro Takagi (Kajirene Inc.) New intermediate material for c-CFRTP called pre-impregnated commingled yarn was developed. Impregnation and mechanical property were investigated by comparing to commingled yarn.
98
5202-2 SUPERHYDROPHOBIC SELFREGENERATIVE SILICONE RUBBER NANOCOMPOSITES FOR ELECTRICAL OUTDOOR INSULATION Ana Isabel Mendoza (KTH Royal Institute of Technology), Henrik Hillborg (ABB), Emma Strömberg (KTH Royal Institute of Technology) Development of new structural composite materials for HV outdoor insulation applications using PDMS coated with ZnO nanoparticles, creating hierarchical superhydrophobic and self cleaning surfaces.
5203-2 FABRICATION AND AXIAL COMPRESSIVE BEHAVIOR OF COMPOSITE SANDWICH CYLINDRICAL SHELLS WITH PYRAMIDAL LATTICE TRUSS Jian Xiong (Harbin Institute of Technology), Wei Zheng (Harbin Institute of Technology), Lina Feng (Harbin Institute of Technology), Fanyi Meng (Harbin Institute of Technology) We developed interlocking method and a hot press method to manufacture lightweight carbon fiber composite cylindrical shell with pyramidal truss constructions.
5205-2 PROBABILISTIC ANALYSIS OF COMPOSITE STRUCTURES USING THE CGSM Qi Yin (Université de Technologie de Compiègne), Frédéric Druesne (Université de Technologie de Compiègne), Pascal Lardeur (Université de Technologie de Compiègne) The CGSM is developed for probabilistic analysis of laminated composite plates and shells modeled by finite elements, taking into account the variability of material and physical properties.
Meeting room 18 5206 Experimental Methods for Process Characterisation 6
Meeting room 19 5207 Liquid Composites Moulding 3
5206-1 SIGNAL EVALUATION OF FIBER OPTICAL SENSORS EMBEDDED BETWEEN UNIDIRECTIONAL THERMOPLASTIC PREPREG TAPES IN A HOT-PRESS CONSOLIDATION FOR ONLINE PROCESS MONITORING Robert Gaitzsch (Faserinstitut Bremen e.V.), Michael Koerdt (Technische Universität Chemnitz), Christian Brauner (Faserinstitut Bremen e.V.), Lothar Kroll (Technische Universität Chemnitz), Axel Siegfried Herrmann
5207-1 LIQUID COMPOSITE MOLDING: ROLE OF MODELING AND SIMULATION IN PROCESS ADVANCEMENT Suresh Advani (University of Delaware), Pavel Simacek (University of Delaware)
Fibre optical sensors were embedded in a unidirectional PA-6/GF laminate for online monitoring of the consolidation and annealing process. The sensor signals are discussed and compared with DSC scans.
5206-2 ROOM TEMPERATURE CURE MONITORING USING A DMA /THERMAL FLUX CELL AND MECHANICAL BEHAVIOR OF A PHENOLIC SYNTACTIC FOAM Mounia Bouslah (Ecole Centrale de Lyon), Michelle Salvia (Ecole Centrale de Lyon), Isabelle Deschères (Institut Textile et Chimique de Lyon), Raymond Barbin (ACOEM group)
Meeting room 17 5209 Recycling of Composites and Sustainability 5
Meeting room 16 5210 Fibres 5
5208-1 INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE Andreas Primetzhofer (Montanuniversität Leoben), Andreas Mösenbacher Paper examines the role (Montanuniversität “virtual processing” - the Leoben), Gerald Pinter numerical simulation of man- (Montanuniversität ufacturing process - can play Leoben), Julia Brunbauer in improving part design and (Montanuniversität Leoben) production methodology. Proposal for consideration of mean stress effect and weld lines on the fatigue behaviour for short fibre reinforced polyamide by the local stress approach.
5209-1 MEASUREMENT OF SHORT FIBRE LENGTH USING A RHEOLOGICAL METHOD Thomas Turner (University of Nottingham), Jiang Guozhan (University of Nottingham), Kok Wong (University of Nottingham), Steve Pickering (University of Nottingham)
KEYNOTE
5207-2 INVESTIGATION OF A COST-EFFECTIVE SYSTEM FOR ON-LINE FLOW MONITORING AND QUALITY CONTROL IN RESIN TRANSFER MOLDING Claudio Di Fratta (ETH Zürich), Grigorios Koutsoukis (ETH Zürich), Paolo Ermanni (ETH Zürich)
5209-2 SMART SELFREINFORCED POLY(LACTIC ACID) (PLA) COMPOSITES WITH ENHANCED IMPACT PERFORMANCE, TENSILE PROPERTIES AND HEAT RESISTANCE Fang Mai (Queen Mary University of London), Emiliano Bilotti (Queen Mary University of London), Ton Peijs (Queen Mary University of London)
The work investigates a fast and cost-effective method, based on few pressure sensors, for monitoring the The transformation process of resin flow and controlling the a phenolic syntactic foam was injection parameters during studied by a coupled calorim- Resin Transfer Molding. etry-DMA and a study of the compression behavior was performed by a macroscopic test and by X-ray tomography.
Meeting room 20 5208 Short Fibre Composites 5
5208-2 FATIGUE DAMAGE MECHANISMS DESCRIPTION IN SHORT GLASS FIBRE REINFORCED THERMOPLASTIC BY MICROTOMOGRAPHIC OBSERVATIONS Héloïse Rolland (I2M - Arts et Métiers ParisTech Bordeaux), Nicolas Saintier (I2M - Arts et Métiers ParisTech - Bordeaux), Gilles Robert (Solvay Engineering Plastics) Fatigue damage mechanisms of PA66GF have been observed in relation to its microstructure. Proportions of identified mechanisms are determined at different damage levels.
A method is demonstrated for the quality assessment of recovered carbon fibres. Specifically, the concept of determination of fibre length from the shearing of a viscous fibre-containing suspension
Through development of fully bio-based and recyclable self-reinforced PLA, the high brittleness and low HDT of PLA have been overcome, while simultaneously improving the tensile strength and modulus.
5210-1 SIMULTANEOUSLY STRONG AND TOUGH CONTINUOUS NANOFIBERS: NEXT GENERATION REINFORCEMENT FOR NEW STRUCTURAL SUPERCOMPOSITES? Yuris Dzenis (University of Nebraska-Lincoln) This talk reviews recent progress on continuous nanofibers with unique simultaneously high strength, modulus and toughness and the prospects for nanofibers to replace carbon as reinforcement in the next generation supercomposites.
Friday 24 July · Scientific Meeting room 5 5211 Multifunctional Composites - Coupled Properties and Multiphysics Models 3 5211-1 ELECTRON AND THERMAL TRANSPORT MECHANISM IN CNTNETWORK COMPOSITES FOR STRAIN RESILIENT ELECTRONICS Ajit Roy (Air Force Research Laboratory), Sergei Shenogin (Air Force Research Laboratory), Vikas Varshney (Air Force Research Laboratory), Jonghoon Lee (Air Force Research Laboratory) We propose carbon nanotube network in high-strain tolerant polymer phase to implement strain resiliency in electronic materials and provide materials modeling to design CNT contact morphology.
5211-2 HARVESTING ENERGY BY DEPOLING FERROELECTRIC PZT BASED COMPOSITES Christopher Roberts (University of CaliforniaLos Angeles), Peng Lv (University of California-Los Angeles), Christopher Lynch (University of California-Los Angeles) The depolarization of PZT 52/48 and PZT 95/5 is investigated under uniaxial stress at stress rates of 0.1100 MPa/ms for impact energy harvesting applications.
Meeting room 6 5212 Matrix materials 5
Meeting room 7 M1 5213 Damage Tolerance of 5214 Simulation of Composite Structures 6 Progressive Failure 4
5212-1 PREPARATION AND PROPERTIES OF A NEW SILICON-POLYTRIAZOLE RESIN AND ITS COMPOSITE Bing Guo (Key Laboratory for Specially Functional Polymeric Materials and Related Technology(East China University of Science & Technology)), Liqiang Wan (Key Laboratory for Specially Functional Polymeric Materials and Related Technology(East China University of Science & Technology)), Lei Du (Key Laboratory for Specially Functional Polymeric Materials and Related Technology(East China University of Science & Technology)), Farong Huang (Key Laboratory for Specially Functional Polymeric Materials and Related Technology(East China University of Science & Technology))
5213-1 INTERFACE STRENGTH GRADATION IN THERMOPLASTIC COMPOSITES: A NEW APPROACH TO INCREASE THE DAMAGE TOLERANCE Luigi Sorrentino (CNR IPCB), Fabrizio Sarasini (University of Rome Sapienza), Jacopo Tirillò (University of Rome Sapienza), Giorgio Simeoli (University of Naples Federico II), Salvatore Iannace (CNR - IPCB), Pietro Russo (CNR - IPCB)
Si-PTA resin synthesized from 4,4’-diazidomethyl biphenyl(DAMBP) and LPSA via 1,3-dipolar cycloaddition was preparation and characterization. The resin possessed good heat resistant property. 5212-2 SYNTHESIS AND CHARACTERIZATION OF A NEW HIGH TEMPERATURE SHAPE MEMORY POLYIMIDE Xinli Xiao (Harbin Institute of Technology), Xueying Qiu (Harbin Institute of Technology), Deyan Kong (Harbin Institute of Technology), Yang Hu (Harbin Institute of Technology), Wenbo Zhang (Harbin Institute of Technology), Shen Zhang (Harbin Institute of Technology ), Yanju Liu (Harbin Institute of Technology), Jinsong Leng (Harbin Institute of Technology) Shape memory polyimide with high glass transition temperature and excellent shape memory performances is reported, and the mechanism of high temperature shape memory effects of polyimide is proposed.
5214-1 AN IMPROVED COHESIVE ZONE MODEL VIA SELECTIVE ACTIVATION William Peterson (Montana State University), Douglas Cairns (Montana State University)
5215-1 MECHANICAL BEHAVIOR OF CARBON FIBER/EPOXY FILAMENT WOUND FLAT LAMINATES EXPOSED TO ENVIRONMENTAL CONDITIONING José Humberto Almeida Jr. (Federal University of We demonstrate a method Rio Grande do Sul), Samia that results in an initially Souza (São Paulo State rigid cohesive zone in which University (UNESP)), Edson intrinsic cohesive elements Botelho (São Paulo State remain dormant until need- University (UNESP)), Sandro ed during the course of the Amico (Federal University of analysis. Rio Grande do Sul)
Film stacked thermoplastic composites based on the gradation of the interlaminar interface strength (IGIS) have been investigated by flexural and impact tests as well as by acoustic emission analyzes.
5213-2 EVALUATION OF THROUGH-THE-THICKNESS STRESS DISTRIBUTION UNDER PURE MODE II ON A MODIFIED TRANSVERSE CRACK TENSION TEST Tommaso Scalici (Università degli Studi di Palermo), Giuseppe Pitarresi (Università degli Studi di Palermo), Antonino Valenza (Università degli Studi di Palermo), Giuseppe Catalanotti (Universidade do Porto), Pedro P. Camanho (Universidade do Porto) implementation of two fullfield experimental stress analysis techniques to evaluate the strain and stress field on the through-thickness surface of TCT samples
M2 M3 5215 Durability, Creep and Agressive Environment 4
Filament wound composites are exposed to hygrothermal conditioning. Non-Fickian kinetics govern moisture absorption, elastic and strength tensile/shear properties reduced for aged specimens.
5214-2 A THERMALMECHANICAL A-FEM FOR FRACTURE IN TEXTILE COMPOSITES Qingda Yang (University of Miami), Bao-Chan Do (University of Miami) This paper presents how the novel augmented finite element method (A-FEM) can be extended to account for path-arbitrary, single intra-elemental discontinuities under general thermo-mechanical loading.
5215-2 LONG-TERM DURABILITY TESTING OF TOKYO ROPE CARBON CABLES Ahmed Ali (Université de Sherbrooke ), Hamdy M. Mohamed (Sherbrooke University), Adel Elsafty (University of North Florida), Brahim Benmokrane (Université de Sherbrooke ) The main objective of this study is to investigate the effect of different environmental conditions on the long-term behavior of Tokyo Rope carbon-cables (CFCCs) subjected to tensile load
M4 M5 M6 5217 Impact and Dynamic 5218 Hybrid Composites 4 5219 Applications - Civil Structural Analysis 4 Engineering 5
5217-1 MODELLING DELAMINATION DAMAGE IN ‘EX-SITU’ TOUGHENED LAMINATES DUE TO IMPACT Dafei Li (University of Nottingham), Elena Sitnikova (University of Nottingham), Shuguang LI (University of Nottingham), Xiaosu Yi (Beijing Institute of Aeronautical Materials (BIAM))
5218-1 ELECTRICAL AND MECHANICAL PROPERTY INVESTIGATION OF FUZZY FIBRE-REINFORCED COMPOSITES Idris Gürkan (İstanbul Technical University), Hülya Cebeci (İstanbul Technical University)
5217-2 ANALYTICAL MODELLING AND FE SIMULATION OF IMPACT RESPONSE AND DAMAGE GROWTH IN A THIN PLY LAMINATE Robin Olsson (Swerea SICOMP), Alann André (Swerea SICOMP), Peter Hellström (Swerea SICOMP)
5218-2 IMPACT OF NONHOOKEAN BEHAVIOUR ON MECHANICAL PERFORMANCE OF HYBRID COMPOSITES Christen Malte Markussen (DTU Wind Energy), Bo Madsen (DTU Wind Energy), Hans Lilholt (DTU Wind Energy), Tom Løgstrup Andersen (DTU Wind Energy)
The electrical conductivity is measured in plane and out of plane and mode 1 fracture toughness test is Modelling damage in performed to the specimens laminated composites of to determined multi-functoughened interface through tional properties of fuzzy ‘Ex Situ’ technique, in low fiber-NECs. speed impact, standard fracture tests such as mode I, mode II and mix mode.
Impact damage in thin ply laminates differs from conventional laminates. Models for predicting damage initiation and growth in a thin ply ply laminate are presented and compared with experiments.
Hybrid composites, based on unidirectional fibres of carbon and glass, in an epoxy matrix have been used to investigate the possibility of a hybrid effect. The hybrid effect is observed experimentally
M7
programme M8
5219-1 ACTIVITY REGARDING APPLICATION OF THERMOPLASTIC FRP TO JAPANESE INFRASTRUCTURE Atsushi Hokura (Kanazawa Institute of Technology), Shinichi Miyazato (Kanazawa Institute of Technology) Research activity on infrastructure application of thermoplastic FRP in Japan is described with an introduction to the KITCOI (Kanazawa Institute of Technology-Center of Innovation) project.
5219-2 BUCKLING BEHAVIOUR OF POLYURETHANE FOAM FILLED COLD-FORMED STEEL C-SECTIONS Aaron von der Heyden (TU Darmstadt-Institute for Steel Structures and Materials Mechanics), Jörg Lange (TU Darmstadt-Institute for Steel Structures and Materials Mechanics) Cold-formed steel members tend to fail before reaching their yield strength due to buckling. Regarding this aspect, the influence of filling the cross-section with polyurethane foam is analysed.
99
Scientific programme · Friday 24 July Congress Hall A 12:00 5201-3 NOVEL PREHEATING METHOD WITH MATRIX RESIN IMPREGNATION FOR STAMP FORMING OF CFRTP Takahiro Hayashi (The University of Tokyo), Kenichi Hasegawa (The University of Tokyo), Jun Takahashi (The University of Tokyo) We investigated the effect of the impregnation conditions by a vacuum press preheater for semi-impregnated CFRTP to develop novel preheating device with impregnation.
12:20 5201-4 THERMOPLASTI COMPOSITES: MATERIAL DEVELOPMENTS FOR AEROSPACE APLLICATIONS, INCORPORATION OF A FUNCTIONAL TIE LAYER Hans Luinge (Nijverdal) A tie layer is introduced at the surface of chemically resistant semi-crystallinge thermoplastic composites to improve the adhesion strength between these substrates and coatings or adhesives.
100
Auditorium 15 5202-3 CELLULOSE NANOCOMPOSITES – CONTROLLING DISPERSION AND MATERIAL PROPERTIES THROUGH NANOCELLULOSE SURFACE MODIFICATION Farhan Ansari (KTH Royal Institute of Technology), Michaela Salajkova (KTH Royal Institute of Technology), Lars Berglund (KTH Royal Institute of Technology)
Auditorium 10 5203-3 COST-OPTIMAL DESIGN AND AUTOMATED PRODUCTION OF SANDWICH STRUCTURES FOR WIND TURBINE ROTOR BLADES Peipei Wang (Fraunhofer IWES), Roman Braun (Fraunhofer IWES), Christian Dörsch (Fraunhofer IWES), Heiko Rosemann (Fraunhofer IWES), Florian Sayer (Fraunhofer IWES), Oliver Bagemiel (Fraunhofer This work investigates com- IWES), Frank Prissok (BASF posites of surface modified Polyurethanes), Ragnar cellulose nanocrystals with Stoll (BASF Polyurethanes), PVAc and discusses the effect Jens Brandes (Fibretech of resulting nanostructure Composites), Erwin Fröse (2 on the end properties of the Komponenten Maschinenbau) composites. Automated in-situ foaming of liquid polyurethane directly in the mold is proposed and analytically assessed as a means to reduce production costs of sandwich panels for wind turbine rotor blades. 5202-4 COMPARISON 5203-4 NUMERICAL OF THE PROPERTIES OF MODELING OF RESIN POLYESTER-BASED POWDER SHRINKAGE AROUND INSERT COATINGS CONTAINING IN COMPOSITE SANDWICH DIFFERENT CLAYS MODIFIED PANELS WITH -AMINOHubert CourteauPROPYLTRIETHOXYSILANE Godmaire (Polytechnique Paula Bertuoli (Federal Montreal), Philippe Causse University of Rio Grande do (Polytechnique Montreal), Sul), Lisete Scienza (Federal Edith-Roland Fostsing University of Rio Grande (Polytechnique Montreal), Edu do Sul), Ademir Zattera Ruiz (Polytechnique Montreal) (University of Caxias do Sul) Finite element sensibility In this work the effect of sianalysis of the formation of lane modified montmorillonite surface defects on the visible clays on the mechanical, panel side of blind insert morphological and corrosion assembly. The defects affect protection properties of a pol- visual appearance of business yester-based powder coatings jet furniture. was evaluated.
Auditorium 11 5204-2 TOUGHER COMPOSITES CONTAINING SELF-HEALING MONOMERS PREPARED BY INKJET PRINTING Patrick J. Smith (University of Sheffield), Yi Zhang (University of Sheffield), Elliot Fleet (University of Sheffield), Jonathan Stringer (University of Sheffield), Simon A. Hayes (University of Sheffield), Alma Hodzic (University of Sheffield)
Auditorium 12 5205-3 PROBABILISTIC STRENGTH ESTIMATION IN CONSIDERATION OF SIZE EFFECTS AND LOAD MODES FOR GLASSSHORT-FIBER-REINFORCED THERMOSETTING PLASTICS. Takahiko Sawada (Hitachi Ltd.), Hiroshi Aoyama (Hitachi Ltd.)
5204-3 SELF HEALING OF EPOXY RESINS USING SELF ASSEMBLING HEALING AGENTS Frank Jones (The University of Sheffield), Russell Varley (CSIRO), Stephen Kalista (Rensselaer Polytechnic Institute), Buu Dao (CSIRO), Christopher Pillsbury (Union College)
5205-4 PROBABILISTIC ANALYSIS OF WIND TURBINE BLADES CONSIDERING STIFFNESS, STRENGTH AND STABILITY UNDER EXTREME AND FATIGUE LOADING K. C. Bacharoudis (Centre for Renewable Energy Sources and Saving), D. J. Lekou (Centre for Renewable Energy Sources and Saving), T. P. Philippidis (University of Patras)
Meeting room 18 5206-3 FLOW FRONT AND CURE MONITORING OF THICK CFRP LAMINATES WITH INTEGRATED FIBER OPTIC SENSORS Jonathan Oelhafen (Technische Universität München), Ruben Fernandez (Premium Aerotec GmbH), Dirk Niefnecker (Premium Aerotec GmbH), Swen Zaremba (Technische Universität München), Klaus Drechsler (Technische Universität München)
Meeting room 19 5207-3 WETTING ALONG FIBER(S) PLACED ON SOLID SUBSTRATE Takuma Setoguchi (Tokyo University of Science), Ichiro Ueno (Tokyo University of Science)
5206-4 PROCESS MONITORING FOR RESINS, CARBON FIBER FABRICS, PREFORMS AND CONSOLIDATED CFRPS BY HF RADIO WAVE TECHNIQUES Henning Heuer (Technische Universität Dresden), Martin Schulze (Fraunhofer IKTS), Matthias Pooch (Fraunhofer IKTS), Simone Gaebler (Leibniz Institute of Polymer Research)
5207-4 MINIMIZING VOLATILE-INDUCED SURFACE POROSITY IN RTM VIA MATERIAL AND PROCESS OPTIMIZATION Mark Anders (University of Southern California), Jonathan Lo (University of Southern California), Timotei Centea (University of Southern California), Steven Nutt (University of Southern California)
We propose a strength estimation method for short-fibre-reinforced plastics in Poly(methyl methacrylate) consideration of load modes and/or polyethylene glycol and size effects by using the have been deposited between Weibull statistical theory, FEA, Flow front measurements laminate plies by inkjet and experimental approaches. with embedded FBGs and printing; resulting in a 40% Fresnel reflectometer during improvement in Gic (propvacuum infusion. Additionally, agation). curing and Tg measurements with Fresnel reflectometer in isothermal neat resin experiments.
Healing agents of critical MW for thermal mending of epoxy resins self-assemble in situ via ionomer formation. Efficiencies compare to high MW systems with less impact on viscosity for RTM processing.
Effect of measurement uncertainty related to the material properties and of model uncertainties connected to the loads and the structural models directly on the reliability level of a 90m rotor blade.
EddyCus® High Frequency Eddy current technology applied on CFRP gives valuable information for material diagnostic and process control e.g. fiber position or cure quality of resins.
A special attention is paid to the wetting process along glass fiber(s) settled on the substrate. The tip velocity and the profile of the liquid between the fiber(s) and the substrate are evaluated.
A description of the underlying mechanism behind volatile-induced surface porosity in RTM, and strategies to minimize this type of defect by modifying the resin cure kinetics.
Meeting room 20 5208-3 A LOCAL STRESS ANALYSIS OF THE EFFECT OF FIBRE ORIENTATION ON FATIGUE THE BEHAVIOUR OF A SHORT FIBRE REINFORCED POLYAMIDE. Andrea Bernasconi (Politecnico di Milano), Edoardo Conrado (Politecnico di Milano), Alessandro Cavallaro (Politecnico di Milano), Peter Hine (University of Leeds)
Meeting room 17 5209-3 EFFECT OF FIBRE LENGTH AND SUSPENSION CONCENTRATION ON ALIGNMENT QUALITY OF DISCONTINUOUS RECYCLED CARBON FIBRE Zhe Liu (The University of Nottingham), Kok Hoong (The University of Nottingham), Thomas Turner (The University of Nottingham), Stephen Pickering (The University of Nottingham)
Meeting room 16 5210-2 CARBON FIBRES WITH MODULATED PROPERTIES AND SHAPE ALONG THE FIBRE LENGTH Jonny Blaker (The University of Manchester), David B. Anthony (Imperial College London), Guang Tang (University of Dundee), SitiRos Shamsuddin (Imperial College London), Gerhard Kalinka (Federal Institute of Materials Testing and Research (BAM)), Milo Shaffer A review of the effect of fiber Hydrodynamic alignment (Imperial College London), orientation on the fatigue process is devised to achieve Amin Abdolvand (University of strength of a short glass fiber highly aligned orientation Dundee), Alexander Bismarck reinforced polyamide based distribution mats with dis(Imperial College London) on through process modelling continuous random recycled and local stress analysis is carbon fibre.Effects of fibre The possibility to weaken presented. length and concentration is carbon fibres and shape their invested. diameter using a nanosecond pulsed laser will be demonstrated. Predetermined break points can therefore be introduced into carbon fibres. 5208-4 METHOD FOR ENABLING HIGHLY LOADABLE MATERIAL COMBINATIONS OF PP AND ALUMINUM WITHOUT THE USE OF ADHESIVES Kim Kose (inpro), Ivonne Clausner (Neue Materialien Fürth GmbH), Fred Eggers (Daimler), Birgit Faisst (TRUMPF Laser- und Systemtechnik GmbH)
5209-4 MICROWAVE INDUCED DEGRADATION OF GLASS FIBER REINFORCED POLYESTER FOR FIBER AND RESIN RECOVERY Hülya U. Sokoli (Department of Chemistry and Bioscience, Aalborg University, Esbjerg, Denmark), Rudi P. Nielsen (Department of Chemistry and Bioscience, Aalborg University, Esbjerg, Denmark), Erik G Søgaard (Department A new method for the joining of Chemistry and Bioscience, of polymer-metal-hybrid parts Aalborg University, Esbjerg, is presented. Examples of Denmark), Morten E. reinforced PP (PP-LGF30) on Simonsen (Department of aluminum show very good Chemistry and Bioscience, results even after thermal and Aalborg University, Esbjerg, corrosive aging. Denmark) A solvolysis process to depolymerize the resin in glass fiber reinforced composites and recover the glass fibers has been investigated using microwave induced irradiation.
5210-3 EXTRACTION AND CHARACTERISATION OF CELLULOSE MICROFIBRILS FROM PONGAMIA PINNATA SEED HULL Manjula P (National Institute of Technology Karnataka Surathkal) Biodiesel is a renewable resource of energy and has gained its importance in India due to soaring oil price and largely enhanced environmental awareness. Biodiesel and other biofuels are produced from
Friday 24 July · Scientific Meeting room 5 5211-3 THERMO MECHANICAL BEHAVIOR OF THERMOPLASTIC COMPOSITE HIGHLY FILLED Antoine Jeancolas (Pole de Plasturgie de l’Est), Henri Perrin (Pole de Plasturgie de l’Est), Florence Dinzart (LaBPS), Hafid Sabar (LaBPS)
Meeting room 6 5212-3 THE PROPERTIES OF A SILICON-CONTAINING ARYACETYLENE RESIN MODIFIED BY OCTA(AZIDOPROPYL) POLYHEDRAL OLIGOMERIC SILSESQUIOXANE AND ITS CARBON FIBER REINFORCED COMPOSITES Xiaojun Bu, Lei Du (Key Laboratory for Specially Functional Polymeric Study of the shaping proMaterials and Related cess and evaluation of the Technology (East China thermomechanical behavior University of Science & of a thermoplastic compos- Technology) ite highly filled of micronized A novel resin OAPS-PSA was particles of ceramic obtained from PSA resin and octa(azidopropyl) polyhedral oligomeric silsesquioxane (OAPS) by “click” polymerization and the T300/OAPSPSA had good mechanical properties.
5211-4 MULTIFUNCTIONAL PROPERTIES IN NATURAL FIBER REINFORCED COMPOSITES Hitoshi Takagi (Tokushima University), Antonio Nakagaito (Tokushima University), Ke Liu (Wuhan Textile University)
5212-4 STIFF MONOLITHIC AEROGEL MATRICES FOR STRUCTURAL FIBRE COMPOSITES Hui Qian (Imperial College London), Sang Nguyen (Imperial College London), David Anthony (Imperial College London), Emile Greenhalgh (Imperial The transverse thermal College London), Alexander conductivity of unidirectional Bismarck (Imperial College green composites is found London), Milo Shaffer to be expressed as a func- (Imperial College London) tion of lumen size, thermal conductivity ratio of fiber Carbon aerogel precursors to matrix, and fiber volume were introduced into strucfraction. tural carbon fibre weaves, to generate monolithic hierarchical carbon preforms, subsequently infused with polymer resins to produce dense composites
Meeting room 7 5213-3 STATIC AND DYNAMIC PROPERTIES OF NEEDLE PUNCHED CHOPPED STRAND MATS COMPOSITE WITH OPEN HOLE Daiki Ichikawa (Kyoto Institute of Technology), Ryo Marui (Marui Textile Machinery Co), Tohru Morii (Shonan Institute of Technology), Akio Ohtani (Gifu University)
M1 5214-3 MODELLING OF PROPAGATING DELAMINATIONS IN TEXTILE REINFORCED DUROPLAST BEAMS BY AN ENRICHED SHELL ELEMENT FORMULATION Jim Brouzoulis (Chalmers University of Technology), Martin Fagerström (Chalmers University of Technology), Johannes Främby (Chalmers University of Technology), Jan Krollman (Technische Universität München), Peter Hellström (Swerea SICOMP)
In this study, needle punch process was applied on chopped glass fiber mat in order to improve the properties of glass mat composite A recent XFEM enriched with circular holes. shell element formulation, which internally can represent multiple interlaminar cracks, has been validated against experiments conducted on textile reinforced Duroplast beams
M2 M3 5215-3 ON THE MECHANICAL CHARACTERIZATION OF PULTRUDED FIBRE REINFORCED PLATES SUBJECTED TO HYGROTHERMAL AGING Behrouz Zafari (The University of Warwick), Toby Mottram (The University of Warwic) This paper presents experimental findings from characterization work to understand mechanical property changes of a polymeric composite after exposure to hot/wet conditioning.
M4 5217-3 LOW-IMPACT TESTING ON EPOXY COMPOSITES REINFORCED WITH DNAFUNCTIONALIZED CARBON NANOTUBES Susanna Laurenzi (Sapienza Università di Roma), Matteo Sirilli (Sapienza Università di Roma), Mariagabriella Santonicola (Sapienza Università di Roma) Despite the high elastic modulus and tensile strength of carbon nanotubes (CNTs), the enhancing of the mechanical properties of epoxy resins reinforced by CNTs are largely unpredictable due to their s
5217-4 IMPACT BEHAVIOUR OF COMPOSITE PLATES SUBJECT TO HIGHVELOCITY IMPACT BY RIGID PROJECTILES: ANALYTICAL MODELLING OF THE ELASTIC RESPONSE. Andreas Schiffer (Khalifa University), Vito L. Tagarielli (Imperial College London) Analytical models are developed to predict the elastic dynamic response of circular clamped composite plates subject to high-velocity impact by a rigid projectile.
M5 5218-3 AN IMPROVED FRAGMENTATION MODEL TO ASSIST THE SELECTION OF FIBRES IN HYBRID COMPOSITES Josep Costa (University of Girona), Juan David Vanegas-Jaramillo (Universidad Pontificia Bolivariana), Albert Turon (University of Girona), Luís Javier Cruz (Universidad Pontificia Bolivariana)
M6 5219-3 A NOVEL ANCHOR METHOD OF FRP CABLE FOR LONG-SPAN CABLESUPPORTED BRIDGES Xin Wang (Southeast University)
M7
programme M8
This paper proposes a novel anchor toward large capacity fiber-reinforced polymer (FRP) cable and demonstrates anchor efficiency by the finite element method (FEM) and experiments.
Tow hybridization, to escape from brittleness and to achieve a pseudo-ductile behaviour, is explored by means of an advanced analytical fragmentation model for unidirectional hybrid composites.
5219-4 SIMULATION OF INTERMEDIATE DEBONDING IN FRPSTRENGTHENED RC BEAMS Ricardo Perera (Technical University ), Rui Sun (Technical University), Enrique Sevillano (Technical University) Formulation of a spectral model based on a discrete crack approach to simulate the structural response of flexural FRP-strengthened concrete beams. It is focused on intermediate debonding.
101
Scientific programme · Friday 24 July Congress Hall A 12:40 5201-5 PRODUCTION STUDY OF CARBON FIBER WOVEN FABRIC/PA6 COMPOSIE SHEET USING PA6 SOLUTION Osuke Ishida (Kanazawa Institute of Technology), Wataru Okumura (Industrial Research Institute of Ishikawa), Mitsugu Kimizu (Industrial Research Institute of Ishikawa), Kiyoshi Uzawa (Kanazawa Institute of Technology), Isao Kimpara (Kanazawa Institute of Technology) In this study, the solution impregnation process using the mixture of calcium chloride and methanol was investigated to produce carbon fiber woven fabrics and polyamide 6 composite. 13:00 Lunch in the Exhibition 14:00 Closing Ceremony
102
Auditorium 15 5202-5 ALIGNMENT OF CARBON NANOTUBES IN GLASS FIBER COMPOSITES USING AC ELECTRIC FIELD Charles Bakis (Penn State University), Ambuj Sharma (Penn State University), Kon-Well Wang (University of Michigan) Experiments and finite element analysis are used to investigate the alignment of carbon nanotubes through the thickness of unidirectional glass/epoxy composites using an alternating electric field.
Auditorium 10
Auditorium 11 5204-4 MICROENCAPSULATED SOLVENT-BASED HEALING OF SHAPE MEMORY POLYMERS Jesse Hamilton (University of Massachusetts Lowell), Bradford Olson (University of Massachusetts Lowell), Siddharth Dev (University of Massachusetts Lowell), Norman Rice (Triton Systems Inc.), Christopher Hansen (University of Massachusetts Lowell) Self-healing is pursued by a close-then-heal approach, in which the shape memory effect is activated by damage-induced release of encapsulated solvent to compress and bond fracture surfaces.
Auditorium 12 5205-5 MICROMECHANICS AND RELIABILITY BASED COMPOSITE MATERIAL CHARACTERIZATION FOR WIND TURBINE BLADE COMPOSITES Ghulam Mustafa (Uni of Victoria BC Canada), Curran Crawford (Uni of Victoria BC Canada), Afzal Suleman (Uni of Victoria BC Canada) This work presents a coupled approach for stiffness property prediction of composite materials used in wind turbine blades using advanced micromechanics and reliability-based methodologies.
Meeting room 18
Meeting room 19
Meeting room 20
Meeting room 17 5209-5 INVESTIGATION OF CATALYSED FLUIDISED BED FOR THERMOSET COMPOSITE RECYCLING Kyle Pender (University of Strathclyde), Liu Yang (University of Strathclyde) An investigation into catalysed thermal decomposition of epoxy resin was carried out with the goal to improve the commercial viability of glass fibre reinforced plastic recycling.
Meeting room 16
Friday 24 July · Scientific Meeting room 5
Meeting room 6 5212-5 A TERNARY MWCNT/CERIA/ POLYANILINE COMPOSITE FOR CORROSION PROTECTION Cynthia Oueiny (MAPIEM laboratory), Sophie berlioz (MAPIEM laboratory), François-Xavier perrin (MAPIEM laboratory)
Meeting room 7
M1
M2
M3
M4
M5
M6
M7
programme M8
Ternary MWCNT/Ce/polyaniline nanocomposites were easily prepared andcaracterized. MWCNT/Ce(III)/EB pigments inserted in polyvinylbutyral matrix showed a good corrosion protection efficiency.
103
Scientific programme How to navigate in the scientific programme Remember that you can also search for all presentations in your ICCM20 app. The session number is made of 4 digits: XYZZ X = day (Monday = 1, Tuesday = 2 …) Y = session number this day ZZ = room code The programme number is made of the above 4 digits and adding the order of the presentations in the session: XYZZ-VV X = day (Monday = 1, Tuesday = 2 …) Y = session number this day ZZ = room code VV = presentation order in the session
Break out room
Room code
Congress Hall A Auditorium 15 Auditorium 10 Auditorium 11 Auditorium 12 Meeting room 18 Meeting room 19 Meeting room 20 Meeting room 17 Meeting room 16 Meeting room 5 Meeting room 6 Meeting room 7 M1 M2 M3 M4 M5 M6 M7 M8 Center Stage
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22
How to navigate the poster and mini-oral programme The poster presentations at the ICCM20 are fully integrated in the scientific programme. The poster sessions will include a short 3 minutes long oral overview presentation (termed “mini-oral”) of each poster (maximum of 3 slides) given in plenum to the entire conference. This will be followed by a poster session that will take place in the Exhibition area and Foyer of the Bella Center and where the presented posters will be on display and open for discussion. The Posters are on display from Monday 20 July at 9.00 and until Wednesday 23 July at 16.30.
The numbers in the mini-oral programme is also the number of the posters : the numbers are as follows: PXXZ-VV P=Poster XX = session – (session 100 from 9:30 and session 200 from 13:00) Z = Stage number for presentation (stages 1,2,3,4,5) VV = presentation order in the session (20 presentations in each session)
Index of authors A
104
Adachi, Hirokuni
2206-4
Ahn, Tae-Chang
P205-19
Albarella, Marco
3209-4
Almaskari, Fahad
4414-2
A Hamid, Nurul Nabihah
3115-4
Adali, Sarp
1205-2
Ahuja, Akshaya
3407-2
Albrektsson, Joakim
3118-3
Almdal, Kristoffer
1309-4
A. Ghani, Supri
P104-17
Adam, Frank
P205-5
Ai, Qing
4110-4
Alderliesten, Rene
3220-2
1305-2,2117-1,5215-1
Abbas, Bahoz
4117-2
Adam, Laurent
5108-4
Aimmanee, Sontipee
2205-1
Alderliesten, René
5104-2
Abbas, Husain
4419-3
Adam, Till Julian
2104-4
Airinei, Anton
P205-11
Aldica, Gheorghe
2220-3
Almeida Jr., José Humberto Almeida, Sergio
Abbas, Syed Haider
2219-3
Adarraga, Itziar
3416-1
Aitomäki, Yvonne
4109-1
Aldridge, Michael
4311-4
Alomari, Ahmed
P203-10
Abdalla, Mostafa
Adebahr, Wolfgang
1118-3
Akamatsu, Mikio
P202-7
Alexopoulos, Nikolaos
P202-9
P103-5
Adelung, Rainer
1312-1
3205-1
Alfano, Giulio
3209-4
P201-17
Al-Haik, Marwan
2103-4,5111-2
4419-3
5210-2
1104-3
Al-Salloum, Yousef
Abdolvand, Amin
Adumitroaie, Adi
P203-10 4413-3,5107-2 3319-2
4203-3
Achour Renault, Nadia
P202-5
2220-2,4107-2
4419-3
4311-3,4421-3
Ahmed, Ifty
Al-Amri, Ghaithan
Allen, Robert
Amico, Sandro
Abrate, Serge
1315-4,3208-2
4308-1
1203-2,2216-1
Ahlqvist, Fredrik
Alam, Ashraf
Allegri, Giuliano
Ameli, Mohammad
1218-3,1218-4,2106-2
1201-2
3212-1
Aboura, Zoheir
Ahlborn, Holger
Al Maadeed, Mariam Alali
2106-2
1317-4
1303-3
Allaoui, Samir
Alzebdeh, Khalid
Abot, Jandro
2218-1
3310-1
3113-4
Ahamed, Jasim
Al Abadi, Haider
Allain, Nathalie
Altstädt, Volker
4412-2
4413-1
3112-3
Abidin, Alfaferi Zainal
Aguogue, Romain
Akugre, Emmanuel
3203-2
5109-4
2218-3
Alkhader, Maen
Altan, M. Cengiz
Abel, Philipp
2106-2
P205-3
P105-19
Agogue, Romain
Aktas, Alper
Alipour, Nazanin
Alsulaiman , Faleh
P102-17
4210-1
4405-3
Abdulkarimova, Roza
Agius, Steven
Aksu, Nazan Ebru
5215-2
4316-1
1103-3
Ali, Ahmed
Alston, Sue
Abdrakhimov, Ruslan
3319-1
3201-3,P204-3
P102-11,P102-12
Agarwal, Ankit
Akkerman, Remko
Alhussein, Hussam
4101-1
P205-6
5207-1
Alshahrani, Hassan
Abdrahimov, Ruslan
Advani, Suresh
Akbarzadeh Shafaroudi, Abdolhamid Akepati, Avinash
Alpay, Yakup Okan
Abdin, Yasmine
1205-1,2105-2,34051,5113-2 1304-3,3108-2,3404-2
Alonso, María Virginia
3211-1
Alamry, Ali Naem S
1116-4
Allen, Tom
Ahn, Hyunchul
Amico, Sandro C.
Alba, Maria Bruna
P203-16
1108-4,1311-2,41032,4319-2 4417-3
1120-2,1120-5,13052,2117-1,5215-1 P105-18
Amiri, Ali
4408-1
3116-1
Allen, Trevor
1305-3
Index of authors// Ammasai Sengodan, Ganapathi An, Ping
3106-1
An, Qi
4321-1
Anantharaju, Rajaneesh
P202-19
Anderegg, Peter
4419-1
Anders, Mark
4206-1,5207-4
Andersen, Tom Løgstrup
5218-2
Anderson, Johan
3118-3
André, Alann
5217-2
Andreasen, Jens H.
5103-1
Andrieux, Jérôme
4212-1
Andrieux, Jérôme
2102-1
Androulidakis, Charalampos Aniskevich, Andrey
3212-2
Anjang, Aslina
3118-1
Anoshkin, Aleksandr
P202-20
Ansari, Farhan
5202-3
Ansari, Mohd Farhan
2210-2
Anstey, Andrew
4308-2
Anthony, David
2102-3,5212-4
Anthony, David B.
5210-2
Antin, Kim-Niklas
4212-2
Antoine, G. O.
3305-4
Antonelli, Valeria
3105-1
Antunes, Paulo
P101-5
Aoki, Saiko
3113-3
Aoki, Takahira
1219-2,2116-1
Aoki, Takuya
P204-11
Aoyama, Hiroshi
5205-3
Arai, Masahiro
5104-3
Arakaki, Francisco Kioshi
2119-4
Arao, Yoshihiko
2120-2
Aratama, Shigeki
1114-5
Araújo Teles, Ricardo
4205-4
Aravand, Mohammadali
2202-2,4315-3
Arbaoui, Jamal
1113-3
Arbelo, Mariano
1305-1
Archer, Edward
4404-3
Aretxabaleta, Laurentzi
1311-3
Argoud, Nans
2218-2
Arhant, Mael
1120-3
Arian Nik, Mahdi
3205-1
Arif, Abul Fazal M.
P203-10
Arikawa, Shuichi
4316-2
Aristégui, Christophe
1210-2
Arleo, Giuseppe
P203-16
Armand, Michel
P205-9
Armanios, Erian
4115-4
Arnold, Cris
4316-1
Arora, Hari
3103-2
P103-13
4216-3,P205-14
Arrieta Diaz, Andres Felipe 3405-2 Arrigoni, Michel
5109-3
Arrillaga, Alex
P103-4
Arsenyeva, Anna
1305-4
Arvieu, Corinne
P103-12
Bai, Ruibin
4309-3
Baur, Jeffrey
3121-3
Bezmelnitsyn, Alexander
P101-4
Asadi, Arash
1105-3
Bai, Xia
1110-4
Bayraktar, Harun
3410-4
Bhat, Tanmay
3218-1
Asahina, Yuji
1102-1
Baier, Horst
3105-1
Beams, Ryan
4304-4
Bhattacharyya, Debes
P105-2
Asai, Satomi
4316-2
Bailey, Peter
5104-1
Beauchene, Pierre
2106-2
Biamino, Sara
4412-3
Asano, Kazunori
P104-2
Baillargeat, Jacques
1109-4
Beauson, Justine
3409-4
Bian, Tianya
1117-3,P105-4
Asare, Eric
1302-3
Bailleul, Jean Luc
P102-2
Becker, Ben
2217-2
Bianco-Peled, Havazelet
2220-4
Asgarinia, Soroush
1108-1
Bailleul, Jean-Luc
3309-2
Becker, David
4106-1
Bickerton, Simon
1311-2
Ashcroft, Ian
1211-3
Bailly, Christian
Beckett, Laura
4311-3
Biel, Anders
4214-2
Ashcroft., Ian A
1308-2
4215-3
Bielawski, Andrew
4311-4
2202-3,3116-2
Bainier, Hadrien
Bedsole, Robert
Ashrafi, Behnam
1217-4,1317-2,21144,4114-1 2205-4
1219-3
Bierbaumer, Andreas
1303-2
2102-4
3310-3
Beerhorst, Matthias
Askari, Sadegh
Baiz, Pedro
1320-2
Bilotti, Emiliano
1318-1
1214-1,3304-2
Beger, Anna-Lena
Askri, Ramzi
Bak, Brian
1121-2,1121-3
3321-4
1109-2
Asp, Leif
Baker, Anna
Beguinel, Johanna
Bin, Hong
3221-2
5202-5
4208-2
Asp, Leif E.
Bakis, Charles
Belaïd, Marouane
1302-3,3212-3,32124,5209-2 5119-2
Binetruy, Christophe
1107-2,3107-2,4109-2
3419-3
4211-2
2109-4
Asprone, Domenico
Balazs, Anna
Belec, Lenaik
2220-1
Atilgan, Canan
3116-4
4208-3
3415-3
Birman, Victor
Baley, Christophe
Belec, Lénaïk
1105-4
Atobe, Satoshi
4121-1
5115-4
4417-1
Bisagni, Chiara
Ball, Richard
Belingardi, Giovanni
3319-4
Aubert, Pierre-Henri
P205-9
2214-2
1113-5,4215-2
Bisby, Luke
Ballard, M. Keith
Belkassem, Bachir
3114-1
Auffray, Anthony
4116-3
1304-2,4313-1
P102-2
Biskner, Adam
Balle, Frank
Bellettre, Jérôme
Auler Milani, Marcéo
2212-4
5102-4
3304-4,4207-1
Bismarck, Alexander
Baltopoulos, Athanasios
Belmonte, Enrico
3321-3
1116-4
3206-5,3406-1
Auyeung, Raymond
Bandyopadhyay, Sri
Belnoue, Jonathan
3320-3
2204-1
3403-3
Banik, Jeremy
Ben Kahla , Hiba
Avachat, Sid
2207-2
1118-1
3402-3
Bendickson, Roy
Avgoulas, Evangelos Ioannis Ayad, Rezak
Banys, Juras
4414-1
1101-3,5104-2
Bittencourt, Paulo
Bao, Hongchen
Benedictus, Rinze
1221-1,2102-3,22121,3108-3,3109-3,31171,3208-3,3208-4,33174,3408-3,4102-4,42084,5210-2,5212-4 P104-16
3211-2,P102-18
3218-2
1211-1
Bao, Jianwen
Benelfellah, Abdelkibir
Bittrich, Lars
5108-2
4109-2
1313-3
Bao, Limin
P102-1
1209-2
Bizet, Laurent
Ayadi, Abderrahmane
Bénéthuilière, Thibaut
4117-1
3202-2
Baoyan, Zhang
P103-2
5215-2
Björnsson, Andreas
Ayre, Wayne
Benmokrane, Brahim
3216-3
3110-2
Baran, Ismet
P204-3
1117-5
Blacklock, Matthew
Ayvar-Soberanis, Sabino
Bennani, Bruno
4214-4,4215-1,4317-2
2212-4
Barasinski, Anaïs
1307-1
1213-1,2108-1
Blackman, Bamber
Azambuja, Denise
Bensadoun, Farida
1307-4
1105-5
Barbe, Fabrice
3218-4
3311-3
Blais, Maxime
Azarov, Andrey
Berg, David Christian
4110-4
Barbero, Enrique
3320-2,4213-3
3206-2
Blaker, Jonny
Azarpeyvand, Mahdi
Berg, Rolf
Azevedo, Elaine
P104-16
Barbieri, Ettore
3212-4
Bergamo, Sébastien
1204-4
5206-2
1215-1
Blass, David
Barbin, Raymond
Bergan, Andrew
3117-1,3317-4,41024,5210-2 5101-4
Blonder, Arielle
5119-1
Blum, Jeremias
4113-3
Bobenrieth, Alexis
3312-4
Bocquet , Michel
2120-3
Bergsma, Otto
3203-3,3203-4,4219-5, 4319-4, 5103-1, 51032, P204-6, P204-15 2210-2,4308-4,52023,P103-8 5118-2
1205-4
1111-4
Berggreen, Christian
Blazquez, Antonio
Barfuss, Daniel
Boczkal, Sonia
P204-5
Berlioz, Sophie
5212-5
Bodaghi, Masoud
P102-5
Bernardo, Franco
P203-16
Boddu, Veera
4103-4
Bernasconi, Andrea
Bodjona, Kobye
1218-2
Bodkhe, Sampada
4321-2
Boegle, Christian
4416-4
Bohlin, Jonas
3206-2
Boijoux, Romain
2111-2
Bois, Christophe
1318-1,2117-4,3104-3
Boisse, Philippe
1311-1
Bolan, Brett A.
4415-3
Bololoi, Robert
2220-3
Bond , Ian
B
B. Gosselin, Simon
4209-1
Bargmann , Swantje
2114-3
Baba, Tsuyoshi
2107-3
Barnes, Rosemary
4119-3
Babeau, Arthur
1107-2
Barr, Steve
3116-3
Bacarreza Nogales, Omar 3117-1
Barraud, Elodie
3113-4
Bacarreza, Omar
3117-4
Barroso, Alberto
4214-3,4214-5
Bacharoudis, K. C.
4219-1,5205-4
Barsoum, Z.
4210-5
Bachinger, Angelika
3221-2
Bartsch, Ivonne
3320-4
Bachmann, Benjamin
4113-3
Barut, Atila
3305-1
Bernasconi, Francesco
3418-3,4307-3,51044,5208-3 3114-4
Bachmann, Jens
3218-3,3318-1
Barynin, Vyacheslav
1105-5
Bernhart, Gérard
3416-2
Backe, Daniel
1304-2
Basan, Ricardo
3204-2
Berring, P.
4219-1
Backe, Sebastian
4313-1
Baştürk, Süleyman
5117-4
Berring, Peter
3119-2
Bacova, Petra
2212-2
Basu, Biswajit
4111-1
Berry, Rajiv
3116-3
Bączek, Elżbieta
3413-2
Batalu, Dan
2220-3
Bersee, Harald
3306-1
Badica, Petre
2220-3
Bates, Simon
4411-2
Bertheau, Denis
3218-2,3318-3
Badini, Claudio
4412-3
Batra, Romesh
3103-1,3305-4,4203-2
Bertuoli, Paula
5202-4
Bae, Donghyun
3302-1
Battams, Gary
4315-4
Bettebghor, Dimitri
4105-1
Baek, Bum Ki
P205-7
Battley, Mark
Betti, Andrea
1111-1
Baets, Joris
1108-1,4308-3
Beukers, Adriaan
3220-2
Bond, Ian P.
5106-1,5203-3
Bauer, Constantin
2103-2,4204-2,42043,4304-2,43112,4404-1 4104-1,4211-3
Bagemiel, Oliver
1108-4,1210-3,41032,4319-2 4207-4
Boonlertsamut, Jitlada
1108-3
1208-4
3406-3
4417-1
Baghaei, Behnaz
Bauer, Michael
Beyene, Alem Tekalign
1206-1,P205-5
Boonmawieng, Saowaluk
1108-3
1222-3
2203-1
Beyer, Eckhard
Bagheri, Mohsen
Baughman, Ray Baur, Jeffery
2203-3
Bezerra, Renato
1201-2,4206-4
Boothroyd, Stephen
3312-1
Berglund, Lars
105
//Index of authors Borges De Quadros, Hugo 1303-3
Brown, Nicholas
3301-3
Cantwell, W. J.
4210-5
Chapelle, Lucie
3215-3
Chevallier, Ludovic
3416-2
Boria, Simonetta
4317-4
Bruchon, Julien
1207-2,1307-4
Cantwell, Wesley
Chapman, Lindsay
P205-3
Chiang, Chin-Lung
P105-16,P201-4
Borisova, Alexandra
P105-15
Bruck, Hugh
2121-4,3421-1
3208-1
Chiang, Fu-Pen
3203-2,4203-4
2103-4
Brudzinski, Patrik-Vincent
3109-2
Cao, Liu
Chapple, Steve
Boroujeni, Ayoub
2218-4,3417-1, 4317-3, P102-11, P102-12 3207-3
Chiang, Yu-Chun
P204-13
1214-4
Brunbauer, Julia
3104-2,5208-1
3202-3
4116-2
Borstnar, Gregor
Cao, Zhenxing
Charalambides, Maria
Chiaruttini, Vincent
4118-2
1118-4
Brunel, Jean-Evrard
4217-2
3104-3
1308-4
Bosbach, Björn
Caous, Damien
Chard, Jonathon
2115-2,3114-2
Chiesura, Gabriele
1303-1,3417-2
3312-2,4404-4
Brunet, Thomas
1210-2
3203-1
Charles, Jean-Paul
Bosia, Federico
Caprino, Giancarlo
Chinesta, Francisco
3417-2
Brunner, Andreas
3216-4
3221-5
2209-4
Bossuyt, Frederick
Carbonell, Jorge
Charlier, Quentin
5215-1
Brylka, Barthel
3315-4
3204-3
3413-1
Botelho, Edson
Cardonne, Martin
Charret, Mathieu
Chizari, Kambiz
1316-4,3410-1
Brøndsted, Povl
Chlup, Hynek
P101-7
1107-3
4321-4
4404-2
Carlone, Pierpaolo
Chasiotis, Ioannis
Bou Matar, Olivier
4108-2
4107-1
Carlos, Juan
1112-3
2214-3,3122-2
Cho, Donghwan
Brønmo Johnsen, Bernt
Chattopadhyay, Aditi
Boubakar, Lamine
1309-4,3215-3,34094,4219-2 2114-1
2111-3
4307-1
Botsis, John
Carey, Jason
Charrier, Pierre
1307-1,4209-2,P10210 1103-4
P203-14
1218-3,1218-4
4419-1
Carlson, Tony
1121-2
4203-2
Bouillon, Florent
Brönnimann, Rolf
Chattopadhyay, Arka
Cho, Hyun Jun
3316-1
Bouler, Jean-Michel
2108-2
5212-3
Carlsson, Leif
5103-2
3115-2
Cho, Maenghyo
Bu, Xiaojun
Chatzigeorgiou, George
Carlsson, Leif A.
3203-4
5206-2
2114-2,3210-4
Carraro, Paolo A.
3204-1
4220-3
Bouslah, Mounia
Bull, Daniel
Chehura, Edmon
1109-4
3117-3
Carraro, Paolo Andrea
3106-2,3121-1,3304-3
2219-2
Boustie, Michel
Bullegas, Gianmaria
Chemartin, Laurent
Chocinski-Arnault, Laurence Choi, Jin-Yeong
1109-4
4306-1
2108-2
2213-3
Bouquey, Michel
Bujoli, Bruno
Chawla, Nik
Bowland, Christopher C.
1121-1
3406-4
Carrere, Nicolas
4214-1,4216-4
1214-2
3316-1
Bullen, George
Chemisky, Yves
Choi, Joonmyung
Bovtun, Viktor
P105-15
3208-3
Carrère, Nicolas
3110-3
3204-4
4412-1
Bumbaris, Elias
Chen, Bernard
Choi, Yongbum
Boyard, Nicolas
2106-3
4305-3
Cartie, Denis
4220-3
4111-1
2219-3
Bunea, Mihaela-Cristina
Chen, Biqiong
Chong, See Yenn
Boyd, S W
4415-2
5115-3
Cartledge, Andrew
2104-1
3310-3
1102-6
3419-3
3310-3
4403-3
1316-2
Carvalho, Nelson
Chen, Chao
Chou, Tsu-Wei
Bozza, Anna
4321-1
1111-1
P202-3
1211-4
Carvelli, Valter
Chen, Chengjun
Christ, Mirko
Brack, Narelle
Burgos Costa Do Nascimento, Maria Carolina Burgstaller, Christoph
Chen, Bo-Yang
Chou, M. H.
Braginsky, Michael
1115-2,4218-2
Brampton, Christopher
2205-3 4201-4
Brander, Timo
P101-5
4111-1
Brandes, Jens
5203-3
Brands, Dave
3407-1 5103-3
Branner, K.
4219-1 3119-2,4219-2,4219-3
5213-2
4304-4
Branner, Kim
Catalanotti, Giuseppe
Chen, Ning
1120-2,1120-5
3102-4
3407-1
1207-4
5203-1
Cathelin, Julien
Chen, Shuai
Çınar, Kenan
Bras, Julien
5106-1,5203-3
Cattarinuzzi, Emanuele
1119-3
Cisse, Ousseynou
4107-1
Brauner, Christian
5206-1,P101-9
Böcking, Jan
3207-4
Caty, Olivier
2113-2
3207-3 1119-2
1114-2
Braun, Roman
Chen, Tao Chen, Wayne
Cinquin, Jacques
Büttemeyer, Holger
1205-3,1222-1,21133,2115-3,22071,3307-3 1118-2
1305-1
Cimini, Carlos
Butler, Richard
Castro, Saulo
2220-2
1114-2
4411-3
Chen, Menghao
Ciccotti, Matteo
Buskohl, Philip
4219-2
1109-5,P204-18
Brandt, Milan
Castro, Oscar
Chen, Junlin
P204-19
4111-4
1212-1
Chvojan, Jan
Buskohl, Phil
Castelaín, Marta
P105-3
P202-13
P205-8,P205-11
Chen, Jieng-Chiang
Chung, Wonseok
Buruiana, Tinca
5104-4
4112-2
2219-3
Castagnet, Sylvie
Chen, Haofeng
Chung, Truong Thanh
Buruiana, Emil Constantin P205-8,P205-11
Casciati, Sara
P203-7
P202-4
1120-3
Chen, Guoli
Chung, Tae Young
Burtin, Christian
4111-1
P202-3
Brand, Michael
Casciati, Fabio
Chen, Gang
3214-3
3414-3,4210-3
1303-3
Chudoba, Rostislav
Burman, Magnus
Casarotto, Victor
4221-3
4201-1
4117-3
Chen, Fanlong
Christmann, Marcel
Burke, Andrew
4216-2
1102-3
3318-4
Casari, Pascal
Chen, Daolun
Christke, Sandra
Bréard, Joël
4109-2
3315-4
Cauchy, Xavier
P201-16
1113-4
3205-3
Böhlke, Thomas
Chen, Wei
Claire, Guillebaud
Brecher, Christian
P101-15
5203-4
P105-16
3312-1
Causse, Philippe
Chen, Wei Jen
Clarke, Nigel
P104-16
P101-9
5208-3
4412-3
Breede, Arne
Cavallaro, Alessandro
Chen, Xiang
Claro Neto, Salvador
Chen, Xiuhua
3315-3,4218-3,4403-1
Clausner, Ivonne
5208-4
Breinbjerg, Olav
3119-2
Chen, Xiu-Hua
P203-2
Clegg, Harry
3410-3
Breitzman, Timothy
3116-3,3415-4
Chen, Xuelong
4402-2
Clement, Alexandre
4216-2
Brely, Lucas
3312-2
Chen, Yan
2201-4,P203-12
Cline, Julia
4115-4
Bremer, Claus
3201-4
Chen, Yangyang
P205-18
Cluzel, Christophe
1116-5
Bremer, Jan
1222-2
Chen, Yong
2521-2
Coburn, Broderick
1105-1
Bresson, Bruno
1114-2
Chen, Youming
1210-3
Coccon, Marco Nicolo
3214-5
Breuer, Ulf
3213-4,3221-3
Chen, Yuan
4401-3
Cole, Matthew
3119-3
Breuer, Ulf Paul
4313-1
Chen, Zhi Ming
4205-1
Coleman, Karl
3312-1
Briançon, Christophe
1120-3
Chen, Zhong
3106-1
Collart, Cyrille
1322-3
Briatico-Vangosa, Francesco Bricker, Stephan
3313-3
Cheng, Gengdong
4118-3
Collombet, Francis
P205-2
Cheng, Hui-Ming
1112-2
3107-2
Cheng, Pengcheng
5118-4
Cheng, Xiaoquan
1215-4,1315-1
Cheng, Xinying
3221-4
Cherif, Chokri
1106-6,3307-4
Comas Cardona, Sébastien Comas-Cardona, Sebastien Comas-Cardona, Sébastien Comolli, Lorenzo
Cherng, Ding-Hwa
P105-10
Compston, Paul
3417-4
Chevali, Venkata
3118-1,3218-1
Conrado, Edoardo
4307-3,5104-4,5208-3
Chevalier, Jérémy
2114-4
Coomer, Ray
1115-2,3306-3
C. Joshi, Sunil
3106-1
Cazaux, Guillaume
4109-2
Cadwell, Dave
1320-2
Cebeci, Hülya
5218-1
Cafolla, Janka
P202-14
Cebon, David
1220-3
Cai, Hongneng
2104-3
Centea, Timotei
4206-1,5106-4,5207-4
Cairns, Douglas
3406-3,5214-1
Cerny, Miroslav J.
5103-4
Calabrese, Luigi
4313-2
Ceyssens , Frederik
3209-2
Caldichoury, Inaki
2107-2
Chaallal, Omar
5119-3
Callens, Michaël G.
2211-4 ,4315-3
Chacko Salem, Stanley
1113-1
Callin, Tim
5118-3
Chae, Han Gi
4107-3
Camanho, Pedro
3210-1
Chaffron, Laurent
2102-1,4212-1
Camanho, Pedro P.
5213-2
Chailan, Jean François
2109-4
4218-2
Campos Amico, Sandro
4205-4
Chailan, Jean-François
3415-3
Brockman, Robert
3306-3
Canal, Luis
4111-3
Chaloupka, Alexander
4206-4
Brookbank, Paul
5108-3
Candeau, Axel
1218-4
1113-1,2111-1,4317-1
Cândido, Geraldo M.
3309-1
Broser, Joachim
4106-1
Canino, Marco
1120-6
Chandramouli, Seethalakshmi Chandrasekaran, Swetha
3209-2
Brooks, Richard Brouwer, W.
3205-4
Canisius, Marten
2201-3
Chang, Fu-Kuo
1203-1
Brouzoulis, Jim
5214-3
Cantarel, Arthur
P205-2
Chang, Haiyang
P203-7
3319-2
Cantera, M.asuncion
3416-1
Chang, Seong Jin
P201-7
Brown, Dylan
106
C
3109-3
1312-1
1103-2,3213-3
4109-2 1107-2 3418-3
Index of authors// Coope, Tim
4204-2
Dai, Gaoming
1302-1
Degenhard, Richard
1305-1
Dolata, Anna Janina
P104-7
D’yakonov, Alexander
1103-3
Cooper, Jonathan
3105-2,3205-2
Dai, Shuo
4320-4
Degrieck, Joris
Dolganina, Natalia
4416-2
Dück, Viktor
3213-4
Coppalle, Alexis
3218-4
Dai, Zhaohe
3302-2
4209-2,P102-10
Dyzia, Maciej
4312-1,P104-6,P104-7
4421-1
Dalton, Brendan
4404-3
Deichelsberger, Nadine
Domenech, Luis
Coppola, Anthony
1116-3,3417-2,41212,P101-16 1303-2
Dzalto, Jovana
1208-2
4104-3
Dambrine, Bruno
3206-4
3103-2
P103-5
Coppola, Anthony M
Del Linz, Paolo
Domínguez, Juan Carlos
Dzenis, Yuris
5210-1
4410-3
Damian, Celina Maria
P201-8
P103-5
4309-2
Coppola, Bartolomeo
Del Saz-Orozco, Belén
Donchev, Ted
5106-2
Döbrich, Oliver
1106-6
3117-2
Dan, Koji
2107-3
3416-4
Dong, Anqi
Coq, Marie
Del Solar, Alvaro
Dörsch, Christian
5203-3
4214-3
Dandy, Luke
3309-2
2118-2
1215-4,1315-1
Correa, Elena
Deligianni, Aikaterini
Dong, Gaofeng
P102-5
Dang, Nguyen Hai
P202-8
3410-3
3207-1
Correia, Nuno
Dell’anno, Giuseppe
Dongxiu, Yan
Dangora, Lisa
3411-2
4204-5
1304-1
2621-1
Dell’olio, Mel
Donough, Matthew
Correll, Nikolaus
Doumalin, Pascal
2111-2
Eaton, Mark
3202-2,3219-1
Cortes, Enrique
4209-2,P102-10
Dano, Marie-Laure
3201-5
Dowling, Denis
2109-1
Ebel, Christoph
3311-2,4201-4
Cortez, Juliana
P104-16
Dantras, Eric
4309-4,P203-3
Dranebois, Clemence
P105-2
Eberl, Ludwig
2118-3
Cosmi, Francesca
4307-3
Dao, Buu
5204-3
Dransfeld, Clemens
3313-4,4113-3,4313-4
Ecault, Romain
1109-4
Cosson, Pascal
1117-2
Das, Raj
1210-3
Drapier, Sylvain
Echer, Allison
3116-3
Costa, Ana P.
P105-7
Dashwood, Richard
P202-14
Echtermeyer, Andreas T.
4220-2
Costa, Josep
5218-3
Dau, Frederic
P203-9
1207-2,1307-4,21084,4109-3 1111-3
Edelmann, Klaus
4217-5
Couillaud, Samuel
1109-6
Dauchier, Martine
3206-4
Edmans, Ben
4118-4
Courard, Luc
4410-3
Daugaard, Anders Egede
3102-4
Edwards, Laura E.
4211-3
Courteau-Godmaire, Hubert Coveney, Abigail
5203-4
D’auria, Marco
3313-1
Eggers, Fred
5208-4
Davidson, Barry
1216-3
Cox, Brian
4218-1
Davies, Peter
Crammond, George
4415-2
Davies, Richard
1120-3,3303-1,42141,4216-4 3401-2,3401-3
Crawford, Curran
5205-5
Dávila, Carlos
1215-1
Creech, Gavin
1308-4
Davis, Chelsea
4304-4
Creighton, Claudia
4210-1,5109-1
Daynes, Stephen
1304-4
Cresko, Joe
2101-3
Dazhi, Jiang
4107-4
Croce, A.
4219-1
De Baere, Ives
Crocombe, Andy
4312-3
Crosky, Alan
3414-2
1102-2,1116-3,31104,P101-16 1120-4
Crouzeix, Laurent
P205-2
Cruz, Camilo
4207-1
Cruz, Luís Javier
5218-3
Cueto, Elias
4209-2
Cugnoni, Joël
1316-4
Cui, F.a. Y.
P204-14
Cui, Hong
1110-4
Cui, Linfang
3102-3
Cui, Xiping
4212-4
Cui, Zhenjin
2209-3
Cuillère, Jean-Christophe
P104-19
Cuinat-Guerraz, Nils
3308-3
Cullinan, Jack
4404-1
Cunningham, Paul
4320-4
Curtin, William
4213-2
Curtis, Paul
3314-2
Cyboron, Jolanta
4312-1
4308-1
De Boer, Henk De Camargo Forte, Maria Madalena De Castro, Julia
Delpino Gonzales, Orlando 3303-2 Dendele, Nathalie
P203-3
Deng, Libo
3202-1
Deng, Yinhu
1203-3,4221-4
Dénommée, Stéphane
2202-3
Depreitere, Bart
1310-3
Drean, Jean-Yves
Dermanaki Farahani, Rouhollah Deschères, Isabelle
4102-3
Drechsler, Klaus
Desnoo, Bob
4315-1
Dreiden, Galina
1116-2,3109-2,33112,4201-4,4406-4,52011,5206-3,P101-17 4320-3
Despringre, Nicolas
1214-2
Drinkwater, Bruce
4311-3
Ehlert, Gregory
2203-3
Detwiler, Duane
1314-2
Drissi-Habti, Monssef
1120-1,3419-2
Ehrlich, Andreas
4419-2
Dev, Siddharth
4304-3,5204-4
Drozdzak, Renata
3413-1
Ehrlich, David
3410-4
Devries, Lawrence
1103-2,3213-3
Druesne, Frédéric
5205-2
Ei Said, Bassam
5114-2
Dezellus, Olivier
2102-1,4212-1
Dröder, Klaus
4101-4
Eichenhofer, Martin
3401-1
Di Fratta, Claudio
4106-4,5207-2
Du, Haiyang
4221-3
Eichhorn, Stephen
1111-5,4308-1
Di Maio, Dario
3220-3
Du, Lei
4202-2,5212-1,5212-3
Eifler, Dietmar
1304-2
Di Maio, Luciano
4410-3
Du, Rong Hua
3216-2
Ekermann, Tomas
3111-4
Di Modica, Pietro
3318-1,3318-2
Du, Shanyi
Ekh, Johan
3414-3
Di, Zhang
P205-12
3107-2
Diao, Hele
3117-1
Du, Xusheng
El Azzouzi, Khalid
4205-4
1114-1,1321-2,31094,4111-2,P204-10 2116-3 4112-4,P103-13
4208-2
Duan, Zunyi
4105-4
El Malki, Aboulghit
1113-3
3217-4
1110-3
Duan, Xuecheng
El Hafidi, Ali
1108-1,3204-3
El Said, Bassam
4118-1
4308-1
Dubé, Martine
4102-3 3312-4
El Wazziki, Mohamed
3107-4
El Yagoubi, Jalal
P105-5
Elias, Adrien
4416-1
Eliasson, Veronica
3303-2
Elliott, James
3116-4
Ellis, Gary
1212-1
Elllis, Gary
4108-3
Elmarakbi, Ahmed
P201-6
Elsafty, Adel
5215-2
El-Saikaly, Georges
5119-3
Elyada, Alon
4405-1
Emami, Anahita
2103-4
Emmelmann, Claus
1318-3,2201-3
Emonts, Michael
5206-2
De Clerck, Karen
1102-2,3110-4
Diaz Rodriguez, Luis Antonio Díaz Calderón, Paulo
De Clercq, Geert
P101-16
Dicker, Michael
2103-2
Dube, Martine
De Fazio, Piero
P203-16
Dickinson, Benjamin
3121-3 P103-14
Dubois, Philippe Dubost, Elise
1209-2
De Focatiis, Davide
E
4206-3
Dieringa, Hajo
1209-2
De Kanter, Jens
1120-4
Dietrich, Franz
4101-4
Duchet-Rumeau, Jannick
De Luca, Francois
4102-4
Dietrich, Stefan
2213-2
Duchoslav, Jiri
3209-3
De Luycker, Emmanuel
1216-2
Dijkstra, Dirk-Jacques
4413-3
Duddeck, Fabian
1305-4 5108-4
De Monte, Matthias
3304-4,4207-1
Dilger, Klaus
3320-1,4101-4,5101-4
Duflot, Marc
De Nicola, Felice
3219-4
Dimasi, Elaine
3308-4
Dufort, Laurent
3207-1,3207-2
De Pauw, Ben
1303-1
Ding, Ning
3402-1
Dufour, Clement
5118-3
De Schoenmaker , Bert
1102-2
Ding, Yuanyuan
2110-1,P203-13
Duhovic, Miro
2107-2 4415-2
De Silva, Karnika
P105-2
Dinh Chi, Pham
4118-4
Dulieu-Barton, J M
De Silva, Rangika Thilan
4202-3
Diniz Melo, José Daniel
5115-3
Dulieu-Barton, Janice
1204-1,4315-4,4420-1
2212-4
Dinzart, Florence
5211-3
Dumas, David
3206-1,4114-1
Djukic, Luke
P101-2
Dumont, Marie-Josée
3308-3
Cysne Barbosa, Ana Paula 5115-3
De Sousa Basso, Nara Regina De Souza, Mandy
Endler, Ingolf
P101-8,P10113,P101-15 4412-2
2210-1
De Vasconcellos, Davi
3313-1
4213-5
1213-2,1313-2,4408-2
Czel, G
Dlugosch, Michael
Dumont, Pierre
3221-1
Endo, Atsushi
P101-6
3317-1,3317-2
De Vicente Sugue, Rocio
3318-3
5214-2
Dunn, Martin
Czel, Gergely
Do, Bao-Chan
1307-1
Endruweit, Andreas
1207-4,4206-3
4219-1
3307-3
Dupillier, Jean-Marc
De Winkel, G.
Dodwell, Tim
P105-19 3207-4
Doi, Taisei
4312-4,P102-13 4118-2
3419-3
4218-2
Doitrand, Aurelien
Durante, Massimo
Engel, Nick
Dear, John P.
3103-2,4116-2,42151,4317-2 4110-2
5106-1
Engel, Bernd
Dear, John
Doersch, Christian
Duplessis Kergomard, Yann Dupont-Gillain , Christine
Enebro, Jonas
1217-2
2207-1
3207-2
Dean, Aamir
Dodwell, Timothy
1322-3
Decarlo, Francesco
2213-3
P204-5
4114-4
Engels, Alexander
Dolata, Anna
Durville, Damien
Dedieu, Cyril
1307-1
P104-6
4405-1
4416-4
Dolata, Anna J.
Dutour Sikiric, Maja
Engel-Watzek, Sindy
Dutra, Thiago
1305-3
Engisch, Lutz
4205-3
Enrione, Javier
4308-1
D
Daelemans, Lode
1102-2,3110-4
Daghia, Federica
1116-5
Dahmann, Peter
1222-3
Dai, Chengqin
3202-3,3402-1
Dai, Fuhong
P204-2
4210-1
1309-3
107
//Index of authors Epurescu, George
P205-11
Feldhusen, Jörg
1320-2
Frostig, Yeoshua
4203-1,4210-2
Erber, Andreas
3109-2
Feldmann, Titus
3314-4
Främby, Johannes
5214-3
Erland, Samuel
2207-1,3307-3
Felippa, Carlos A.
4318-1
Fröse, Erwin
5203-3
Ermanni, Paolo
Feng, Bin
3407-3
Fu, Qiliang
P103-8
Feng, Jian
P104-11
Fu, Ying
P102-19
Feng, Kan
3120-3
Fu, Yucan
2201-4,P104-15
Feng, Lina
5203-2
Fuchi, Kazuko
4411-3
Escobar, Enrique
3114-4,3401-1,34052,4106-4,44181,5207-2 1314-3,5203-1,P20117 P205-13
Fenghui, Shi
P103-2
Fuellbrandt, Marieke
2109-3
Espinosa, Christine
5117-3
Fergusson, Alexander
3103-2
Fuentes, Carlos
1309-3,2108-4
Etches, Julie A.
1319-2
Fernandez Villegas, Irene
Fuertjes, Tobias
4117-2
Evangelisti, Sara
3308-1
2202-4,P202-6
2111-4
Fernandez, Juan C.
Fujii, Tomoyuki
Evans , Ken
1101-1,1101-3,11016,1318-2,3306-1 1102-4
5108-3
5206-3
1111-1
Evans, Anthony
Fernandez, Ruben
Fujii, Toru
1302-3
2204-2,2206-1
1302-4
Evans, Jamie
Fernberg, Patrik
Fujita, Yuya
1104-4
3202-2
3213-1
Fujita, Yuzo
Evans, Samuel
Fernberg, Patrik Sven
3119-3
1306-1
4105-2
Evans, Simon
Fernlund, Göran
Fukui, Hayato
3308-4
4213-3
4121-1
Evans-Lutterodt, Kenneth
Ferrante, Luca
Fukunaga, Hisao
2210-1
4304-2
1313-2
Fuller, J D
Everitt, Daniel
Ferré Sentis, Dimitri
5115-4
1305-3
3217-1
Evernden, Mark
Ferreira, Clovis
Fuller, Jonathan
2115-2,3114-2
P105-7
4405-1
Eyer, Gabriel
Ferreira, Paulo
Furedi Milhofer, Helga
Ferrier, Emmanuel
1208-3
Furukawa, Kenichi
3407-4
Fetfatsidis, Konstantine
4117-3
Furukawa, Yoshio
3304-1
Fideu, Paulin
1322-2
Furuya, Akira
2214-4
Fiebig, Sierk
4205-2
Fürst, Andreas
1206-1,P205-5
Fiedler, Bodo
Fürst, Christian
3209-3
Ersoy, Nuri
F
108
Garakani, Mohammad 1212-2 Akbari Garcea, Serafina Consuelo 3122-1 García, Ana M.
4108-3
Garcia, Santiago
4404-2
Garcia, Vanessa
1112-3
García, Victor
4209-2,P102-10
García-Galindo, Francisco 2208-1 De Paula Gardiola, Bruno 2102-1 Gardner, Jared
4305-1
Garg, Mayank
4204-4
Garthaus, Christian
1111-4,5101-3
Garti, Nissim
4405-1
Gartstka, Tomasz
2106-4
Garza, C.
3120-1
Gasior, Pawel
4120-1
Gastaldi, Dario
1119-3
Gaudenzi, Paolo
4213-3,4413-2
Gautam, Mayank
3217-2
Gawish, Samiha
P105-11
Ge, Dongyun
P103-20,P202-1
Ge, Yangyang
1216-2
Geerinck, Ruben
P101-16
Geers, Marc
3216-1
Geiger, Jeffrey
P205-13
Geissberger, Roman
4313-4
Gibson, Geoff
3318-1,3318-2,3318-4
Giger, Lian
4113-3
Gigliotti, Luigi
3122-3
Gil, Lluís
4318-1
Gili, Jacopo
3420-2
Gillespie, Jr., John W.
3313-2
Gilman, Jeffrey
4304-4
Gimenez, Alberto
P205-15
Girardot, Aurore
3404-3
Girardot, Jeremie
P203-9
Giraud, Isabelle
4309-4
Giuliese, Gregorio
2120-4
Gizik, Daniel
1106-2
Glen, Liam
2113-3
Glock, Susanne
4111-3
Glud, Jens
1204-1
Gmür, Thomas
1316-4
Gnaniah, Sam
2106-4,P205-3
Gning, Papa-Birame
4208-2
Goda, Koichi
1308-1,2214-4,3404-1
Goedemé, Toon
1208-1
Goering, Jon
3410-4
Goethals, Frederik
4401-1
Gohs, Uwe
1211-1,4221-4
Gómez-Fatou, Marián
1212-1
Gomina, Moussa
4109-2
Gong, Lei
3112-1
Gong, Shijin
4208-1
Gong, Xiaobo
4221-2
Gong, Xiaojing
1216-2
Gong, Yu
1316-1
Gonzalez, Carlos
1207-3
González, Carlos
3214-1
Gonzalez, Emilio V.
4416-3
González-Cantero, Juan Manuel Goo, Nam Seo
3215-4
Gorbatikh, Larissa
Fagerström, Martin
5214-3
Fagiano, Christian
3110-3,4118-2
Fahr, Philipp
1318-4
Faisst, Birgit
5208-4
Fino, Paolo
1118-4,1204-2,12143,1312-1,1314-4 4412-3
Fajun, Yi
2119-3
Fiore, Antoine
2218-2
Gadow, Rainer
3108-1
Geistbeck, Matthias
2219-1
Falcinelli, Giada
4417-1
Fiore, Vincenzo
4313-2
Gaebler, Simone
5206-4
Gelbrich, Sandra
4419-2
Falkenberg, Paul
4205-2
Fischer, Fabian
3320-1,4101-4,5101-4
Gaffet, Eric
3113-4
Gencarella, Francesca
1108-5
Falzon, Brian
1114-3,1307-2
Fischer, Guillaume
1114-2
Gagne, Martin
P201-16
Geng, Lin
4112-3,4212-4
Fan, Genlian
4112-1,P103-10
Fischer, Hartmut
4204-2
Gair, Jeffrey
4305-1
Gengenbach, Thomas
2109-2
Fan, Guohua
4212-4
Fischer, Kai
P101-13
Gaitonde, Martin
5205-1
Genin, Guy
2220-1
Fan, Tongxiang
P103-19
Fitoussi, Joseph
1214-2,2120-3,P202-5
Gaitzsch, Robert
5206-1
Genna, Silvio
5117-4
Fan, Yujiao
4302-4
Fleet, Elliot
5204-2
Gakwaya, Augustin
3201-5
George, Andrew
2114-2
Fang, Fang
1321-3
Fletcher, Timothy
2115-3
Galan-Marin, Carmen
2208-1
Georges, Frank-David
2218-3
Fang, Guodong
5114-2
Fliegener, Sascha
3115-3
Galappaththi, Udayanga
5118-1
Georgiades, Tasos
1103-1,1103-5
Fang, Lin
3407-3
Fontaine, Stéphane
2218-2,4208-2
Galateanu, Bianca
4305-3
Georgiou , Ioannis
4303-2
Fang, Minghe
1112-2
Foreman, Joel
1215-3
Galiotis, Costas
3212-2,P201-9
Gérard, Jean-François
Faria, Hugo
1305-2,2117-1
Formica, Giovanni
P205-10
Galkin, Siegfried
1115-5
Farinas, A. B.
4219-1
Fortea Verdejo, Marta
3208-3
Gallana, Isaias
3308-4
Gerard, Pierre
1109-2,1114-2,12092,2209-4 1109-2
Gordnian, Kamyar
2102-2,2202-2,22114,3209-2,3222-2,33173,4213-4,4315-3 2107-1
Farkas, Laszlo
1317-3
Fortin Simpson, Jeffrey
4217-1
Galland, Griselda Barrera
2212-4
Gereke, Thomas
1106-6
Gornet, Laurent
1117-1,1117-2
Farrow, Ian
4411-2
Foster, Stephen J
3319-1
Galos, Joel
1220-3
Gergely, Ryan
4421-1
Gortner, Florian
4101-2
Farsadi, Touraj
2204-4
Fostsing, Edith-Roland
5203-4
Galucio, Ana Cristina
4215-4
Gerhardt, Rosario
1108-5
Gosselin, Frederick
4321-2
Farshidi, Arash
3203-3
Fourel, Julie
P105-5
Galvanetto, Ugo
3214-5
Gersborg, Allan Roulund
4406-3
Goto, Akihiko
2101-1,P101-6,P102-9
Fastert, Claus
1322-2
Fox, Bronwyn
2109-2,4210-1,5110-1
Gamelas, José
P105-7
Geubelle, Philippe H.
5111-1
Goto, Keita
4114-2
Faul, Charl
2103-2
Fox, Bronwyn L.
5109-1
Gamstedt, Kristofer
1213-2,2114-2
Geyer, Anne
3420-1,4110-1
Goto, Ken
Fauster, Ewald
Franceschi, Sophie
4309-4,P203-3
Ganesh, Raja
3313-2
Ghaffarimejlej, Vahid
P204-1
François, Vincent
P104-19
Gang, Shi
4107-4
Ghajari, Mazdak
5117-1
Goto, Kimiya
4119-2,4316-2,P10414,P204-9 1302-4
Favvas, Evangelos
3111-3,3311-3,34062,4106-3 P202-9
Gannon, Sam
2116-2
4217-3
Goto, T.
3213-2
3219-1
3205-3
Ghayoor, Hossein
Featherston, Carol
Francois-Xavier, Kromm
Gans, Adam
1222-4
4104-4
Goto, Teruya
2119-1
5204-1
4205-2
Ghazali, Habibah
Fedonina, Yelizaveta
Franke, Thilo
3313-3
2111-4,3401-2
Gotor, Francisco José
1110-3
3205-4
1203-3
Ghita, Oana
Fedorenko, A.
Gao , Shang-Lin
Frenzel, Ray
4410-1
3202-4,3202-5
Gourdet, Sophie
2102-1,4212-1
3205-4
P201-18
Ghorbani, Kamran
Fedulov, B.
Gao, Hang Gao, Jiefeng
2116-3,3302-3
Goutianos, Stergios
3216-5
3107-1
4216-2
4206-3
Fedulov, Boris
Freour, Sylvain
Ghose, Sayata
Gao, Jing
3319-4
4211-1
Gower, Michael
1322-1,2106-4,P205-3
3118-1,5103-3
1101-4,1107-4
Ghosh, Somnath
Feih, Stefanie
Freund, Andreas
4213-5
3102-4
Govignon, Quentin
3416-2
1218-3,4115-3
4112-4,P103-13
Giacinti, Marco
Feissel, Pierre
Gao, Qi
Fritsen, Peter
1113-6
3219-3,4204-2
Graciani, Enrique
3215-4
P101-1
4221-4
Giannis, Stefanos
Feito, Norberto
Gao, Shanglin
Frossard, Guillaume
1316-4
Gao, Yuanyuan
4212-4
Giannopoulos, Ioannis
P201-20
Grail, Gael
3117-1,3117-2,4113-1
Frassine, Roberto
Fritsch, Jens
G
P203-19
Index of authors// Grammatikos, Sotirios
5115-4
Gupta, Raju
4203-5
Hansen, Jens Zangenberg 1119-5
Heinze, Thorsten
5112-4
Hoefnagels, Johan
3216-1
Graupner, Nina
2210-3
Gupta, Satyandra K.
3421-1
Hansen, Lennart
1113-6
Hekner, Bartosz
P104-3,P104-5
Hoefnagels, Johan P. M.
1119-3
Grave, Jon Harald Lambert Greenhalgh, Emile
4220-2
Gurka, Martin
Hansen, Peter
2201-2
Helbig, Frank
3211-3,P202-16
Hoey, Justin
3121-2
1221-1,2102-3,5212-4
Guruprasad, P. J.
3213-4,3221-3,42211,5116-2 2216-2,3415-2
Hansen, Ragnar
4319-1
Hello, Gaëtan
4114-4
Hoffman, Joe
P203-15
Greisel, Michael
1109-1,1209-4,5101-2
1102-4
2103-3
Hellström, Peter
3307-4
Hao, Bin
2103-1
Hoffmann, Marco
3314-1
1311-1
Hao, Jian
1321-4
Hellström, Thomas
P204-18
3101-4
3115-3
Hao, Jianwei
Helmus, Rhena
Hohe, Jörg
Griese, Michael
1220-4,2218-3,31112,4117-2 3320-1
3221-2,4311-1,52143,5217-2 3206-2
Hoffmann, Gerald
Gries, Thomas
5218-1
Hao, Lifeng
3202-3,3402-1
2109-2
4101-1,4217-2
4106-2
Henderson, Luke
Hojjati, Mehdi
Grieser, Timo
Guzman De Villoria, Roberto Guzman-Maldonado, Eduardo Gürkan, Idris
Hansen, Reinack
3118-2
Gözcü, Mehmet Ozan
2204-4
Hao, Yong
4403-1
1208-1,2108-3,4308-3
1114-5,2116-1,5104-3
Grigoriou, Katherine
Hendrickx, Kevin
Hojo, Masaki
3408-2
5119-1
Hao, Yue
1109-5
4209-4
Hojo, Toshihiko
Grobman, Yasha
Henning, Frank
4220-3
Hara, Eiichi
P205-1
2207-2
5219-1
Groenendijk, Chris
Henry, Eric
Hokura, Atsushi
2213-1
4417-3
1116-2
Grogan, David
Hepples, Warren
Hombergsmeier, Elke
3106-3
2113-2
1110-5
Groh, Fabian
Herbreteau, Mathieu
Hong, Changqing
P205-7
3205-5
2102-3
Hong, Jun Pyo
Groh, Rainer M J
Herceg, Tomi
4405-1,4405-2
1218-1
3219-2
Grohmann, Steffi
Hermsdorf, F.
Hong, Seung-Chan
1106-3
P103-4
4402-1
Grohmann, Yannis
Hernandez, Ricardo
Hong, Soon Hyung
P205-7
4304-4
3308-4,P205-13
Hong, Soon Man
Grolman, Danielle
Herrera, Steven
3113-4
1102-4
1102-1
Grosdidier, Thierry
Herrera-Ramirez, Luis C.
Hongo, Chizuru
P104-5
1211-4
3103-3
Grosman, Franciszek
Herrmann, Axel
Hoo Fatt, Michelle
3307-4
1118-2,P101-9
5209-3
Großmann, Knut
Herrmann, Axel S.
Hoong, Kok
3103-2
3201-3
5206-1
Hooper, Paul
Grouve, Wouter
Herrmann, Axel Siegfried
1101-6
1316-3
1115-4
Grouve, Wouter J. W.
Herwan, Jonny
Hoos, Kevin
2117-3
3205-3
4415-3
Groves, Roger
Hervé, Wargnier
Hoos, Kevin H.
3308-4,P205-13
2216-3
3311-2
Grunenfelder, Lessa
Herwig, Tillmann
Horn, Bernhard
P205-2
3308-1
Horn, Siegfried
Grunevald, Yves-Henri
Hervy, Martin
Grössing, Harald
3311-3,4106-3
Herzog, Dirk
2201-3
P205-12
1305-4
Horn, Siegfried R.
Gu, Jiajun
Hesse, Simon
1109-1,1209-3,12094,3309-4,4310-1,44101,5101-2,P102-14 1110-2 4108-1
4402-3
5206-4
Hornblow, Benjamin
Gu, Yi Zhuo
Heuer, Henning
5101-2,P102-14
3412-1
4213-5
Horny, Robert
Gu, Yizhou
Hiermaier, Stefan
4202-1,4302-4,4403-3
4215-4
Horoschenkoff, Alexander 1303-2
Gu, Yizhuo
Hild, François
5202-2
2104-4,3119-1
3319-3
Hillborg, Henrik
Horst, Peter
Guaderrama, Lucas
1121-6 P204-8
Hoshi, Hikaru
2115-1
Guan, Jingwen
Hilton, Harry Hinds, Kirsten
Hosoi, Atsushi
1104-4,2120-2
Hine, Peter
1213-4,4307-3,5208-3
Hosomi, Takahiro
P102-9
Hineno, Shoji
4201-3
Hosoya, Ryohei
1313-1
Hinterhoelzl, Roland
1211-2,1318-4,3101-4
Hossain, Mokarram
3115-2
Hinterhölzl, Roland
1306-2,3217-3
Hosseini, Nassibeh
4408-1
Hinton, Mike J.
3322-1
Hosur, Mahesh
3403-2,4203-5
Hira, Hirohito
4301-1
Houba, Michel
4207-3
Hirakawa, Yuichi
P103-3
Hoydonckx, Hans
3318-1,3318-2
Hirano, Yoshiyasu
2119-1
Hruby, Peter
2213-3
Hirashima, Tei
3111-1
Hu, Jiandong
P103-15
H
Ha, Jung-Chan
3213-3
Harada, Satoshi
3408-4
Haack, Matthias
1318-3
Hardie, Russell
4218-2
Haase, Nino
P102-14
Haring, Frederik
3121-2
Haddad, A. Manu
3119-3
Harkin-Jones, Eileen
3212-1
Haddad, Madjid
2106-2
Harmandaris, Vagelis
2212-2
Hadden, Cameron
3316-3
Harper, Lee
1207-4,5108-3
Hadjiloizi, Demetra
1103-1,1103-5
Hart, Kevin
4421-1
Haeske, Marcel
4117-2
Harthong, Barthélémy
4408-2
Hagberg, Johan
1221-3
Hartl, Anna
4207-5
Haghi Kashani, Masoud
P201-14
Hartl, Stefan
3305-2
Hajdaei, Amirhossein
3219-3,4204-2
Hartmann, Mathias
1306-2
Hajian, Alireza
4308-4
Hase, Kentaro
P102-9
Hakansson, Eva
4216-5
Hasegawa, Kenichi
5201-3
Hale, Jack Michael
2118-2
Hasegawa, Tomohiro
P202-6
Hallander, Per
1306-3
Haselbach, Philipp Ulrich
4219-3
Hallet, Stephen
1216-1
Hashimoto, Kouji
P201-10
Hallett, Stephen
Hashizume, Ryosuke
1114-5
Haspel, Benedikt
3115-3
Hassager, Ole
3102-4
Hallett, Stephen Richard
1104-2,1203-2,21162,3206-5,3210-3,33104,3314-2,3406-1,41181,5114-2 1316-1
Hata, Katsuhiko
1302-4
3116-2
Hallonet, Anne
1208-3
Hatori, Shinya
3101-2
Guan, Zhidong
1114-1,1117-3,P105-4
Hallström, Stefan
4320-1
Guan, Zhongwei
2218-4,4317-3,4318-3
Hatta, Hiroshi
4119-2
Gude, Maik
1110-2
Hauptmann, Jan
1206-1,P205-5
Hausmann, Joachim
2107-2
Guessasma, Sofiane
1313-3
Hay, Randy
4218-2
Guglhoer, Thomas
2206-3
Hamed, Ehab
1108-3,2101-1,22083,3101-1,3214-2,34084,P101-6 3319-1,4210-2
Haug, Simon J. A.
Gude, María R.
1101-4,1107-4,11114,3104-4,4421-2 1112-3
1106-5,3111-4,34123,4114-1,4210-3 3218-2
Hatta, Hirhoshi
1311-1
2206-4
4107-1
Hamila, Nahiene
Hayashi, Satoshi
Guicheret-Retel, Violaine Guigon, Camille
2111-2
Hamilton, Andrew
3212-1
Hayashi, Takahiro
Guijun, Xian
5119-2
Hamilton, Jesse
5204-4
Guinard, Stéphane
5117-3
Han, Fei
5111-3
Hayes, Simon
1220-2,5201-3,P20111,P202-7 4406-2
Hirayama, Norio
2120-2
1310-2
Guiqiong, Jiao
1105-6
1114-1,1117-3,P105-4
5204-2
Hu, Lingling
Han, Geng
Hayes, Simon A.
Hirokawa, Jun-Ichi
5104-3
2111-1
Gulgunje, Prabhakar
4107-3
3414-1
1105-2,3103-2
Hu, Shoufeng
Han, Heung Nam
Hayman, Brian
Hirose, Yasuo
1311-4
P202-12
Guloglu, Gorkem E.
5109-4
3219-5
3314-2
Hu, Wenjun
Han, Jae-Hung
Hazzard, Mark
Hiroshima, Noboru
4119-2
1210-1,4102-2,P103-6
Gun’ko, Vladimir M
1309-1
4102-1
1312-4
Hu, Xiao
Han, Jinhua
He, Lihua
Hirsekorn, Martin
4118-2
P103-9
Gunnion, Andrew
1304-1,3204-4
P203-2
1113-4
Hu, Xiaoshi
Han, Kun-Hua
He, Minghua
Hivet, Gilles
2106-2
P203-6
Guo, Bing
5212-1
2207-2
1117-3
Hu, Xing
Han, Sejin
He, Wei
Hjørnet, Niels
4319-4
5212-2
Guo, Haoyu
1309-3
3211-1
3402-1
Hu, Yang
Han, Sungjin
He, Yafei
Hoa, Suong
4217-1,5106-2
2113-3
Guo, Licheng
5116-3
3402-2
4311-2
Hua, Shi
Han, Xiao
Heath, Callum
Hoa, Suong V.
4217-2,4217-3
Guo, Qiang
4112-1
4312-2
1301-4
Huaman-Mamani, Fredy A. P102-15
Han, Yuanfei
Hedin, Kevin
Hoa, Suong Van
4304-1
Huang, Farong
4202-2,5212-1,5212-3
4312-4
4403-4
4118-4
Hanabusa, Takao
Hedlund, Johan
Guo, Tianfu
Hoang, Minh Duc
4217-1
4312-2
Guo, Xintao
4116-2
4406-2
4409-3
Huang, Guangfa
Hand, Russell
Heil, Joseph
Hobeck, Jared D.
3321-2
4103-3,P205-18
Guozhan, Jiang
5209-1
4313-1
3210-2
Huang, Guoliang
Hannemann, Benedikt
Heimann, Paula
Hochard, Christian
2115-2,3114-2,3404-3
2214-1,4112-3
Gupta, Kishor
4107-3
1211-2
3417-3
Huang, Lujun
Hans, Thorsten
Heinecke, Falk
Hodzic, Alma
2104-1,2211-1,31102,5204-2
2113-1
4117-3,4304-3,5204-4
1211-1,4221-4
Huang, Ruoxuan
Hansen, Christopher
Heinrich, Gert
Huang, Sam
P201-19
Halm, Damien Hamada, Hiroyuki
109
//Index of authors Huang, Shaojuan
4115-3
Ikenobo, Yuki
3101-1
Jeancolas, Antoine
5211-3
Jones, Arthur
1113-1,3107-3
Karimi, Parvin
Huang, Tao
1110-1
Ilsted Bech, Jakob
3409-4
Jeelani, Shaik
3112-3,3403-2,4203-5
Jones, Eric
4218-2,4415-1
Karlsson Hagnell, Mathilda 2101-2
Huang, Xiao
4315-1
Imamura, Tatsuya
1115-6
Jeliazkov, Momchil
3405-1
Jones, Frank
5204-3
Karolus, Małgorzata
4312-1
Huang, Xicheng
P202-3,P202-12
Imbault, Didier
4408-2
Jenkins, Peter
4309-1,5110-2
Jones, Nicholas
3120-4
Kastner, Johann
1213-4
Huang, Yen-Chang
3418-2
Incarnato, Loredana
4410-3
Jennings, Matt
4210-1
Jones, Tyler Paul
2114-1
Katano, Masato
P203-4
Huang, Yudong
3302-3
Inman, Daniel
Jennissen, Herbert P.
4405-1
Jonnalagadda , Avinash
3405-3
Katayama, Shinsuke
5112-1
Huang, Zhengming
P201-13
P204-8
Jonsson, Marie
4117-1
Katayama, Tsutao
P105-9
1114-4
Inoue, Yoku
Jensen, David W
Huang, Zheng-Ming
2121-2,2621-2,33211,3321-2 2202-4,4213-1,4302-1
Joo, James
4121-4,4411-3
Katsarou, Lydia
P103-14
P201-8
4217-2
3316-1
Hubca, Gheorghe
Ioachim, Octavian
Jeong, Euigyung
Joosten, Mathew
2218-1,3216-3
Katunin, Andrzej
P205-4
Iovu, Horia
P201-8
Jeong, Su-Gwang
P201-7
Joshi, Prabij
2115-1
Kaufmann, Joerg
4205-3
Ipatov, Mihail
3221-5
Jerabek, Michael
1213-4,4207-5,5108-1
Julien, Cédric
4105-1
Kaufmann, Markus
3417-2
Huchette, Cédric
1107-5,2203-2,22062,3101-4,3308-3,34091,4210-4,4406-1 2219-2
P205-11
3213-3
Hubert, Pascal
Ion, Ioana
Jeong, Gyu-Sang
Irisarri, François-Xavier
3110-3,4105-1
Jespersen, Kristine Munk
1119-5
Jun, Chai
P102-8
Kawabe, Kazumasa
P101-19
Hudspeth, Matthew
1119-2
Irvine, Derek
2220-2
Jesson, David
1308-4
Juric, Aleksandar
P101-20
Kawada, Hiroyuki
1104-4,2120-2
Huelsbusch, Daniel
1318-3
Isaksson, Per
1213-2
Ji, Alin
1110-4
Just, Gordon
3104-4
Kawagoe, Makoto
3302-4,4207-2
Hufenbach, Werner
5101-3
Ishibashi, Masaru
2119-1
Ji, Zhaojie
1114-1,1117-3,P105-4
Justo, Jesus
1205-4
Kawai, Masamichi
2204-3
Hufenus, Rudolf
4201-2
Ishida, Osuke
5201-5
Jia, Jingjing
2116-3
Jürgens, Michael
1116-2
Kawamoto, Kiichirou
4201-3
Hughes, Darren
P202-14
Ishida, Yuichi
2119-1,P204-11
Jia, Li
P103-2
Jørgensen, Rolf
3119-2
Kawasaki, Yusuke
4114-2
Hughes, Jon
2106-4
Ishikawa, Masashi
4320-1
Jia, Lijie
3306-2
Kawashita, Luiz
2114-1,3219-1
Hugon, Michael
4220-3
Ishikawa, Takashi
3201-2
Jia, Xiaolong
5102-2
Kawazu, Tomoe
P102-9
Huh, Young Cheol
P202-4
Ishikawa, Takeshi
2101-4
Jia, Yongzhen
1110-4,3207-3
Hui, Li
5119-2
Islam, Md. Ekramul
3403-2
Jia, Yuming
Huifeng, Tan
3421-3
Ito, Hirokazu
3404-1
Humeau, Corentin
3303-1
Ito, Kanta
2208-3
Hung, Chien-Yuan
P204-13
Ito, Yoichi
P202-6
Hurdelbrink Ii, Keith R.
5109-4
Itou, Shouji
2119-1
Hurez, Anita
1216-2
Iwahori, Yutaka
3306-4,P205-1
Huson, Mickey
2109-2
Iwan, Sebastian
3411-1
Hussaini, M Yousuff
5111-2
Iwanaga, Kentarou
P101-3
Hwang, Hui Yun
P205-19
Ivanov, Dmitry
Hwang, Hyun-Sik
1121-1
3206-5,3406-1,41181,4418-2,5114-2 P204-9
Hwu, Chyanbin
3102-2
Iwata, Minoru
Hübler, Moritz
3221-3,5116-2
Ivens, Jan
Hübner, Matthias
1106-6
Hühne, Christian
1219-3,1319-3,3106-3
Hümbert, Martina
1101-2
Hyodo, Takehiko
1301-3
Häfliger, Kathrin
4201-2
Hörberg, Erik
3206-2
Hörrmann, Susanne
1104-3
Høyning, Bjørn
4319-1
I
110
Iannace, Salvatore
3313-1,5213-1
Iannucci, Lorenzo
3314-2,5117-1
Iarve, Endel
1115-2,1115-4,3410-2
Ibañez, Manuel
P205-15
Ibarretxe, Joana
P103-4
Ichikawa, Daiki
5213-3
Idapalapati, Sridhar
P202-8
Idapalapati, Sridhar
P202-19
Ifju, Peter
3405-3
Igawa, Hirotaka
3306-4
Ihde, Jörg
P101-12
Ihrner, Niklas
1221-3
Ii, Shingo
1313-1
Ikeda, Tadashige
3201-2
J
1208-1,1310-3,33173,P101-16
K
1108-5
Kaboglu, Cihan
4110-2
Kay, James
1306-1
4215-1
Kaburagi, Tetsushi
3111-1
Kayran, Altan
2204-4
Jiang , Dazhi
1202-3,1302-2
Kaddour, Sam
3322-1
Kazakov, Mark
P105-8
Jiang, Cai
1202-3,1302-2
Kadlec, Martin
1202-2
Kazancı, Zafer
5117-4
Jiang, Ning
5115-1
Kageyama, Kazuro
3104-1,3314-3
Kazem, Hamid
3319-3
Jiang, Xiaowei
P203-6
P101-9
Kazmi, Monis
4109-4
Jianwei, Mao
P101-14
Kealy, Paul
3105-2
Jianwei, Zhang
4107-4
Kahali Moghaddam, Maryam Kai, Uhlig
3202-3,3402-1
2211-1
P202-14
Jiao, Weicheng
Kaka, Diyar
Keating, Elspeth
5108-2
P104-13
4101-3
Kebir, Hocine
Jiao, Xingjian
Kako, Jan Christoph
P201-15
1119-1
3315-4
Jiazhen, Zhang
Kalafat, Sinan
Kehrer, Loredana
4408-4
1108-5,1109-3
3313-4
Jimenez, Mateo
Kalaitzidou, Kyriaki
Keller, Andre
Kalamkarov, Alexander
1103-1,1103-5
Keller, Thomas
3217-4
Kaleta, Jerzy
4120-1,4421-2
Kelly, Don
3414-2
Kalinka, Gerhard
5210-2
Kelly, Mark
3103-2
Kalista, Stephen
5204-3
Kelly, Piaras
1311-2
Kallweit, Stephan
1222-3
Kempa, Martin
P105-15
Kalnins, Kapsars
5118-3
Kennedy, Joshua
2203-3
Kalnins, Kaspars
1305-1
Kento, Okuyama
3309-3
Kaltenbacher, Manfred
3305-2
Kepka, Miloslav
P204-19
Kepler, Jørgen
1113-6
Kermeen, Tim
4107-2
Kessler, Eduard
3108-1
Kessler, Seth
3416-3
Keulemans, Grim
3209-2
Keum, Dong Hoon
P103-11
Kew, Hsein
4309-2
Khaleque, Tasnuva
4402-4
Khan, Mohammad Asgar
4304-1
Khan, Shafique
P203-10
Khanam, Noorunnisa
3212-1
Kharshiduzzaman, Md
3418-3
Khay, Mohamed
3204-3
Khechen, Aris
3201-5
Khellil, Kamel
2106-2
Khokar, Nandan
1106-5
Khurukijwanich, Chaiwat
2205-1
Kianfar, Parnian
3301-4
Kieffer, John
4311-4
Jimenez-Melendo, Manuel P102-15 Jin, Hua
P104-12
Jin, Seung-Bo
P201-3
Jin, Sung Gook
P105-13
1211-1
Jacob Moses, Anbiah
4409-4
Jing, Xin
1110-6
Jacobs, Douglas
3316-4
Jishi, H. Z.
4210-5
Jacobsen, Torben
4219-4
Jitaru, Florentina
P205-11
Jacquemin, Frederic
4216-2
Jochum, Christian
5109-3
Jacquemin, Frédéric
3303-1
Joffe, Roberts
Kaminski, Myriam
4416-1
Jacques, Eric
1221-2
Kamita, Toru
1219-2,1313-1
Jacques, Stefan
1116-3
Joffre, Thomas
1213-3,1217-3,22042,2206-1,3213-1 1213-2
Kammerhofer, Philipp
P101-17
Jaeschke , Peter
1101-5,2201-2
Johannisson, Wilhelm
1221-3
Kanai, Makoto
3104-1
Jain, Atul
1304-3,3108-2,3404-2
Johansen, Kerstin
4117-1
Kanemitsu, Yumi
1301-3
Jakobsen, Johnny
1206-2
Johansson, Anders T.
4403-4
Kanerva, Mikko
P101-5
Jakubinek, Michael
2202-3,3116-2
Johansson, Thomas
5116-1
Kang, Chung-Gil
4412-4
Jalalisendi, Mohammad
4103-1
John, Marianne
3420-1,4110-1
Kang, Donghoon
P202-13
Jalalvand, Meisam
3217-1,3317-1,3317-2
John, Maya
3208-1
Kanouni, Nassim
3404-4
Jalavand, M
2210-1
Johnson, Brice
4206-3
Kant, Matthew
3403-1
James, Stephen
4220-3
Johnson, David
3312-1
Kantor, Mark
3107-1
Jancik, Marek
3409-1
Johnson, Mike
5118-1
Kao, Chih Chuan
3409-3
Janickova, Martina
4401-1
Johnston, Allison
1216-3
Kao, Chih-Chuan
3409-2
Jansen, Irene
1206-1
Johnston, Andrew
3116-2
Kappel, Erik
3106-3
Jansen, Kaspar
1106-1
Johnston, Joel
2214-3
Karalekas, Dimitrios
4120-2
Jarzynka, Patryk
4204-3
Jokinen, Jarno
P101-5
Karatzas, Vasileios
4319-4
Jaworska, Lucyna
4312-1
Joliff, Yoann
2109-4,3415-3
Kardomateas, George
4203-1
Jean-Christophe, Wahl
2217-1
Jonathan Lidgett, Mark
1113-1
Karim, Alamgir
4304-4
Index of authors// Kikuchi, Tetsuo
2101-1,3101-1,3214-2
Klimek-Mcdonald, Danielle 3316-3
Kozera, Rafał
4412-2
Kikuchi, Tokio
5112-2
Klonos, Panagiotis
1309-1
Krahl, Michael
5101-3
Kim, Byung Chul
1106-4,4217-4
Klotzbach, Annett
1206-1,P205-5
Krajnc Alves, Marcelo
Kim, Byungjo
3316-1
Klunker, Florian
3401-1
Kim, Chun-Gon
1321-1,P201-3
Knaut, Martin
Kim, Daniel
5106-4
Kim, Gyu-He
L
Le Begue, Rébecca
4306-3
L. Thomason, James
1309-4
Le Cahain, Yann
4418-2
3214-4
La Bella, Giuseppe
4313-2
Le Corre, Steven
2106-3
Kral, Michal
P101-7
La, Yun Ho
P205-7
Le Duigou, Antoine
4208-3
4412-2
Kranauskate, Ieva
3402-3
Labans, Edgars
5118-3
Le Gal La Salle, Eric
P102-2
Ko, Fu-Hsiang
P105-17
Krasnikovs, Andrejs
P201-12
Laborde, Jerome
2201-1
Le Meur, Kévin
1107-1
P205-19
Kobayashi, Akira
3319-3
Krasnobrizha, Alina
1117-2
Labordus, M.
1207-1
Le Roch, Sandrine
3404-3
Kim, Gyuho
3301-1
Kobayashi, Masatoshi
2107-3
Kratz, James
3410-3
Lacabanne, Colette
4309-4,P203-3
Le Saux, Vincent
4307-1
Kim, H Alicia
2205-3
Kobayashi, Satoshi
4316-2,P204-9
Krause, Daniel
1104-1
Lacarbonara, Walter
P205-10
Le, Huy
1303-3
Kim, Hyonny
4205-1
Koch, Ilja
3104-4
Krause, Dieter
4110-3
Lachaud, Frederic
5117-3
Leadore, Michael
4305-1
Kim, In-Gul
P203-14
Koefoed, Michael
4219-4
Kreling, Stefan
5101-4
Lachman, Noa
3316-4
Leal, A. Andres
4201-2
Kim, Jae Kwan
P202-4
Koerber, Hannes
3109-2,3210-1
Kremers, Marcus
1120-4
Lacoste, Eric
P103-12
Leblanc, Dominic
3409-1
Kim, Jang-Kyo
Koerdt, Michael
5206-1
Kress, Gerald
4418-1
Lacy, Gordon
2205-2
Leboime, Benjamin
4215-4
Koerner, Hilmar
2203-3
Ladani, Raj
3202-4,3202-5
Lech-Grega, Marzena
P204-5
Kogo, Yasuo
Ladeveze, Pierre
2205-4
Lecomte, Julie
1318-1
Kim, Jong Heon
P203-14
Kohlman, Lee
4119-2,4320-1,P10414,P204-11 3210-2
Krishnamurthy, Ramanathan Kroll, Lothar
4218-2
Kim, Jeongseok
1212-2,1312-3,21121,2112-3,21163,3222-3 1320-4
Laeuffer, Hortense
2117-4
Lee, C.w.
3306-3
Kim, Jong-Hak
1321-1
Koichi, Yasuhiro
3414-4
Lagardere, Mylene
2207-4
Lee, Don
3315-1
Kim, Keun Su
2202-3,3116-2
Kojo, Eisuke
P204-11
Kim, Mi-Young
3414-1
Kok, Thijs
3201-3
Kim, Moo Sun
1320-4
Koke, Isabel
5107-3
Kim, Oleksiy S.
3119-2
Kolednik, Otmar
5113-1
Kim, Ryan Jin-Young
P204-16
Konagaya, Shigeji
1212-4
Kim, S. H.
P104-1
Kondash, Corey
3121-3
Krollman, Jan
3411-1,4205-3,44192,5206-1, P202-16 5214-3
Krooß, Tim
3213-4
Lagoudas, Dimitris
3222-1
Lee, Dong-Joo
P204-14
Krug, Mario
4412-2
Lahellec, Noel
3404-3
Lee, Geunsung
3414-1
Kruger, Uwe
1317-4
Lahellec, Noël
2115-2
Lee, Gyu Hee
1301-2
Krull, Brett
4204-4,5204-1
Lahuerta, Francisco
4119-1
Lee, Han Sol
P203-14
Krumenacker, Nicolas
2206-2
Laine, Eric
3318-3
Lee, Hanchul
P201-11
Kruse, Felix
1106-3
Laksimi, Abdelouahed
5118-4
Lee, Hooseok
P101-10,P101-19
Kruse, Thomas
2219-1
Lam, Thomas
3316-4
Lee, Hsiu-Yu
P105-14
Kuang, Jun
3302-2
Lamberti, Alfredo
1303-1
Lee, Hwi Yong
4108-2
Kubota, Yuki
P104-14,P204-11
Lammens, Nicolas
4121-2
Lee, In-Bog
P204-16
Kubouchi, Masatoshi
Lamon, Jacques
4310-4
Lee, Jeonyoon
3416-3
Lampani, Luca
4213-3,4413-2
Lee, Jonghoon
5211-1
Kucernak, Anthony
3113-3,5112-1, P104-18 1221-1
Landry, Alain
4217-2
Lee, Jung-Ryul
2219-3,3219-2
Kudryavtsev, Oleg
4416-2
Landry, Benoit
1107-5,3409-1
Lee, Koon Yang
3408-3
Kuhn, Peter
3210-1
Lang, Holger
1116-2
Lee, Koon-Yang
Kukla, Christian
P101-15
Lang, Reinhold
4207-5
Kulachinskaya, Ol’ga
P105-8
Lang, Udo
3220-1
Kulakov, Vladimir
4216-3,P205-14
Lang, Walter
P101-9
Lee, Manyoung
3108-3,3208-3,32084,3308-1,33174,4308-1 3316-1
Kumar, Satish
4107-3
Lange, Jörg
Lee, Min-Sik
4412-4
Kumar, Vipin
3213-2
Lee, Sang Cheol
P105-12
Kumosa, Maciej
4216-5,P203-15
Langella, Antonio
5219-2,P20215,P204-7 3203-1
Lee, Sang-Soo
P105-13
Kunkel, Christina
P202-15
Langstrom, Runar
1301-1
Lee, Seok-Woo
3301-1
Kunzmann, Christina
4310-1
Lani, Frédéric
Lee, Seung Goo
P101-11
Kupfer, Robert
1107-4
Lee, Si-Hwa
3112-2
Kurahashi, Naoya
4211-4
Lanzara, Giulia
1217-4,1317-2,21144,4114-1 P205-10
Lee, Soo-Yong
P203-17
Kurashiki, Tetsusei
3111-1,3201-1
Laperrière, Luc
5120-1
Lee, Woo Il
1301-2
Kuratani, Yasunari
P102-9
Lardeur, Pascal
5205-2
Lee, Young Hee
P103-11
Kurita, Hiroki
2102-1,4212-1
Larsen, R. Mikael
P201-1
Leeke, Gary
3309-2
Kuroda, Koji
P101-6
Laskowski, Jessica
4302-2
Leen, Sean
2213-1
Kurose, Masashi
3111-1
Lattimore, Allyson
4203-5
Lefebvre, Williams
P103-14
Lau, Aik Yong
3407-2
Lefort, Philippe
5118-3
Lau, Alan Kin Tak
1319-1
Legin, Blanche
1218-3,1218-4
Lau, Kin Tak
1219-4
Lehmonen, Jani
3408-1
Lau, Kin-Tak
1319-2
Lei, Yongpeng
5110-3
Lauke, Bernd
5202-1
Leijonmarck, Simon
Laurent, Charles M. V.
3321-2
Laurenzi, Susanna
5217-3
Leite, Afonso
1121-2,1121-3,12212,1221-3 3413-3
Laurin, Frédéric
1218-4,4416-1
Lekou, D. J.
4219-1,5205-4
Lauro, Fanck
1117-5
Lemonnier, Sébastien
3113-4
Lauter, Christian
5107-3,5107-4
Leng, Jacques
1210-2
Lavoratti, Alessandra
P201-2
Lazaridou, Ilona
P202-9
Kim, Seong Su
3412-2
Kondo, Atsushi
1316-3,2115-1,3306-4
Kim, Seong Yun
P105-6
Kong, Deyan
5212-2
Kim, Seung Mo
1320-4
Kong, Weiyi
2111-1,4317-1
Kim, Sughwan
P201-7
Kononova, Olga
P201-12
Kim, Sumin
P201-7
Konstantakopoulou, Maria 1118-5
Kim, Sunghoon
P104-20
Konstantinov, Alexander
2207-3
Kim, Sung-Jin
4412-4
Kontturi, Eero
3108-3,3408-3
Kim, Tae-Gon
3301-1
Kontturi, Katri
3108-3
Kim, Taesung
2120-2
Koo, Bonsung
2214-3
Kim, Yu-Jin
P204-16
Koo, Chong Min
P205-7
Kimizu, Mitsugu
1111-2,5201-5
Kopsaftopoulos, Fotis
1203-1
Kimpara, Isao
1111-2,2206-4,22091,3414-4,5201-5 4201-3
Korkees, Feras
4316-1
Korkisch, Marco
2206-3
Kornienko, E. I.
1207-1
Kosaka, Tatsuro
4206-5
Kose, Kim
5208-4
Kosmann, Nils
1204-2
Kostagiannakopoulou, Christina Kostopoulos, Vassilis
3312-3
Kotera, Masaru
1302-4
Kotsikos, George Kotsikos, Geroge
1118-5,2118-2,33182,3318-4 3318-1
Kusano, Yukihiro
1309-4,3215-3
Koukaras, Emmanuel
3212-2
Kusukawa, Kazuhiro
4206-5
Kousiatza, Charoula
4120-2
Kuwashiro, Shiho
3213-5
Koussios, Sotiris
1106-1,2117-3,32202,5118-2 1101-3
Kwon, Dong-Jun
1103-2,3213-3
Kühn, Alexandra
1106-3
Kyle-Henney, Stephen
4312-3
Kyritsis, Apostolos
1309-1
Kärger, Luise
1115-5
Käß, Moritz
1118-3
Köll, Joonas
3412-3
Körwien, Thomas
2219-1
Kimura, Masaki Kimura, Teruo
4211-4
King, Julia
3316-3
Kingston, Christopher
2202-3,3116-2
Kinloch, Anthony
3202-4,3202-5
Kinloch, Ian Kireitseu, Maxim Kisailus, David
1312-2,3112-1,32021,5102-1 1221-1
3312-3,5102-4
Kishi, Hajime
3308-4,4204-1,P20513 3213-5,3304-1
Kitai, Keisuke
2208-3,3408-4
Kitamura, Haruki
4320-1
Kitamura, Takanori
2208-3,3408-4
Kitsianos, Konstantinos
4204-2
Kiviniemi, Meri
5112-3
Koutras, Nikos
Klaerner, Matthias
3411-1 1220-1,P204-1
Kleineberg, Markus
4209-3
Koutsomitopoulou, Anastasia F Koutsoukis, Grigorios
P102-4
Kleemann, Sebastian Klemberg-Sapieha, Jolanta E. Klenin, Yu.
P201-16
Koyama, Masashi
4119-2,4320-1
Koyanagi, Jun
1313-1
Kozaki, Shunya
P202-6
3205-4
5207-2
111
//Index of authors Leng, Jinsong
Li, Zengshan
1117-3
Liu, Hong-Yuan
3113-2,3302-3
Lopresto, Valentina
3203-1,5117-4
Ma, Chen-Chi M.
P105-16
Li, Zhang
1204-3
Liu, Hsien-Kuang
1112-1
Lord, Charles
2211-1
Ma, Hao
2215-1
Li, Zhe Ling
3112-1
Liu, Jianwen
1203-3,4221-4
Lorenzelli, Leandro
1119-3
Ma, Hei Lam
1219-4
Lengersdorf, Michael
1219-4,1319-1,13192,4111-2,4221-2,42213,4411-1,4411-4,52122,P205-16 1220-4
Li, Zheling
1312-2
Liu, Jiaxin
3109-4
Lorriot, Thierry
P105-5
Ma, Jing
5102-3
Lennie, Matthew
4219-2
Li, Zheng
3120-3
Liu, Kai
3306-2
Lortie, Frédéric
1109-2,1114-2,2209-4
Ma, Li
5101-1,P203-5
Lenz, Jennifer
4214-4
Li, Zhiqiang
4112-1,P103-10
Liu, Ke
5211-4
1113-5,4215-2
Ma, Peng-Cheng
2103-1,3102-3
Léonardi, Aurélie
P203-3
Liang, Jianyong
4314-3
Liu, Ling
1202-4,4302-3
Ma, Songyun
2114-3
Leone, Frank
4314-2
Liangyu, Chen
P101-14
Liu, Liqi
3407-3
Louar, Mohamed Abderaouf Loukil, Mohamed
1314-4
Liao, Dunming
1110-4,3207-3
Liu, Liwu
4221-2,4221-3
P105-7
3216-2
Leopold, Christian
Lourenço, Ana
Ma, Yu E
5117-3
Liao, Yingqiang
3215-2
Liu, Longquan
4318-3
1119-5,2211-2
P201-12
Lepetit, Bruno
Lowe, Tristan
Machanovskis, Arturs
L’eplattenier, Pierre
2107-2
Liaw, Shien-Kuei
3418-2
Liu, Lulu
1113-4
Lozinskaya, Elena
P205-9
Leray, Dimitri
4306-1
Libanori, Rafael
3114-4
Liu, Luqi
3302-2
Lu, Haibao
4111-2
Lessard, Larry
1108-1,1218-2,2203-2
Licheng, Guo
1204-3
Liu, Mengshi
3209-2
Lu, Weibang
1316-2
Lettieri, Paola
3308-1
Lichtenberg, Klaudia
P103-16
Liu, Ming
Lu, Weijie
4312-2
Leuret, Pierre
2108-2
Liddle, J. Alexander
3316-4,4304-4
Lu, Xiaolong
3402-1
Lewandowska, Anna
4308-1
Liebers, Nico
4209-3
Liu, Muchun
1210-1,4102-2,P1036,P202-3 3402-2
Lu, Yongfeng
1109-6
Leygue, Adrien
1307-1
Liebig, Wilfred
1312-1
Liu, Pengrui
2119-2
Lu, Zixing
3115-1,P201-5
2207-4
Liebig, Wilfried
1214-3,1314-4
Liu, Pinggui
1312-4
Lubineau, Gilles
Li, Biao
1116-1
Liebig, Wilfried V.
1118-4
Liu, Qian
P102-6,P102-7
P202-1
1107-4
Liu, Qinglei
P205-12
Lucchini, Riccardo
Li, Chen
Liebsch, Alexander
1215-2,1315-2,43064,5111-3 1119-3
3201-5
1310-1
Liu, Shitai
3211-2
4208-4
Li, Chun
Liebscher, André
Lucenius, Jessica
4405-1,4405-2
Liu, Shufeng
1215-4
Luchini, Timothy
3307-1
5217-1
Liefeith, Klaus
Liu, Tong
2113-1
5201-4
2202-1
4309-1
Luinge, Hans
Li, Gang
Liggat, John
1115-1
Lijie, Jia
3207-1
Liu, Wenbo
3202-3,3402-1
Li, Hongfu
3209-1
Lilholt, Hans
1308-3,4202-3,5218-2
Liu, Xing
1317-3
Li, Hui
3419-1
Lim, Gyu-Hyeong
1218-2
Liu, Xu
Lukaszewicz, Dirk
1305-4,4213-5,4416-4
Li, Jia-Sheng
P105-3
Lim, Jung-Yup
1321-1
Lund, Erik
2105-1,3304-2,4105-3
Li, Jiuxiao
4312-2
Lim, Ok-Dong
4412-4
1212-2,1312-3,21121,2112-3,3222-3 P201-18
Luiz Passaia Tonatto, Maikson Lukashenoks, Arturs
4205-4
Li, Hang
Lundström, Staffan
4109-1
3211-2
Lim, Shen Hin
3414-2
Lungwitz, Ralf
4401-1
Li, Longbiao
P104-10
Limbachiya, Mukesh
4309-2
Luo, Dongmei
1115-1
Li, Min
Lin, Ching-Chang
P105-17
1113-4
Lin, Guipin
P201-5
Li, Peifeng
3412-1,4202-1,43024,4402-3,4403-3 2113-1
Luo, Gang
Lin, Guiping
3115-1
Li, Qingwen
1316-2,3412-1,4202-1
Lin, Kuen Y.
5113-4
Li, Ran
4316-4
Lin, Shaofeng
1202-3,1302-2
Li, Richard
3316-2
Lin, Xiuyi
Li, Shengzhe
1114-1
Li, Shuguang Li, Shuxin
2111-1,3215-1,33111,4314-1,4317-1, 4417-2, 5217-1 2217-3
Li, Tongqi
P104-13
Li, Wangnan
2104-3
Li, Wenbin
5102-2
Li, Baochao
Li, Dafei
Macias-Montero, Manuel
2102-4
Macutkevic, Jan
3402-3
Madaksira, Vinay
4206-4
Madenci, Erdogan
3305-1
Madsen, Bo Maeda, Genta
1213-3,1308-3,42023,5218-2 P105-9
Magagnato, Dino
4209-4
Magi, Fabrizio
3220-3
Magin, Michael
3310-2
Maguire, James
3307-2
Maguire, Paul
2102-4
Mahajan, Puneet
5114-3
Mahdi, Tanjheel
3403-2
Mahfuz, Hassan
1120-6
Mahishi, Jay
1314-2
Mahmood, Haroon
1309-2
Mahrholz, Thorsten
1106-3
Mai, Fang
5209-2
Mai, Yiu-Wing
2116-3,3302-3
Maier, Alexander
4310-2
Liu, Yazi Liu, Yujie
1207-2
Luo, Suibin
1321-3
Mair, Georg
2217-2
Liu, Zhe
5209-3
4206-2
P103-20
1312-4 3221-5
Maistros, George
Liu, Zongde
Luo, Wen Luo, Yang
Maiti, Surjya
1114-3
Liuyi, Yang
3421-3
Lusis, Vitalijs
P201-12
Majidi, Carmel
4121-3
Lkhagvasuren, Uugansuren Llewellyn-Jones, Thomas
5112-2
Luterbacher, Rafael
4104-1,4204-2
Major, Zoltan
5108-1
Lutz, Johannes
4109-4
Makeev, Andrew
2215-2,4115-4,4415-1
Lin, Ya-Lin
1212-2,1312-3,21121,2112-3,21163,3222-3 P105-17
Llewellyn-Jones, Tom
4311-3
Lux, Alexander
4207-1
Lin, Yu-Chen
1112-1
Llopart Prieto, Llorenç
5101-2
Luyckx, Geert
3417-2,4121-2
Lindbergh, Göran
Llorca, Javier
1207-3
1102-5
Lo, Jonathan
4206-1,5207-4
Luz, Felipe
1120-2
Lindgaard, Esben
1121-2,1121-3,12212,1221-3 1214-1,3304-2
Luyt, Riaan
5112-3
Lv, Shuangqi
P104-11
4411-4
Lindholm, Carl-Johan
4403-4
Lv, Weibang
3412-1
Li, Xiang
4309-3
Ling, Henry
1108-4
Lv, Xinying
3315-3
Li, Yan
Linke, Markus
2218-3
Lv, Yuting
4312-2
Liotier, Pierre-Jacques
4112-4,P103-13
Lyckegaard, Anders
1206-2
Liotta, Andrew H.
1207-2,1307-4,21084,4109-3 2202-2
Lü, Shulin
Li, Yanxia
2215-1,3118-4,32123,4108-4,44102,5115-1 4403-3
Long, Christian
1213-1,2102-2,22113,3108-2,3222-2, 3404-2,4315-3 1304-3,1311-3,22022,3413-1 1211-3,1307-3,21074,2111-1,3107-3,31101,4118-1 3316-4
5211-2
Lindgren, Mari
Lomov, Stepan
Lv, Peng
Lykov, Pavel
P205-6
Li, Yao
1321-4,2112-4
Lippky, Kristian
4101-4
Long, Zhang
1105-6
Lynch, Christopher
5211-2
Li, Yazhi
1116-1
Liqiang, Wang
P101-14
Longana, Marco
4113-1
Lütke, Benjamin
1219-1
Li, Ye
Lira, Cristian
4206-2
Longana, Marco Luigi
4409-1
Lyu, Xiuqi
P202-2
Li, Yi Luen
1109-5,1321-2,P20418 P105-16
Liu, Fengrui
2118-1
Loos, Alfred
3307-1
Löchte, Christian
4101-4
Li, Yongxia
P204-10
Liu, Gang
Lopes, Claudio
3214-1,3405-1,5113-2
Löser, Michael
3307-4
Li, Yu-Hung
1203-1
Liu, Guangyan
1312-3,3211-2,P10218 4414-1
Lopez Puente, Jorge
Li, Yunyu
3419-4
Liu, Hao
P102-20
López, Bernardo
Li, Zan
4112-1
Liu, Hongbo
P203-12
Li, Wenbing
Liu, Yanju
P201-12
Machulyansky, Aleksander P105-15
4221-2,4221-3,44111,4411-4,5212-2,P20516 2102-4
Li, Long
112
Liu, Xueshu
1315-4
Lomov, Stepan V. Long, Andrew
4421-3
Malakooti, Mohammad H. 1121-1 Malczyk, Piotr
4421-2
Maldonado, Jesus
3401-1,4113-3
Malho Rodrigues, Aurelie
4309-4
Malik, M. Haris
P203-10
Mallick, Pankaj
2104-2
Malpot, Amelie
1204-4
Maluk, Cristiàn
3319-4
Manca, Marcello
3203-4
Mandapati, Raghuram
2104-2
Mannberg, Peter
2206-1,3208-2
Mannila, Juha
4202-3
Manohara, Harish
1202-1
Manouchehr, Mehrtash
P204-6
Mansour, Gabriel
1113-2
Mansurov, Zulkhair
P102-17
Mantena, Prabhakar
4103-4
P101-1
Mantič , Vladislav
3413-3
3320-2
Mantic, Vladislav
4214-5
Mao, Lingtao
4203-4
López-Romano, Bernardo 3215-4
M
M. Mohamed, Hamdy
5215-2
Index of authors// Mao, Yiqi
3221-1
Matsuo, Tsuyoshi
3220-4,3314-3,3407-4
Merson, Eleanor
3110-2
Mofokeng, Julia
1102-5
Muddassir, Muhammad
4221-1
Maples, Henry
3109-3
Matsuo, Tuyoshi
4315-2
Merzkirch, Matthias
4212-5
Mogilevsky, Pavel
4218-2
Mueller, Wolfgang M.
Maragoni, Lucio
3106-2,3204-1,3304-3
Matsuzaki, Ryosuke
3101-2,3206-3,4105-2
Mesogitis, Tassos
1307-3
Mohagheghian, Iman
4116-2,4317-2
Maranon, Alejandro
1308-2
Matthias, Barus
P205-2
Metaxa, Zoi S.
2212-3
Mohamed, Galal
1216-1
Mujika, Faustino
1109-1,1110-2,12094,3309-4 3416-1,P103-4
Maraschin, Thuany
2212-4
Mattsson, David
1301-1,1315-4
Metti, Chariklia
1103-1,1103-5
Mohammed, El Moussaid
2217-1
Mukhopadhyay, Supratik
1104-2,3210-3
Marchand, Damien
3318-3
Matveev, Mikhail
3107-3
Metzkes, Karoline
4307-2
Mohanty, Amar
2208-2,4308-2
Mulle, Matthieu
1315-2,4306-4
Marco, Carlos
1212-1,4108-3
Matveeva, Anna
2102-2
Metzner, Christian
1106-2
Mohd Kamal, Nurul Ain
3208-4
Multhoff, Jörg
1220-4,2117-2
Marco, Yann
4307-1
Matzies, T.
1218-1
Mi, Zhian
4401-3
Molina-Aldareguia, Jon M. 3214-1
Mulvihill, Daniel
1206-3
Marek, Jan
4401-1
Maupetit, Jérôme
1109-2
Miaris, Angelos
4217-5
Mollenhauer, David
Mund, Malte
3320-1
Margand, Cécile
1209-2
Mautner, Andreas
4208-4
Michael, Magin
4207-4
Muñoz, Raul
5117-1
Marguerès, Philippe
4306-3
Mavel, Anne
4413-1
Michael, Markus
5112-4
Murakami, Takashi
4315-2
Mariotti , Davide
2102-4
Mavrogordato, Mark
2114-2
Michaelis, Alexander
4412-2
Marklund, Erik
3221-2,4311-1
Mavrogordato, Mark Noel
1214-4
Michaud, Veronique
4111-3
Marks, Christopher
4121-4
Mayer, Rayner
P204-19
Michel, Laurent
1208-3
Markussen, Christen Malte 3119-2,5218-2
Mayne-L’hermite, Martine
3416-2
Michels, Ludger
3101-3
Marlet, José M. F.
3309-1
Mayoral, Beatriz
3212-1
Middendorf, Peter
1106-2,1118-3,3314-1
Marotzke, Christian
3314-4
Mazerolle, Frédéric
3114-2
Mierzwa, Andreas
4201-4
Marovic, Pavao
P101-20
Mcarthur, Sally
5110-1
Miettinen, Arttu
1213-3
Marques, António
1305-2,2117-1
Mccarthy, Conor
4116-3
Migaki, Masakazu
3214-2
Marques, Antonio Torres
1201-4
Mcclain, Michael
3410-4
P101-1
Marra, Fabrizio
1212-1
Mccoppin, Jared
4321-3
Marshall, Martyn
4107-2
Mcgregor, Iain
P202-14
Miguelez Garrido, Maria Henar Mikhailova, Natalia
Martakos, Georgios
5103-1
Mcgugan, Malcolm
4220-1
Martin De La Escalera, Federico Martín Esteban, Jose Antonio Martín, Alberto
4416-3
Mchale, Ronan
P202-11
Mcilhagger, Alistair
4404-3
Mckechnie, Jon
4309-3
Mcshane, Graham
P203-8
Martin, Ffion A
P102-4
Mecklenburg, Matthias
1312-1
Medina, Luisa
4101-2,4201-1
Medina, Luisa A.
1208-2
Meerten, Yannick
3317-3
Mehdikhani, Mahoor
4315-3
Meier, Urs
4419-1
Meiners, Dieter
3311-3
Meizoso-Latova, Daniel
3215-4
Mejri, Mahdi
P104-19
Melchior, Samuel
5108-4
Melenka, Garrett
2111-3
Mellor, Phil H.
4211-3
Melo, David
4401-2
Memon, Anin
P103-7
Mendoza, Ana Isabel
5202-2
Menezes, Eduardo
1120-5
Meng, Fanyi
5203-2
Meng, Songhe Menna, Costantino
4212-4,P102-19,P10412,P204-10 3419-3
Menne, Manuela
3105-4 4214-5
Martin, Olivier
4212-1
Martin, Olivier
2102-1
Martin, Richard
3210-2
Martinez Rubi, Yadienka
2202-3
Martínez, Gerardo
1212-1
Martinez, Marcias
3222-1
Martinez-Rubi, Yadienka
3116-2
Mollenhauer, David H.
1115-2,1115-4,34102,4415-1 4415-3
Moller, James
3116-3
Murakami, Tetsuhiko
P101-19
Monclús, Miguel
3214-1
Muramoto, Masato
4121-1
Mondain-Monval, Olivier
1210-2
Murayama, Hideaki
3104-1,4120-3
Monner, Hans Peter
2321-1
Murnisya, Helmi
5116-1
Montagnier, Olivier
2115-2,3114-2
Musiari, Francesco
2120-4
Montano, Zhuzhell
1320-2
Mustafa, Ghulam
5205-5
Montenegro, Davi
3114-4
Muthu, Nelson
1114-3
Montesano, John
3114-3
Myalski, Jerzy
P104-3,P104-5
Monti, Marco
3318-1
Müller, Bernhard
4212-3
Moon, Sook-Young
4302-1
Müller, Viktor
3315-4
3315-2
Moore, Jeff
4421-1
Müssig, Jörg
2210-3
Mikkelsen, Lars
4220-1
Moore, Jeffrey
4204-4
Månson, Jan-Anders
1210-4
Mikkelsen, Lars Pilgaard
1119-5,3420-2
Moosburger-Will, Judith
Mårtensson, Per
1320-3
Milani, Abbas. S.
P201-14
Mäder, Edith
1203-3,4221-4
Milat, Arijana
4319-3
Möbius, Teresa
P205-5
Miller, Sandi
3210-2
Mora, Angel
1109-1,1209-3,12094,4310-1,44101,5101-2 5111-3
3308-4
P205-9
5107-2
Milliron, Garrett
Morcrette, Mathieu
Mörl, Stefan
5208-1
4302-2
1217-4,1317-2,2114-4
Mösenbacher, Andreas
Milow, Barbara
Morelle, Xavier
Min, Byung Gil
P105-12
Min, Byung-Kwon
3301-1
Minak, Giangiacomo
3301-4
Minakuchi, Shu Minty, Ross
2106-1,2118-4,51092,P101-3 1309-4,3109-1
Mirza, Foisal
1102-3
Mishnaevsky Jr., Leon
1302-1
Miskioglu, Ibrahim
3316-3
Misra, Manju
2208-2
Misra, Manjusri
4308-2
Misumi, Jun
3313-2
Mitchell, Cynthia
3411-3
Mitschang, Peter Miura, Takahiro
1101-2,1208-2,41012,4106-1,41062,4201-1 5106-3
Miyake, Takushi
4320-2
Miyano, Yasushi
3303-3,4303-1
4405-2
Miyashita, Shintaro
4114-2
Menzel, Robert
4102-4
Miyazaki, Takamichi
4212-1
Meraghni, Fodil
Miyazato, Shinichi
5219-1
Mizubayashi, Mai
4207-2
Mizumoto, Kazuya
4207-2
Mizuno, Wataru
3302-4
M’membe, Beene
2116-2
Mocanu, Aurora
P204-17
Modler, Niels
P205-5
Moebius, Marie
2218-3
Martiny, Philippe
4114-1
Martorana, Brunetto
P201-6
Marui, Ryo
5213-3
Mas, Bartolomé
3102-1
Masania, Kunal
3313-4,4113-3,4313-4
Masao, Tomioka
3309-3
Masaya, Kawashima
3309-3
Mascaro, Benoit
1210-2
Maschmann, Matthew
3121-3
Maslouhi, Ahmed
3404-4
Masouras, Athanasios
5102-4
Massabo, Roberta
4203-3,4318-2
Mastrolembo, Giuseppe
3119-3
Matěják, Vladimir
3219-3
Matheis, Ralf
5116-1
Matsubara, Terutake
1115-1
Mercier, Sébastien
1214-2,2120-3,31152,P202-5 4413-1
Matsuda, Satoshi
3213-5,3304-1
Meredith, James
1215-3
Matsuda, Tetsuya
4114-2
Mericer, Caglar
3102-4
Matsuda, Yuki
3404-1
Merino-Pérez, Julián Luis
3110-2
Matsue, Tatsuya
4312-4
Merkert, Dennis
1310-1
Matsugi, Kazuhiro
4412-1
Merlin, Aurore
1210-2
Matsumoto, Tsukatada
1117-5
Merrill, Marriner
3321-3
Moreno Rodríguez, Sergio 4109-1 Moreno, Diego A. Morii, Tohru
4108-3 5213-3
Morimune-Moriya, Seira
1302-4
Morita, Yusuke
P105-9
Morooka, Satoshi
1316-3,2115-1
Morozov, Evgeny
4119-3
Morrell, Roger
2106-4
Morris, Andy
4110-2
Mortin, Samuel
1303-3
Mosleh, Yasmine
1310-3
Mostafavi, Mahmoud
1215-3
Motochika, Toshihiro
5201-2
Motsch, Nicole
3310-2
Mott, Ryan
4321-4
Mottola, Ernesto
1117-5
Mottram, Toby
5215-3
Moulin, Nicolas
1207-2,1307-4
Moulinjeune, Olivier
4207-3
Mounib, Maher
P103-14
Mounien, Richard
3110-3
Mountasir, Adil
3307-4
Mouri Sardar Abadi, Peyman Mouritz , Adrian
5113-2
Mu, Chenzhong
1304-4,3118-1,31182,3202-4,3202-5,32163,3218-1,33184,4204-5 4102-2
Mu, Junwu
P105-4
N
Na, Wonjin
3211-1,3414-1
Nadot-Martin, Carole
5104-4
Naffakh, Mohammed
4108-3
Nagai, Hiroto
P103-3
Nagatsuka, Wataru Nagayasu, Tadashi
3220-4,3407-4,P10110,P101-19,P201-11 P103-3
Nagel, Ulf
3409-2
Nagoh, Satoshi
1201-3
Nagura, Yuichi
4119-2
Nair, Rajeev G
3415-2
Naito, Kimiyoshi
4213-1
Naito, Masaki
3206-3
Najafi, Ahmad
5111-1
Nakada, Masayuki
3303-3,4303-1
Nakagaito, Antonio
5211-4
Nakagami, Motohiro
1311-4
Nakagawa, Masaya
4201-3
Nakai, Asami Nakai, Jun
1201-3,1301-3,33114,5106-3,51071,5201-2 P104-18
Nakao, Nozomu
3213-5
Nakao, Ryosuke
4307-4
Nakatani, Hayato
1115-6
Nan, Xi
5102-3
Nanami, Norimichi
3201-2
Naraghi, Mohammad
1108-5
113
//Index of authors
114
Narayanaswamy, Sridhar
4118-4
Nordin, Mohd Nur Azmi
3404-1
Okuda, Haruki
4310-3
Pan, Diankun
P204-2
Pelassa, Marco
4318-2
Nardari, Raphael
1203-1
Nosrat Nezami, Farbod
1106-6
Okumura, Wataru
5201-5
Pan, Qing
2111-1,3215-1
Pender, Kyle
5209-5
Nash, Pete
3120-4
Notario, Belen
2110-2
Okunkova, Anna
1110-3
Pandya, Kedar
P203-8
Peng, Hua-Xin
Nassiet, Valérie
P205-2
Nouri, Hedi
1313-3
Olave, Mireia
1311-3
Pankow, Mark
3405-4
Natarajan, Bharath
3316-4
Noury, Philippe
4319-1
Oleksik, Josef
1320-1
Pannier, Yannick
2111-2
Peng, Ping
2214-1,3221-5,P20211 3202-3,3402-1
Natarajan, S
1116-4
Nowak, Marek
P204-5
Oliet, Mercedes
P103-5
Panozzo, Francesco
3121-1
Penumadu, Dayakar
3303-4,3403-1
Naya, Fernando
3214-1
Novo, Paulo Jorge
1201-4
Oliveux, Geraldine
3309-2
Pansart, Simon
4119-4
Pereira Fulco, Ana Paula
5115-3
Nayeri, Christian Navid
4219-2
Novoselov, Konstantin
3112-1
Olivier, Philippe
3416-2,4306-3
Pantelides, Chris
3319-2
Pereira, Gilmar
4220-1
Neggers, Jan
3216-1
Nunes, Joao Pedro
1201-4,4401-2
Oller, Sergio
4318-1
Pap, Jozsef-Sebastian
1206-1
Pereira, Michael
3210-2
Nelke, Harald
P204-7
Nunez, Pilippe
4413-1
Olofsson, Kurt
1301-1
Papagelis, Konstantinos
3212-2,P201-9
Perera, Ricardo
5219-4
Nelson, Emmett
3114-1
Nunn, Nicholas
3402-3
Olson, Bradford
4117-3,5204-4
Papini, Marcello
4301-2
Peretyagin, Pavel
1110-3
Nepal, Dhriti
3116-3
Nuruddin, Md.
4203-5
Olsson, Kim
3118-3
Pappas, Georgios
3410-1
Perez, Emile
4309-4,P203-3
Néron, David
2205-4
Nutt, Steven
Olsson, Robin
5217-2
Pardoen, Thomas
4318-1
4414-3 1219-1
Nuzhnyy, Dmitry
4409-4
Neumann, Jens Newcomb, Bradley
4107-3
Nyman, Tonny
3206-2
Omkumar, Meenakshisundaram Omuro, Yusuke
Neville, Robin
P205-17
Nyström, Birgitha
3208-2
Oneill, Kayla
2202-3,3116-2
Park, Chung-Hae
1217-4,1317-2,21144,4114-1 1205-4,3215-4,34133,4214-3,4214-5 2207-4
Pérez, Marco A.
Nettles, Alan
3308-4,4206-1,51064,5207-4 P105-15
Newley, Richard
1222-1
Ono, Kousei
P103-3
Park, Hyunbum
1115-3
Newton, Mark
1302-3
Opelt, Carlos V.
3309-1
Park, Hyungbum
3316-1
Ngahane Nana, Liliane
1320-2
Orange, Gilles
1107-2,4109-2
Park, Jong Gil
P103-11
Ngo, Anh Dung
3107-4
Park, Jongshin
P104-20
Ngô, Anh Dung
3204-3
Park, Joung-Man
1103-2,3213-3
Nguyen, Giang
3415-1
Park, Ju Won
P203-14
Nguyen, Sang
5212-4
Park, Mi-Young
1321-1
Nguyen, Than Hoi
2109-4
Park, Soo-Hyun
3301-1
Nguyen, Van Dung
1317-2
Parks, Joel
3319-2
Nicolas, Perry
2217-1
Parlevliet, Patricia P.
5109-1
Niedziela, Dariusz
P202-16
Parmentier, Antoine
3206-1
Niefnecker, Dirk
5206-3
Parsons, Andrew
2220-2,4107-2
Nielsen, Mark
1205-3
Parthasarathy, Triplicane
4218-2
Nielsen, Rudi P.
5209-4
Parthenios, John
3212-2,P201-9
Nielsen, Steen Arnfred
5120-2
Partridge, Ivana
2116-2,3410-3
Niemann, Steffen
1219-3,1319-3
Partridge, Ivana K
P102-4
Nieto, Ana
4414-2
Pasbakhsh, Pooria
4202-3
Nijssen, Rogier
4119-1,4316-3,5115-2
Nikishkov, Yuri
2215-2
Ning, Baojun
P203-12
Niordson, Christian
4114-3
Nishi, Masato
3111-1
Nishida, Masayuki
4312-4,P102-13
Nishida, Tatsuhiko
5106-3
Nishikawa, Masaaki
1114-5
Nishino, Takashi
1102-1,1302-4
Nishiwaki, Tsuyoshi
2120-2
Nishiyabu, Kazuaki
3201-1,P105-20
Nissle, Sebastian
3221-3,5116-2
Niu, Bin
4301-4
Niu, Jiahong
P104-12
Niu, Yongan
2112-4
Niwa, Shoma
5109-2
Nixon-Pearson, Oliver
3406-1
No, Jae-Young
P201-3
Noda, Junji
1308-1
Noels, Ludovic
1317-2
Nogueira, Ana Carolina
1116-2
Noh, Ye Ji
P105-6
Nordahl, Mitchel
3121-2
Nørgaard Petersen, Helga 1309-4,3409-4
O
4412-1
Ó Brádaigh, Conchúr
2213-1,3307-2
Orgéas, Laurent
1213-2,1313-2
Obeid, Hassan
4216-2
Orifici, Adrian
1304-1
Oberlander, Max
2201-3
Oromiehie, Ebrahim
3417-4
O-Charoen, Narongchai
1108-3
Osaka, Katsuhiko
1115-6
Ochiai, Junpei
P101-6
Osako, Katsunori
4211-4
Ochoa, Ozden
3222-1
Osero, Micheal Angelo
1314-2
Odegard, Gregory
3316-3
Ohsawa, Isamu
P101-10
Oelhafen, Jonathan
5206-3
Oshima, Kahori
2202-4
Offenberger, Sean
2103-4
Osselin, Jean-François
1111-3
O’flynn, Kate
2109-1
Othman, Raja
5102-1
Ogasawara, Toshio
Ouederni, Mabrouk
3212-1
Ogata, Hiroyuki
1313-1,2119-1,43021,P204-11 5112-1
Oueiny, Cynthia
5212-5
Ogawa, Daichi
3104-1,4120-3
Ourahmoune, Reda
2201-1
Ogawa, Takeshi
4302-1
Ousji, Hamza
1113-5,4215-2
Ogi, Keiji
4301-3,5117-2
Ouyang, Chenxin
P104-4 1204-1
París, Federico
Paschereit, Christian Oliver 4219-2 Pasini, Damiano
3205-1
Pastor, Marie-Laetitia
P205-2
1101-5
Patel , Jenish
2102-4
Ogihara, Shinji
3115-4
Ogin, Stephen
3217-2,4306-2,4312-3
Overgaard, Lars Christian Terndrup Overmeyer, Ludger
Ogin, Steve
3301-3
Oz, Fatih
1314-3
Paton, Rowan
P101-2
Ogin, Steven
2211-2
Oz, Fatih E.
5203-1
Patrick, Jason
4204-4,4421-1
Oguma, Hiroyuki
4213-1
Ozaki, Junichi
P102-13
Paul, Baracchini
3205-3
Oh, Il-Kwon
3112-2
Ozawa, Yoshihito
5112-2
Paul, Braisaz
3404-4
O’higgins, Ronan
4116-3
Ozden-Yenigun, Elif
3116-4
Pavazza, Radoslav
2105-3
Ohishi, Masaki
5107-1
Ozolins, Olgerts
1305-1
Pavese, Matteo
4412-3
Ohlsson, Fredrik
1301-1
Pavier, M.
3120-1
Ohnishi, Toru
P203-4
Pavlopoulou, Sofia
2215-3
Ohno, Nobutada
4114-2
5210-3
Pavoski, Giovani
2212-4 3404-3
P
P, Manjula
Ohori, Toshiro
1220-2,3222-4,P202-7
P. S. M., Rajesh
P201-16
Payan, Juliette
Ohsawa, Isamu
Pacheco, Pedro
1103-1,1103-5
Payne, Mark
3316-2
Padovec, Zdenek
P101-7
Pearce, Garth
3414-2
Pahud, Olivier
4217-2
Pechlivanoglou, George
4219-2
Palardy, Genevieve
1101-1
Pedrazzoli, Diego
1109-3
Ohtsuki, Atsumi
P101-19,P20110,P201-11,P202-2 1201-3,1301-3,33114,5106-3,5107-1,52012,5213-3 3120-2
Palardy-Sim, Marc
4406-1
Peeters, Daniel
3405-1,5113-2
Okabe, Tomonaga
4310-3
Palazzo, Gaetano
1107-3
Peeters, Daniël
2105-2
Okabe, Yoji
3418-1
Palin-Luc, Thierry
3104-3
Pegoretti, Alessandro
1109-3,1309-2
Okamoto, Hiroshi
P203-4
Palleiro Palmou, Clara
P101-12
Pegorin, Fabio
1304-4
Okamoto, Masayuki
4201-3
Palungvachira, Patarapon 5112-1
Pei Leng, Teh
P104-17
Oksman, Kristiina
4109-1
Pambaguian, Laurent
Peijs, Ton
3212-3,3212-4,5209-2
Ohtani, Akio
5102-4
Perez-Hermosillo, Edgardo 2216-4 Perez-Rosado, Ariel
3421-1
Péron, Mael
2106-3
Perremans, Dieter
2108-3
Perrier, Amélie
1109-4
Perrin, François-Xavier
5212-5
Perrin, Henri
5211-3
Perron, Christophe
P103-12
Perry, Nicolas
2117-4
Petchnoi, Thanadol
1108-3
Petersen, Helga
3109-1
Peterson, William
5214-1
Petiot, Caroline
4215-4
Petit, Aurélien
3218-4
Petousis, Markos
P202-9
Petre, Razvan
P201-8
Pettermann, Heinz E.
4417-4
Pety, Stephen
4421-1,5111-1
Petzelt, Jan
P105-15
Peyre, Christophe
1209-2
Peyroux, Robert
4408-2
Phadnis, Vaibhav A
2120-1
Phan, Nam
3305-1
Philen, Michael
2103-4
Philippidis, T. P.
4219-1,5205-4
Phillips, Steven
1108-1
Piao, Hao
P101-10
Picault, Elia
4414-4
Pickering, Stephen
4409-3,5209-3
Pickering, Steve
5209-1
Pickett, Anthony
1118-3
Picot, Oliver
3212-3
Picot, Olivier T.
3212-4
Piepenbrock, Joachim
1322-3
Pierce, Jennifer
4218-2
Pierce, Robert
1307-2
Pierlot, Anthony
4210-1
Pierron, Fabrice
4115-1
Piezel, Benoit
2218-2
Piezel, Benoît
4208-2
Pilet, Paul
2108-2
Pilkington, Gordon
P205-3
Pillsbury, Christopher
5204-3
Index of authors// Pimenta, Soraia Pingkarawat, Khomkrit
3117-1,3117-2,31173,3214-5,3407-2,41102,4113-1,4402-4 1304-4,4204-5
Pinho, Silvestre
3122-3,3310-3,3402-4
Pinho, Silvestre T.
3117-2,3117-3,3217-3
Pini, Tommaso
3313-3
Pinna, Christophe
2104-1
Pinter, Gerald
3104-2,3216-4,5208-1
Pinter, Pascal
2213-2
Pinto, Javier
2110-2
Pique, Alberto
3321-3
Piroli, Vanessa
P105-18
Pirondi, Alessandro
2120-4
Pissis, Polycarpos
1309-1
Pitarresi, Giuseppe
5213-2
Pivnenko, Sergey
3119-2
Piyatuchsananon, Taweesak Placet, Vincent
2214-4
Psarras, Spyridon
5117-1
Rainosalo, Egidija
P105-1
Rizkalla, Sami
3319-3
Ruhland, Klaus
P102-14
Pucci, Monica Francesca
2108-4,4109-3
Rajan, Ginu
3417-4
R’mili, Mohamed
4310-4
Ruiz, Edu
3206-4,5203-4
Pugno, Nicola
3312-2,4404-4
Rajan, Rathish
P105-1
Robert, Gilles
Runkel, Falk
3405-2
Pugno, Nicola M.
3212-4
Rajan, Varun
4213-2
1311-1
3202-2
Rajput, Moeen S
4210-3
Roberts, Christopher
Rusanov, Anton
Pullin, Rhys
1214-2,4207-3,43071,5208-2 5211-2
1215-2
Raju, Arun
3112-1
3210-2
5213-1
Pulungan, Ditho
Roberts, Gary
Russo, Pietro
P101-7
3206-4
Raju, Karthik
1218-2
Růžička, Milan
P203-20
Pupure, Liva
1213-3,1217-3
Rakotoarisoa, Carole
2111-2
Ruzicka, Pavel
P101-7
Pupurs, Andrejs
1121-3,1315-4,2204-2
Ramadan, Amira
P105-11
Robitaille, François
3109-3,3117-1,31172,3117-4,41131,5117-1 4209-1
Ruzicka, Milan
Pupin, Cédric
Robinson, Paul
Rybczyński, Radosław
4120-1
Purong, Jia
1105-6
Raman, Venkadesh
1120-1
Rocha, Iuri
4316-3,5115-2
Rypl, Rostislav
3214-3
Putaux, Jean-Luc
4408-2
Ramirez, Fernando
4408-4
Rodcheuy, Nunthadech
4203-1
Ryu, Ho Jin
4402-1
Putnam, Eric
4119-4
Ramli, Nur Farahana
P104-17
Rodrigue, Denis
3308-2
Röhrkohl, Meike
4419-2
Putyra, Piotr
4312-1
Rangari, Vijaya
3112-3
2110-2
Puvvada, Renee
1108-5
Rannou, Johann
2219-2
Pyl, Lincy
1113-5,1317-3,4215-2
Rans, Calvin
4315-1
Rodriguez Perez, Miguel Angel Rodriguez, Francisco
Rao, Sanjeev
4117-4
Rapp, H.
3417-1,P102-11,P10212,P105-2 1218-1
Rodriguez-Lence, Fernando Rodriguez-Senín, Elena
Raquez, Jean-Marie
3312-4
Roese-Koerner, Imke
3218-3
Rashkovan, Izabella
P105-8
Rogaume, Thomas
3218-2
Ratke, Lorenz
4302-2
Roger, Frederic
1313-3
Ravandi, M.
3208-5
Rohde, Sean
3405-3
Ravindran, Anil Raj
1103-4
Roig, Rafael
1205-4
Razin, Alexander
1105-5
Rolfes, Raimund
1217-2
Rebillat, Francis
2113-2
Rolfes, Raimund
3210-1
Redenbach, Claudia
1310-1
1213-2,1313-2
Safdari, Mnasoud
5111-2
Reed, Philippa
4417-3
Safonov, A.
3205-4
Regazzi, Arnaud
4408-2
Rolland Du Roscoat, Sabine Rolland, Héloïse
5208-2
Safonov, A. A.
1207-1
Rehbein, Johannes
3211-4
Romanov, Valentin
2102-2,3222-2
Safonov, Alexander
2207-3,3107-1
Reich, Gregory
3121-3,4411-3
Romanzini, Daiane
P105-18
Safriet, Sirina
4415-1
Reichanadter, Alex
3316-3
Sager, Mustafa
1313-2
Reichl, Katherine
3321-1
Sahraee, Shahab
1217-2
Reinhold, Raphael
1107-6
3416-1 Romian Sitohang, Ramona 1208-1 Delphine Rongong, Jem 2211-1
Saigal, Anil
3416-4
Reinoso, José
1217-2
Rose, Michael
1206-1
Sailer, Robert
3121-2
Reiter, Martin
5108-1
Rosemann, Heiko
5106-1,5203-3
Saintier, Nicolas
5208-2
Reitz, Thomas
4321-3
Roser, Tim
1107-6
Remacha, Marina
3320-2
Ross, Annie
3206-4 2103-2
Q
P103-5
P101-12
Qamar, Isabel
4104-2
4107-1
Qi, Guocheng
1121-5,3109-4
Plackett, David
3102-4
Qi, H. Jerry
3221-1
Plaisted, Thomas
4305-1
Qi, Haisong
1203-3
Plazibat, Bože
P204-4
Qi, Jiayi
1215-4,1315-1
Plesse, Cédric
P205-9
Qian, Connie
5108-3
Plummer, Christopher
1210-4
Qian, Danna
2119-1
Pochiraju, Kishore
4314-3
Qian, Hui
5212-4
Pocklington, Istvan
4309-2
Qiang, He
P202-17
Podasca, Viorica
P205-8
Qin, Faxiang
3221-5
Poltimae, Triinu
P205-14
Qin, Zhen
P103-10
Poncelet, Olivier
1210-2
Qing, Hai
4314-4
Ponkratov, Denis
P205-9
Qiu, Xueying
5212-2
Pooch, Matthias
5206-4
Quach, Thi Hai Yen
3218-2
Poole, Matthew
2211-2
Quadflieg, Till
3111-2
Porfiri, Maurizio
4103-1
Quadrini, Fabrizio
3203-5
Porras, Alicia
1308-2
Quaresimin, Marino
Portet, Stephanie
4220-3
Posmyk, Andrzej
P104-3
Post, Wouter
4404-2
Quero, Franck
3106-2,3121-1,32041,3304-3,3304-4,42071,5104-3 4308-1
Pošvář, Zdeněk
P203-20
Queudet, Hippolyte
3113-4
Remmers, Joris J. C.
5114-1
Rossiter, Jonathan
Potluri, Prasad
Quijada, Raúl
2212-4
Ren, Musu
3407-3
Rothe, Holger
4405-2
Quinn, Simon
4420-1
Ren, Wei
4112-3
Roure, Thomas
1111-3
Quintero, Jorge
2216-4
Ren, Yiru
P204-12
Rousseau, Jérôme
2218-2
Poulios, Konstantinos
1211-3,2211-2,31123,3217-2 3206-5,4113-1,42062,4311-2,4409-1 4114-3
Resch, Katharina
4208-1
Roux, Stéphane
4215-4
Poursartip, Anoush
1306-1,2107-1
Poursorkhabi , Vida
2208-2
Prabhakaran, Rt, Durai
4409-2
Pradyawong, Pradchar
3113-3
Préau, Mathieu
4210-4
Predecki, Paul
4216-5
Premalal, Vikum
4213-1
Premanond, Varunee
P103-7
Primetzhofer, Andreas
5208-1
Prissok, Frank
5203-3
Rt, Durai Prabhakaran
4409-2
Prota, Andrea
3419-3
Prusty, B. Gangadhara
1116-4
Prusty, Gangadhara
3414-2,3417-4
Przybyla, Craig
4218-2
Potter, Kevin
R
Romera, Jesús M.
S
Saarela, Olli
P101-5
Sabar, Hafid
5211-3
Sabuncuoglu, Baris
4315-3
Sacchetti, Francisco
1101-6
Sacco, Elio
3209-4
Sachse, Ronny
1118-3
Sacui, Iulia
4304-4
Saez Rodriguez, Eduardo
3409-2
Saez-Rodriguez, Eduardo 3409-3 Sáez-Rodríguez, Eduardo 5110-2
Sainz De Aja, José Ramón 4416-3 Saito, Hiroshi
2206-4,3414-4
Saito, Takeshi
3311-4
Sakai, Tetsuya
3113-3
Sakaida, Yoshihisa
5117-2
Sakuma, Shigeyoshi
1104-4
Sakurai, Takaya
3104-1
Sala, Maurizio
P204-15
Salaberger, Dietmar
1213-4
Salajkova, Michaela
5202-3
Salavagione, Horacio
1212-1
Salavatian, Mahdi
1315-3
Salinas, Christopher
3308-4,P205-13
Salunkhe, Santosh
2216-2
Salvia, Michelle
2201-1,5206-2
Samer, Nassim
2102-1,4212-1
Samsonov, Alexander
4320-3
Sanada, Kazuaki
3302-4,4207-2
Sánchez Muñoz, Ana
P101-1
Sanchez, Fernando
Reurings, Niels
5118-2
Roy, Ajit
5211-1
R. Foldschack, Mathilde
3215-3
Revel, Ivan
5117-3
Roy, Anish
2120-1
Rachik, Mohamed
5118-4
Rezende, Mirabel C.
3309-1
Roy, Samit
3116-1
Rackles, Jürgen
1303-2
Rhead, Andrew
1205-3,2113-3
Roza José, David
3214-4
Radebe, Isaac
1205-2
Rice, Norman
5204-4
Rozen, Bert
3220-2
Radek, Markus
2201-3
Richard, Luke
5113-4
Rozin, N. V.
1207-1
Radford, Donald
1301-4
Richardson, Robert
4308-1
Rozycki, Patrick
1117-1,1117-2,4414-4
Radjef, Racim
5110-1
Richler, Simone
3309-4
Rubini, Luca
3212-4
Radlmaier, Veronika
3109-2
Rider, Andrew
4321-1
Rubio-Gonzalez, Carlos
2216-4
Rahbek, Dennis Bo
2114-1
Ridha, Muhammad
4414-3
Ruch, Frédéric
4306-1
Rahier, Hubert
1102-2,3110-4
Rink, Marta
3313-3
Rudd, Chris
4107-2
Rahkonen, Mirva
P105-1
Riopedre Méndez, Sara
5110-2
Rudd, Christopher
2220-2
Rahmat, Meysam
3116-2
Rissanou, Anastassia
2212-2
Rudlund, Mats
3206-2
Rai, Ashwin
3122-2
Risso, Giovanni
4319-3
Rudolph, Enrico
4419-2
Sanchez, Ivan
4209-2,P10210,P205-15 3318-1
Raijmaekers, Sibrand
4316-3,5115-2
Rittenschober, Bernhard
1107-6
Ruengwaree, Amnoiy
P103-7
Sánchez, Serafín
4214-3
Raimkhanova , Danara
P102-17
Rivera-Gomez, Carlos
2208-1
Ruggeri, Charles
3210-2
Sanchez, Sonia
4213-3
115
//Index of authors Sánchez-Sáez, Sonia
3320-2
Schijve, Warden
1215-2,1315-2,4306-4
Seo, Gang Seok
P202-13
Shin, Hye-Jin
2219-3
Skandali, Maria
1106-1
Sandström, Johan
3118-3
Schillfahrt, Christian
3406-2
Seon, Guillaume
2215-2,4115-4
Shin, Hyunseong
3316-1
Skordos, Alex
1307-3
Sanford, Gregory
3320-3
Schindler, Stefanie
3211-3
Seong, Dong Gi
P102-3
Shin, Pyeong-Su
1103-2,3213-3
Skordos, Alex A
P102-4
Sanial, Philippe
1111-3
Schipperen, Ingrid
4116-1
Sergeichev, I.
3205-4
Shin, Seeun
3302-1
Sankar, Bhavani
3405-3
1115-5
Serpieri, Roberto
3209-4
Shiozaki, Keisuke
4201-3
1208-4,P105-1 5118-3
Santagiuliana, Giovanni
3212-4
Serrano Abello, Leonell
4307-1
Shipsha, Anton
3414-3
Slapak, Pavel
5103-4
Santo, Loredana
3203-5
Schirmaier, Fabian Johannes Schladitz, Katja
Skrifvars, Mikael Skukis, Eduards
Schledjewski, Ralf
2109-2
2120-3
Slinker, Keith
2203-3,3121-3
Seto, Daigo
3206-3
Sluis Van Der, Olaf
3216-1
Setoguchi, Takuma
5207-3
Shirinbayan, Mohammadali Shirshova, Natasha
P201-15
1206-3
2110-3,3420-1,4110-1
Shiyu, Wang
Smerdova, Olga
Schlimper, Ralf
Shor, Ofir
5113-3
3120-1
4313-1,5116-2
Sever, Ibrahim
Smith, D. J.
Schmeer, Sebastian
1309-3,2108-4,31131,3209-2 3220-3
2202-2
4119-1
Seveno, David
Shishkina, Oksana
Sluys, Bert
Schleupen, Joseph
3111-3,3207-2,33113,3406-2,41063,4310-2 1222-3
Servinis, Linden
1107-6
3121-3
Shterenlikht, A.
3120-1
3109-3
Schmidhuber, Sebastian
Severin, Benjamin
Smith, Damilola
P101-18
5219-4
Shulev, Igor
P205-6
P105-2
Schmidt, Jens
Sevillano, Enrique
Smith, Dawn
Sfyris, Dimitris
3212-2
Shustova, Evgeniya
P202-20
Smith, Jeffrey A.
4415-3
Shadmehri, Farjad
4217-2
Siddique, Zahed
5109-4
Smith, Lloyd
1315-3
Shaffer, Milo
Siddiqui, Nadeem
4419-3
Smith, Patrick
2104-1
Sideridis, Emilios
P201-20
Smith, Patrick J.
5204-2
Silberschmidt, Vadim
2120-1
Smith, Paul
Siljander, Sanna
3408-1,5112-3
Smith, Robert
1308-4,2211-2,33013,4306-2 3210-3
Sillard, Cecile
3102-4
Sobotka, Vincent
2106-3
Silva, Gustavo
3205-2
Sockalingam, Subramani
3313-2
Silva, Joao Francisco
1201-4
Sodano, Henry A.
1121-1
Silva, Lais
1120-5
Sodoke, Kossi
5120-1
Silva, Laís
1120-2
Sokoli, Hülya U.
5209-4
Silvain, Jean-François
1109-6
Solbach, Andreas
1318-3
Silverman, Tyler
4108-3
Solis, Washintong
1110-3
Simacek, Pavel
5207-1
Sommerlot, Stephen
3307-1
Simard, Benoit
2202-3,3116-2
Song, Seung A
3412-2
Simenou, Gidéon
P102-2 5213-1
Song, Weidong
1217-1
Song, Yujie
4102-2
4218-2
Songhe, Meng
2119-3
Simões, Rogério
P105-7
Sonmez, Fazil O.
P201-17
Simon, Zoltan
1107-6
Sorrentino, Luigi
3313-1,5213-1
Simone, Angelo
1121-4
Sotiriadis, George
3312-3
Simonsen, Morten E.
5209-4
Soto, Albert
4416-3
Simpson, Josh
4206-2
Sottos, Nancy
4204-4,4421-1,5204-1
Simpson, Rob
P205-3
Sottos, Nancy R
4104-3
Sims, Graham
1322-1,4306-2
Soulas, Floriane
5117-3
Sinclair, Ian
Soutis, Costas
1119-6
Singery, Vicky
1214-4,3122-1,32104,4417-3 1111-3
Souza, Christiane S. R.
3309-1
Singh, Chandra Veer
3114-3
Souza, Samia
5215-1
Singh, Harpreet
5114-3
Spagnoli, Andrea
4111-1
Singh, Sudhanshu
2213-3
Spearing, S. Mark
Santonicola, Mariagabriella 5217-3 Santulli, Carlo
4413-2
Sapozhnikov, Sergei
1103-3,4116-4,P1014,P205-6 4416-2
Sapozhnikov, Sergey Sarasini, Fabrizio
1221-1
Sarlin, Essi
3313-1,4213-3,44132,5213-1 3408-1,5112-3
Sarrado, Carlos
5114-1
Schmidt, Jonathan
1320-2
Sarto, Maria
1212-1
Schmidt, Moritz
1219-1
Sartor, Pia
3205-2
Schmidt, Stefan
1106-3
Sasaki, Gen
4412-1,P104-9
Schmidt-Lehr, Matthias
2201-3
Saseendran, Sibin
1206-4
Schmidt-Stein, Felix
1209-3
Shah, Darshil
1221-1,2102-3,31171,4102-4,52102,5212-4 4304-4
Saseendran, Vishnu
5103-2
Schmieder, Annett
5112-4
Shah, Priyal
3103-1
Sassi, Sonia
4306-3
Schmitt, Stefan
P101-13
Shaharuddin, Sharifah
4107-2
Satheesh, Britto
3207-2
Schmitz, André
3119-1
Shahbazi, Mina
5113-3
Sato, Chiaki
P203-4
Schmitz, Jonas
P102-14
Shams, Adel
4103-1
Sato, Hiroki
5112-2
Schneider, Julien
4114-4
Shamsuddin, Siti-Ros
2212-1,5210-2
3301-2
Schneller, Anna
3309-4
Shamsudin, Mohd
3421-2
Sato, Takashi
3201-2
Schnurr, Raphael
4101-4
Shan, Wanliang
4121-3
Sause, Markus
1119-1
Schoenhals, Andreas
2109-3
Shang, Junjun
2112-2
Sause, Markus G. R.
2206-3,4115-2,5101-2
Scholler, Jochen
5101-2
Shankar, Krishna
4119-3
5205-3
Scholz, Marc
4311-3
Shaplov, Alexander
P205-9
Savage, Luke
5108-3
Schorer, Nora
4115-2
Sharma, Ambuj
5202-5
Savant, Aniruddha
3405-3
Schreiber , Makoto
2208-2
Sharma, Renu
3316-4
Savi, Marcelo
1103-1,1103-5
Schreier, Hubert
4415-1
Sharmin, Nusrat
4107-2
Savinov, Maxim
P105-15
Schuh, Benjamin
3218-3
Shaw, Richard
2106-4,P205-3
Sayer, Florian
4119-4,5106-1,5203-3
Schulte, Karl
1204-2,1214-3,1312-1
Sheikh, Abdul Hamid
1105-3,3415-1
Scalici, Tommaso
4313-2,5213-2
Schulz, Alexander
3305-2
Shelton, Richard
1221-1
4410-3
Schulz, Katrin
P103-16
Shen, Hui-Shen
3305-3
1209-4
Shen, Lulu
1202-4,4302-3
Schulze, Martin
5206-4
Shen, Ming Yuan
P105-16
Scarth, Carl
3221-5,P20211,P205-17 3205-2
Schulz, Michael Schunk, Torsten
1209-3
Shen, Xi
Scattina, Alessandro
4317-4
Schuster, Jens
4109-4
Schade, Ronald
4405-1
Schwab, Martin
4417-4
Schaefer, Maximilian
4406-4
Schwartzentruber, Jeff
4301-2
Shen, Yiou
1212-2,1312-3,21121,2112-3,21163,3222-3 2215-1
Schaefer, Philipp
5201-1
Schäfer, Jens
1201-1
Shenderova, Olga
3402-3
Schaeuble, Ralf
2110-3,3420-1
Schäfer, Kay
P202-16
Shenogin, Sergei
5211-1
Schagerl, Martin
1104-3
Schäuble, Ralf
4110-1
Sheperd, Robert
2521-1
Schalk, Thomas
4207-4
1106-1,4212-3
Spelt, Jan
5202-4
2203-2
Sinke, Jos
Scienza, Lisete
Schaper, Mirko
5107-4
Sirilli, Matteo
5217-3
Sperling, Sven
4217-5
Scienza, Lisete Cristine
P201-2
Schares, Richard
P101-13,P101-15
Sherafat, Mohammad Hossein Sherwood, James
1214-4,2114-2,32104,4417-3, 3122-1 4301-2
3411-2,3411-3
Siriruk, Akawut
3303-4
Spickenheuer, Axel
1211-1
Sebeck, Katherine
4311-4
Scheerer, Michael
1107-6
Shi, Duoqi
1110-6,P104-11
Sirivolu, Dushyanth
3103-3
Spiteri, Mark
3118-1
Šedek, Jakub
1202-2
Scheffler, Christina
4221-4
Shi, Han-Qiao
P102-6,P102-7
Sirois, Frederic
P201-16
Srikanth, Narasimalu
P202-8
Sedighiamiri, Amin
3407-1
Scheider, Ingo
2114-3
Shi, Huajie
3306-1
Sisodia, Sanjay
2114-2
Staehr, Richard
2201-2
Sedlacek, Radek
P101-7
Scheika, Mike
3211-3
Shi, Jian
P102-1
Sistaninia, Masoud
5113-1
Staines, Stephen
4220-3
Seegel, Hauke
1322-3
Schell, Julia
4306-1
Shi, Qi
5101-1,5110-3
Sitnikova, Elena
Stanescu, Paul
4305-3
Seemann, Ralf
4110-3
Schemmann, Malte
3315-4
Shimamoto, Kazumasa
P203-4
Stang, Henrik
4219-5
Sekiguti, Yu
P203-4
Shimamura, Yoshinobu
Sivasubramonian, B. Siviour, Clive
4115-1
Staniewicz-Brudnik, Barbara Stefaniak, Daniel
3413-2
Shimode, Kento
2202-4,4213-1,43021,P202-6 1219-2
2111-1,2218-4,32151,4314-1,43171,5217-1 3415-2
Shin, C S
3418-2
Sjölander, Jens
1306-3
Stefic, Tihomir
P101-20
Sato, Hisashi
Sawada, Takahiko
Scarfato, Paola Scarpa, Fabrizio
116
2110-3
Scherer, Florian
2217-2
Seliktar, Dror
2220-4
Schiebel, Patrick
1118-2
Semenova, Irina
4320-3
Schiffer, Andreas
5217-4
Şener, Özgün
2204-4
Simeoli, Giorgio Simmons, Jeff
4313-4
Index of authors// Stegelmann, Michael
5101-3
Sun, Yantao
P104-11
Tancret, Franck
2108-2
Tirillò, Jacopo
4213-3,4413-2,5213-1
Stein, Itai
3416-3
Sung Won, Jong
P101-11
Tang, Guang
5210-2
Tison, Franck
P105-5
Steinmann, Paul
3115-2
Sung, Minchang
3414-1
Tang, Kaili
4414-1
Tita, Volnei
1305-2,2117-1
Stelzer, Steffen
3216-4
Sunter, Deborah
2101-3
Tang, Shuli
P201-11
Tkocz, Marek
P104-5
Uchic, Michael
4218-2
Stepanov, Sergey
P101-12
Suresh Babu, Annamalai
4409-4
Tang, Xiao
P102-8
Todoroki, Akira
3101-2,3206-3
Uchida, Toshikazu
P101-6
Steuten, Bart
1120-4
Surowiec, Benjamin
2120-3
Tang, Zhanwen
1121-5
Todt, Melanie
4417-4
Uda, Kazufumi
1108-2
Stewart, Graham
4118-4
Sutcliffe, Michael
1118-1,1206-3,1220-3
Tanigawa, Motohiro
5106-3
Toftegaard, Helmuth L.
1216-4
Uda, Nobuhide
P103-3
Sticko, Simon
1213-2
Suttmann, Oliver
1101-5
Taniguchi, Norihiko
2120-2
Tohgo, Keiichiro
2202-4,P202-6
Ueki, Yosuke
1308-3
Stifter, David
3209-3
Suzuki, Erika
2101-1
Tao, Huang
1105-6
Tomac, Tomislav
4319-3
Uenishi, Keisuke
3111-1
Stigh, Ulf
4214-2
Suzuki, Takuya
1120-6
Tapeinos, Ilias
2117-3
Tomar, Vikas
1119-4
Ueno, Ichiro
5207-3
Stodieck, Olivia
3105-2
Suzuki, Tomoyuki
4301-1
Tarar, Harshal
4117-3
Tomioka, Masao
2101-4
Ullah, Inam
5103-3
Stoffers, Niels
1106-3
Suzuki, Yuta
3301-2
Tarfaoui, Mostapha
1113-3
Tomoaia, Gheorghe
P204-17
Ulven, Chad
3121-2,4408-1
Stojkovic, Miroslav
4206-2
Swery, Elinor
1311-2
Tashkinov, Mikhail
3315-2
Tomoaia-Cotisel, Andrada P204-17
Umer, R.
4210-5
Stoll, Ragnar
5203-3
Swiergiel, Nicolas
4215-4
Tatam, Ralph
4220-3
Tomoaia-Cotisel, Maria
P204-17
Umer, Rehan
Stolyarov, Oleg
3111-2
Swolfs, Yentl
3317-3,4213-4
Tatsuno, Daichi
4201-3
Tonejc, Maximilian
3111-3
Storage, Kara
4415-3
Syerko, Elena
4109-2
Tatsuya, Tanaka
3309-3
Tong, Lili
P102-8
Unnikrishnan, Vinu
3417-1,4317-3,P10211,P102-12 3116-1
Storage, Tara
1115-2,3306-3
Süsler, Sedat
5117-4
Tay, T. E.
3208-5
Tong, Liyong
P101-2
Unterweger, Christoph
3209-3
Straesser, Stefan
1304-3
Szabo, Peter
3102-4
Tay, Tong Earn
4414-3
Tong, Mingbo
P203-6
Uozumi, Tadashi
Stranick, Stephan
4304-4
Szczurek, Anna
4421-2
Tay, Tong-Earn
3310-3
Tong, Xiao
1316-2
Straumit, Ilya
1213-1,2202-2
Szymański, Wojciech
P103-17,P204-5
Taylor, Ambrose
3313-4
Tong-Qi, Li
P103-1
Urakami, Daisuke
1201-3, 1301-3, 51063, 5107-1, P101-6, P102-9 2107-3
Strauß, Sebastian
1201-2
Søgaard, Erik G
5209-4
Taylor, Ambrose C.
4402-4
Torrecillas, Ramón
1110-3,1110-3
Urata, Naoya
P202-6
Stringer, Jonathan
5204-2
Sørensen, Bent F.
1216-4,3216-5
Taylor, Graham
2121-3
Torsakul, Sirichai
P103-7
Ureña, Alejandro
1112-3
Stronge, William
P203-8
Sørensen, René
2105-1,4105-3
Taylor, Mark
P105-2
Tosch, Matteo
1211-1
Urquhart, Jeannie
2106-4
Strömberg, Emma
5202-2,P105-19
Tazelaar, Katrin
3220-2
Totaro, Giovanni
3219-4
Usabiaga, Hodei
1311-3
Studart, André
2321-2,3114-4
Tcerbi-Narteh, Alfred
3403-2
Toubal, Lotfi
5120-1,P104-19
Ushakov, A.
3205-4
Su, Honghua
2201-4
Tabatabaei, Seyed Ahmad 2211-3
Tcharkhtchi , Abbas
2120-3
Touchard, Fabienne
1109-4,1204-4
Ushakov, A. E.
1207-1
Su, Huilan
P205-12
Tagarielli, Vito L.
5217-4
Tcherbi-Narteh, Alfred
4203-5
Tranquart, Bastien
3110-3,4414-4
Ushakov, Andrei
3107-1
Su, Xintian
4208-1
Takagaki, Kazunori
2106-1,5109-2
Tchugaynova, Anna
P202-20
Trappe, Volker
3204-2,4307-2
Utku, Feride Sermin
4405-3
Subramanian, Nithya
3122-2
Takagi, Hitoshi
5211-4
Teil, Maxime
4408-2
Trask, Richard
Uzawa, Kiyoshi
1111-2,5201-5
Suda, Mitsunori
3408-4
Takagi, Mitsuro
5201-2
Teixeira De Freitas, Sofia
4212-3
Suemasu, Hiroshi
3310-4
Takahashi, Jun
1221-1
P201-10
Teo, W. S.
3208-5
Sugio, Kenjiro
4412-1,P104-9
Terada, Mariko
1212-4
Sugita, Tomohiro
1308-1
Teramura, Suguru
2208-3
Suh, D. W.
P104-1
Takahashi, Tatsuhiro
1220-2, 3222-4, 3407-4,5201-3, P10110,P101-19, P201-10, P201-11, P202-2, P202-7 2119-1,3213-2
Teixeira, Rita
Suganuma, Hirofumi
3314-2,3321-4,41042,4204-3,4304-2,43113,4411-2,4421-3 4104-1 1117-5
Terashima, Keita
1219-2,1313-1
Sui, Gang
2202-1
Takahashi, Tomoyuki
2209-1
Terrasi, Giovanni Pietro
3319-4
Suihkonen, Reija
5112-3
Takai, Yuka
2101-1
Theotokoglou, Efstathios
P201-20
Suksangpanya, Nobphadon Suleman, Afzal
3308-4
Takeda, Nobuo
1313-1,5109-2,P101-3
Therriault, Daniel
Takenaka, Kazuya
4320-2
Sullivan, Erin
1108-5
Takeshi, Ishikawa
3309-3
Thomas, Evan
1103-4,4321-2,P20116 4321-3
Taketa, Ichiro
1104-4,4113-2
Thomas, James
Talò, Michela
P205-10
Tam, Wai-Yin
1319-2
Tamaoki, Tetsuo
4120-3
Tan, K.t.
P203-11
Tan, Loon-Seng
5205-5
Sumitomo, Ken
P101-19
Summerscales, John
4208-3
Sun, Bao-Gang
P102-6,P102-7
Sun, Dan
2102-4,3212-1
Sun, Fei
3207-3
Sun, Jian
P201-5
Sun, Jianming
1109-5
Sun, Jinliang
3407-3
Sun, Nijuan
2209-2
Sun, Rong
1321-3
Sun, Rui
5219-4
Sun, Shiyong
4403-2
Sun, Wen-Hsien
P105-17
Sun, Xiao
3310-4
Sun, Xinying
1212-2,1312-3,21121,2112-3,3222-3
T
Trask, Richard S. Treutenaere, Sylvain Trifol, Jon
3102-4
Töpker, Jochen
U
V, W
1209-3
Vachon, Pierre-Luc
3204-3
Vaclavik, Jaroslav
P204-19
Wada, Daichi
4120-3
Wafai, Husam
1215-2,1315-2,4306-4
Wafy, Tamer
3202-1
Wagemaker, Marnix
1121-4
Wagner, H Daniel
4313-3
Wagner, Ronald
1219-3,1319-3
Wagner, Werner
2216-3
Wahl, Jean-Christophe
2117-4,3104-3
Vaia, Richard
4411-3
Trimpe, Fritz Felix
P202-18
Trivaudey, Frédérique
4107-1
Trochu, François
4106-4
Troester, Thomas
5107-3,5107-4
Truong, Hieu
3222-1
Trümper, Wolfgang
5118-3
3321-3
Tröltzsch, Jürgen
P202-16
Thomas, Kenneth
3303-4
Tsai, Jia-Lin
P105-14
Thomason, James
Tsampas, Spyros
2206-1
Tsampas, Spyros Anastasios Tsilimigkra, Xenia
3213-1
Vaia, Richard A.
4111-4
Vairis, Achilles
P202-9
Thomassey, Matthieu
3109-1,3409-2,34093,4309-1,44092,5110-2 4306-1
3312-3
Waldbjørn, Jacob
4219-5
4111-4
Thomopoulos, Stavros
2220-1,4305-2
Tsongas, Konstantinos
1113-2
Valente, Teodoro
4213-3,4413-2
Tan, Marcus
5111-1
Thompson, Mark
1307-2
Tsotsis, Thomas
4107-3
Valenza, Antonino
4313-2,5213-2
Tan, Vincent
3310-3
Thompson, Richard
3312-1
Tsoukleri, Georgia
3212-2,P201-9
Valette, Julien
3104-3
Tan, Zhanqiu
4112-1,P103-10
Thomsen, Ole T.
1105-3,1204-1 , 5103-1
Tsukada, Takuhei
P101-3
Walker, Eric
1314-2
Tan, Zhi Bin
P101-2
Thorvaldsen, Tom
2114-1
Tsumura, Yusuke
1114-5
Valles, Cristina
3112-1
Tanabe, Daiki
3201-1
Thostenson, Erik
4321-1
Tual, Nicolas
4214-1,4216-4
Wallin, Markus
P101-5
Tanaka, Fumihiko
4310-3
Thumsorn, Supaphorn
1108-3
Turkenburg, Daniel
4204-2
Vallons, Katleen
3413-1
Tanaka, Hiroha
P104-18
Thurnherr, Claudia
4418-1
Turner, Thomas
4409-3,5209-1,5209-3
Walter, Volker
4212-5
Tanaka, Hiroki
P104-14
Tiar, Mohamed Amine
5108-2
Turon, Albert
5114-1,5218-3
Walther, Frank
1318-3
Tanaka, Kazuto
P105-9
Tienda, Kevin A.
4415-3
Türkmen, Halit S.
5117-4
Valvo, Paolo S.
1216-4
Tanaka, Mototsugu
2209-1
Timofeev, M.
3205-4
Tzeng, Shinn-Shyong
P105-10
Van Den Abeele, Koen
4404-2
Tanaka, Tatsuya
2101-4
Tippur, Hareesh
4215-3
Tzetzis, Dimitrios
1113-2
Van Den Brink, Wouter
3417-3
117
//Index of authors
118
Van Der Heijden, Sam
1102-2,3110-4
Wang, Xin
5219-3
Weichand, Patrick
3108-1
Vincent, Prisca
4215-4
Wynter, Kevin
1303-3
Van Der Meer, Frans
4119-1
Wang, Xintao
5101-1
Weidenmann, Kay André
Vinogradov, Vladimir
2115-4
Wysocki, Maciej
1206-4
Van Der Zwaag, Sybrand
4404-2
Wang, Yanchao
P201-13
1101-5
1121-4,3113-1
Wang, Yang
3209-1
Weijie, Lu
Wippo, Verena
Van Duin, Adri
2213-2,3115-3,42125,P103-16 P101-14
Wang, Yanjie
4202-1
1306-2
1108-1
3407-1
Weiland, Jakob
Viriyasuthe, Chanvit
Van Erp, Tim Van Hemelrijck, Danny
1317-3
Wang, Yanlei
3419-4
Weimer, Christian
1106-2,5109-1
Wisnom, Michael
Van Loon, Jan
3220-1
Wang, Yanqiu
P103-9
Weinzierl, Matthias
3105-1
Wisnom, Michael R.
2210-1,3310-4,33171,4113-1,4404-1 3217-1,3317-2
Wan Nawawi, Wan Mohd Fazli Van Paepegem, Wim
3408-3
Wang, Yazhen
P203-7
Weiping, Liu
3207-1
Withers, Philip
1119-6,2211-2
Wang, Yi
4116-2
Weir, Mike
3312-1
Withers, Philip J.
1119-5
Wang, Ying
1119-6
Weizhen, Pan
2119-3
Vittori, Jean François
P202-5
Wang, Yingde
5110-3
Welemane, Hélène
P205-2
2208-2,4308-2
Wang, Yuan
3401-2
Wells, Garry
2211-2
Wells, Jeremy
1306-1
Vivekanandhan, Singaravelu Vizcaino Rubio, Pablo
Welsh, Jeffry
3114-1
Velthuis, Rudi
3220-1
Vena, Pasquale
1119-3
Verdaguer, Ambre
3308-2
Verghese, Nikhil
1215-2,1315-2,4306-4
X
Xia, Yuanyuan
3419-1
Xian, Guijun
3419-1
Xiang , Feng
P103-1
Xiao, Bing
3408-2
Xiao, Lijun
1217-1
Xiao, Shengrong
2119-2
Xiao, Shumin
P104-4
1318-2
Xiao, Xianghui
2213-3
Vlak, Frane
P204-4
Xiao, Xinli
5212-2
Vlasov, Petr
P205-9
Xiao, Yi
1317-1
Vogel, Christian
1101-4
Xie, Ningbo
3210-3
Vogler, Matthias
3210-1
Xie, Wang
3407-3
Voland, Etienne
1218-4
Xie, Weihua
P204-10
Volatier, Julien
3206-5
Xin, Li-Min
1114-4
Wolf, Michel
4412-2
Xing, Lingbing
4403-2
Wolff, Johannes
P202-18
Xing-Jan , Jiao
P103-1
Volk, Brent
1115-2,2203-3
Xiong, Jian
5203-2
Volk, Brent L.
3306-3
Xiong, Liwen
1310-2
Vollrath, Fritz
4304-4
Xu, Chenghai
P102-19
Wolodko, John
4408-3
Xu, Desheng
P102-19
Von Der Heyden, Aaron
5219-2
Xu, Feng
3113-2
Van Santfoort, Els
1102-2,1116-3,13043,1317-3,31104,4121-2 1309-3
Van Wingerde, Arno
4119-4
Wang, Yuequan
P203-6
Van Vuure, Aart
1108-1,1309-3,2108-4
Wang, Yukun
3402-2
Van Vuure, Aart Willem
Wang, Zheng
5107-3,5107-4
Wan, Liqiang
1208-1,2108-1,21083,4308-3 5212-1
Wang, Zhenyu
Wan, Yi
3222-4
Wang, Zhiyong
1212-2,1312-3,21121,2112-3,3222-3 2119-2
Vandellos, Thomas
1218-4
Wang, Zuo-Jia
1103-2,3213-3
Vergote, Karel
5118-2
Vandepitte, Dirk
1311-3
Wan-Jusoh, Sheila
3318-4
Verma, Devendra
1119-4
Vander Sloten, Jos
1310-3
Vanlanduit, Steve
1303-1
Verners, Osvalds
1121-4
Vanegas-Jaramillo, Juan David Vanfleteren, Jan
5218-3
Vanneste, Myriam
4401-1
Vernet, Nicolas
3206-4
Vantomme, John
1113-5,4215-2
Verpoest, Ignaas
Wang, Ben
1108-5
Vara, Igor
1311-3
Wang, Bing
P203-18
Wardle, Brian
3316-2,3416-3
1110-1
2202-2,3316-4
Vervust, Thomas
Wang, Bo
Wardle, Brian L.
1108-1,1304-3,21081,2211-4,3222-2,42134, 2108-3,3404-2 3417-2
Von Klitzing, Regine
2109-3
Xu, Hong
1316-2
2110-1
1318-1
1105-4
Wang, Changfeng
Wargnier, Hervé
Vescovini, Riccardo
Won, You-Jin
P203-17
Xu, Liang
4118-3
2209-2
4204-5,5204-3
1209-3
Wang, Chi
Varley, Russell
Wetjen, Denise
1213-1
Wong, Kok
5209-1
Xu, Pan Fu
3216-2
Whitaker, Joanne
3120-4
Wong, Tsz-Ting
1319-2
Xu, Xiaoshan
4403-2
Warnet, Laurent
Whitcomb, John
2214-2
Wongsriraksa, Patcharat
1111-2
Xu, Yunyan
1215-4
Wang, Dan
1304-1,2218-1,32024,3202-5 1205-1
1121-3,1206-4,12173,2204-1,2204-2 3201-3,P204-3
Wevers, Martine
Wang, Chun
Varna, Janis
4204-4,4421-1,5204-1
White, Scott R
4104-3
Xue, Jia
1115-1
Wang, Dongyao
3202-3
1207-4,4206-3,5108-3
4304-4 4208-1
1303-4
Warrior, Nicholas
Woodcock, Jeremiah Wool, Richard P.
Xu, Zhihong
4111-4
1101-6
White, Scott
Wang, David
Warnet, Laurent L.
5111-1
Vořechovský, Miroslav
3214-3
Vasco, Marina
P104-16
Whitlow, Travis
4218-2
Worley, Alex
3103-2
Vasconcelos, Miguel
4401-2
Wicks, Sunny S.
2202-2
Worrall, Chris
3301-3
Yagi, Shintaro
P202-6
Vasile, Eugenia
4305-3
Vidal Urriza, Maria
1109-4
Wouters, Kimberly
4308-3
Yakymenko, Yuriy
P105-15
Wang, Han
3305-3, 3315-3, 42183, 4318-3, 4403-1, P104-4, P203-2, P203-12 1112-2,3412-1
5211-1
White, Scott R.
Wang, Hai
Varshney, Vikas
Vasiliev, Valery
1105-5
Vidal, Frédéric
P205-9
Wright, Louise
2106-4,P205-3
Yamada, Rio
P104-9
Wang, Jie
1317-1
Wass, Duncan
3321-4,4204-3,4304-2
Viechtbauer, Christoph
1104-3
Wu, Chang-Mou
1102-6,P105-3
Yamamoto, Namiko
1202-1
Wang, Jihui
2217-3
Watanabe, Jun
4310-3
Vieille, Benoit
3218-4
Wu, Chao
3204-4
Yamasaki, Tatsuya
P103-3
Wang, Jin
4403-2
Watanabe, Naoyuki
1316-3,2115-1,3306-4
Wielhorski, Yanneck
4114-4
Wu, Kun
P103-9
Yamashita, Shinichiro
P201-10
Wang, Kon-Well
5202-5
Watanabe, Yoshimi
3301-2
Wierach, Peter
3218-3
Wu, Qi
3418-1
Yamatogi, Toshio
3104-1
Wang, Muzhou
4304-4
Watanapa, Anucha
P103-7
Vietor, Thomas
1220-1,4205-2,P204-1
Wu, Qinghua
P102-20
Yan, Jun
4105-4
Wang, Peipei
5106-1,5203-3
Watt, Gerald
4312-3
Vignoles, Gérard
2113-2
Wu, Shusen
4112-4,P103-13
Yan, Shibo
3110-1
Wang, Qi
3202-3,3402-1
Waugh, Rachael
4420-1
Vila, Joaquim
1207-3
Wu, Shuying
3202-4,3202-5
Yan, Wenyi
1114-3,3204-4
Wang, Qianqian
P205-13
Vaulin, Sergei
4116-4,P205-6
Vilatela, Juan José
3102-1
Vu, Van
3415-1
Yan, Ying
1314-1
Wang, Qingwei
P105-12
Vavouliotis, Antonios
5102-4
Wilhelm, Frederik
1201-2
Wu, Ying
Yanes, Sonia
3217-4
Wang, Rongguo
3202-3,3402-1
Vaziri, Reza
5113-3
Wilken, Ralph
P101-12
1110-1
4402-3
Weaver, Paul
Wilkinson, Arthur
5102-1
Wille, Tobias
3417-3
1114-6
3202-3,3402-1
3412-1,4202-1,4302-4
Wu, Zhanjun
Yang, Fan
Wang, Shaokai
Williams, Andrew
3114-1
Wucher, Benoit
4114-1
1302-2
2110-1,P203-13
Weaver, Paul M
Yang, Fubiao
Wang, Shilong
1105-1,2103-2,31052,3205-2,4110-4 3205-5
Wu, Yiting
Yang, Chengpeng
Wang, Shao Kai
1212-2,1312-3,21121,2112-3,3222-3 P202-1
1315-1
4408-1
Williams, Gordon
4215-1
Wucher, Benoît
3206-1
P201-4
Wang, Songwei
Webster, Dean
Yang, Jia-Ming
P105-14
2110-3
Williams, Jason
2213-3
Wuhrer, Richard
P205-13
1209-1,2103-3
Wang, Tai-Yuan
Vecchio, Irene
Yang, Jinglei
4311-4
4206-4
Williams, Martin
3202-2
Vukasovic, Marko
2105-3
5101-1
Wang, Weimin
Wedel, André
Yang, Jinshui
1115-1
4201-2
Villon, Pierre
4115-3
Vulcan, Maria Adina
P201-8
1114-6
Wang, Wen-Xue
Veeramachaneni, Joshi
Yang, Lei
2111-1
Wilmes, Andre
3402-4
Vuorinen, Jyrki
3408-1,5112-3
P203-13
Wang, Victor
Wehrkamp-Richter, Tobias 3217-3
Yang, Liming
Wang, Xiaofeng
3407-3
Wei, Haowen
P101-19
Wilson, Peter
1215-3,4406-2
Vyas, Gaurav
3221-2,4311-1
Yang, Liu
Wang, Xiaojun
P103-9
Wei, Shaolou
4112-3
Winberg, Fredrik
1106-5
Vygodskii, Yakov
P205-9
3409-2,3409-3,43091,5110-2,5209-5 3317-3
3417-2
Y
Yang, Mengdie
Index of authors// Yang, Qiang
P204-10
Yoshihiko, Arao
3309-3
Zhan, Jiadong
4202-2
Zhao, Minhua
3316-4
Yang, Qiao Jie
1105-2
Yoshimura, Akinori
1313-1,4105-2,5117-2
Zhang , Richao
2102-4
Zhao, Xiantao
2107-4,2111-1
Yang, Qingda
1214-4,5214-2
Yoshioka, Kenichi
3315-1
Zhang, Bing
1203-2
Zhao, Xiaoran
1321-2,3211-2
Åkermo, Malin
1306-3,1320-3,2101-2
Yang, Qingsheng
2112-2
Yost, Kevin
4321-3
Zhang, Bo
P203-12
Zhao, Xin
1212-3
Österberg, Monika
4208-4
Yang, Qing-Sheng
P202-10
You, Zhong
4403-1
Zhang, Boming
Zhao, Yan
Østergaard, Rasmus
4219-4
Yang, Rongjuan
P103-20
Young, Robert
Yang, Rui
4301-4
Zhang, Dahai
Yang, Seunghwa
3316-1
Younkin, Douglas
1212-3,1312-2,31121,3202-1,4310-3 4206-3
1121-5,3109-4, 32091,3306-2 2209-2
Yang, Xiaoguang
1110-6,P104-11
Yousefpour, Ali
3116-2
Yang, Xiaoping
2202-1,5102-2
Yu, Bin
1209-1
Yang, Yang
3417-2
Yu, Hana
4113-1,4409-1
Yang, Yi
P102-20
Yu, Jilin
2110-1,P203-13
Yang, Yongqi
5116-3
Yu, Kai
3221-1
Yang, Yu
4417-2
Yu, Lichao
2209-3
Yang, Yuqiu
2209-3,3408-2,P101-6
Yu, Long
4215-1,4317-2
Yang, Zhe
1109-5,P204-18
Yu, Mingming
3407-3
Yang, Zhenyu
3115-1,P201-5
Yu, Qiyong
4401-3
Yang, Zhi-Yong
P102-6,P102-7
Yu, Seunggun
P205-7
Yang, Zhong-Jun
P202-10
Yu, Shuhui
1321-3
Yano, Fumiaki
3220-4,3407-4
Yu, T. X.
1310-2
Yano, Mamoru
P104-14
Yu, Tao
3118-4,5115-1
Yanwei, Zhu
2119-3
Yu, Tianhong
4314-1
Yao, Liaojun
5104-2
Yu, Tian-Hong
2111-1
Yaraghi, Nicholas
3308-4,P205-13
Yu, Woong-Ryeol
3211-1,3414-1
Yarza, Pablo
4319-3
Yu, Yalin
1121-5,3109-4
Yasaee , Mehdi
1203-2,1216-1,2116-2
Yu, Yin
4218-3,P203-2
Yashiro, Shigeki
4301-3,5117-2
Yu, Zhefeng
P203-12
Yazdani Nezhad, Hamed
4116-3
Yuan, Hongliang
5110-3
Ye, Jinrui
3306-2
Yuan, Qiaolong
4202-2
Ye, Lin
3221-4,4104-4
Yuan, Zeshuai
3115-1
Yeh, Yu-Kuei
3102-2
Yubo, Feng
1204-3
Yi, Fajun
P104-12
Yudhanto, Arief
1215-2,1315-2,4306-4
Yi, Sinan
4118-3
Yue, Wang
P201-15
Yi, Xiaosu
5217-1
Yuksel, Nermin
4405-3
Yidong, Zhang
1204-3
Yilmaz, Ezgi Deniz
2114-3
Yin, Ming
4402-2
Yin, Qi
5205-2
Ying, Zhe
1112-2
Yingzhi, Liu
1204-3
Yip, Ming Chuen Yokozeki, Tomohiro
Z
Zhao, Zhenhua
Zhang, Fan
4112-1,P10310,P103-19 1210-1
1109-5,1312-4, 1321-2,2119-2, 32112,3402-2,4401-3, 5106-2,P204-18 1113-4
Zhenchong, Zhang
4402-3
Zhang, Fenghua
P205-16
Zheng, Lianxi
2103-3
Zhang, Guanhua
2111-4
Zheng, Nan
3302-3
Zhang, Guoqi
P203-18
Zheng, Wei
5203-2
Zhang, Hailong
P103-18
Zheng, Zhijun
2110-1,P203-13
Zhang, Han
3212-3
Zhengong, Zhou
P201-15
Zhang, Hui
4102-1
Zherebtsov, Dmitrii
P205-6
Zhang, Jian
2111-1
Zhi-Hai, Feng
P103-1
Zhang, Jianwei
1202-3,1302-2
Zhikharev, Mikhail
4116-4
Zhang, Jianyu
1316-1,2118-1
Zhong, Junjie
2215-1
Zhang, Jifeng
P203-1
Zhong-Wei , Zhang
P103-1
Zhang, Juan
2209-2
Zhou, Eric
3410-2,3415-4
Zhang, Kuangyi
4215-1
Zhou, Fang
1120-6
Zhang, Liying
1210-1,4102-2,P103-6
Zhou, Gang
3120-4
Zhang, Mengsi
4302-4
Zhou, Helezi
4216-1
Zhang, Mi
1114-1
Zhou, Jie
4116-2
Zhang, Ming Qiu
4104-4
Zhou, Jin
4317-3
Zhang, Qian
1315-1
Zhou, Jingwen
2201-4
Zhang, Qiwei
4411-1
Zhou, Li
3106-4
Zhang, Shen
5212-2
Zhou, Limin
P203-1
Zhang, Taotao
1314-1
Zhou, Min
3403-3
Zhang, Tong
1312-4,2119-2
Zhou, Peng
P104-4
Zhang, Wang
P205-12
Zhou, Xiang
4403-1
Zhang, Wenbo
5212-2
Zhou, Yan
Zhang, Xiao-Chong
P202-11
5212-3 4115-1
Zhang, Xiaohua
4202-1
Zhu, Haibin Zhu, Jianhua
Zhang, Xiaoyan
1321-2
Zhu, Shaowei
P203-18
Zhang, Xin
P201-10
Zhu, Shenming
P205-12
Zhang, Xutang
P103-9
Zhu, Shuhua
P203-6
Zhang, Yafang
P102-20
Zhukov, Arkady
3221-5
Zhang, Yi
5204-2,P102-6,P102-7
Ziegmann, Gerhard
3311-3
Zhang, Yidong
5116-3
Zientarski, Lauren
4121-4
Zhang, Yongsheng
P203-7
Zike, Sanita
3420-2
Zhang, Yongyi
1316-2
Zimmermann, Kristian
3314-1
Zhang, Youwei
1312-4
Zimny, Kévin
1210-2
Zhang, Zhichun
P205-16
Zinn, Carolin
5107-4
Zhang, Di
P104-4
Zafari, Behrouz
5215-3
Zaharia, Catalin
4305-3
Zak, Alla
4108-3
Zang, Shixi
4403-1
P105-16
Zangenberg, Jens
4219-4
Zappalorto, Michele
3121-1
Zaremba, Swen
Yom-Tov, Ortal
1219-2,2119-1,32132,P205-1 2220-4
Yon, Jason M.
4211-3
Zarif Karimi, Navid
2118-3,4406-4,52011,5206-3,P101-17 3301-4
Yoneyama, Satoshi
4316-2
Zattera, Ademir
5202-4
Zhang, Zhiqian
4118-4
Zinno, Alberto
3419-3
Yoneyama, Takeshi
4201-3
Zattera, Ademir José
P201-2
Zhang, Zhiyuan
2208-3,3408-4
Zogg, Markus
3114-4
Yong, Ana
4306-2
Zattera, Ademir J.
P105-18
Zhang, Zhong
3302-2,4102-1
Zongsheng, Cao
3421-3
Yong, M. S.
3208-5
Zawada, Larry
4218-2
Zhang, Zhongsen
4410-2
Zouari, Wajdi
5108-2
Yoo, Hye-Jn
P102-16
Zavattieri, Pablo
3308-4,P205-13
Zhang, Zuo Guang
4402-3
Zrida, Hana
2204-2
Yoon On, Seung
3412-2
Zeiler, Rico
4413-3
Zhang, Zuoguang
Zu, Lei
2217-3
Yoon, Jae-San
3219-5
1119-1
P203-7
P105-12
Zhao, Defang
Zu, Liwu
Yoon, Kwan Han
Zhao, Guozhong
4105-4
2120-4
1210-4
P104-12
Zucchelli, Andrea
Yoon, Yonghoon
Zelenyak, AndreeaManuela Zeng, Qingxuan
3412-1,4202-1,43024,4403-3 P101-6
Zeng, Xuesen
1211-3,3110-1
P202-20
3105-3,3421-2
3315-3,4218-3
Zuiko, Valerii
York, Christopher
Zhao, Jian
1311-4
1112-2
Zhao, Jiupeng
1321-4
2119-3
Yoshida, Keishiro
Zeng, You
Zujun, Peng
4211-4
4413-3
Zhao, Jiuzhou
5116-3
1106-4, 4217-4
Yoshida, Masaki
Zeng, Zhe
Zympeloudis, Evangelos
Zenkert, Dan
1221-2,1221-3,1320-3
Zhao, Libin
1316-1,2118-1
Å, Ö, Ø
ICCM20 The following institutions, associations and corporations actively endorse the ICCM20 in Copenhagen in 2015. The companies are furthermore supporting the successful organisation and completion of the conference including sponsorship and representation at the industrial exhibition planned for the ICCM20.
19-24 July 2015 - Copenhagen, Denmark
www.iccm20.org
ICCM www.iccm20.org
Printed in Denmark by Kandrup
Endorsers
20th International Conference on Composite Materials
