the conference booklet

Summary  Welcome to ICEM’2012 in Marseille, France ...................................................... 3  Message from the Technical Program Co‐Chairs ................................................. 5  ICEM'2012 Committees ....................................................................................... 7  ICEM Steering Committee ............................................................................ 7  ICEM'2012 Organizing Committee ............................................................... 7  ICEM'2012 National Scientific Committee ................................................... 7  ICEM'2012 Technical Tracks ......................................................................... 8  General information ............................................................................................ 9  Program at a glance ........................................................................................... 13  Conference room distribution ........................................................................... 14  Sunday 2nd of September ...................................................................................15  Tutorials .....................................................................................................15  TU 1: Fault Diagnosis, Prognosis and Reliability of Electrical Drives .........15  TU 2: Life‐Cycle Cost Optimization in Variable‐Speed‐Driven Pump and  Fan Systems...............................................................................................15  TU 3: Improving Motor Efficiency and Motor Miniaturization ‐ The Role of  Thermal Simulation ...................................................................................15  TU 4: Design and Testing of Insulation for Adjustable Speed Drives ........15  TU 5 ‐ Tutorial: Superconducting Machines ‐ History and Latest  Developments of Superconducting Machines ..........................................15  Poster session 1 ........................................................................................15  Monday 3rd of September ..................................................................................23  Poster session 2 ........................................................................................23  TPC5‐1 ‐ Monitoring and diagnosis ...........................................................30  TPC5‐2 ‐ Measurements and testing .........................................................30  TPC1‐1 ‐ Losses, thermal and efficiency analysis ......................................31  TPC3‐1 ‐ Electrical drives 1 ........................................................................32  SS7 ‐ Electrical machines for aerospace applications ...............................32  TPC7‐1 ‐ Grid‐connected and renewable energy applications 1 ..............33  TPC4‐1 ‐ Manufacturing and technological problems ..............................33  TPC6‐1 ‐ Embedded applications 1 ...........................................................34  SS10 ‐ Hybrid excitation synchronous machines ......................................34  SS12 ‐ Education in electro‐mobility .........................................................35  Tuesday 4th of September ..................................................................................36  Poster session 3 ........................................................................................36  TPC4‐2 ‐ Thermal problems ......................................................................43  1

TPC1‐2 ‐ Fractional slot machines .............................................................43  TPC4‐3 ‐ Magnetic materials .....................................................................44  TPC1‐3 ‐ IPM Machines .............................................................................45  TPC3‐2 ‐ Electrical drives 2 ........................................................................45  SS8‐1 ‐ Design of electrical machines for the automotive sector 1 ..........46  SS8‐2 ‐ Design of electrical machines for the automotive sector 2 ..........46  TPC5‐3 ‐ Noise, vibration and high frequency effects...............................47  TPC7‐2 ‐ Grid‐connected and renewable energy applications 2 ..............47  SS9‐1 ‐ Analytical models of electric machines and actuators 1 ...............48  SS9‐2 ‐ Analytical models of electric machines and actuators 2 ...............48  TPC2‐1 ‐ Machines for special applications ..............................................49  TPC6‐2 ‐ Embedded applications 2 ...........................................................49  SS11 ‐ Noise and vibrations in electrical machines ...................................50  SS4 ‐ Condition monitoring for hybrid and electrical vehicles ..................50  SS2 ‐ Energy conservation in transformers and related practices ............51  TPC2‐2 ‐ Magnetic gears and linear machines ..........................................52  SS5 ‐ Modeling and control of high speed motors ....................................52  SS1 ‐ Recent advancements in sensorless control of electrical machines 53  SS6 ‐ Application and optimization of modern signal processing tools in  electrical machines ...................................................................................53   Exhibitors .......................................................................................................... 55 

2

Welcome to ICEM'2012 in Marseille, France On behalf of the ICEM’2012 Organizing Committee, I would like to welcome you all in th Marseille, the largest city of the South of France for the XX edition of the International Conference on Electrical Machines (ICEM). It is really a great honour and a pleasure as well to have the privilege to host this conference in the city where I was born and where I studied up to the end of the high school. Marseille as well as Corsica has a very special place in my heart and I did put pressure on the ICEM’2012 Organizing Committee members to make ICEM’2012 as successful as all the previous editions. The ICEM has established itself as an influential and recognized international event, being the only major international conference entirely devoted to electrical machines. Started in London in 1974, ICEM is now established as a regular biennial event. Very successful recent editions were held in Helsinki (Finland) in 2000, Bruges (Belgium) in 2002, Cracow (Poland) in 2004, Chania (Greece) in 2006, Vilamoura (Portugal) in 2008 and Roma (Italy) in 2010. Even if ICEM is an independent non-profit organization, it has started link with the Institute of Electrical & Electronics Engineers, Inc. (IEEE) with a technical co-sponsorship of societies starting in 2006. This has been the consequence of a real jump in quality and now ICEM papers are published in one of the most important scientific data bases in the world, the so-called IEEEXplore. Moreover, ICEM papers are now more referenced than in the past due to what IEEE is providing in term of international visibility. For the 2012 edition, ICEM has received the technical cosponsorship of IEEE Industry Applications Society, Industrial Electronics Society, Power & Energy Society and also of the Institution of Engineering and Technology. This is the second time ICEM is coming in France after the 1994 edition in Paris. The choice of Marseille has been based on the fact that it is situated in the second French area in term of innovation and number of researchers in the field of sciences and technology. Even if needed, the technical visit will confirm this fact. With its 26 centuries of history, Marseille is a city full of art and culture which has many wonders to share with you. Moreover, the city combines tradition and modernity. Marseille is deeply marked by its past and is constantly digging up the remains of all the cities that have been built on top of each other over the centuries. It takes the visitor on a journey that begins with its Greek and Roman origins and leads us past the medieval religious foundations, the 16th Century fortifications, the rich homes of the 17th and 18th Centuries and the many prestigious buildings erected in the 19th Century and right up to modern times and the great architectural achievements of the 21st Century. In 2013, Marseille will be the European Capital of Culture (MP2013). The ICEM’2012 Organizing Committee wishes you a very successful conference in which you will certainly attend interesting technical sessions, you will meet new friends and colleagues for further collaborations and you will return back home with new ideas from this exciting technical field of electrical machines. Enjoy Marseille, enjoy ICEM’2012 and do make it a memorable event! Gérard-André Capolino ICEM’2012 General Chair 3

4

Message from the Technical Program Co-Chairs The XXth edition of ICEM is a major event of the worldwide engineering community working in the field of electrical machines and their applications. It was therefore a great honour and a pleasure for us to be responsible for the technical program of ICEM’2012. This is the fourth time after Chania in 2006, Vilamoura in 2008 and Roma in 2010, that ICEM proposes its new shape to participants and to authors with the technical cosponsorship of IEEE. For this purpose, it has been asked to submit a full provisional version of each paper for both regular tracks and special sessions. For the 2012 edition, the Organizing Committee has proposed to participants: 5 tutorials 7 tracks for regular papers 11 special sessions on “hot” topics A student forum A technical exhibition with 10 booths An exciting technical visit of the ITER project Altogether, 672 papers have been submitted and 469 will be in the final program involving around 1,800 authors from 44 countries in the world. The mean number of reviews per paper has been 2.93 involving close to 1,600 reviewers. In the technical program, the papers have been splitted in 3 poster sessions of around 100 papers each and 30 oral sessions of 6 papers each. The Technical Program represents the integrated effort of many individuals, namely, authors, reviewers, track co-chairs, special session organizers, and the National Scientific Committee members, whom we thank for their contributions to the success of ICEM’2012. It is our strong opinion that the world's state of the art in electrical machines is well represented across both technical tracks and special sessions. However, if few words have to be chosen, then "embedded, grid-connected, design, control and condition monitoring" are our choices of keywords that summarize the large majority of presentations. We look forward to the intellectual stimulation of all participants, and thank you again for attending ICEM’2012. Bienvenue à Marseille! Carole Henaux, Aldo Boglietti, Bertrand Nogarede ICEM’2012 Technical Program Co-Chairs

5

6

ICEM'2012 Committees ICEM Steering Committee Gérard-André Capolino (France), Chair Carlos Lemos Antunes (Portugal), Secretary Andreas Binder (Germany) Manuel Pérez Donsión (Spain) Hulusi Bülent Ertan (Turkey) Tom Jahns (USA) Basile Kawkabani (Switzerland) Antonios Kladas (Greece) Jorma Luomi (Finland) Jan Melkebeek (Belgium), Awards Chair Bertrand Nogarede (France) Francesco Parasiliti (Italy) Mircea Radulescu (Romania) Chandur Sadarangani (Sweden) Peter Tavner (UK) Slawomir Wiak (Poland) Corresponding Members Jamel Bel Hadj (Tunisia) Rachid Ibtiouen (Algeria) Maarten Kamper (South Africa) Sang-Bin Lee (Korea) Hiroyuki Ohsaki (Japan) Pragasen Pillay (Canada) Ma Weiming (China) Driss Yousfi (Morocco) Jianguo Zhu (Australia)

ICEM'2012 Organizing Committee General Chair: Gérard-André Capolino Technical Program Co-Chairs: Carole Henaux, Aldo Boglietti, Bertrand Nogarede Special Session Co-Chairs: Franck Betin, Mohamed Boussak Tutorial Co-Chairs: Annette Muetze, Sandy Smith, Jean-François Llibre Exhibition Chair: Richard Grisel Awards Chair: Jan Melkebeek Student Forum Co-Chairs: Shahin Hedayati Kia, Babak Nahidmobarakeh Finance Chair: Humberto Henao Publication Chair: Laurent Capocchi Publicity Co-Chairs: Francesco Parasiliti, Basile Kawkabani, Amine Yazidi Web and Information Co-Chairs: Cyril Drocourt, Antonio Luque

ICEM'2012 National Scientific Committee Chair: Bertrand Nogarede Members: Stephan Astier, Seddik Bacha, Georges Barakat, Hamid Ben Ahmed, Mohamed Fouad Benkhoris, Jean-François Brudny, Jean-Frédéric Charpentier, Maurizio 7

Cirrincione, Guy Clerc, Philippe Enrici, Guy Friedrich, Mohamed Gabsi, Daniel Guyomar, Patrick Lagonotte, Yvan Lefevre, Vincent Mazauric, Farid Meibody-Tabar, Nacer M'Sirdi, Rachid Outbib, Marie-Cécile Péra, Daniel Roger, Mounaim Tounzi, Christophe Turpin, Jean-Claude Vannier, Paul-Etienne Vidal

ICEM'2012 Technical Tracks TPC-1 Classical rotating field machines (Co-Chairs: Frédéric Gillon, Gianmario Pellegrino, Dave Dorrell) TPC-2 Innovative machines and actuators (Co-Chairs: Jean-François Rouchon, Akira Chiba, Yve Perriard) TPC-3 Electrical drives (Co-Chairs: Bruno Robert, Radu Bojoi, Peter Omand Rasmussen) TPC-4 Design and related problems (Co-Chairs: Noureddine Takorabet, Andrea Cavagnino, Ayman El-Refaie) TPC-5 Condition monitoring, diagnosis (Co-Chairs: Raphael Romary, Fabio Giulii Capponi, Mario Pacas) TPC-6 Embedded applications (Co-chairs: Christophe Forgez, Chris Gerada, Leila Parsa) TPC-7 Grid-connected or emergency applications (Co-chairs: Marc Petit, Marcello Pucci, Josep Guerrero)

8

General information Location ICEM’2012 will be organized in the Palais des Congrès et des Expositions de Marseille which occupies a 17 hectares in the heart of the city. Just a few minutes from the Prado beaches and the Old Port, the Parc Chanot benefits from an exceptional location in the centre of one of the largest metropolitan areas in Southern Europe. The TGV station and Marseille Provence International Airport mean that access to the city is comfortably easy. The Palais des Congrès et des Expositions de Marseille is located at: SAFIM – Parc Chanot Rond Point du Prado – 13008 Marseille, France www.parc-chanot.com Access from Marseille Provence Airport In front of terminals 3 and 4, take the bus shuttle to Marseille St Charles train station and then the metro to station Rond-Point du Prado (direction Sainte-Marguerite Dromel): around 45 minutes Access from the Gare St Charles From the Marseille St Charles train station, take the metro to the station Rond-Point du Prado (direction Sainte-Marguerite Dromel): around 15 minutes Access by car For those coming by car, it is strongly advised to park the car in the surrounding areas (parking are available) and to reach the Palais des Congrès et des Expositions de Marseille by the metro. It is very difficult to circulate and to park a car in Marseille downtown. Official language The official language of the conference is English for presentations, discussions and conference activities. For the individuals having English as mother language, please do make the effort to be clear enough to be understood by the others. Attendees’ identification All public buildings in France have limited access for security reason (Vigipirate). In this way, all the ICEM’2012 attendees have to bring with them their ID Card or their passport which has to be shown to any security officer upon request. These documents will be also mandatory for the technical visit. Tutorials All the five tutorials will be organized on September 2, 2012. The access to tutorials is free for any attendee registered to ICEM’2012 (student or regular). Any tutorial attendee has to bring his/her own laptop in order to download the tutorial material. No printed documents will be provided. Weather The month of September is just the end of the summer and temperature can be still hot during the day (25°C-30°C) and a bit cooler in the evening (17°C-20°C). Please do check to the Marseille forecast before travelling to avoid unexpected inconvenience. 9

Daily conference breaks Coffee breaks will be served in the morning and in the afternoon on September 2-4 in the Palais des Congrès et des Expositions (see conference program) close to the poster sessions and the exhibition (first floor). Welcome reception A welcome reception will be organized on Sunday September 2, 2012 in the Palais des Congrès et des Expositions close to the poster sessions and the exhibition (first floor). Please don’t miss this informal event you will surely meet new friends and colleagues! Gala dinner The gala dinner will be organized on Tuesday September 3, 2012 in the in the Palais des Congrès et des Expositions (floor 0). The award ceremony and the presentation of the 2014 edition of ICEM will be held during the gala dinner. Dressing could be casual. Lunches Light lunches (French sandwiches) will be provided on September 2-4, 2012 at the first floor of the Palais des Congrès et des Expositions close to the Poster Sessions. Attendees are expected to visit the booths of the poster sessions during the lunch time. Technical visit A technical visit of the world project ITER has been organized on September 5, 2012. It is the first time that such a large number of visitors will be accepted inside the ITER site. ICEM’2012 participants will not be allowed to register at the last moment since they have to be identified on site with a list provided long time in advance. The visit program will start at 8:00am in front of Stade Velodrome (close to the conference centre) and it is expected to be completed at 7:00pm by returning by buses at the same place. A stop at the Marseille Provence airport on the way back will be possible upon request. Paper presentation In ICEM’2012 Proceedings, there will be no difference in between oral and poster presentations. All papers will be treated in the same way and will be available in the IEEEXplore after the conference only if presented. Oral All the authors presenting a paper in oral are kindly requested to meet their co-chairs in the session room 15 minutes before the session schedule in order to download their presentation in the computer available in the room. They have to provide the co-chairs with a single PDF file of their presentation bring on a USB key. It is not possible to change of computer in between presentations. The length of the presentation is restricted to 20 minutes including questions. The authors presenting a paper are strongly advised to keep their oral presentation within 15 minutes (15 to 20 slides) and to let 5 minutes for questions. They have to verify that their bio has been printed in their final version otherwise they have to bring a short printed bio of 10 lines maximum to the session co-chairs. Poster A poster preparation is a difficult but rather interesting exercise. It is not allowed to simply pin up a simple copy of the published paper. The provided template has a A0 European size (119cm height, 84cm width). Please do remain strictly in these 10

dimensions. Each poster will be hanged by the presenters using material provided by conference organizers. A poster display will catch the eye of the viewer (large figures), present a logical sequence of material in an attractive visual way and does not require the reader to examine a detailed text. During the schedule breaks (coffee and lunches), authors have to remain at near their poster in order to engage a direct discussion with the conference delegates. Session chairs All the session chairs (regular and special sessions) are kindly requested to bring their own laptop with them. The only requirement is to have a laptop with the Adobe Acrobat Reader® 10.0 or higher with European embedded fonts and a plug to connect the video projector. They will have the responsibility of downloading the author presentations at least 15 minutes before the beginning of the session. The authors have to provide them with a USB Key with their PDF presentation inside and a short bio (max. 10 lines) in order to be introduced. For poster sessions, the session co-chairs will have to identify the no-shows and to evaluate poster presentation and attendance being in the place. The session chairs have the responsibility to make the schedule strictly respected. Each presentation plus questions have to be presented within a period of 20 minutes. In case of “no show”, session co-chairs have to wait 20 minutes for the next paper or to close the session if it is the last paper. Each session chair has to fill a form (one by session oral/poster) for session evaluation and to bring it back to the registration desk. All the rooms will be equipped with a video projector and a screen. The session chairs will be assisted by one conference organization member in each room from the beginning of the session up to the end. If needed, a laptop will be provided by the conference organizers. Internet access No free internet wireless access will be provided to ICEM’2012 participants. Please do bring with you a laptop with Wi-Fi facilities. Any participant can purchase a short period access USB key 3G Internet (by using the French cellular phone network) available in any Phone shop.

11

12

Program at a glance

13

Conference room distribution

14

Sunday 2nd of September Tutorials TU 1: Fault Diagnosis, Prognosis and Reliability of Electrical Drives Room: Morgiou - Hour: 10:00-12:00 Lecturer: Elias Strangas, USA

TU 2: Life-Cycle Cost Optimization in Variable-Speed-Driven Pump and Fan Systems Room: Sormiou - Hour: 10:00-12:00 Lecturers: Jero Ahola, Tero Ahonen, Finland

TU 3: Improving Motor Efficiency and Motor Miniaturization - The Role of Thermal Simulation Room: Morgiou - Hour: 13:30-18:00 Lecturer: Dave Staton, UK

TU 4: Design and Testing of Insulation for Adjustable Speed Drives Room: Sormiou - Hour: 13:30-18:00 Lecturer: Alfredo Contin, Italy

TU 5 - Tutorial: Superconducting Machines - History and Latest Developments of Superconducting Machines Room: Riou - Hour: 13:30-18:00 Lecturers: Bogi Bech Jensen, Philippe J. Masson, Denmark/USA

Poster session 1 Room: Poster & Exhibition (first floor) - Hour: 10:00-18:00 Co-chairs: Metin Aydin, Franck Betin, Augusto Di Napoli FF-001074: A Brushless Doubly Fed Induction Machine with Flat Plane Rotary Transformers Mauricio Ruviaro, Fredemar Runcos, Brazil FF-003816: Analysis of efficiency characteristics of squirrel-cage induction motor for pump application Leszek Szychta, Radoslaw Figura, Poland FF-004286: Use of Infrared thermography for computation of heating curves and preliminary failure detection in induction motors 15

Maria Jose Picazo-Rodenas, Rafael Royo, Jose Antonino-Daviu, Jose RogerFolch, Spain FF-005533: Optimal Design of power traction Induction Motor using Response Surface Method Kwangdeok Kim, Yun-Ho Jeong, Yong Jae Kim, Kyung-Won Jeon, Sang-Yong Jung, South Korea FF-005991: Optimization of a Three Phase Induction Motor with Outer Rotor for Multi-speed Applications Bogdan Virlan, Alecsandru Simion, Leonard Livadaru, Seifeddine Ben Elghali, Rachid Outbib, Romania/France FF-008451: Realization of a "3 & 6 Phase" Induction Machine Pierre-Jac Venter, Adisa A. Jimoh, Josiah L. Munda, South Africa FF-009423: Optimal Sizing of Static Converters for Single Phase Feeding of Three Phase Induction Motor Jose Daniel Lara, Ignacio Vieto, Costa Rica FF-009911: Genetic Algorithm Based Design Optimization of a Three-Phase Multiflux Induction Motor S.S. Sivaraju, J.T.E. Ferreira Fernando, N. Devarajan, India/Portugal FF-012017: Experience in China on the Die-Casting of Copper Rotors for Induction Motors Daniel Liang, Jiabin Yu, Xu Yang, Victor Zhou, USA/China FF-002186: Characteristics Analysis of Matrix-Rotor Induction Motor Using Parallel Computing System Yoshihiro Kawase, Tandashi Yamaguchi, Ken Tanaka, Masaki Otsubo, Naotaka Toida, Koichi Sato, Japan FF-011347: Dynamic Induction Machine Model Accounting for Stator and Rotor Slotting Gojko Joksimovic, Jaksa Riger, Thomas Wolbank, Nedjeljko Peric, Mario Vasak, Goran Stocic, Vinko Lesic, Montenegro/Austria/Croatia FF-005932: The magnetic noise of the inverter-fed permanent split-capacitor induction motor Andrei Negoita, Abdoul N'Diaye, Abdesslem Djerdir, Romania/France FF-000035: Loss Reduction of a Canned Switched Reluctance Machine Qiang Yu, Christian Laudensack, Dieter Gerling, Germany FF-002917: Basic Consideration of Switched Reluctance Motor with Auxiliary Windings and Permanent Magnets Yu Hasegawa, Kenji Nakamura, Osamu Ichinoku, Japan FF-006092: Evaluation of torque-speed curve of switched reluctance motor with segmental rotor M'Hamed Belhadi, Ali Kolli, Guillaume Krebs, Claude Marchand, France FF006939: Criteria for design of high performance switched reluctance motor Vandana Rallabandi, Saurabh Nikam, B.G. Fernandes, India FF-011029: Analysis of Different Winding Topologies for Canned Switched Reluctance Machines 16

Christian Laudensack, Qiang Yu, Dieter Gerling, Germany FF-11282: Winding Configurations for a Six Phase Switched Reluctance Machine James Widmer, Richard Martin, Christopher Spargo, Barrie Mecrow, Tuncay Celik, United Kingdom FF-005681: Electromagnetic Design Optimization of a Low Speed Slotted Switched Reluctance Machine using Genetic Algorithm Luc Moreau, France FF-009245: Impact of Command Parameters on Efficiency, Torque Ripple and Vibrations for Switched Reluctance Motor Ali Kolli, Guillaume Krebs, Xavier Mininger, Claude Marchand, France FF-002542: Design and FEM Analysis of Five-Phase Permanent Magnet Generators for Gearless Small-Scale Wind Turbines Ana-Maria Mihai, Seifeddine Benelghali, Alecsandru Simion, Rachid Outbib, Leonard Livadaru, Romania/France FF-003611: Determination of equivalent circuit parameters in a direct drive wind power generator Frank Brasas, Johannes Germishuizen, Germany FF-005436: The Fundamental Design Technique of Switched Reluctance Motors, and Comparison with PMSM Tomoya Ishikawa, Hideo Dohmeki, Japan FF-005177: Combined Stator Windings in Electric Machines with Same Coils Henning Kasten, Wilfried Hofmann, Germany FF-008834: Design and Implementation of a Variable Speed Wind Turbine Emulator Jonathan Nye, Eskom, Jacques de la Bat, Mohamed Khan, Paul Barendse, South Africa FF-005622: Characterization of Radial Magnetic Forces in Low-Speed Permanent Magnet Wind Generator with Non-Overlapping Concentrated Windings Mostafa Valavi, Arne Nysveen, Robert Nilssen, Norway FF-010146: Theoretical study and Experimental Validation of a Wind Energy Conversion System Control with Three-Level NPC Converters Tarak Ghennam, Algeria FF-011576: A Doubly Fed Induction Generator for Wind Stand-Alone Power Applications (Simulation and Experimental Validation) Tedjani Mesbahi, Algeria FF-007986: Variable Speed Wind Turbine Generator-Three Level VSI Interface Georgios Adamidis, Thomas Nathenas, Greece FF-001546: New Controller Design for PMSG Based Wind Generator with LCLFilter Considered Marwan Rosyadi, S. M. Muyeen, Rion Takahashi, Junji Tamura, Japan/United Arab Emirates 17

FF-003689: Small Signal Stability Analysis of Fixed Speed Wind Generator including SDBR Mohammad Hasanuzzaman Shawon, Ahmed Al Durra, S.M. Muyeen, United Arab Emirates FF-001791: Design Preliminaries for Direct Drive under Water Wind Turbine Generator Krisztina Leban, Ewen Ritchie, Alin Argeseanu, Denmark/Romania FF-006009: FEM Analysis upon Significance of Different Permanent Magnet Types Used in a Five-Phase PM Generator for Gearless Small-Scale Wind Ana-Maria Mihai, Seifeddine Ben Elghali, Leonard Livadaru, Alecsandru Simion, Rachid Outbib, Romania/France FF-006351: Flux Density Analysis of Using Halbach Array in MW Level Permanent Magnet Synchronous Generators for Wind Turbines: A Preliminary Linear Model Salem M Alshibani, Rukmi Dutta, Vassilios G Agelidis, Australia FF-001422: Magnetic Field and Stress Analysis of Interior Permanent Magnet Motor with Off-Centered Rotor Using 3-D Finite Element Method Yoshihiro Kawase, Tadashi Yamaguchi, Yuki Ono, Wataru Koyanagi, Masanori Nakamura, Japan FF-006947: Inductances Estimation in the d-q Axis for an Interior PermanentMagnet Synchronous Machines with Distributed Windings Abdessamed Soualmi, Frédéric Dubas, Andry Randria, Christophe Espanet, France FF-007846: Impact of bonded magnets adoption on fractional machines efficiency Luca Ferraris, Fausto Franchini, Emir Poković, Alberto Tenconi, Italy FF-008605: Influence of Rotor Magnet Variations in Concentrated Winding IPMSM Shah Rahman, Babak Vaseghi, Andrew Knight, Canada FF-008257: Eddy Current Loss Calculation in Rotor Back Iron for Concentrated Winding PM Generator M. Firmansyah, A. Jassal, H. Polinder, D. Lahaye, Netherlands FF-011096: Design of Stator Core Shape of ‘Magnetic Anisotropic Motor’ Keisuke Fujisaki, Kohei Fujitani, Japan FF-001333: Comparison of Different Designs of Synchronous Reluctance Machines with High-Anisotropy Rotors Erich Schmidt, Austria FF-007862: Effect of Magnets on Average Torque and Power Factor of Synchronous Reluctance Motors Dany Prieto, Benjamin Dagusé, Philippe Dessante, Pierre Vidal, Jean-Claude Vannier, France FF-000477: Iterative Procedure for Determination of Synchronous Generator Load Point Using Finite Element Method Miroslav Petrinic, Stjepan Car, Ante Elez, Croatia 18

FF-010847: Modification of Synchronous Generator Cooling System Control Igor Erceg, Damir Sumina, Mario Vrazić, Croatia FF-005312: An Improved Model of Synchronous Generator Based on Finite Element Method Analysis Branko Tomičić, Stjepan Car, Eljko Tih, Croatia FF-005487: Synchronous Turbo-Generator Model Accounting for Rotor Whirl Gojko Joksimovic, Montenegro FF-009571: A Novel and Fundamental Approach towards Field and Damper Circuit Parameter Determination of Synchronous Machine Kaushik Mukherjee, Lakshmi Varaha Iyer, Xiaomin Lu, Narayan Kar, Canada FF-006378: An Investigation of the Use of Halbach Array in MW Level Permanent Magnet Synchronous Generators Salem M Alshibani, Rukmi Dutta, Vassilios G Agelidis, Australia FF-008869: Influence of the Air Gap Length on the Magnetic Core Loss in Large Hydro Generator Ana Aguiar, Arezki Merkhouf, Kamal Al-Haddad, Canada FF-001651: Prediction of Field Currents in Flux-Modulating Synchronous Machines under Loaded Conditions Tadashi Fukami, Kazuo Shima, Toshihiro Tsuda, Mitsuhiro Kawamura, Japan FF-001104: Effect of Pole and Slot Number Changes on the Performance of a Surface PM Machine Chun Tang, Wen L. Soong, Gene S. Liew, Nesimi Ertugrul, Australia FF-001716: Performance Investigation and Comparison of Line Start-up Permanent Magnet Synchronous Motor with Super Premium Efficiency Xueqing Feng, Yaxing Bao, Lijun Liu, USA/China FF-002178: Permanent Magnet Motors to Change Poles and Machine Constants Kazuto Sakai, Hisanori Hashimoto, Japan FF-003808: d-q Space Vector Analysis for Line-Starting Permanent Magnet Synchronous Motors Akeshi Takahashi, Satoshi Kikuchi, Hiroyuki Mikami, Kazumasa Ide, Andreas Binder, Japan/Germany FF-003913: An Improved Physical Phase Variable Model for Permanent Magnet Machines Martin Mohr, Oszkár Bíró, Andrej Stermecki, Franz Diwoky, Austria FF-006394: Single-Phase Line-Start Permanent-Magnet Motors with Start-Up and Synchronization Capabilities under Full-Load Torque Kazumi Kurihara, Tomotsugu Kubota, Daisuke Nitawaki, Fumiya Nii, Japan FF-006424: A Method for Optimizing the Design of SPM Type Magnetic Gear Based on Reluctance Network Analysis Michinari Fukuoka, Kenji Nakamura, Osamu Ichinokura, Japan FF-003328: Design, Analysis and Experimental Verification of a Permanent Magnet AC Servomotor for Mobile Robot Applications 19

Oguzhan Ocak, Baris T. Ertugrul, Eyyup Sincar, Cuneyt Oysu, Metin Aydin, Turkey FF-005339: Inset-Consequent and Inset Rotors for Line Start Permanent Magnet Synchronous Motor Rajaram Ugale, Bhalachandra Chaudhari, Srinivas Baka, India FF-008702: Evaluation of Calculation Methods and the Effect of End-Winding Inductance on the Performance of Non-Overlap Winding PM Machines Johannes Potgieter, Maarten Kamper, South Africa FF-010782: Modeling and permanent-magnet shape optimization of an axialflux machine Adrian Pop, Frederic Gillon, Mircea Radulescu, France/Romania FF-008567: Analysis of non-uniform circumferential segmentation of magnets to reduce Eddy-current losses in SPMSM machines Patxi Madina, Javier Poza, Gaizka Ugalde, Gaizka Almandoz, Spain FF-011142: Fast computation of ripple torque for PM synchronous traction machines Martin Cantegrel, France FF-006157: Harmonic Wave Model of a Permanent Magnet Synchronous Machine For Modeling Partial Demagnetization under Short Circuit Conditions Christian Kral, Anton Haumer, Maxim Bogomolov, Elena Lomonova, Austria/Netherlands FF-006599: Design Considerations for an Outer Rotor, Field Wound, Flux Switching Machine Michael Galea, Chris Gerada, Tahar Hamiti, United Kingdom FF-006629: Design and Applications of the Synchronized Motion Controller for Tapping Processes Chao-Fu Yeh, Wei-Sheng Huang, Chih-Han Kuo, Pau-Lo Hsu, Taiwan FF-006785: Analytical Time-Harmonic Approach to Calculate Rotor EddyCurrent Losses due to Stator Harmonics Xiaoli Cui, Johann Haldemann, Switzerland FF-001503: Power Oscillations in Hydropower Units Zlatko Maljković, Ivan Gaparac, Mario Vraić, Croatia FF-001589: An Advanced Teaching Lab for the Setting up of an Islanded Production Unit André Hodder, Basile Kawkabani, Switzerland FF-001805: A consideration on loss characteristics and annual capacity factor of offshore wind farm Naoya Inaba, Rion Takahashi, Junji Tamura, Mamoru Kimura, Akiyoshi Komura, Kenji Takeda, Japan FF-002674: On the Development of Flywheel Storage Systems for Power System Applications: A Survey Mohamed I. Daoud, Ayman S. Abdel-Khalik, Ahmed M. Massoud, Shehab Ahmed, Nabil H. Abbasy, Qatar/Egypt FF-002763: Properties of novel traction polyphase rectifier transformer 20

Andrzej Sikora, Barbara Kulesz, Poland FF-004928: Study on High-Efficiency of the Reactor used for Boost Converter Toru Nakanishi, Hideo Dohmeki, Japan FF-005738: Load identification from Power Recordings at Meter Panel in Residential Households Kaustav Basu, Vincent Debusschere, Seddik Bacha, France FF-008826: Review and Application of Micromachines for Wind Energy Integration Ramzi Solomon, Mohamed Khan, Paul Barendse, Pragasen Pillay, Komla Folly, Canada/South Africa FF-009466: Advanced Modeling and Control of a Wave Energy Conversion System Jerome Leclerc, Philippe Dumee, Nikolaos Kimoulakis, Antonios Kladas, France/Greece FF-003883: Comparison of Permanent Magnet Generators for a Very Low Speed Renewable Energy Application David G. Dorrell, Sze S. Ngu, Calum Cossar, Australia/United Kingdom FF-001627: Super-Multipolar Permanent Magnet Reluctance Generator Designed for Small-Scale Renewable Energy Generation Kenji Nakamura, Osamu Ichinokura, Japan FF-006742: Contribution of LCA approach to the choice of rotating electrical machines for environmental impact minimization Walid Boughanmi, Jean Paul Manata, Daniel Roger, France FF-004057: Study and Analysis of an Electromagnetic Energy Recovery Damper (EERD) for Automotive Applications Mustapha Zaouia, Nacereddine Benamrouche, Abdesslem Djerdir, Algeria/France FF-004596: Design and Optimization of a Permanent Magnet Axial Flux Wheel Motors for Electric Vehicle Application Noureddine Takorabet, Jean-Philippe Martin, Farid Meibody-Tabar, Fadi Sharif, Pascal Fontaine, France FF-007889: A Rotary-Linear Switched Reluctance Motor for Automotive Applications Lorand Szabo, Ioana Bentia, Mircea Ruba, Romania FF-007145: Design Optimization of 8/14 Switched Reluctance Machine for Electric Vehicle Mirsad Cosovic, Senad Smaka, Iris Salihbegovic, Semsudin Masic, Bosnia and Herzegovina FF-010375: Outer Rotor Switched Reluctance Motor Design for In-wheel Drive of Electric Bus Applications Anas Labak, Narayan C. Kar, Canada FF-003093: Magnetic Field-Electric Circuit Coupled Method for brush DC motor simulations 21

Raphael Andreux, Julien Fontchastagner, Noureddine Takorabet, Nicolas Labbe, Jean-Sebastien Metral, France FF-005835: Optimal design procedure for an external rotor permanent-magnet machine Juan Tapia, Asko Parviainen, Juha Pyrhönen, Pia Lindh, Rogel Wallace, Chile/Finland FF-006262: Design study of magnet shapes for axial Halbach arrays using 3D Finite Element Analyses Oliver Winter, Christian Kral, Erich Schmidt, Austria FF-000116: Numerical Simulations of Rotor Dynamic Eccentricity Effects on Synchronous Machine Vibrations for Full Run Up Pierre Pellerey, Vincent Lanfranchi, Guy Friedrich, France FF-000701: Unipolar flux in bearingless two-pole machine Anssi Sinervo, Tommi Jokela, Antero Arkkio, Finland FF-001031: Development of a full parameterized FE-modeling tool for efficient vibration investigations on end windings of Turbo- and Hydro- Generators Bernd Schlegl, Christian Scheinecker, Andreas Marn, Fritz Neumayer, Mario Himmelreich, Franz Heitmeir, Austria FF-002895: Identifying cogging torque harmonics affected by misalignment in axial flux fractional pitch PMSM Mark Thiele, Greg Heins, Australia FF-003271: Cogging Torque Estimation for Sensorless PMSM Ben Saunders, Greg Heins, Mark Thiele, Friso de Boer, Australia FF-008133: Magnetic Forces and Vibrational Behavior Analysis for Flux Switching Permanent Magnet Machines Julien Boisson, Francois Louf, Javier Ojeda, Xavier Mininger, Mohamed Gabsi, France FF-010693: Estimation of relative Magnetostriction and Maxwell’s forces in stacked Grain Oriented steel structures Rémi Penin, Jean Philippe Lecointe, Guillaume Parent, Jean-François Brudny, Thierry Belgrand, France FF-004413: Reducing the Cogging Torque of PM Transverse Flux Machines by Discrete Skewing of a Segmented Stator Florian Dreher, Nejila Parspour, Germany FF-009504: Research on Vibration Analysis and Noise-Reduction Technique of PM Motor Eri Zeze, Kan Akatsu, Japan FF-005363: Torque Ripple Reduction in Five-Phase Induction Machines Using Mixed Winding Configurations Mbika Muteba, Adisa Abdul-Ganiyu Jimoh, Dan Valentin Nicolae, South Africa FF-008664: Torsional Behaviour of Large Synchronous Machines during Asynchronous Start-Up and System Disturbances Michael Freese, Jens Rosendahl, Stefan Kulig, Germany 22

Monday 3rd of September Registration Room: Poster & Exhibition (first floor) - Hour: 8:00-10:00

Opening ceremony Room: Callelongue - Hour: 10:00-12:00 Welcome speeches Keynote lectures (Co-chairs: Aldo Boglietti, Bertrand Nogarede) Railway traction motors Daniel L. Cadet ALSTOM Transport, France Electricity transportation in Europe X. Xxxxxxxxxx, RTE, France

Poster session 2 Room: Poster & Exhibition (first floor) - Hour: 10:00-18:00 Co-chairs: Mohamed Boussak, Rosario Miceli, Henk Polinder FF-010545: Modelling of piezoelectric actuators used in forging processes: principles and experimental validation Thanh Hung Nguyen, Christophe Giraud-Audine, Betty Lemaire-Semail, Gabriel Abba, Régis Bigot, Ensam, France FF-002097: Scaling studies of High Speed High Temperature Superconducting Generator Murtuza Lokhandwalla, Kiruba Sivasubramaniam, James Alexander, USA FF-002127: Empirical modeling of a squeeze film haptic actuator Christophe Winter, Miroslav Markovic, Yves Perriard, Switzerland FF-008923: Comparison of Analytical and FE Modeling of Vernier Hybrid Machine Luca Papini, Chris Gerada, Paolo Bolognesi, UK/Italy FF-000574: Study on Improvement in the Motor Property by the Difference in the Fabrication Density of the Soft Magnetic Composite Koji Ikeda, Hideo Dohmeki, Japan FF-006432: Scaling the virtual air gap principle to high voltage large power applications Jesus Avila Montes, Enrique Melgoza Vazquez, Mexico FF-007978: Energy Transfer on Rotating Shafts Using PM-Printed Winding Machine Marco Bassetti, Francesco Braghin, Francesco Castelli-Dezza, Matteo F. Iacchetti, Matteo M. Maglio, Italy FF-009474: Large-diameter Ironless Permanent Magnet Generator for Offshore Wind Power Application 23

Zhaoqiang Zhang, Alexey Matveev, Robert Nilssen, Arne Nysveen, Norway FF-009016: Design of an arch-shaped FSPM Generator for the Seaquest Concept Alberto Serena, Marta Molinas, Norway FF-003255: Design Optimisation of a Transverse Flux, Short Stroke, Linear Generator Louis Joubert, Jacques Schutte, Johannes Strauss, Robert Dobson, South Africa FF-005096: Magnet Segmentation in Tubular Linear Motors Flavio Kalluf, Cristofaro Pompermaier, Mauricio Luz, Aleandro Espindola, Brazil/Sweden FF-003077: Transverse Flux Type Cylindrical Linear Synchronous Motor for Large Thrust Using Generic Armature Cores for Rotary Machinery Jung-Seob Shin, Takafumi Koseki, Houng-Joong Kim, Korea FF-003123: Constrainted optimisation of a transverse flux PM linear generator J Schutte, L.H. Joubert, J.M. Strauss, South Africa FF-001317: Magnetic Gearbox with an Electric Power Output Port and Fixed Speed Ratio for Wind Energy Applications Ayman Abdel-Khalik, Shehab Ahmed, Ahmed Massoud, Ahmed Abbas, Egypt/Qatar FF-001325: A Coaxial Magnetic Gearbox with Magnetic Levitation Capabilities Ayman Abdel-Khalik, Ahmed Massoud, Ahmed Abbas, Shehab Ahmed, Egypt/Qatar FF-001821: Analysis of the Bearingless AC Homopolar Motor Eric L. Severson, Robert K. Nilssen, Tore M. Undeland, Ned Mohan, USA/Norway FF-004294: Proposal of an Axial-Type Magnetic-Geared Motor Noboru Niguchi, Katsuhiro Hirata, Ariff Zaini, Shingo Nagai, Japan FF-010073: Rotor Structure Suppressing Suspension Force Ripple in an IPM Type Bearingless Motor with 2-pole Motor Windings and 4-pole Suspension Windings Tatsuya Matsuzaki, Masatugu Takemoto, Satoshi Ogasawara, Satoru Ota, Kazunobu Oi, Daiki Matsuhashi, Japan FF-002089: Design and optimization of a Permanent Magnet Transverse Flux Machine Cristofaro Pompermaier, Lars Sjöberg, Göran Nord, Sweden FF-005037: A Global Approach for the Design of a Rim-Driven Marine Turbine Generator for Sail Boat Laurent Drouen, Jean-Frederic Charpentier, Eric Semail, Stephane Clenet, France FF-005746: Novel Rotor Design Optimization of Synchronous Reluctance Machine for Low Torque Ripple Reza Rajabi Moghaddam, Freddy Magnussen, Chandur Sadarangani, Sweden 24

FF-006297: Performance Comparison between Switching-Flux and IPM Machine with Rare Earth and Ferrite PMs Alessandro Fasolo, Luigi Alberti, Nicola Bianchi, Italy FF-006467: Design and Optimization of Permanent Magnet Switch Reluctance Machine for Renewable Energy Application Hanzhou Liu, Thomas Wu, Jon Harms, Martin Epstein, Tad Chalfant, Louis Chow, Wei Wu, Yuanli Bai, Yang Hu, Anthony Camarano, USA FF-007013: Comprehensive Comparison of Novel Stator Surface-mounted Permanent Magnet Machines Zhang Yilian, China FF-000299: Sensorless Variable Speed Single-Phase Induction Motor Drive System Based on Direct Rotor Flux Orientation Massimo Caruso, Vittorio Cecconi, Antonino Di Tommaso, Ronilson Rocha, Italy/Brazil FF-000868: Discrete Time Sliding Mode Observers for Sensorless Vector Control of PMSM Thiago Bernardes, Humberto Pinheiro, Hilton Grundling, Brazil FF-001813: Speed Sensorless Sliding Mode Observer for Three-Phase Induction Motor Cristiane Cauduro Gastaldini, Rodrigo Padilha Vieira, Rodrigo Zelir Azzolin, Hilton Abílio Grundling, Brazil FF-002224: Maximum Generation Control System for Sensorless Wind Turbine Generator Yoko Amano, Japan FF-002852: A Novel Starting Method for Sensorless Brushless DC Motors with Current Limitation Cassio Luciano Baratieri, Humberto Pinheiro, Brazil FF-009342: A Sensorless Commutation Technique of a Brushless DC Motor Drive System Using Two Terminal Voltages in Respect to a Virtual Neutral Potential Savvas Tsotoulidis, Athanasios Safacas, Greece FF-005975: Identification of time-variant high frequency parameters for sensorless control of PMSM using an internal model principle based HF current control Markus Seilmeier, Andreas Boehm, Bernhard Piepenbreier, Ingo Hahn, Germany FF-009326: Current Self-Control Applied to Sensorless Permanent Magnet Synchronous Generators Daniel Collier, Marcio Ortmann, Marcelo Heldwein, Brazil FF-005584: Torque Dynamics in Sensorless PMSM Drives Shuang Zhao, Oskar Wallmark, Sweden FF-008265: Full Speed Range Sensorless IPM Motor Drives Adriano Faggion, Silverio Bolognani, Emanuele Fornasiero, Luca Sgarbossa, Italy 25

FF-009008: Implementation and tuning of the Extended Kalman Filter for a sensorless drive working with arbitrary stepper motors and cable lengths Mark Butcher, Alessandro Masi, Michele Martino, Andrea Tacchetti, Switzerland/USA FF-009318: Sensorless Speed Control of an Outrunner PMSM drive Connected to Long Cable for Flying Remote Operative Vehicle Moussa Bendjedia, Amor Khlaief, Mohamed Boussak, France FF-011967: Sensorless Speed Control with MRAS for Induction Motor Drive Youssef Agrebi Zorgani, Yassine Koubaa, Mohamed Boussak, Tunisia/France FF-000639: An ANN Strategy Applied to Induction Motor Speed Estimator in Closed-Loop Scalar Control Tiago Henrique Santos, Alessandro Goedtel, Sérgio Augusto Oliveira Silva, Marcelo Suetake, Brazil FF-001295: Energy saving for induction motor control by extremum seeking Thomas Devos, François Malrait, Rodolphe Sepulchre, France/Belgium FF-002038: Evaluation of the Rotor Bar and End Ring Current Waveform of a Brush DC Equivalent Controlled Multiphase Cage Rotor Induction Machine Nkosinathi Gule, Maarten J. Kamper, South Africa FF-002569: Torque Ripples Reduction of Five-Phase PMSM using Fractional Order Regulator Abdoulaye Dieng, Mohamed Fouad Benkhoris, Mourad Ait-Ahmed, France FF-002607: Electric braking in BLDC motors with windings partially and electronically shunted Aleksander Frechowicz, Poland FF-003476: Identification of Rotor Resistance and Transient Inductance of Induction Motors Using Frequency Selection Criterion Martin Jadric, Bozo Terzic, Marin Despalatovic, Goran Majic, Alojz Slutej, Toni Simic, Croatia/Sweden FF-003549: Fault-Tolerant Control Strategies for Quad-Inverter Induction Motor Drives with One Failed Inverter Gabriele Grandi, Padmanaban Sanjeevikumar, Yasser Gritli, Fiorenzo Filippetti, Italy FF-004251: A Nearly Constant Switching Frequency Current Hysteresis Controller with Generalized Parabolic Boundaries using 12-sided Polygonal Voltage Space Vectors for IM drives K. Gopakumar, Najath Abdul Azeez, Anubrata Dey, Mathew K, Jaison Mathew, India FF-004812: Hybrid Control of the Two-Phase Induction Machine Kenza Bouhoune, Krim Yazid, Mohamed Seghir Boucherit, Algeria FF-004979: High Performance Controller for Multiphase Brushless DC Motor Milena Dias, Jean Patric da Costa, Hauke Einfeld, Peter Zacharias, Germany FF-005185: Dynamic Modeling and Control of a Brushless Doubly-Fed Induction Generator with a Rotating Power Electronic Converter Naveed ur Rehman Malik, Chandur Sadarangani, Sweden 26

FF-005193: Behavior of a Brushless Doubly-Fed Induction Generator with a Rotating Power Electronic Converter during Symmetrical Voltage Sags Naveed ur Rehman Malik, Chandur Sadarangani, Sweden FF-005401: Space Vector Modulation Algorithm for Large Electric Drives Thomas Nathenas, Georgios Adamidis, Greece FF-005908: A Rotor Resistance MRAS Estimator for Induction Motor Traction Drive for Electrical Vehicles Ferdinando Mapelli, Alberto Bezzolato, Davide Tarsitano, Italy FF-006718: Minimization of Torque Ripple in Switched Reluctance Motor Drives Using an Enhanced Direct Instantaneous Torque Control Javier Castro, Pere Andrada, Balduí Blanqué, Spain FF-006858: Online Identification of Parameters Defining the Saturation Characteristics of Induction Machines Mikaela Ranta, Marko Hinkkanen, Finland FF-007056: Extended Voltage Range AC Drive using a Z Source Indirect Matrix Converter Sergio Sousa, Sonia Pinto, Fernando Silva, Jose Maia, Portugal FF-007838: Torque Ripple Minimization for PMSM using Online Estimation of the Stator Resistances Yanhui Xu, Nejila Parspour, Ulrich Vollmer, Germany FF-008168: Sine Wave Filter For Stepper Motor Drives Working With Long Cables Ricardo Picatoste, Mark Butcher, Alessandro Masi, Switzerland FF-008346: Analysis and Comparison of PWM Modulation Methods in VSI-Fed PMSM Drive Systems Maitane Aguirre, Patxi Madina, Javier Poza, Aitor Aranburu, Txomin Nieva, Spain FF-008486: Calorimetric Measurement of Variable Speed Induction Motor Lassi Aarniovuori, Antti Kosonen, Markku Niemelä, Juha Pyrhönen, Finland FF-008532: Eigenvalues Analysis Applied to the Stability Study of a Variable Speed Pump Turbine Unit Michel Han, Basile Kawkabani, Jean-Jacques Simond, Switzerland FF-009539: A Simplified Characterization Method Including Saturation Effects for Permanent Magnet Machines Jorge G. Cintron-Rivera, Andrew S. Babel, Eduardo E. Montalvo-Ortiz, Shanelle N. Foster, Elias G. Strangas, USA FF-009598: Parametric Sensitivity in the Analysis and Control of Permanent Magnet Synchronous Machines Andrew S. Babel, Shanelle N. Foster, Jorge G. Cintron-Rivera, Elias G. Strangas, USA FF-009776: Variable Speed Induction Generator connected to AC Grid using AC-DC-AC Structures controlled by LQ Current Regulators with Integral Action Ronilson Rocha, José Silvino, Peterson Resende, Brazil 27

FF-010278: Maximizing the Energy Efficiency of a PMSM for Vehicular Applications Using an Iron Loss Accounting Optimization Based on Nonlinear Programming Ali Rabiei, Torbjörn Thiringer, Johan Lindberg, Sweden FF-010359: Study on a BLDC Motor Having Higher Winding Inductance: a Key to Field Weakening Seray Senol, Ozgur Ustun, UK/Turkey FF-011355: Performance of two 5 MW Permanent Magnet Wind Turbine Generators Using Surface Mounted and Interior Mounted Magnets Poopak Roshanfekr, Torbjörn Thiringer, Mikael Alatalo, Sonja Lundmark, Sweden FF-011487: Study of the influence of the leading angle on the operating characteristics of a current source inverter fed synchronous motor drive system Vasile Manoliu, Romania FF-006203: Fine grain commutation: integrated design of permanent-magnet synchronous machine drives with highest torque density Arijit Banerjee, Jeffrey H. Lang, James L. Kirtley, USA FF-010561: Application of Artificial Intelligence Techniques to the Study of Machine Signatures Chen Wee-Yuan, Xu Jianxin, Sanjib Kumar Panda, Singapore FF-006416: Finite Element Transient Thermal Analysis of PMSM for Aerospace Applications Themistoklis D. Kefalas, Antonios G. Kladas, Greece FF-006637: Fault Tolerant Winding Design - A compromise Between Losses and Fault Tolerant Capability Puvan Arumugam, Tahar Hamiti, Chris Gerada, United Kingdom FF-008125: A flexible magnetic circuit dedicated to Hall Effect Thruster experiment Carole Henaux, Raphaël Vilamot, Laurent Garrigues, Dominique Harribey, France FF-011118: Thermo-mechanical coupling in Nitinol. Application to an electromorphing plate Maxime Chinaud, Amar Boussaid, Jean Francois Rouchon, Eric Duhayon, Enrico Deri, Dominique Harribey, Marianna Braza, France FF-007331: Condition Monitoring of Induction Motors fed by Voltage Source Inverters. Statistical Analysis of Spectral Data Oscar Duque-Perez, Luis Angel Garcia-Escudero, Daniel Morinigo-Sotelo, Pedro Esteban Gardel, Marcelo Perez-Alonso, Spain FF-011541: Time-Domain Approach for Fault Detection of Synchronous Generator Broken Damper Bar Abdelhalim Lalami, René Wamkeue, Canada FF-002054: Analytical Model tacking account the Cross Saturation for the Optimal Sizing of IPMSM 28

Sulivan Küttler, Khadija El-Kadri Benkara, Guy Friedrich, Franck Vangraefschèpe, Abdenour Abdelli, France FF-001309: Exact Analytical Prediction of Magnetic Field in a Hybrid and Wound Excitation Synchronous Machine Kamel Boughrara, Rachid Ibtiouen, Omar Touhami, Algeria FF-002534: Analytical Modeling of Flux-Switching Machines using Variable Global Reluctance Networks Yang Tang, Emilia Motoasca, Johan J. H. Paulides, Elena A. Lomonova, Netherlands FF-011789: Analytical model of magnet bars of surface permanent magnet slotless machine Youcef Boutora, Rachid Ibtiouen, Noureddine Takorabet, Algeria/France FF-003751: Mixed FEM2D - Analytical Method to Evaluate EMF and Torque in Surface PM Synchronous Machines Antonino Di Gerlando, Giovanni Foglia, Matteo Iacchetti, Italy FF-005886: Analytical Modeling and Simulation of Highly Utilized Electrical Machines Considering Nonlinear Effects Manuel Gaertner, Frieder Schuller, Nejila Parspour, Peter Seibold, Germany FF-006025: 2D Analytical Solution of Transverse Flux Induction Heating of the Aluminum Plates Youcef Ouazir, Ammar Abdi, Hakim Bensaidane, Algeria FF-006661: A winding function-based model of air-gap eccentricity in saturated induction motors Adel Ghoggal, Salah Eddine Zouzou, Mohamed Sahraoui, Hamid Derghal, Amel Hadri-Hamida, Algeria FF-009156: Analytical Thermal Modelling of Axial Flux Permanent Magnet Synchronous Machines Guillaume Verez, Huguette Tiegna, Georges Barakat, Ghaleb Hoblos, France FF-009288: Design approach of an axial flux motor for electrical powertrain vehicle Guillaume Krebs, Eric de Cecco, Claude Marchand, France FF-011851: Simulation of Arbitrary Fault-Conditions in PM-Machines by Generalized Unsymmetrical Modeling Johann Mayer, Dieter Gerling, Germany FF-002585: Modeling, Design and Simulation of Fuel Cell Modules for Small Marine Applications Nabil Benyahia, Toufik Rekioua, Nacer Benamrouche, Algeria FF-006459: Oscillating Generator for Hybrid-Electrical and Electrical Vehicles Sigitas Kudarauskas, Loreta Simanyniene, Lithuania FF-006106: Flux-Regulation Capability of Hybrid-Excited Flux-Switching Machines Hua Wei, China FF-002879: Influence of Design Parameters on Field Regulation Ability of a Hybrid Excitation Synchronous Machine with Magnetic Shunt Rotor 29

Zhuoran Zhang, Chao Dai, Yangguang Yan, China FF-008028: Axial Segmentation and Magnets Losses of SMPM Machines using 2D FE Method Tofan Fadriansyah, Tennet, Tim Strous, Huisman, Henk Polinder, Netherlands FF-008362: Multimodal interpolation of 3D finite element results for TPMLS actuator inductance modeling Ines Ben Salem, Lilia El Amraoui Ouni, Frederic Gillon, Tunisia/France FF-001457: Dynamic Characteristics Analysis of Circuit Breaker with Oil Dashpot Employing Improved Multi-Mesh Modification Method Satoshi Suzuki, Yoshihiro Kawase, Tadashi Yamaguchi, Shuhei Toyama, Wataru Koyanagi, Katsuhiro Hirata, Tomohiro Ota, Japan FF-002291: Sensitivity analysis for phase inductances in Flux-Switching PM machines Esin Ilhan, Emilia Motoasca, Johan Paulides, Elena Lomonova, Maarten Kremers, Netherlands

Oral sessions TPC5-1 - Monitoring and diagnosis Room: Callelongue – Hour: 14:00-16:00 Co-chairs: Fiorenzo Filippetti, Raphael Romary FF-004243: A novel approach to detect short circuits in low voltage induction motor by stray flux measurement Lucia Frosini, Alessandro Borin, Luca Girometta, Giuseppe Venchi, Italy FF-006114: Study of Synchronous Generator Static Eccentricities - FEM Results and Measurements Bruno A. T. Iamamura, Yvonnick Le Menach, Abdelmounaïm Tounzi, Nelson Sadowski, Eilin Guillot, Thierry Jacq, Jérémy Langlet, France FF-006831: High Performance Single and Multiple Faults Diagnosis in Voltage Source Inverter fed Induction Motor drives Mohamed Trabelsi, Mohamed Boussak, Abdelkader Chaari, France/Tunisia FF-008443: A Comprehensive Condition Monitoring Solution for the Transformer Peter Kung, Lutang Wang, Maria Comanici, Canada FF-009164: Detection of inter-turn short circuits in induction machines without the knowledge of the healthy state Remus Pusca, Raphael Romary, Andrian Ceban, France FF-010596: Time-Domain Estimation of Sub-harmonic Sinusoidal Disturbance in Sinusoidal Signal with Applications in Induction Motor Diagnostics Abhisek Ukil, Switzerland TPC5-2 - Measurements and testing Room: Callelongue – Hour: 17:00-19:00 30

Co-chairs: Guy Clerc, Basile Kawkabani FF-002143: High Frequency Synchronous Generator Model for Electromagnetic Signature Analysis Sheppard Salon, Keith Nelson, David Burow, Jan Stein, USA FF-002208: Measurement and Analysis of In-Plane Eddy Current in Lamination Steel Using a New Tester Kazuo Shima, Takeo Murai, Tadashi Fukami, Yoko Furukawa, Akiyoshi Komura, Japan FF-003662: Direct Electric Losses Measurement for PM Brushless Machines Eric Armando, Franco Villata, Paolo Guglielmi, Italy FF-007943: Capacitance of Bearings for Electric Motors at Variable Mechanical Loads Eike Wittek, Michael Kriese, Sven Gattermann, Hans Tischmacher, Bernd Ponick, Gerhard Poll, Germany FF-008842: Evaluation of Inductance Measurement Methods for PM Machines H. Bulent Ertan, Ilker Sahin, Turkey FF-009547: Testing of Advanced Permanent Magnet Machines for a Wide Range of Applications Ayman EL-Refaie, Rebecca Nold, Kiruba Haran, Manoj Shah, Konrad Weeber, Kum-Kang Huh, James Alexander, Charles Stephens, Steven Galioto, USA TPC1-1 - Losses, thermal and efficiency analysis Room: Morgiou – Hour: 14:00-16:00 Co-chairs: Mircea Popescu, Rafal Wrobel FF-004723: 3-D Eddy Current Analysis in Steel Laminations of Electrical Machines as a Contribution for Improved Iron Loss Modeling Paul Handgruber, Andrej Stermecki, Oszkár Bíró, Anouar Belahcen, Emad Dlala, Austria/Finland/USA FF-005002: Design and Technology Solutions for High-Efficiency High-Speed Motors Fabio Luise, Alberto Tessarolo, Stefano Pieri, Piero Raffin, Massimiliano Di Chiara, Freddie Agnolet, Maurizio Scalabrin, Italy FF-006068: Strand-level Finite Element Model of AC Copper Losses in High Speed Machines Wenliang Chen, Yujing Liu, Jahirul Islam, Dmitry Svechkarenko, Sweden FF-006734: The High-Frequency Induction Machine Parameters and Their Influence on the Common Mode Stator Ground Current Oliver Magdun, Andreas Binder, Germany FF-007374: Numerical analysis of heat transfer and flow of stator duct models Maximilian Schrittwieser, Andreas Marn, Ernst Farnleitner, Gebhard Kastner, Austria FF-008893: Electromagnetic Loss Computation in Large Hydroelectrical Generator Using Different Existing Models 31

Arezki Merkhouf, Claude Hudon, Eilin Guillot, Ana Aguiar, Kamal Al-Haddad, Canada/France TPC3-1 - Electrical drives 1 Room: Morgiou – Hour: 17:00-19:00 Co-chairs: Seddik Bacha, Radu Bojoi FF-000841: Enhanced Decoupling PWM Methods for Five-phase Open-end Winding Drives Nandor Bodo, Emil Levi, Martin Jones, United Kingdom FF-004073: Electric Drive Dimensioning for a Hybrid Work Machine by Using Virtual Prototyping Juho Montonen, Finland FF-004138: Position Control of Six-Phase Induction Machine using FractionalOrder Controller Franck Betin, Gérard-André Capolino, Mahmood Moghadasian, France FF-008591: A direct torque and reactive power control approach for doubly fed induction generator in wind turbine applications Qian Liu, Kay Hameyer, Germany FF-006033: Analytical Redundancy for Service Continuity of Doubly Fed Induction Machine Speed Drive Mustapha Debbou, Meriem Abdellatif, Maria Pietrzak-David, France FF-004588: Energy Optimization of Synchronous Generators by Using a Dual Control Fayçal Bensmaine, Abdallah Barakat, Slim Tnani, Gérard Champenois, Emile Mouni, France SS7 - Electrical machines for aerospace applications Room: Sormiou – Hour: 14:00-16:00 Co-chairs: Chris Gerada, Antonios Kladas FF-000752: Torque Enhanced Flux-Switching PM Machine for Aerospace Applications Christian Sanabria-Walter, Henk Polinder, Braham Ferreira, Peter Jänker, Michael Hofmann, Germany/Netherlands FF-002909: PM Synchronous Machines with Hybrid Excitation Systems and Voltage Control Capabilities: a Review Jacek Gieras, USA FF-004278: Aerospace Actuator Design: a Comparative analysis of Permanent Magnet and Induction Motor configurations Panagiotis Kakosimos, Evangelos Tsampouris, Antonios Kladas, Chris Gerada, Greece/UK FF-005878: An Optimal Sensor Placement Strategy for Force and Torque Analytical Models of a Reaction Sphere Actuator for Satellite Attitude Control 32

Leopoldo Rossini, Emmanuel Onillon, Olivier Chételat, Yves Perriard, Switzerland FF-007064: A Computationally Efficient Design Procedure for Actuator Motors using Magnetic Reluctance- and Thermal Resistance Network Models Michael Rottach, Chris Gerada, Tahar Hamiti, Pat Wheeler, United Kingdom FF-010065: Electromechanical Actuator for Helicopter Rotor Damper Application Marco Villani, Marco Tursini, Giuseppe Fabri, Luca Castellini, Italy TPC7-1 - Grid-connected and renewable energy applications 1 Room: Sormiou – Hour: 17:00-19:00 Co-chairs: Antonios Kladas, Mircea Radulescu FF-001643: Impact of High-Penetration Photovoltaic on Synchronous Generator Stability Masaki Yagami, Junji Tamura, Japan FF-006238: Direct Power Control of Variable-speed Micro-Hydropower Plant Based on propeller turbine Lakhdar Belhadji, Seddik Bacha, France FF-001414: Voltage Stability Control of Wind Farm using PMSG based Variable Speed Wind Turbine Marwan Rosyadi, Muyeen S. M., Rion Takahashi, Junji Tamura, Japan/UAE FF-008753: Development of a System for Testing Grid-Connected Permanent Magnet Wind Generators Jacques de la Bat, Mohamed Khan, Paul Barendse, South Africa FF-008788: Control of a micro grid supplied by renewable energy sources and storage batteries Emmanouil Bakirtzis, Charis Demoulias, Greece FF-008435: A methodology for optimization and cost analysis of hybrid PV/wind/battery/diesel energy system Lu Zhang, Georges Barakat, Adnan Yassine, France TPC4-1 - Manufacturing and technological problems Room: Riou – Hour: 14:00-16:00 Co-chairs: Anouar Belahcen, Sandy Smith FF-001694: Comparison of the drying times for kraft paper and pressboard in transformer factory drying Rafael Villarroel, Diego F. García, Belén García, Juan C. Burgos, Spain FF-001996: Influence of the Welding Process on the Magnetic Properties of a Slot-less Permanent Magnet Synchronous Machine Stator Core Andreas Krings, Shafigh Nategh, Oskar Wallmark, Juliette Soulard, Sweden FF-002836: Impact of the assembly constraints on a multi-air gap linear motor Philippe Enrici, Florian Dumas, Daniel Matt, France 33

FF-003603: Effect of Rotor Pole-Shoe Construction on Losses of Inverter-Fed Synchronous Motors Paavo Rasilo, Anouar Belahcen, Antero Arkkio, Finland FF-004154: Effects of Manufacturing Dissymmetry in Axial Flux PM Machines Antonino Di Gerlando, Giovanni Maria Foglia, Matteo Felice Iacchetti, Roberto Perini, Italy FF-009229: Evaluation of stator and rotor lamination materials for thermal management of a PMaSRM Shafigh Nategh, Andreas Krings, Zhe Huang, Oskar Wallmark, Mats Leksell, Magnus Lindenmo, Sweden TPC6-1 - Embedded applications 1 Room: Riou – Hour: 17:00-19:00 Co-chairs: Cristofaro Pompermaier, Thomas Wolbank FF-001368: Hybrid Electric Vehicles dynamic power allocation method - Using Ultracapacitors and Lithium Battery Mamadou Bailo Camara, Brayima Dakyo, France FF-003204: Effect of Driving Electric Machine Type on the System Efficiency of an Industrial Forklift Tatiana Minav, Lasse Laurila, Juha Pyrhönen, Finland FF-003409: A Direct Drive Multi-Speed Induction Motor for Electric Traction Applications Bogdan Virlan, Seifeddine Ben Elghali, Adrian Munteanu, Alecsandru Simion, Rachid Outbib, France FF-004618: An innovative current-limiting device for automotive micro-hybrid starter motors Nicolas Labbe, France FF-007927: Frequency Domain Non-Linear Identification Method for High Voltage Pulse Transformers Davide Aguglia, Philippe Viarouge, Carlos Martins, Switzerland/Canada FF-007854: Design of an Integrated Electromagnetic Actuator for High Frequency Damping Forces Jakub Emmrich, Wladimir Bickel, Berend Denkena, Bernd Ponick, Germany SS10 - Hybrid excitation synchronous machines Room: En Vau – Hour: 14:00-16:00 Co-chairs: Sami Hlioui, Lionel Vido FF-001465: Feasibility of different excitation methods of synchronous generators in island operation Katteden Kamiev, Janne Nerg, Juha Pyrhönen, Valeriy Zaboin, Juan Tapia, Finland/Russian Federation/Chile FF-005045: Comparison of Flux Weakening Capability in Alternative Switched Flux Permanent Magnet Machines by Mechanical Adjusters 34

Zi-Qiang Zhu, Mahir Al-Ani, Xu Liu, Masahiko Hasegawa, Adam Pride, Rajesh Deodhar, United Kingdom FF-005916: Analysis of Electromagnetic Torque in Sinusoidal Excited Switched Reluctance Machines Having DC Bias in Excitation Xu Liu, Ziqiang Zhu, Zaiping Pan, United Kingdom/China FF-008079: Study of a New Hybrid Excitation Synchronous Machine Boumedyen Nedjar, Sami Hlioui, Michel Lécrivain, Yacine Amara, Lionel Vido, Mohamed Gabsi, France FF-009075: Influence of the Ratio of Hybridization on the Performances of Synchronous Generator with Hybrid Excitation Aymen Ammar, Alexandru C. Berbecea, Frédéric Gillon, Pascal Brochet, France FF-011762: Design and Experimental Evaluation of a Compact Hybrid Excitation Claw-Pole Rotor Dan Hagstedt, Avo Reinap, Jonas Ottosson, Mats Alaküla, Sweden SS12 - Education in electro-mobility Room: En Vau – Hour: 17:00-19:00 Co-chairs: Luca Ferraris, Alberto Tenconi FF-007366: Practical experiment for students - winding an induction machine Cornelia Stuebig, Bernd Ponick, Germany FF-005266: An Educational Tool for Monitoring Electrical Power Components in Induction Machines Merit Cisneros Gonzalez, Marco Antonio Arjona Lopez, Mexico FF-004049: Teaching Linear Motors and Magnetic Levitation at Graduate Level Jacek Gieras, Poland FF-004626: Experiences from a Distance Course in Electric Drives including on-line Labs and Tutorials Sonja Tidblad Ali Rabiei, Tarik Abdulahovic, Stefan Lundberg, Torbjörn Thiringer, Mikael Alatalo, Emma Arfa Grunditz, Christian Du-Bar, Sweden FF-04111: Electric Vehicles - Educational Aspects Uwe Schaefer, Germany FF-004715: Student Learning Projects in Electric Vehicle Engineering Ewen Ritchie, Krisztina Leban, Denmark

IEEE-IES Technical Committee on Electrical Machines Meeting Room: Callelongue – Hour: 19:00-20:00 Chair: David Dorrell

35

Tuesday 4th of September Poster session 3 Room: Poster & Exhibition (first floor) - Hour: 8:00-19:00 Co-chairs: Vincent Debusschere, Antonino Di Gerlando, Pragasen Pillay FF-000825: Development and Algorithmic Implementation of a New Concept for the Preliminary Draft of Electrical Machines Quirin Hecker, Wolfgang Meyer, Philipp Bahr, Hans-Georg Herzog, Germany FF-001252: Study of Double Cage Induction Motors with Different Rotor Bar Materials Konstantinos N. Gyftakis, Dimitrios Athanasopoulos, Joya Kappatou, Greece FF-001279: The Influence of Semi-magnetic Wedges on the Electromagnetic Variables and the Harmonic Content in Induction Motors Konstantinos N. Gyftakis, Panagiotis A. Panagiotou, Joya Kappatou, Greece FF-004324: Optimization of startup characteristics of medium power asynchronous motors with short circuit rotor Aurel Campeanu, Ion Vlad, Sorin Enache, Ladislau Augustinov, Gheorghe Liuba, Ioan Cautil, Romania FF-007528: Approach for a Demand Compliant Choice of Induction Machines Used in Roller Conveyors Alexander Conradi, Dominique Melot de Beauregard, Burkhard Benthaus, Leslaw Golebiowski, Poland FF-011002: Interval arithmetic tool for optimal design of induction machines Dmitry Samarkanov, Frédéric Gillon, Pascal Brochet, Daniel Laloy, France FF-002194: Analytical Design Algorithm and FEM Analysis of the dual-rotor Permanent Magnet Induction Machine Ana Maria Gazdac, Augustin Mpanda Mabwe, Claudia Martis, Franck Betin, Karoly Biro, Romania/France FF-001872: Study on Permanent Magnet Generator for Diesel Electric Propulsion System Masahiro Hori, Mamoru Kimura, Akiyoshi Komura, Seikichi Masuda, Daisuke Koori, Takayuki Koizumi, Japan FF-001945: Models for sizing and optimization of PMG: designing a set of two machines Renato Carlson, Frederic Wurtz, Helio Voltolini, Brazil/France FF-002712: Optimal Design Approach Developed for Permanent Magnet Motors Imen Amdouni, Lilia El Amraoui, Mohamed Benrejeb, Pascal Brochet, Frederic Gillon, Tunisia/France FF-000388: Analytical Optimization and Comparison of Torque Densities between Permanent Magnet and Electrically Excited Machines Wenqiang Chu, Ziqiang Zhu, Jintao Chen, China 36

FF-000264: Steady-State and Transient Analysis of an Axial-Field Magnetic Coupling Thierry Lubin, Smail Mezani, Abderrezak Rezzoug, France FF-007897: Optimization and Comparison of Electrical Machines using Particle Swarm Optimization M. van der Geest, H. Polinder, J.A. Ferreira, D. Zeilstra, Netherlands FF-005983: Torque Ripple Reduction in Fractional-Slot Interior PM Machines Optimizing the Flux-Barrier Geometries Massimo Barcaro, Nicola Bianchi, Italy FF-001201: Reducing the permanent magnet content in fractional-slot concentrated-windings permanent magnet synchronous machines Peter Sergeant, Alex Van den Bossche, Belgium FF-007048: Criteria for Optimal Design of Interior Permanent Magnet Motor Series Damir Arko, Stjepan Stipetić, Croatia FF-002364: Design Process of Traction Motor having Tooth Coil Windings Juho Montonen, Pia Lindh, Juha Pyrhönen, Finland FF-001678: A Design of Axial-gap Switched Reluctance Motor for In-wheel Direct-Drive EV Tohru Shibamoto, Kenji Hiroki Goto, Kenji Nakamura, Osamu Ichinokura, Japan FF-002801: Ferrite Assisted Synchronous Reluctance Machines: a General Approach Alfredo Vagati, Barbara Boazzo, Paolo Guglielmi, Gianmario Pellegrino, Italy FF-004952: Design Study and Experimental Analysis of Wound Field Flux Switching Motor for HEV Applications Erwan Sulaiman, Takashi Kosaka, Nobuyuki Matsui, Japan FF-001864: A Study of Permanent Magnet Rotor for Large Scale Wind Turbine Generator System Mamoru Kimura, Daisuke Kori, Akiyoshi Komura, Hiroyuki Mikami, Kazumasa Ide, Tetsuo Fujigaki, Motonobu Iizuka, Masashi Fukaya, Japan FF-001198: Size Spectrum Investigation of Mini Turbogenerators for Gas Turbine Units Viktor Antipov, Irina Kruchinina, Andrey Grozov, Anna Ivanova, Russian Federation FF-002798: Theoretical Analysis of the Reversed Claw Poles Alternator Performances Felicia Surdu, Ágoston Károly Biró, Claudia Steluţa Marţiş, Raluca Trifa, Romania FF-010618: 5MW Direct Drive Wind Turbine Generator Design Arsalan Hussain Zaidi, Lucille Senn, Iratxe Ortega, Przemyslaw Radecki, Ireneusz Szczesny, Mustafa Erkec, Ewen Ritchie, Krisztina Leban, Denmark

37

FF-002402: Defining Proper Initial Geometry of an 8 MW Liquid-Cooled DirectDrive Permanent Magnet Synchronous Generator for Wind Turbine Applications Based on Minimizing Mass Yulia Alexandrova, Finland FF-010804: The Concept of Imaginary Machines for Design and Setting of Optimization Problems: Application to a Synchronous Generator Frederic Wurtz, Patrick Kuo Peng, Elissa De Carvalho, France/Brazil FF-001848: Magnetic Stress and Support Plate Deflection of Halbach Array Magnets Tetsuzo Sakamoto, Japan FF-002631: A Design Example of An 8-pole Radial AMB for Flywheel Energy Storage Mohamed I. Daoud, Ayman S. Abdel-Khalik, Ahmed M. Massoud, Shehab Ahmed, Nabil H. Abbasy, Qatar/Egypt FF-003514: Analytical Analysis of a Radial Flux Air-Cored Permanent Magnet Machine with a Double-Sided Rotor and Non-overlapping Double-layer Windings Peter J. Randewijk, Maarten J. Kamper, South Africa FF-010812: Planetary Gearbox Effects on Induction Machine in Wind Turbine: Modeling and Analysis Zahra Daneshi-Far, Humberto Henao, Gérard-André Capolino, France FF-007226: Metrological Characterization of an Ironless Position Sensor Prototype Alessandro Danisi, Roberto Losito, Alessandro Masi, Yves Perriard, Switzerland FF-005576: A Brush Model for detailed Commutation Analysis of Universal Motors Matthias Willig, Timothy Miller, Isidro Corral, United Kingdom/Germany FF-006726: Simulation of electrical machines end effects with reduced length 3D FEM models Bogdan Funieru, Andreas Binder, Germany FF-004332: Simulation of Asynchronous Operation in High Power Salient Pole Synchronous Machines Aurel Campeanu, Sorin Enache, Ion Vlad, Gheorghe Liuba, Ladislau Augustinov, Ioan Cautil, Romania FF-006319: Commutator wear due to drawn arcs France Pavlovcic, Slovenia FF-003891: Experimental Identification and Reduction of Acoustic Noise in Small Brushed DC Motors Aldo Boglietti, Andrea Cavagnino, Seyedamin Saied, Silvio Vaschetto, Italy/Iran FF-000108: Interturn Short-circuit Analysis in an Induction Machine by Finite Elements Method and Field Tests Martha Amaya Enciso, Dario Diaz Sanchez, Alejandro Paz Parra, Colombia 38

FF-000604: Comparison of different methods to determine defects in the stator core Christian Kreischer, Leslaw Golebiowski, Poland FF-000612: Fault Detection and Diagnosis of Induction Motors Based on Hidden Markov Model Abdenour Soualhi, Guy Clerc, Hubert Razik, Abdesselam Lebaroud, France/Algeria FF-001155: Diagnosis of Broken Rotor Bar Faults by Using Frequency Spectrum of Stator Current Envelope Hayri Arabaci, Osman Bilgin, Turkey FF-001236: The Influence of the Broken Bar Fault on the Magnetic Field and Electromagnetic Torque in 3-phase Induction Motors Dionysios V. Spyropoulos, Konstantinos N. Gyftakis, Joya Kappatou, Epaminondas D. Mitronikas, Greece FF-001341: Influence of the Magnetic Steel Encasing of Induction Motors on the Efficiency of the Rotor Faults Diagnosis based on the Harmonics of the Coil Sensors Output Voltage Virgiliu Fireteanu, Petrica Taras, Romania FF-001538: Ageing Due to Thermal Cycling by Power Regulation Cycles in Lifetime Estimation of Hydroelectric Generator Stator Windings Voitto Kokko, Finland FF-002135: Rotor Fault Diagnosis in a Squirrel-Rotor Cage Induction Machine Using Support Vector Machines Samir Hamdani, Hamza Mezerreg, Bilal Boutikar, Lahcène Noureddine, Omar Touhami, Rachid Ibtiouen, Algeria FF-002755: Induction Motor Stator Fault Diagnosis Technique Using Park Vector Approach and Complex Wavelets Dionysios V. Spyropoulos, Epaminondas D. Mitronikas, Greece FF-003581: Design of Large Synchronous Turbo-Generator Monitoring System Marinko Kovacic, Zlatko Hanic, Mario Vrazic, Croatia FF-005428: Telemetry diagnostic capabilities for asynchronous motors Adam Decner, Poland FF-005614: Virtual Instrumentation Use in Static Excitation Systems Marius Biriescu, Gheorghe Liuba, Ladislau Augustinov, Gheorghe Madescu, Valentin Nedelea, Martian Mot, Romania FF-005967: New techniques to simulate and diagnose stator winding faults in low voltage induction motors Lucia Frosini, Alessandro Borin, Andrea Albini, Francesco Benzi, Italy FF-006211: Artificial Neural Networks Based Fault Detection in 3-Phase PMSM Traction Motor Saeid Moosavi, France FF-006327: Three-Level NPC Inverter Fault Diagnosis by the Average Current Park’s Vector Approach Mohsen Abadi, André Mendes, Sérgio Cruz, Portugal 39

FF-006475: Current Residue Based Load Independent Eccentricity Detection in Salient Pole Synchronous Machines Thirumarai Ilamparithi, Subhasis Nandi, Canada FF-006483: An Improved Algorithm for Detection of Rotor Faults in Squirrel Cage Induction Motors Based on a New Fault Indicator Mohamed Sahraoui, Salah Eddine Zouzou, Adel Ghoggal, Salim Guedidi, Hamid Derghal, Algeria FF-007501: Braking torque analysis of PMSM Motor under Stator Winding Failures Syed Hossain, Evandro Oliveira, USA/Portugal FF-007935: Accurate stator fault detection Insensitive to the unbalanced voltage in induction motor Monia Bouzid, Gérard Champenois, Tunisia/France FF-008109: A Geometrical Simple Approach for Power Silicon Devices Fault Detection and Fault-Tolerant Operation of a Voltage Source Inverter Antonino O. Di Tommaso, Fabio Genduso, Rosario Miceli, Italy FF-008524: Impedance Angle Changes Analysis Applied to Short Circuit Fault Detection Saeid Moosavi, France FF-008745: Modelling and Detection of Bearing Faults in Permanent Magnet Synchronous Motors Ali Rezig, Abdoul-Ousman N’Diaye, Abdesslem Djerdir, Mohamed Rachid Mekideche, Algeria/France FF-011894: An Efficient Architecture of Multi-Stage Neural Network for WoundRotor Induction Generator Short-Circuit Fault Classification Samuel Toma, Laurent Capocchi, Gérard-André Capolino, France FF-010367: Fault Detection in Copper-Rotor SEIG System Using Artificial Neural Network for Distributed Wind Power Generation Lakshmi Varaha Iyer, Xiaomin Lu, Kaushik Mukherjee, Narayan Kar, Canada FF-011819: Bearing Fault Diagnosis Based on Autoregressive Modeling and SVM Tawfik Thlaidjia, Salah Chenikher, Algeria FF-009369: Diagnosis of faults in induction generators under fluctuating load conditions through the instantaneous frequency of the fault components Francisco Vedreño-Santos, Martin Riera-Guasp, Humberto Henao, Manuel Pineda-Sanchez, Spain/France FF-007161: Investigations on bearing currents in converter-fed electrical motors Hans Tischmacher, Sven Gattermann, Germany FF-000361: Behavior of a single phase grid transformer during out-of-phase synchronizations Zhijun Ye, Christian Kreischer, Stefan Kulig, Germany FF-000698: Predict the rupture of transformer tanks with static FEM analysis Alexander Hackl, Peter Hamberger, Austria 40

FF-001082: A Novel Technique for Differential Protection of Power Transformers Adel Aktaibi, Azizur Mohamed Rahman, Canada FF-003638: China Actions in Higher Efficient Transformers Promotion Lingyu Zhang, Kai Zhao, China FF-003646: Optimized Methods to Evaluate Efficient Distribution Transformers Lingyu Zhang, Kai Zhao, Desheng Xu, China FF-003727: Modeling Continuous Windings under Transients with TLM and ATP Sérgio Cabral, Anderson Nunes, Marconi Januário, Geferson Farina, Brazil FF-006041: Global transformer design optimization using deterministic and non-deterministic algorithms Eleftherios Amoiralis, Marina Tsili, Antonios Kladas, Greece FF-007757: FEM Modeling of Skin and Proximity Effects for Coreless Transformers Pascal Meyer, Yves Perriard, Switzerland FF-008737: Novel procedure for low frequency FRA traces interpretation Wilder Herrera, Guillermo Aponte, Carlos Gonzalez-Garcia, Jorge Pleite, Colombia/Spain FF-010332: 3D Calculation and Modeling of Eddy Current Losses in a Large Power Transformer Alexandre Milagre, Mauricio Ferreira da Luz, Glauco Cangane, Alexandre Komar, Paulo Avelino, Brazil FF-006548: Terminal Measurements Based Modeling of Single Phase Transformer for Condition Monitoring Shnatanav Bhowmick, Subhasis Nandi, Canada FF-000418: Optimum Design of Electromagnetic Solenoid by Using Artificial Bee Colony (ABC) Algorithm Wataru Kitagawa, Takaharu Takeshita, Japan FF-002259: Integration of an Inductive Position Sensor and a Contactless Energy Transfer System J.P.C. Smeets, T.T. Overboom, J.W. Jansen, E.A. Lomonova, Netherlands FF-008303: Surface Partial Discharges Aging on Thin Polymeric Nanocomposite Films Francesco Guastavino, Alessandro Ratto, Laura Della Giovanna, Jose Manuel Gomez-Elvira, Nuria Garcia, Italy/Spain FF-008389: Diagnosis of Common Defects Inside Cast Resin Current Transformers by Digital Partial Discharges Acquisition Francesco Guastavino, Eugenia Torello, Alessandro Ratto, Andrea Dardano, Massimo Secci, Federico Ferraro, Diego Pistone, Italy FF-000078: Core Losses Measurement Technique for High Frequency and Flux Density of Switched Reluctance Machines Minh Dinh Bui, Uwe Schaefer, Germany FF-000256: Progress on formulas for core loss calculations 41

Jemimah Akiror, Canada FF-000175: Temperature dependency of the efficiency of Line Start Permanent Magnet Machines Colin Debruyne, Stijn Derammelaere, Jan Desmet, Lieven Vandevelde, Belgium FF-001597: Basic Examination of Eddy Current loss Estimation in SPM Motor Based on Electric and Magnetic Networks Yukihiro Yoshida, Kenji Nakamura, Osamu Ichinokura, Japan FF-001724: Influence of electrical steel grade on the temperature distribution in direct-drive PM synchronous generators for 5 MW wind turbines Damian Kowal, Peter Sergeant, Luc Dupre, Lode Vandenbossche, Belgium FF-001961: A Methodology for Quality Analysis on Stator Cores Aleandro Espindola, Jean Schlegel, Afranio Junior, Nelson Batistela, Nelson Sadowski, João Bastos, Patrick Kuo-Peng, Flavio Kalluf, Brazil FF-009024: Equivalent core-loss resistance identification for interior permanent-magnet synchronous machines Ionut Andrei Lar, Mircea Radulescu, Romania FF-000485: Prediction of Eddy Current Losses of Surface Mounted Permanent Magnet Servo Motor Ramia Deeb, Marcel Janda, Zbynek Makki, Czech Republic FF-001066: Precise Calculation and Optimization of Rotor Eddy Current Losses in High Speed Permanent Magnet Machine Mohammad Etemadrezaei, Johan Wolmarans, Henk Polinder, Bram Ferreira, Netherlands FF-004847: On the Validity of the Harmonic Superposition Principle for Computing Rotor Eddy Current Losses in Permanent Magnet Machines Alberto Tessarolo, Mario Mezzarobba, Mauro Bortolozzi, Italy FF-010391: Use of Time-Harmonic FE Analysis to Compute Rotor EddyCurrent Losses in Synchronous Machines Subject to Distorted Stator Currents Fabio Luise, Alberto Tessarolo, Freddie Agnolet, Mario Mezzarobba, Italy FF-008001: Improvement and Validation of an Iron Loss Model for Synchronous Machine Anthony Frias, Afef Kedous-Lebouc, Christian Chillet, Laurent Albert, Lionel Calegari, France FF-005843: Negative Sequence Losses in Turbine Generator Rotors Christopher P. Riley, United Kingdom FF-000663: Thermal Modelling of a Claw-Pole Car Alternator - Steady-State Computation and Identification of free Convection coefficients Olivier Maloberti, Anthony Gimeno, Alejandro Ospina, Guy Friedrich, Loic Charbonnier, Khadija El-Kadri Benkara, France FF-002577: Thermal Modeling of Directly-Oil-Cooled Permanent Magnet Synchronous Machine Pavel Ponomarev, Maria Polikarpova, Juha Pyrhönen, Finland 42

FF-003115: Robust Thermal Model for the Estimation of Rotor Cage and Stator Winding Temperatures of Induction Machines Christian Kral, Anton Haumer, Sang Bin Lee, Austria/Korea FF-004901: Thermal Analysis of Duplex 3-Phase Induction Motor Under Fault Operating Conditions Mircea Popescu, David Dorrell, Luigi Alberti, Nicola Bianchi, David Staton, Douglas Hawkins, United Kingdom/Australia/Italy FF-003166: Coupled fluid-thermal network modeling approach for electrical machines Matthias Centner, Ilja Sabelfeld, Germany FF-005258: Characterization and Application of Forced Cooling Channels for Traction Motors in HEVs Zhe Huang, Francisco Marquez, Mats Alakua, Jinliang Yuan, Sweden FF-006823: Compensation of Speed Dependency in Sensorless Rotor Temperature Estimation for Permanent Magnet Synchronous Motor Martin Ganchev, Christian Kral, Thomas Wolbank, Austria

Oral sessions TPC4-2 - Thermal problems Room: Morgiou - Hour: 8:00-10:00 Co-chairs: Andrea Cavagnino, Christian Kral FF-001228: Thermal Design and Analysis of a Direct-Water Cooled Direct Drive Permanent Magnet Synchronous Generator for High-Power Wind Turbine Application Maria Polikarpova, Pekka Royta, Julia Alexandrova, Scott Semken, Janne Nerg, Juha Pyrhonen, Finland FF-006882: Estimation of Equivalent Thermal Parameters of Electrical Windings Nick Simpson, Phil. H Mellor, Rafal Wrobel, United Kingdom FF-007005: Characterizing the convective wall heat transfer on convoluted shapes in the end-region of an induction machine Martin Hettegger, Alice Reinbacher-Köstinger, Oszkár Bíró, Austria FF-004855: Calorimetric Measurement of Stator Core Losses Deepak Singh, Antero Arkkio, Finland FF-007714: Scaling of AC Copper Loss in Thermal Modeling of Electrical Machines Rafal Wrobel, Antonio Griffo, Phil Mellor, United Kingdom FF-009997: Thermal Analysis of an Axial Flux Permanent Magnet Machine Ângela Ferreira, Artur Costa, Portugal TPC1-2 - Fractional slot machines Room: Morgiou - Hour: 10:30-12:30 43

Co-chairs: Jean-Frederic Carpentier, Zi-Qiang Zhu FF-000647: Simple and Accurate Analytical Estimation of Slotting Effect on Magnet Loss in Fractional-Slot Surface-Mounted PM Machines Z. X. Fang, United Kingdom FF-000779: Effect of Segmentation on Eddy-Current Loss in PermanentMagnets of Axial-Flux PM Machines using a Multilayer-2D - 2D Coupled Model Hendrik Vansompel, Peter Sergeant, Luc Dupré, Belgium FF-001406: Study of Special Winding for Reduction of Space Flux Harmonics Caused by Fractional-Slot Kazuma Tsujikawa, Tadashi Tokumasu, Mikio Kakiuchi, Daisuke Hiramatsu, Takashi Ueda, Masafumi Fujita, Masayuki Ichimonji, Kazunori Ikeda, Toru Otaka, Japan FF-001619: A Novel 12-Teeth/10-Poles PM Machine with Flux Barriers in Stator Yoke Gurakuq Dajaku, Dieter Gerling, Germany FF-006572: Modelling of Surface PM Machine Using Soft Magnetic Composites and a Bonded Magnet Ring Chun Tang, Wen L. Soong, Gene S. Liew, Nesimi Ertugrul, Australia FF-011673: Fractional-Slot Concentrated-Winding Axial-Flux PermanentMagnet Machine with Tooth-Wound Coils Fabio Giulii Capponi, Giulio De Donato, Antonio Rivellini, Federico Caricchi, Italy TPC4-3 - Magnetic materials Room: Morgiou - Hour: 14:00-16:00 Co-chairs: Andy Knight, Peter Osmand Rasmussen FF-000426: Rotational Core Loss Measurements in Clockwise and Counterclockwise Directions Natheer Alatawneh, Pragasen Pillay, Canada FF-000434: Estimation of Magnetic Properties and Damaged Area Width Due to Punching Process: Modeling and Experimental Research Zbigniew Gmyrek, Andrea Cavagnino, Luca Ferraris, Italy FF-002844: An Examination of Magnetic Property Variation of SpecificationAcceptable Electrical Steel Steve Sprague, USA FF-008141: Interior PM Machines using Ferrite to Substitute Rare-Earth Surface PM Machines Massimo Barcaro, Nicola Bianchi, Italy FF-006793: Rotor Design for PM Generators Reflecting the Unstable Neodymium Price Sandra Eriksson, Hans Bernhoff, Sweden FF-010014: Design of a Permanent Magnet Synchronous Motor with Grain Oriented Electrical Steel for Direct-Drive Elevators 44

Stefano Cicalè, Luciano Albini, Francesco Parasiliti, Marco Villani, Italy TPC1-3 - IPM Machines Room: Morgiou - Hour: 17:00-19:00 Co-chairs: Jacek Gieras, Noureddine Takorabet FF-004707: Design of Direct-Driven Permanent Magnet Synchronous Motors for an Electric Sports Car Janne Nerg, Finland FF-005541: Design Characteristics of PMa-SynRM and Performance Comparison with IPMSM Based on Numerical Analysis Yun-Ho Jeong, Kwangdeok Kim, Yong-Jae Kim, Byung-Sup Park, Sang-Yong Jung, Korea FF-006904: Performances Characteristics of Interior Permanent-Magnet Synchronous Machines with Distributed Windings: Railway Application Abdessamed Soualmi, Frédéric Dubat, Andry Randria, Christophe Espanet, France FF-008613: Influence of Steel BH Characteristics on IPMSM Performance Shah Rahman, Babak Vaseghi, Andrew Knight, Canada FF-009393: Multi-Objective Optimization of an Interior PM Motor for a HighPerformance Drive Nicola Bianchi, Dario Durello, Emanuele Fornasiero, Italy FF-011134: Optimal Rotor Shape with Third Harmonic for Maximizing Torque and Minimizing Torque Ripple in IPM Motors K Wang, Z.Q Zhu, G Ombach, W. Chlebosz, United Kingdom/Germany TPC3-2 - Electrical drives 2 Room: Sormiou - Hour: 8:00-10:00 Co-chairs: Hamid Ben Hamed, Andreas Binder FF-000167: Sensorless Vector Control for Hermetic Refrigeration Compressor Rodrigo Z. Azzolin, Rodrigo P. Vieira, Cristiane C. Gastaldini, Hilton A. Gründling, Brazil FF-007358: Inclusion of Magnetic Saturation in Dynamic Models of Synchronous Reluctance Motors Zengcai Qu, Toni Tuovinen, Marko Hinkkanen, Finland FF-011797: Comparative performance analysis of field-oriented control and direct torque control for a fractional-slot concentrated winding interior permanent magnet synchronous machine Dai Nguyen, Rukmi Dutta, Fazlur M Rahman, Australia FF-010413: Towards the automatic tuning of MTPA algorithms for IPM motor drives Riccardo Antonello, Matteo Carraro, Mauro Zigliotto, Italy FF-010588: Position Control of Six-Phase Induction Motor using Fuzzy Logic : Application to Electric Power Steering 45

Franck Betin, Gérard-André Capolino, Arnaud Sivert, France FF-011959: Maximum Torque-per-Ampere Control of Permanent Magnet Synchronous Machines Wei Wang, Babak Fahimi, Morgan Kiani, USA SS8-1 - Design of electrical machines for the automotive sector 1 Room: Sormiou - Hour: 10:30-12:30 Co-chairs: Malcolm McCulloch, Avoki Omekanda FF-003387: Sensorless-Oriented Design of Concentrated-Winding IPM Motors for HEV Drive Application Yoshiaki Kano, Takashi Kosaka, Nobuyuki Matsui, Masami Fujitsuna, Japan FF-008656: Design and Evaluation of Electrical Machine for Parallel Hybrid Drive for Heavy Vehicles Rasmus Andersson, Avo Reinap, Mats Alaküla, Sweden FF-003778: A Computationally Efficient Design Technique for Electric Vehicle Traction Machines Panagiotis Lazari, Jiabin Wang, Liang Chen, United Kingdom FF-008397: A Novel Interior Permanent Magnet Motor Design with a SelfActivated Flux-Weakening Device for Automotive Applications Alberto Tessarolo, Mario Mezzarobba, Roberto Menis, Italy FF-006769: New Hybrid Reluctance Motor Drive Pere Andrada, Balduí Blanqué, Eusebi Martínez, Marcel Torrent, Spain FF-009903: Design and Evaluation of Moulded Powder-Core Machine for InWheel Drive Application Avo Reinap, Leif Svensson, Mats Alaküla, Mats Andersson, Sweden SS8-2 - Design of electrical machines for the automotive sector 2 Room: Sormiou - Hour: 14:00-16:00 Co-chairs: Ayman El-Refaie, Malcolm McCulloch FF-009415: A Review of High Power Density Switched Reluctance Machines Suitable for Automotive Applications Yuan Gao, Malcolm McCulloch, United Kingdom FF-007668: Redesign of an Electrical Rear Wheel Drive (E-RWD) for a Hybrid Vehicle in a given drive cycle Francisco J. Márquez-Fernández, Zhe Huang, Mats Alaküla, Sweden FF-007609: Design of a Transverse Flux Permanent Magnet Excited Machine as a Near-Wheel Motor for the Use in Electric Vehicles Peter Seibold, Manuel Gaertner, Frieder Schuller, Nejila Parspour, Germany FF-006084: Design optimisation of permanent magnet assisted synchronous reluctance machines for electric vehicle applications Liang Chen, Jiabin Wang, Patrick Lombard, Panagiotis Lazari, Vincent Leconte, United Kingdom/France FF-003433: Innovative Design for Flux Leakage Reductin in IPM Machines 46

Maddalena Cirani, Sture Eriksson, Jonas Thunberg, Sweden FF-010235: Liquid Cooled Permanent-Magnet Traction considering Temporary Overloading Konstantinos I. Laskaris, Antonios G. Kladas, Greece

Motor

design

TPC5-3 - Noise, vibration and high frequency effects Room: Sormiou - Hour: 17:00-19:00 Co-chairs: Chandur Sadarangani, Hans Tischmacher FF-000655: Vibration Monitoring for Wound Rotor Induction Machine Winding Fault Detection Sinisa Djurovic, Damian Vilchis-Rodriguez, Alexander Smith, United Kingdom FF-007072: Experimental Investigation of the 3D Vibrational Behaviour of an Induction Machine Bernhard Weilharter, Oszkar Biro, Hermann Lang, Georg Ofner, Siegfried Rainer, Austria FF-010839: A comparative study of acoustic, vibration and stator current capabilities for gear tooth fault diagnosis Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino, France FF-007811: High Frequency Equivalent Circuit Model of the Stator winding in Electrical Machines Sara Mahdavi, Kay Hameyer, Germany FF-007293: Influence of Bearing Currents on the Bearing Lifetime for Converter Driven Machines Michael Kriese, Eike Wittek, Hans Tischmacher, Sven Gattermann, Bernd Ponick, Gerhard Poll, Germany FF-003085: Additional Harmonic Losses of Induction Motors by PWM Inverters: Comparison between Result of Finite Element Method and IEC/TS 60034 Katsumi Yamazaki, Satoshi Kuramochi, Japan TPC7-2 - Grid-connected and renewable energy applications 2 Room: Riou - Hour: 8:00-10:00 Co-chairs: H. Bulent Ertan, David Dorrell FF-000329: Optimization of the Start-up Time of a Variable Speed PumpTurbine Unit in Pumping Mode Yves Pannatier, Basile Kawkabani, Christophe Nicolet, Alexander Schwery, Jean-Jacques Simond, Switzerland FF-007498: High Altitude Wind Power Systems: A Survey on Power Kites Mariam Ahmed, Ahmad Hably, Seddik Bacha, France FF-006343: Maximising Output Power of Self-Excited Induction Generators for Small Wind Turbines Nicholas Batt, Colin Coates, Australia FF-008907: Sizing and Topology of a small-scale Sustainable Wind Energy Capture and Storage System 47

Hartmut Jagau, Mohamed Khan, Paul Barendse, South Africa FF-011169: Real Time Marine Current Turbine Emulator: Design, Development and Control Strategies George Caraiman, Cristian Nichita, Brayima Dakyo, Viorel Minzu, Chul Hee Jo, France/Romania/Korea FF-007196: Development of Tools for DER Components in a Distribution Network Lucian Mihet-Popa, Cosmin Koch-Ciobotaru, Fridrik Isleifsson, Henrik Bindner, Denmark/Romania SS9-1 - Analytical models of electric machines and actuators 1 Room: Riou - Hour: 10:30-12:30 Co-chairs: Elena Lomonova, Georges Barakat FF-003743: FEM2D Based Analytical Model of the Air Gap Magnetic Field in Surface PM Synchronous Machines Antonino Di Gerlando, Giovanni Foglia, Matteo Iacchetti, Italy FF-002267: Accurate Analytical Computation of Magnetic Flux Density of Spherical Permanent Magnet Arrays B. van Ninhuijs, T.E. Motoasca, E.A. Lomonova, Netherlands FF-003824: Analytical Investigation of Open-Circuit Eddy Current Loss in Windings of PM Machines L.J. Wu, Z.Q. Zhu, United Kingdom FF-004669: Calculation of Radial Forces in Surface PM Motors with Asymmetric Stator Windings Nicolas Velly, Noureddine Takorabet, Babak Nahidmobarakeh, Farid MeibdyTabar, France FF-005924: On Load Analytical Modelling of the Magnetic Field in Axial Flux Surface-Inset Permanent Magnet Machines with Semi-Closed Slots Adel Bellara, Huguette Tiegna, Yacine Amara, Georges Barakat, France FF-007595: Rotor Losses for PMS Machines with Concentrated Windings Ernest Matagne, Bruno Dehez, François Baudart, Belgium SS9-2 - Analytical models of electric machines and actuators 2 Room: Riou - Hour: 14:00-16:00 Co-chairs: Yacine Amara, Johannes Paulides FF-004162: Steady-State and Transient Parameter Computation for Wound Field Synchronous Machines Dingsheng Lin, Ping Zhou, Bo He, Nancy Lambert, USA FF-006556: Exact special 2D spectral expression of the magnetic field in air gap with skewed source Ernest Matagne, Bruno Dehez, Kouider Ben-Naoum, Belgium FF-006866: Analytical Computation of Flux Concentration PM Machines: Study of the Influence of the Magnets Shape 48

Lamia Belguerras, Larbi Hadjout, Thierry Lubin, Smail Mezani, Abderrezak Rezzoug, France FF-007919: Modeling of a Finite, Rectangular, Conducting Plate in an Eddy Current Damper K.J.W. Pluk, B.L.J. Gysen, J.L.G. Janssen, E.A. Lomonova, J.W. Jansen, Netherlands FF-001732: 25 W linear PM oscillo-motor (PM-LOM): general and optimal design, with FEM validation and controlled dynamics Ion Boldea, Lucian Tutelea, Sorin-Cristian Agarlita, Cristofaro Pompermaier, Irineu Setter, Romania/Brazil FF-002771: Analytical Method for Predicting the Air-Gap Flux Density of DualRotor Permanent-Magnet (DRPM) Machine Wei Xie, Gurakuq Dajaku, Dieter Gerling, Germany TPC2-1 - Machines for special applications Room: Riou - Hour: 17:00-19:00 Co-chairs: Haran Karmaker, Juha Pyrhonen FF-000027: Stator Design Concepts for an 8 MW Direct Drive Superconducting Wind Generator Haran Karmaker, Edward Chen, William Chen, George Gao, USA FF-005118: Design, comparison of two multi-disc permanent magnet motors for aeronautical Florian Dumas, Philippe Enrici, Daniel Matt, France FF-008583: Design of an Eddy-Current Coupling for Slip-Synchronous Permanent Magnet Wind Generators Zac Mouton, Maarten Kamper, South Africa FF-010723: Stator Winding Connection Mode Management in Line-Start Permanent Magnet Motors to Improve their Efficiency and Power Factor Fernando J. T. E. Ferreira, Anibal T. De Almeida, Ge Baoming, Portugal/China FF-007773: Numerical modeling of an electromagnetic micro-motor using 3DFEM Julien Moeneclaey, Abdelmounaim Tounzi, France FF-007706: Linear Permanent Magnet Electric Generator for Free Piston Engine Applications Claudiu Oprea, Lorand Szabo, Claudia Martis, Romania TPC6-2 - Embedded applications 2 Room: En Vau - Hour: 8:00-10:00 Co-chairs: Philippe Enrici, James Kirtley FF-001058: Analytical determination of the orthotropic Material behavior of stator bars in the range of the end windings and determination of the material characteristics of the orthotropic composite space brackets via experimental modal analysis and FE- calculation 49

Bernd Schlegl, Florian Schönleitner, Andreas Marn, Fritz Neumayer, Franz Heitmeir, Austria FF-003859: Ultracapacitor Storage for a 50t Capacity Gantry Crane Augusto Di Napoli, Artan Ndokaj, Italy FF-004936: An Integrated Split-Phase Dual-Inverter Permanent Magnet Motor Drive and Battery Charger for Grid-Connected Electric or Hybrid Vehicles Saeid Haghbin, Torbjörn Thiringer, Ola Carlson, Sweden FF-003247: Performance Analysis of a Hybrid Dual Rotor Motor for Electric Vehicle Application Mohammed Nasir Ansari, Amit Kumar Singh, Praveen Kumar, India FF-010626: A Comparison between Soft Magnetic Cores for Axial Flux PM Synchronous Machines Roberto Di Stefano, Fabrizio Marignetti, Italy FF-002003: Quasistatic piezomotor using resonant structures dedicated to electroactive lubrication effect Jean-François Rouchon, Céline Cénac-Morthé, Dominique Harribey, France SS11 - Noise and vibrations in electrical machines Room: En Vau - Hour: 10:30-12:30 Co-chairs: Michel Hecquet, Vincent Lanfranchi FF-003786: Vibroacoustic simulation of an electric motor: methodology and focus on the structural FEM representativity Jean-Baptiste Dupont, Pascal Bouvet, Louis Humbert, France FF-005827: Comparative Study of Vibration and Acoustic Noise between Classical and Mutually Coupled Switched Reluctance Motors Xiaobin Liang, Guangjin Li, Javier Ojeda, Mohamed Gabsi, Zhuoxiang Ren, France FF-006173: Modeling Spatial Harmonics and Switching Frequencies in PM Synchronous Machines and their Electromagnetic Forces Matthias Boesing, Markus Niessen, Tobias Lange, Rik De Doncker, Germany FF-006963: Influence of the Inverter’s Modulation Technique on the Audible Noise of Electric Motors Ioannis Tsoumas, Hans Tischmacher, Germany FF-008966: Material parameters for the structural dynamic simulation of electrical machines Michael van der Giet, Knut Kasper, Rik W. De Doncker, Kay Hameyer, Germany FF-009296: Characterisation of radial vibration force and electromagnetic noise behaviour of a PWM-fed permanent magnet synchronous machine Nicolas Bracikowski, France SS4 - Condition monitoring for hybrid and electrical vehicles Room: En Vau - Hour: 14:00-16:00 Co-chairs: Chiara Boccaletti, Antonio Marques Cardoso 50

FF-005169: A Voltage-Based Approach for Open-Circuit Fault Diagnosis in Voltage-Fed SVM Motor Drives without Extra Hardware Nuno Freire, Jorge Estima, António Cardoso, Portugal FF-005215: Efficiency Evaluation of Fault-Tolerant Operating Strategies Applied to Three-Phase Permanent Magnet Synchronous Motor Drives Jorge Estima, A. J. Marques Cardoso, Portugal FF-009032: Development of an On-Board Unit for the Monitoring and Management of an Electric Fleet Gianluca Fabbri, Fabiana Calenne, Marco London, Chiara Boccaletti, Antonio Cardoso, Fabio Mascioli, Italy/Portugal FF-011312: Analysis of Demagnetization Faults in Surface-Mounted Permanent Magnet Synchronous with Inter-turns and Phase-to-Ground Short-Circuits Julio Urresty, Jordi Riba, Luis Romeral, Harold Saavedra, Spain FF-011363: Demagnetizations diagnosis for permanent magnet synchronous motors based on advanced wavelet analysis Yasser Gritli, Claudio Rossi, Domenico Casadei, Luca Zarri, Fiorenzo Filippetti, Italy FF-011584: Real-time Demagnetization Assessment of PM Synchronous Machine Ali Sarikhani, Osama Mohammed, USA SS2 - Energy conservation in transformers and related practices Room: En Vau - Hour: 17:00-19:00 Co-chairs: Georgios Loizos, Xose Lopez-Fernandez FF-000973: A Dual-Topology ICPT Applied to an Electric Vehicle Battery Charger Christophe Auvigne, Paolo Germano, Yves Perriard, Switzerland FF-006246: Experimental Validation of a New Methodology to Reduce Hot Spots on the Screws of Power Transformer Tanks Juan Carlos Olivares-Galván, Salvador Magdaleno-Adame, Rafael EscarelaPerez, Rodrigo Ocon-Valdez, Pavlos Georgilakis, George Loizos, Mexico/Greece FF-007994: Modeling and Dimensioning of High Voltage Pulse Transformers for Klystron Modulators Philippe Viarouge, Davide Aguglia, Carlos Martins, Jérôme Cros, Canada/Switzerland FF-009199: Design Optimization of High Frequency Transformer for Dual Active Bridge DC-DC Converter Khoa Dang Hoang, Jiabin Wang, United Kingdom FF-011827: Transformer Tertiary Stabilizing Windings. Part I: Apparent Power Rating Patricia Penabad-Duran, Xose M. Lopez-Fernandez, Casimiro Alvarez-Mariño, Spain 51

FF-011843: Transformer Tertiary Stabilizing Windings. Part II: Overheating Hazard on Tank Walls Patricia Penabad-Duran, Casimiro Alvarez-Mariño, Xose M. Lopez-Fernandez, Spain TPC2-2 - Magnetic gears and linear machines Room: Sugiton - Hour: 8:00-10:00 Co-chairs: Sheppard Salon, Mounaim Tounzi FF-000744: Contactless power supply for magnetically levitated elevator systems Rüdiger Appunn, Björn Riemer, Kay Hameyer, Germany FF-000957: Torque Ripple Analysis of a Magnetic-Geared Motor Noboru Niguchi, Katsuhiro Hirata, Japan FF-006602: Independently Controllable Electromagnetic Spherical Actuator Shuhei Maeda, Katsuhiro Hirata, Noboru Niguchi, Japan FF-007285: Design of a Magnetic Lead Screw for Wave Energy Conversion Rasmus Koldborg Holm, Nick Ilsoe Berg, Morten Walkusch, Peter Omand Rasmussen, Rico Hjerm Hansen, Denmark FF-008419: A Linear Magnetic Gear Robert C. Holehouse, Kais Atallah, Jiabin Wang, United Kingdom FF-011983: A High Absolute Thrust Permanent Magnet Linear Actuator for Direct Drive of Ship's Steering Gears: Concept and FEM Analysis Claudio Bruzzese, Italy SS5 - Modeling and control of high speed motors Room: Sugiton - Hour: 10:30-12:30 Co-chairs: Fabio Giulli Caponi, Martin Novak FF-005207: Performance characteristics of a high-speed energy-saving induction motor with an amorphous stator core Maria Dems, Krzysztof Komeza, Poland FF-005894: Modeling and optimal control of a hybrid excitation synchronous machine by Combining Analytical and Finite Element Models Abdeljalil Daanoune, Albert Foggia, Lauric Garbuio, Jean-Claude Mipo, Li Li, France FF-006645: Modeling and Comparison of Machine and Converter Losses for PWM and PAM in High-Speed Drives Lukas Schwager, Arda Tuysuz, Christof Zwyssig, Johann W. Kolar, Switzerland FF-007455: A Complex Frequency Domain Analysis of a Closed Loop Controlled Pseudo Direct Drive Mohammed Bouheraoua, Jiabin Wang, Kais Atallah, United Kingdom FF-007781: Experimental Verification of High-Speed Permanent Magnet Synchronous Motor Model Martin Novak, Jaroslav Novak, Jan Chysky, Czech Republic 52

FF-011258: Vector control of very-high-speed PM machines Aleksandar Borisavljevic, Maikel Brands, Elena Lomonova, Netherlands SS1 - Recent advancements in sensorless control of electrical machines Room: Sugiton - Hour: 14:00-16:00 Co-chairs: Frederik De Belie, Jan Melkebeek FF-000205: Saliency Investigation of Switched-Flux PM Brushless AC Machine for Saliency-Tracking-Based Sensorless Control T.C. Lin, L.M. Gong, Z.Q. Zhu, United Kingdom FF-004944: On-line Parameter Estimation for Improved Sensorless Control of Synchronous Motors Omar Scaglione, Miroslav Markovic, Yves Perriard, Switzerland FF-008915: Improved Rotor Position Estimation of Salient PMSM Using High Frequency Carrier Signal Injection Ouiza Mansouri-Toudert, H Zeroug, François Auger, Arezki Chibah, Algeria/France FF-011274: Small-Signal Finite-Element Modeling of Synchronous Machines for Sensorless Applications Luigi Alberti, Johan Gyselinck, Nicola Bianchi, Mattia Morandin, Silverio Bolognani, Italy/Blegium FF-009407: A Full-Sensorless Permanent Magnet Synchronous Motor Drive with an Enhanced Phase-Locked Loop Scheme Carlo Olivieri, Marco Tursini, Francesco Parasiliti, Italy FF-010006: Sensorless Position Estimation of Permanent-Magnet Synchronous Motors Using a Nonlinear Magnetic Saturation Model Al Kassem Jebai, François Malrait, Philippe Martin, Pierre Rouchon, France SS6 - Application and optimization of modern signal processing tools in electrical machines Room: Sugiton - Hour: 17:00-19:00 Co-chairs: Jose A. Antonino-Daviu, Martin Riera-Guasp FF-002593: Smart Sensor for Electrical Machine Monitoring through Statistical Analysis Eduardo Cabal-Yepez, Arturo A. Fernandez-Jaramillo, Rene J. RomeroTroncoso, Arturo Garcia-Perez, Roque A. Osornio-Rios, Mexico FF-003735: A Novel Condition Monitoring Scheme for Bearing Faults based on Curvilinear Component Analysis and Hierarchical Neural Networks Miguel Delgado, Giansalvo Cirrincione, Antoni García, Juan Antonio Ortega, Humberto Henao, Spain/France FF-005231: Rotor Fault Diagnosis in Asynchronous Machines via Analysis of the Start-Up Transient into Intrinsic Mode Functions George Georgoulas, Ioannis Tsoumas, Epaminondas Mitronikas, Chrysostomos Stylios, Athanasios Safacas, Greece 53

FF-006777: Vibration Transient Detection of Broken Bars by PSH Sidebands Vicente Climente-Alarcon, Jose Alfonso Antonino-Daviu, Francisco VedreñoSantos, Ruben Puche-Panadero, Spain FF-06998: Neural network broken bar detection using time domain and current spectrum data Pedro Esteban Gardel Sotomayor, Daniel Moríñigo-Sotelo, Oscar DuquePerez, Marcelo Perez-Alonso, Luis A. Garcia-Escudero, Spain FF-011207: Inter Turn Short Circuit Detection at Higher Modulation Indexes Including Six Step Operation Goran Stojcic, Gojko Joksimovic, Mario Vasak, Nedjeljko Peric, Thomas Wolbank, Austria/Montenegro/Croatia

54

Exhibitors Booth Number 1 2 3 4 5 6 7 8 9 10

Company Name CEDRAT - France CST - France Kienle + Spiess GmbH - Germany Infolytica Europe - United Kingdom Cobham Technical Services - United Kingdom Vesta System - France Motor Engineer SARL - France Université de Picardie « Jules Verne » - LTI/EESA - France JMAG Software - France Advanced MotorTech LLC - USA

55

56